Re: [PATCH 7/8] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files

[Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>]

On 10/08/2013 02:24 PM, Sebastian Hesselbarth wrote:
> This adds very basic device tree files for the Marvell Armada 1500 SoC
> (88DE3100) and the Sony NSZ-GS7 GoogleTV board. Currently, SoC only has
> nodes for cpus, some clocks, l2 cache controller, local timer, apb timers,
> uart, and interrupt controllers. The Sony NSZ-GS7 is a GoogleTV consumer
> device comprising the Armada 1500 SoC above.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Reviewed-by: Jason Cooper <jason@lakedaemon.net>
> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
> ---
> Changelog:
> RCFv2->v1:
> - switch to (soon to be) correct "marvell,pj4b" cpu compatible
> - reference fixed-clock for uarts instead of hard-coded clock-frequency
> - disable timers except two for clksrc and clkevt
> RFCv1->RFCv2:
> - add binding documentation (Reported by Jason Cooper)
> - change l2cc from aurora to tauros3 (Reported by Thomas Petazzoni)
> - add copyright reference
> - adapt compatibles to mach-berlin instead of mach-mvebu
>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: devicetree@vger.kernel.org
> Cc: linux-doc@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
>   .../devicetree/bindings/arm/marvell,berlin.txt     |   23 ++
>   arch/arm/boot/dts/Makefile                         |    2 +
>   arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts      |   29 +++
>   arch/arm/boot/dts/mv88de3100.dtsi                  |  227 ++++++++++++++++++++
>   4 files changed, 281 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/arm/marvell,berlin.txt
>   create mode 100644 arch/arm/boot/dts/mv88de3100-sony-nsz-gs7.dts
>   create mode 100644 arch/arm/boot/dts/mv88de3100.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
> new file mode 100644
> index 0000000..e389cba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
> @@ -0,0 +1,23 @@
> +Marvell Berlin (88DE3xxx) family SoCs Device Tree Bindings
> +---------------------------------------------------------------
> +
> +Boards with a SoC of the Marvell Berlin (88DE3xxx) family, e.g. Armada 1500
> +shall have the following properties:
> +
> +* Required root node properties:
> +compatible: must contain "marvell,berlin"
> +
> +In addition, the above compatible shall be extended with the specific
> +SoC and board used. Currently known SoC compatibles are:
> +    "marvell,88de3100"	for Marvell 88DE3100 (Armada 1500),
> +    "marvell,88de3010"	for Marvell 88DE3010 (Armada 1000),
> +    "marvell,88de3005"	for Marvell 88DE3005 (Armada 1500-mini)

Jisheng,

I am trying to follow your request to get rid of 88DExxxx numbering and
replace it where possible with berlin type-of names.

For the above, I have:
"marvell,berlin-bg2" for Marvell Armada 1500 (BG2, 88DE3100)
"marvell,berlin-bg2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005)

I cannot pin down Armada 1000 in the BG naming scheme. It would be great
if you provide info here on how Marvell would like to see the
compatibles.

Sebastian