From: George Cherian <george.cherian@ti.com>
To: George Cherian <george.cherian@ti.com>
Cc: <myungjoo.ham@samsung.com>, <cw00.choi@samsung.com>,
<kishon@ti.com>, <ldewangan@nvidia.com>,
<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>
Subject: Re: [PATCH] extcon: palmas: Handle ID interrupt properly using USB_ID_INT_SRC
Date: Tue, 15 Oct 2013 10:10:05 +0530 [thread overview]
Message-ID: <525CC725.7060508@ti.com> (raw)
In-Reply-To: <1381430919-4635-1-git-send-email-george.cherian@ti.com>
Laxman/Chanwoo/Kishon,
Any comments on this!!
Regards
-George
On 10/11/2013 12:18 AM, George Cherian wrote:
> Always cross check with the ID state and the source of interrupt.
> Also add a case in which ID Source is ID_GND but LATCH state is set
> wrongly. This uses the previous Link stat to determine the new state.
>
> Signed-off-by: George Cherian <george.cherian@ti.com>
> ---
> drivers/extcon/extcon-palmas.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
> index 6e83e9a..2aea4bc 100644
> --- a/drivers/extcon/extcon-palmas.c
> +++ b/drivers/extcon/extcon-palmas.c
> @@ -78,20 +78,24 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
>
> static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
> {
> - unsigned int set;
> + unsigned int set, id_src;
> struct palmas_usb *palmas_usb = _palmas_usb;
>
> palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
> PALMAS_USB_ID_INT_LATCH_SET, &set);
> + palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
> + PALMAS_USB_ID_INT_SRC, &id_src);
>
> - if (set & PALMAS_USB_ID_INT_SRC_ID_GND) {
> + if ((set & PALMAS_USB_ID_INT_SRC_ID_GND) &&
> + (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
> palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
> PALMAS_USB_ID_INT_LATCH_CLR,
> PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
> palmas_usb->linkstat = PALMAS_USB_STATE_ID;
> extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
> dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
> - } else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) {
> + } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
> + (id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
> palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
> PALMAS_USB_ID_INT_LATCH_CLR,
> PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
> @@ -103,6 +107,11 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
> palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
> extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
> dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
> + } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
> + (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
> + palmas_usb->linkstat = PALMAS_USB_STATE_ID;
> + extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
> + dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
> }
>
> return IRQ_HANDLED;
--
-George
next prev parent reply other threads:[~2013-10-15 4:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-10 18:48 [PATCH] extcon: palmas: Handle ID interrupt properly using USB_ID_INT_SRC George Cherian
2013-10-15 4:40 ` George Cherian [this message]
2013-10-21 11:21 ` Laxman Dewangan
2013-10-21 22:55 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525CC725.7060508@ti.com \
--to=george.cherian@ti.com \
--cc=cw00.choi@samsung.com \
--cc=kishon@ti.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox