* [PATCH v4 01/12] mrst: Fixed printk/pr_* related issues
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 02/12] mrst: Fixed indentation issues David Cohen
` (10 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixed printk and pr_* related issues in mrst related files.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/platform/mrst/early_printk_mrst.c | 2 +-
arch/x86/platform/mrst/mrst.c | 2 +-
arch/x86/platform/mrst/vrtc.c | 5 ++---
3 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 028454f..95880f7 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -213,7 +213,7 @@ static void early_mrst_spi_putc(char c)
}
if (!timeout)
- pr_warning("MRST earlycon: timed out\n");
+ pr_warn("MRST earlycon: timed out\n");
else
max3110_write_data(c);
}
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 3ca5957..b9aeb54 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -328,7 +328,7 @@ static inline int __init setup_x86_mrst_timer(char *arg)
else if (strcmp("lapic_and_apbt", arg) == 0)
mrst_timer_options = MRST_TIMER_LAPIC_APBT;
else {
- pr_warning("X86 MRST timer option %s not recognised"
+ pr_warn("X86 MRST timer option %s not recognised"
" use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
arg);
return -EINVAL;
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 5e355b1..ca4f7d9 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -79,7 +79,7 @@ void vrtc_get_time(struct timespec *now)
/* vRTC YEAR reg contains the offset to 1972 */
year += 1972;
- printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
+ pr_info("vRTC: sec: %d min: %d hour: %d day: %d "
"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
now->tv_sec = mktime(year, mon, mday, hour, min, sec);
@@ -109,8 +109,7 @@ int vrtc_set_mmss(const struct timespec *now)
vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
spin_unlock_irqrestore(&rtc_lock, flags);
} else {
- printk(KERN_ERR
- "%s: Invalid vRTC value: write of %lx to vRTC failed\n",
+ pr_err("%s: Invalid vRTC value: write of %lx to vRTC failed\n",
__FUNCTION__, now->tv_sec);
retval = -EINVAL;
}
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 02/12] mrst: Fixed indentation issues
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
2013-10-15 23:42 ` [PATCH v4 01/12] mrst: Fixed printk/pr_* related issues David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 03/12] mrst: Fixed checkpatch warnings David Cohen
` (9 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixed indentation issues reported by checkpatch script in
mrst related files.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/platform/mrst/early_printk_mrst.c | 3 ++-
arch/x86/platform/mrst/mrst.c | 24 +++++++++++++-----------
2 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 95880f7..39ecc27 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -219,7 +219,8 @@ static void early_mrst_spi_putc(char c)
}
/* Early SPI only uses polling mode */
-static void early_mrst_spi_write(struct console *con, const char *str, unsigned n)
+static void early_mrst_spi_write(struct console *con, const char *str,
+ unsigned n)
{
int i;
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index b9aeb54..235a742 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -131,7 +131,7 @@ struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
int i;
if (hint < sfi_mtimer_num) {
if (!sfi_mtimer_usage[hint]) {
- pr_debug("hint taken for timer %d irq %d\n",\
+ pr_debug("hint taken for timer %d irq %d\n",
hint, sfi_mtimer_array[hint].irq);
sfi_mtimer_usage[hint] = 1;
return &sfi_mtimer_array[hint];
@@ -679,14 +679,14 @@ static void *msic_thermal_platform_data(void *info)
/* tc35876x DSI-LVDS bridge chip and panel platform data */
static void *tc35876x_platform_data(void *data)
{
- static struct tc35876x_platform_data pdata;
+ static struct tc35876x_platform_data pdata;
- /* gpio pins set to -1 will not be used by the driver */
- pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
- pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
- pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+ /* gpio pins set to -1 will not be used by the driver */
+ pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
+ pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
+ pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
- return &pdata;
+ return &pdata;
}
static const struct devs_id __initconst device_ids[] = {
@@ -729,7 +729,7 @@ static int i2c_next_dev;
static void __init intel_scu_device_register(struct platform_device *pdev)
{
- if(ipc_next_dev == MAX_IPCDEVS)
+ if (ipc_next_dev == MAX_IPCDEVS)
pr_err("too many SCU IPC devices");
else
ipc_devs[ipc_next_dev++] = pdev;
@@ -872,7 +872,8 @@ static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
while (dev->name[0]) {
if (dev->type == SFI_DEV_TYPE_SPI &&
- !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) {
+ !strncmp(dev->name, spi_info->modalias,
+ SFI_NAME_LEN)) {
pdata = dev->get_platform_data(spi_info);
break;
}
@@ -904,7 +905,7 @@ static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
intel_scu_i2c_device_register(bus, i2c_info);
else
i2c_register_board_info(bus, i2c_info, 1);
- }
+}
static int __init sfi_parse_devs(struct sfi_table_header *table)
@@ -1034,7 +1035,8 @@ static int __init pb_keys_init(void)
num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
for (i = 0; i < num; i++) {
gb[i].gpio = get_gpio_by_name(gb[i].desc);
- pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, gb[i].gpio);
+ pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
+ gb[i].gpio);
if (gb[i].gpio == -1)
continue;
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 03/12] mrst: Fixed checkpatch warnings
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
2013-10-15 23:42 ` [PATCH v4 01/12] mrst: Fixed printk/pr_* related issues David Cohen
2013-10-15 23:42 ` [PATCH v4 02/12] mrst: Fixed indentation issues David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 04/12] intel_mid: Renamed *mrst* to *intel_mid* David Cohen
` (8 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixed checkpatch warnings in mrst related files.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/platform/mrst/mrst.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 235a742..2a45eab 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -977,7 +977,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
case SFI_DEV_TYPE_UART:
case SFI_DEV_TYPE_HSI:
default:
- ;
+ break;
}
}
return 0;
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 04/12] intel_mid: Renamed *mrst* to *intel_mid*
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (2 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 03/12] mrst: Fixed checkpatch warnings David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 05/12] " David Cohen
` (7 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen,
Matthew Garrett, Alessandro Zummo, Wim Van Sebroeck
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Following files contains code that is common to all intel mid
soc's. So renamed them as below.
mrst/mrst.c -> intel-mid/intel-mid.c
mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c
mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c
pci/mrst.c -> pci/intel_mid_pci.c
Also, renamed the corresponding header files and made changes
to the driver files that included these header files.
To ensure that there are no functional changes, I have compared
the objdump of renamed files before and after rename and found
that the only difference is file name change.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Wim Van Sebroeck <wim@iguana.be>
---
arch/x86/include/asm/{mrst.h => intel-mid.h} | 8 ++++----
arch/x86/include/asm/{mrst-vrtc.h => intel_mid_vrtc.h} | 4 ++--
arch/x86/kernel/apb_timer.c | 2 +-
arch/x86/kernel/early_printk.c | 2 +-
arch/x86/kernel/rtc.c | 2 +-
arch/x86/pci/Makefile | 2 +-
arch/x86/pci/{mrst.c => intel_mid_pci.c} | 2 +-
arch/x86/platform/Makefile | 2 +-
arch/x86/platform/intel-mid/Makefile | 3 +++
.../early_printk_intel_mid.c} | 4 ++--
arch/x86/platform/{mrst/mrst.c => intel-mid/intel-mid.c} | 11 ++++++-----
arch/x86/platform/{mrst/vrtc.c => intel-mid/intel_mid_vrtc.c} | 6 +++---
arch/x86/platform/mrst/Makefile | 3 ---
drivers/gpu/drm/gma500/mdfld_dsi_output.h | 2 +-
drivers/gpu/drm/gma500/oaktrail_device.c | 2 +-
drivers/gpu/drm/gma500/oaktrail_lvds.c | 2 +-
drivers/platform/x86/intel_scu_ipc.c | 2 +-
drivers/rtc/rtc-mrst.c | 4 ++--
drivers/watchdog/intel_scu_watchdog.c | 2 +-
19 files changed, 33 insertions(+), 32 deletions(-)
rename arch/x86/include/asm/{mrst.h => intel-mid.h} (93%)
rename arch/x86/include/asm/{mrst-vrtc.h => intel_mid_vrtc.h} (81%)
rename arch/x86/pci/{mrst.c => intel_mid_pci.c} (99%)
create mode 100644 arch/x86/platform/intel-mid/Makefile
rename arch/x86/platform/{mrst/early_printk_mrst.c => intel-mid/early_printk_intel_mid.c} (98%)
rename arch/x86/platform/{mrst/mrst.c => intel-mid/intel-mid.c} (99%)
rename arch/x86/platform/{mrst/vrtc.c => intel-mid/intel_mid_vrtc.c} (97%)
delete mode 100644 arch/x86/platform/mrst/Makefile
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/intel-mid.h
similarity index 93%
rename from arch/x86/include/asm/mrst.h
rename to arch/x86/include/asm/intel-mid.h
index fc18bf3..cc79a4f 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -1,5 +1,5 @@
/*
- * mrst.h: Intel Moorestown platform specific setup code
+ * intel-mid.h: Intel MID specific setup code
*
* (C) Copyright 2009 Intel Corporation
*
@@ -8,8 +8,8 @@
* as published by the Free Software Foundation; version 2
* of the License.
*/
-#ifndef _ASM_X86_MRST_H
-#define _ASM_X86_MRST_H
+#ifndef _ASM_X86_INTEL_MID_H
+#define _ASM_X86_INTEL_MID_H
#include <linux/sfi.h>
@@ -78,4 +78,4 @@ extern void intel_scu_devices_destroy(void);
extern void mrst_rtc_init(void);
-#endif /* _ASM_X86_MRST_H */
+#endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/intel_mid_vrtc.h
similarity index 81%
rename from arch/x86/include/asm/mrst-vrtc.h
rename to arch/x86/include/asm/intel_mid_vrtc.h
index 1e69a75..86ff468 100644
--- a/arch/x86/include/asm/mrst-vrtc.h
+++ b/arch/x86/include/asm/intel_mid_vrtc.h
@@ -1,5 +1,5 @@
-#ifndef _MRST_VRTC_H
-#define _MRST_VRTC_H
+#ifndef _INTEL_MID_VRTC_H
+#define _INTEL_MID_VRTC_H
extern unsigned char vrtc_cmos_read(unsigned char reg);
extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index c9876ef..9154836 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -40,7 +40,7 @@
#include <asm/fixmap.h>
#include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/time.h>
#define APBT_CLOCKEVENT_RATING 110
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index d15f575..38ca398 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -14,7 +14,7 @@
#include <xen/hvc-console.h>
#include <asm/pci-direct.h>
#include <asm/fixmap.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/pgtable.h>
#include <linux/usb/ehci_def.h>
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 0aa2939..a1b52fe 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -12,7 +12,7 @@
#include <asm/vsyscall.h>
#include <asm/x86_init.h>
#include <asm/time.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/rtc.h>
#ifdef CONFIG_X86_32
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index ee0af58..e063eed 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_X86_VISWS) += visws.o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
-obj-$(CONFIG_X86_INTEL_MID) += mrst.o
+obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o
obj-y += common.o early.o
obj-y += bus_numa.o
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/intel_mid_pci.c
similarity index 99%
rename from arch/x86/pci/mrst.c
rename to arch/x86/pci/intel_mid_pci.c
index 903fded..f8715f7 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -1,5 +1,5 @@
/*
- * Moorestown PCI support
+ * Intel MID PCI support
* Copyright (c) 2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 01e0231..20342d4 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -4,7 +4,7 @@ obj-y += efi/
obj-y += geode/
obj-y += goldfish/
obj-y += iris/
-obj-y += mrst/
+obj-y += intel-mid/
obj-y += olpc/
obj-y += scx200/
obj-y += sfi/
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
new file mode 100644
index 0000000..de29635
--- /dev/null
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
+obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
similarity index 98%
rename from arch/x86/platform/mrst/early_printk_mrst.c
rename to arch/x86/platform/intel-mid/early_printk_intel_mid.c
index 39ecc27..7c56e70 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -1,5 +1,5 @@
/*
- * early_printk_mrst.c - early consoles for Intel MID platforms
+ * early_printk_intel_mid.c - early consoles for Intel MID platforms
*
* Copyright (c) 2008-2010, Intel Corporation
*
@@ -27,7 +27,7 @@
#include <asm/fixmap.h>
#include <asm/pgtable.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#define MRST_SPI_TIMEOUT 0x200000
#define MRST_REGBASE_SPI0 0xff128000
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/intel-mid/intel-mid.c
similarity index 99%
rename from arch/x86/platform/mrst/mrst.c
rename to arch/x86/platform/intel-mid/intel-mid.c
index 2a45eab..0f39c4b 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -1,8 +1,9 @@
/*
- * mrst.c: Intel Moorestown platform specific setup code
+ * intel-mid.c: Intel MID platform setup code
*
- * (C) Copyright 2008 Intel Corporation
+ * (C) Copyright 2008, 2012 Intel Corporation
* Author: Jacob Pan (jacob.jun.pan@intel.com)
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -36,8 +37,8 @@
#include <asm/hw_irq.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/intel_scu_ipc.h>
@@ -219,7 +220,7 @@ static unsigned long __init mrst_calibrate_tsc(void)
lapic_timer_frequency = fsb * 1000 / HZ;
/* mark tsc clocksource as reliable */
set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-
+
if (fast_calibrate)
return fast_calibrate;
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
similarity index 97%
rename from arch/x86/platform/mrst/vrtc.c
rename to arch/x86/platform/intel-mid/intel_mid_vrtc.c
index ca4f7d9..ded9fbd 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
@@ -1,5 +1,5 @@
/*
- * vrtc.c: Driver for virtual RTC device on Intel MID platform
+ * intel_mid_vrtc.c: Driver for virtual RTC device on Intel MID platform
*
* (C) Copyright 2009 Intel Corporation
*
@@ -23,8 +23,8 @@
#include <linux/sfi.h>
#include <linux/platform_device.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
#include <asm/time.h>
#include <asm/fixmap.h>
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
deleted file mode 100644
index af1da7e..0000000
--- a/arch/x86/platform/mrst/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_X86_INTEL_MID) += mrst.o
-obj-$(CONFIG_X86_INTEL_MID) += vrtc.o
-obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o
diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
index 45d5af0..5b646c1 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h
@@ -39,7 +39,7 @@
#include "psb_intel_reg.h"
#include "mdfld_output.h"
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end))
#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 08747fd..7a9ce00 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -26,7 +26,7 @@
#include "psb_drv.h"
#include "psb_reg.h"
#include "psb_intel_reg.h"
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>
#include "mid_bios.h"
#include "intel_bios.h"
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c
index e77d721..3ece553 100644
--- a/drivers/gpu/drm/gma500/oaktrail_lvds.c
+++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c
@@ -22,7 +22,7 @@
#include <linux/i2c.h>
#include <drm/drmP.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include "intel_bios.h"
#include "psb_drv.h"
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 9215ed7..5f8f6c9 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -25,7 +25,7 @@
#include <linux/interrupt.h>
#include <linux/sfi.h>
#include <linux/module.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>
/* IPC defines the following message types */
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 578baf9..315209d9 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -38,8 +38,8 @@
#include <asm-generic/rtc.h>
#include <asm/intel_scu_ipc.h>
-#include <asm/mrst.h>
-#include <asm/mrst-vrtc.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
struct mrst_rtc {
struct rtc_device *rtc;
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 9dda2d0..07964d8 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -48,7 +48,7 @@
#include <linux/atomic.h>
#include <asm/intel_scu_ipc.h>
#include <asm/apb_timer.h>
-#include <asm/mrst.h>
+#include <asm/intel-mid.h>
#include "intel_scu_watchdog.h"
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 05/12] intel_mid: Renamed *mrst* to *intel_mid*
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (3 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 04/12] intel_mid: Renamed *mrst* to *intel_mid* David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 06/12] intel_mid: Refactored sfi_parse_devs() function David Cohen
` (6 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
mrst is used as common name to represent all intel_mid type
soc's. But moorsetwon is just one of the intel_mid soc. So
renamed them to use intel_mid.
This patch mainly renames the variables and related
functions that uses *mrst* prefix with *intel_mid*.
To ensure that there are no functional changes, I have compared
the objdump of related files before and after rename and found
the only difference is symbol and name changes.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
Documentation/kernel-parameters.txt | 6 +-
arch/x86/include/asm/intel-mid.h | 26 ++---
arch/x86/include/asm/setup.h | 4 +-
arch/x86/include/uapi/asm/bootparam.h | 2 +-
arch/x86/kernel/apb_timer.c | 8 +-
arch/x86/kernel/head32.c | 4 +-
arch/x86/kernel/rtc.c | 2 +-
arch/x86/pci/intel_mid_pci.c | 12 +--
.../platform/intel-mid/early_printk_intel_mid.c | 2 +-
arch/x86/platform/intel-mid/intel-mid.c | 109 ++++++++++-----------
arch/x86/platform/intel-mid/intel_mid_vrtc.c | 8 +-
drivers/platform/x86/intel_scu_ipc.c | 2 +-
drivers/watchdog/intel_scu_watchdog.c | 2 +-
13 files changed, 93 insertions(+), 94 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fcbb736..dfaeb0c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3471,11 +3471,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
default x2apic cluster mode on platforms
supporting x2apic.
- x86_mrst_timer= [X86-32,APBT]
- Choose timer option for x86 Moorestown MID platform.
+ x86_intel_mid_timer= [X86-32,APBT]
+ Choose timer option for x86 Intel MID platform.
Two valid options are apbt timer only and lapic timer
plus one apbt timer for broadcast timer.
- x86_mrst_timer=apbt_only | lapic_and_apbt
+ x86_intel_mid_timer=apbt_only | lapic_and_apbt
xen_emul_unplug= [HW,X86,XEN]
Unplug Xen emulated devices
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index cc79a4f..beb7a5f 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -13,7 +13,7 @@
#include <linux/sfi.h>
-extern int pci_mrst_init(void);
+extern int intel_mid_pci_init(void);
extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
extern int sfi_mrtc_num;
extern struct sfi_rtc_table_entry sfi_mrtc_array[];
@@ -25,33 +25,33 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[];
* we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
* identified via MSRs.
*/
-enum mrst_cpu_type {
+enum intel_mid_cpu_type {
/* 1 was Moorestown */
- MRST_CPU_CHIP_PENWELL = 2,
+ INTEL_MID_CPU_CHIP_PENWELL = 2,
};
-extern enum mrst_cpu_type __mrst_cpu_chip;
+extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
#ifdef CONFIG_X86_INTEL_MID
-static inline enum mrst_cpu_type mrst_identify_cpu(void)
+static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
{
- return __mrst_cpu_chip;
+ return __intel_mid_cpu_chip;
}
#else /* !CONFIG_X86_INTEL_MID */
-#define mrst_identify_cpu() (0)
+#define intel_mid_identify_cpu() (0)
#endif /* !CONFIG_X86_INTEL_MID */
-enum mrst_timer_options {
- MRST_TIMER_DEFAULT,
- MRST_TIMER_APBT_ONLY,
- MRST_TIMER_LAPIC_APBT,
+enum intel_mid_timer_options {
+ INTEL_MID_TIMER_DEFAULT,
+ INTEL_MID_TIMER_APBT_ONLY,
+ INTEL_MID_TIMER_LAPIC_APBT,
};
-extern enum mrst_timer_options mrst_timer_options;
+extern enum intel_mid_timer_options intel_mid_timer_options;
/*
* Penwell uses spread spectrum clock, so the freq number is not exactly
@@ -76,6 +76,6 @@ extern void intel_scu_devices_destroy(void);
#define MRST_VRTC_MAP_SZ (1024)
/*#define MRST_VRTC_PGOFFSET (0xc00) */
-extern void mrst_rtc_init(void);
+extern void intel_mid_rtc_init(void);
#endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 3475554..59bcf4e 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -51,9 +51,9 @@ extern void i386_reserve_resources(void);
extern void setup_default_timer_irq(void);
#ifdef CONFIG_X86_INTEL_MID
-extern void x86_mrst_early_setup(void);
+extern void x86_intel_mid_early_setup(void);
#else
-static inline void x86_mrst_early_setup(void) { }
+static inline void x86_intel_mid_early_setup(void) { }
#endif
#ifdef CONFIG_X86_INTEL_CE
diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
index c15ddaf..9c3733c 100644
--- a/arch/x86/include/uapi/asm/bootparam.h
+++ b/arch/x86/include/uapi/asm/bootparam.h
@@ -158,7 +158,7 @@ enum {
X86_SUBARCH_PC = 0,
X86_SUBARCH_LGUEST,
X86_SUBARCH_XEN,
- X86_SUBARCH_MRST,
+ X86_SUBARCH_INTEL_MID,
X86_SUBARCH_CE4100,
X86_NR_SUBARCHS,
};
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 9154836..af5b08a 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -157,13 +157,13 @@ static int __init apbt_clockevent_register(void)
adev->num = smp_processor_id();
adev->timer = dw_apb_clockevent_init(smp_processor_id(), "apbt0",
- mrst_timer_options == MRST_TIMER_LAPIC_APBT ?
+ intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ?
APBT_CLOCKEVENT_RATING - 100 : APBT_CLOCKEVENT_RATING,
adev_virt_addr(adev), 0, apbt_freq);
/* Firmware does EOI handling for us. */
adev->timer->eoi = NULL;
- if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
+ if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
global_clock_event = &adev->timer->ced;
printk(KERN_DEBUG "%s clockevent registered as global\n",
global_clock_event->name);
@@ -253,7 +253,7 @@ static int apbt_cpuhp_notify(struct notifier_block *n,
static __init int apbt_late_init(void)
{
- if (mrst_timer_options == MRST_TIMER_LAPIC_APBT ||
+ if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ||
!apb_timer_block_enabled)
return 0;
/* This notifier should be called after workqueue is ready */
@@ -340,7 +340,7 @@ void __init apbt_time_init(void)
}
#ifdef CONFIG_SMP
/* kernel cmdline disable apb timer, so we will use lapic timers */
- if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
+ if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
printk(KERN_INFO "apbt: disabled per cpu timer\n");
return;
}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 06f87be..c61a14a 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -35,8 +35,8 @@ asmlinkage void __init i386_start_kernel(void)
/* Call the subarch specific early setup function */
switch (boot_params.hdr.hardware_subarch) {
- case X86_SUBARCH_MRST:
- x86_mrst_early_setup();
+ case X86_SUBARCH_INTEL_MID:
+ x86_intel_mid_early_setup();
break;
case X86_SUBARCH_CE4100:
x86_ce4100_early_setup();
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index a1b52fe..e35cb18 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -189,7 +189,7 @@ static __init int add_rtc_cmos(void)
return 0;
/* Intel MID platforms don't have ioport rtc */
- if (mrst_identify_cpu())
+ if (intel_mid_identify_cpu())
return -ENODEV;
platform_device_register(&rtc_device);
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index f8715f7..96fe0d0 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -205,7 +205,7 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
where, size, value);
}
-static int mrst_pci_irq_enable(struct pci_dev *dev)
+static int intel_mid_pci_irq_enable(struct pci_dev *dev)
{
u8 pin;
struct io_apic_irq_attr irq_attr;
@@ -225,23 +225,23 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
return 0;
}
-struct pci_ops pci_mrst_ops = {
+struct pci_ops intel_mid_pci_ops = {
.read = pci_read,
.write = pci_write,
};
/**
- * pci_mrst_init - installs pci_mrst_ops
+ * intel_mid_pci_init - installs intel_mid_pci_ops
*
* Moorestown has an interesting PCI implementation (see above).
* Called when the early platform detection installs it.
*/
-int __init pci_mrst_init(void)
+int __init intel_mid_pci_init(void)
{
pr_info("Intel MID platform detected, using MID PCI ops\n");
pci_mmcfg_late_init();
- pcibios_enable_irq = mrst_pci_irq_enable;
- pci_root_ops = pci_mrst_ops;
+ pcibios_enable_irq = intel_mid_pci_irq_enable;
+ pci_root_ops = intel_mid_pci_ops;
pci_soc_mode = 1;
/* Continue with standard init */
return 1;
diff --git a/arch/x86/platform/intel-mid/early_printk_intel_mid.c b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
index 7c56e70..4f702f5 100644
--- a/arch/x86/platform/intel-mid/early_printk_intel_mid.c
+++ b/arch/x86/platform/intel-mid/early_printk_intel_mid.c
@@ -152,7 +152,7 @@ void mrst_early_console_init(void)
spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
freq = 100000000 / (spi0_cdiv + 1);
- if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+ if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL)
mrst_spi_paddr = MRST_REGBASE_SPI1;
pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 0f39c4b..742b7bf 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -11,7 +11,7 @@
* of the License.
*/
-#define pr_fmt(fmt) "mrst: " fmt
+#define pr_fmt(fmt) "intel_mid: " fmt
#include <linux/init.h>
#include <linux/kernel.h>
@@ -47,7 +47,7 @@
/*
* the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
- * cmdline option x86_mrst_timer can be used to override the configuration
+ * cmdline option x86_intel_mid_timer can be used to override the configuration
* to prefer one or the other.
* at runtime, there are basically three timer configurations:
* 1. per cpu apbt clock only
@@ -66,12 +66,12 @@
* lapic (always-on,ARAT) ------ 150
*/
-enum mrst_timer_options mrst_timer_options;
+enum intel_mid_timer_options intel_mid_timer_options;
static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
-enum mrst_cpu_type __mrst_cpu_chip;
-EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
+enum intel_mid_cpu_type __intel_mid_cpu_chip;
+EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
int sfi_mtimer_num;
@@ -79,11 +79,11 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
EXPORT_SYMBOL_GPL(sfi_mrtc_array);
int sfi_mrtc_num;
-static void mrst_power_off(void)
+static void intel_mid_power_off(void)
{
}
-static void mrst_reboot(void)
+static void intel_mid_reboot(void)
{
intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
}
@@ -196,7 +196,7 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
return 0;
}
-static unsigned long __init mrst_calibrate_tsc(void)
+static unsigned long __init intel_mid_calibrate_tsc(void)
{
unsigned long fast_calibrate;
u32 lo, hi, ratio, fsb;
@@ -227,13 +227,13 @@ static unsigned long __init mrst_calibrate_tsc(void)
return 0;
}
-static void __init mrst_time_init(void)
+static void __init intel_mid_time_init(void)
{
sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
- switch (mrst_timer_options) {
- case MRST_TIMER_APBT_ONLY:
+ switch (intel_mid_timer_options) {
+ case INTEL_MID_TIMER_APBT_ONLY:
break;
- case MRST_TIMER_LAPIC_APBT:
+ case INTEL_MID_TIMER_LAPIC_APBT:
x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
break;
@@ -249,19 +249,19 @@ static void __init mrst_time_init(void)
apbt_time_init();
}
-static void mrst_arch_setup(void)
+static void __cpuinit intel_mid_arch_setup(void)
{
if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
- __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+ __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
else {
pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
boot_cpu_data.x86, boot_cpu_data.x86_model);
- __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+ __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
}
}
/* MID systems don't have i8042 controller */
-static int mrst_i8042_detect(void)
+static int intel_mid_i8042_detect(void)
{
return 0;
}
@@ -272,7 +272,7 @@ static int mrst_i8042_detect(void)
* watchdog or lock debug. Reading io port 0x61 results in 0xff which
* misled NMI handler.
*/
-static unsigned char mrst_get_nmi_reason(void)
+static unsigned char intel_mid_get_nmi_reason(void)
{
return 0;
}
@@ -281,33 +281,32 @@ static unsigned char mrst_get_nmi_reason(void)
* Moorestown specific x86_init function overrides and early setup
* calls.
*/
-void __init x86_mrst_early_setup(void)
+void __init x86_intel_mid_early_setup(void)
{
x86_init.resources.probe_roms = x86_init_noop;
x86_init.resources.reserve_resources = x86_init_noop;
- x86_init.timers.timer_init = mrst_time_init;
+ x86_init.timers.timer_init = intel_mid_time_init;
x86_init.timers.setup_percpu_clockev = x86_init_noop;
x86_init.irqs.pre_vector_init = x86_init_noop;
- x86_init.oem.arch_setup = mrst_arch_setup;
+ x86_init.oem.arch_setup = intel_mid_arch_setup;
x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
- x86_platform.calibrate_tsc = mrst_calibrate_tsc;
- x86_platform.i8042_detect = mrst_i8042_detect;
- x86_init.timers.wallclock_init = mrst_rtc_init;
- x86_platform.get_nmi_reason = mrst_get_nmi_reason;
+ x86_platform.calibrate_tsc = intel_mid_calibrate_tsc;
+ x86_platform.i8042_detect = intel_mid_i8042_detect;
+ x86_init.timers.wallclock_init = intel_mid_rtc_init;
+ x86_platform.get_nmi_reason = intel_mid_get_nmi_reason;
- x86_init.pci.init = pci_mrst_init;
+ x86_init.pci.init = intel_mid_pci_init;
x86_init.pci.fixup_irqs = x86_init_noop;
legacy_pic = &null_legacy_pic;
- /* Moorestown specific power_off/restart method */
- pm_power_off = mrst_power_off;
- machine_ops.emergency_restart = mrst_reboot;
+ pm_power_off = intel_mid_power_off;
+ machine_ops.emergency_restart = intel_mid_reboot;
/* Avoid searching for BIOS MP tables */
x86_init.mpparse.find_smp_config = x86_init_noop;
@@ -319,24 +318,24 @@ void __init x86_mrst_early_setup(void)
* if user does not want to use per CPU apb timer, just give it a lower rating
* than local apic timer and skip the late per cpu timer init.
*/
-static inline int __init setup_x86_mrst_timer(char *arg)
+static inline int __init setup_x86_intel_mid_timer(char *arg)
{
if (!arg)
return -EINVAL;
if (strcmp("apbt_only", arg) == 0)
- mrst_timer_options = MRST_TIMER_APBT_ONLY;
+ intel_mid_timer_options = INTEL_MID_TIMER_APBT_ONLY;
else if (strcmp("lapic_and_apbt", arg) == 0)
- mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+ intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT;
else {
- pr_warn("X86 MRST timer option %s not recognised"
- " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+ pr_warn("X86 INTEL_MID timer option %s not recognised"
+ " use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n",
arg);
return -EINVAL;
}
return 0;
}
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
/*
* Parsing GPIO table first, since the DEVS table will need this table
@@ -400,7 +399,7 @@ struct devs_id {
};
/* the offset for the mapping of global gpio pin to irq */
-#define MRST_IRQ_OFFSET 0x100
+#define INTEL_MID_IRQ_OFFSET 0x100
static void __init *pmic_gpio_platform_data(void *info)
{
@@ -410,7 +409,7 @@ static void __init *pmic_gpio_platform_data(void *info)
if (gpio_base == -1)
gpio_base = 64;
pmic_gpio_pdata.gpio_base = gpio_base;
- pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+ pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
pmic_gpio_pdata.gpiointr = 0xffffeff8;
return &pmic_gpio_pdata;
@@ -424,7 +423,7 @@ static void __init *max3111_platform_data(void *info)
spi_info->mode = SPI_MODE_0;
if (intr == -1)
return NULL;
- spi_info->irq = intr + MRST_IRQ_OFFSET;
+ spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
return NULL;
}
@@ -464,8 +463,8 @@ static void __init *max7315_platform_data(void *info)
return NULL;
max7315->gpio_base = gpio_base;
if (intr != -1) {
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
} else {
i2c_info->irq = -1;
max7315->irq_base = -1;
@@ -492,8 +491,8 @@ static void *tca6416_platform_data(void *info)
return NULL;
tca6416.gpio_base = gpio_base;
if (intr != -1) {
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
} else {
i2c_info->irq = -1;
tca6416.irq_base = -1;
@@ -509,7 +508,7 @@ static void *mpu3050_platform_data(void *info)
if (intr == -1)
return NULL;
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
return NULL;
}
@@ -523,8 +522,8 @@ static void __init *emc1403_platform_data(void *info)
if (intr == -1 || intr2nd == -1)
return NULL;
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
return &intr2nd_pdata;
}
@@ -539,8 +538,8 @@ static void __init *lis331dl_platform_data(void *info)
if (intr == -1 || intr2nd == -1)
return NULL;
- i2c_info->irq = intr + MRST_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
return &intr2nd_pdata;
}
@@ -570,9 +569,9 @@ static struct platform_device msic_device = {
.resource = msic_resources,
};
-static inline bool mrst_has_msic(void)
+static inline bool intel_mid_has_msic(void)
{
- return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+ return intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL;
}
static int msic_scu_status_change(struct notifier_block *nb,
@@ -596,7 +595,7 @@ static int __init msic_init(void)
* We need to be sure that the SCU IPC is ready before MSIC device
* can be registered.
*/
- if (mrst_has_msic())
+ if (intel_mid_has_msic())
intel_scu_notifier_add(&msic_scu_notifier);
return 0;
@@ -851,7 +850,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
* On Medfield the platform device creation is handled by the MSIC
* MFD driver so we don't need to do it here.
*/
- if (mrst_has_msic())
+ if (intel_mid_has_msic())
return;
pdev = platform_device_alloc(entry->name, 0);
@@ -984,13 +983,13 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
return 0;
}
-static int __init mrst_platform_init(void)
+static int __init intel_mid_platform_init(void)
{
sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
return 0;
}
-arch_initcall(mrst_platform_init);
+arch_initcall(intel_mid_platform_init);
/*
* we will search these buttons in SFI GPIO table (by name)
@@ -1010,7 +1009,7 @@ static struct gpio_keys_button gpio_button[] = {
{SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
};
-static struct gpio_keys_platform_data mrst_gpio_keys = {
+static struct gpio_keys_platform_data intel_mid_gpio_keys = {
.buttons = gpio_button,
.rep = 1,
.nbuttons = -1, /* will fill it after search */
@@ -1020,7 +1019,7 @@ static struct platform_device pb_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
- .platform_data = &mrst_gpio_keys,
+ .platform_data = &intel_mid_gpio_keys,
},
};
@@ -1047,7 +1046,7 @@ static int __init pb_keys_init(void)
}
if (good) {
- mrst_gpio_keys.nbuttons = good;
+ intel_mid_gpio_keys.nbuttons = good;
return platform_device_register(&pb_device);
}
return 0;
diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
index ded9fbd..4762cff 100644
--- a/arch/x86/platform/intel-mid/intel_mid_vrtc.c
+++ b/arch/x86/platform/intel-mid/intel_mid_vrtc.c
@@ -116,7 +116,7 @@ int vrtc_set_mmss(const struct timespec *now)
return retval;
}
-void __init mrst_rtc_init(void)
+void __init intel_mid_rtc_init(void)
{
unsigned long vrtc_paddr;
@@ -154,10 +154,10 @@ static struct platform_device vrtc_device = {
};
/* Register the RTC device if appropriate */
-static int __init mrst_device_create(void)
+static int __init intel_mid_device_create(void)
{
/* No Moorestown, no device */
- if (!mrst_identify_cpu())
+ if (!intel_mid_identify_cpu())
return -ENODEV;
/* No timer, no device */
if (!sfi_mrtc_num)
@@ -174,4 +174,4 @@ static int __init mrst_device_create(void)
return platform_device_register(&vrtc_device);
}
-module_init(mrst_device_create);
+module_init(intel_mid_device_create);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 5f8f6c9..d654f83 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -579,7 +579,7 @@ static struct pci_driver ipc_driver = {
static int __init intel_scu_ipc_init(void)
{
- platform = mrst_identify_cpu();
+ platform = intel_mid_identify_cpu();
if (platform == 0)
return -ENODEV;
return pci_register_driver(&ipc_driver);
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 07964d8..8ced256 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -445,7 +445,7 @@ static int __init intel_scu_watchdog_init(void)
*
* If it isn't an intel MID device then it doesn't have this watchdog
*/
- if (!mrst_identify_cpu())
+ if (!intel_mid_identify_cpu())
return -ENODEV;
/* Check boot parameters to verify that their initial values */
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 06/12] intel_mid: Refactored sfi_parse_devs() function
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (4 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 05/12] " David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 07/12] intel_mid: Added custom device_handler support David Cohen
` (5 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
SFI device_id[] table parsing code is duplicated in every SFI
device handler. This patch removes this code duplication, by
adding a seperate function get_device_id() to parse through the
device table. Also this patch moves the SPI, I2C, IPC info code from
sfi_parse_devs() to respective device handlers.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/platform/intel-mid/intel-mid.c | 141 ++++++++++++++++----------------
1 file changed, 71 insertions(+), 70 deletions(-)
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 742b7bf..f9c4be8 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -831,20 +831,15 @@ static void __init install_irq_resource(struct platform_device *pdev, int irq)
platform_device_add_resources(pdev, &res, 1);
}
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
{
- const struct devs_id *dev = device_ids;
struct platform_device *pdev;
void *pdata = NULL;
- while (dev->name[0]) {
- if (dev->type == SFI_DEV_TYPE_IPC &&
- !strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(entry);
- break;
- }
- dev++;
- }
+ pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+ pentry->name, pentry->irq);
+ pdata = dev->get_platform_data(pentry);
/*
* On Medfield the platform device creation is handled by the MSIC
@@ -853,68 +848,94 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
if (intel_mid_has_msic())
return;
- pdev = platform_device_alloc(entry->name, 0);
+ pdev = platform_device_alloc(pentry->name, 0);
if (pdev == NULL) {
pr_err("out of memory for SFI platform device '%s'.\n",
- entry->name);
+ pentry->name);
return;
}
- install_irq_resource(pdev, entry->irq);
+ install_irq_resource(pdev, pentry->irq);
pdev->dev.platform_data = pdata;
intel_scu_device_register(pdev);
}
-static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
{
- const struct devs_id *dev = device_ids;
+ struct spi_board_info spi_info;
void *pdata = NULL;
- while (dev->name[0]) {
- if (dev->type == SFI_DEV_TYPE_SPI &&
- !strncmp(dev->name, spi_info->modalias,
- SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(spi_info);
- break;
- }
- dev++;
- }
- spi_info->platform_data = pdata;
+ memset(&spi_info, 0, sizeof(spi_info));
+ strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+ spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+ spi_info.bus_num = pentry->host_num;
+ spi_info.chip_select = pentry->addr;
+ spi_info.max_speed_hz = pentry->max_freq;
+ pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
+ spi_info.bus_num,
+ spi_info.modalias,
+ spi_info.irq,
+ spi_info.max_speed_hz,
+ spi_info.chip_select);
+
+ pdata = dev->get_platform_data(&spi_info);
+
+ spi_info.platform_data = pdata;
if (dev->delay)
- intel_scu_spi_device_register(spi_info);
+ intel_scu_spi_device_register(&spi_info);
else
- spi_register_board_info(spi_info, 1);
+ spi_register_board_info(&spi_info, 1);
}
-static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
{
- const struct devs_id *dev = device_ids;
+ struct i2c_board_info i2c_info;
void *pdata = NULL;
+ memset(&i2c_info, 0, sizeof(i2c_info));
+ strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+ i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+ i2c_info.addr = pentry->addr;
+ pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
+ pentry->host_num,
+ i2c_info.type,
+ i2c_info.irq,
+ i2c_info.addr);
+ pdata = dev->get_platform_data(&i2c_info);
+ i2c_info.platform_data = pdata;
+
+ if (dev->delay)
+ intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
+ else
+ i2c_register_board_info(pentry->host_num, &i2c_info, 1);
+}
+
+static struct devs_id __init *get_device_id(u8 type, char *name)
+{
+ struct devs_id *dev = device_ids;
+
+ if (device_ids == NULL)
+ return NULL;
+
while (dev->name[0]) {
- if (dev->type == SFI_DEV_TYPE_I2C &&
- !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(i2c_info);
- break;
+ if (dev->type == type &&
+ !strncmp(dev->name, name, SFI_NAME_LEN)) {
+ return dev;
}
dev++;
}
- i2c_info->platform_data = pdata;
- if (dev->delay)
- intel_scu_i2c_device_register(bus, i2c_info);
- else
- i2c_register_board_info(bus, i2c_info, 1);
+ return NULL;
}
-
static int __init sfi_parse_devs(struct sfi_table_header *table)
{
struct sfi_table_simple *sb;
struct sfi_device_table_entry *pentry;
- struct spi_board_info spi_info;
- struct i2c_board_info i2c_info;
- int num, i, bus;
+ struct devs_id *dev = NULL;
+ int num, i;
int ioapic;
struct io_apic_irq_attr irq_attr;
@@ -939,40 +960,20 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
} else
irq = 0; /* No irq */
+ dev = get_device_id(pentry->type, pentry->name);
+
+ if ((dev == NULL) || (dev->get_platform_data == NULL))
+ continue;
+
switch (pentry->type) {
case SFI_DEV_TYPE_IPC:
- pr_debug("info[%2d]: IPC bus, name = %16.16s, "
- "irq = 0x%2x\n", i, pentry->name, pentry->irq);
- sfi_handle_ipc_dev(pentry);
+ sfi_handle_ipc_dev(pentry, dev);
break;
case SFI_DEV_TYPE_SPI:
- memset(&spi_info, 0, sizeof(spi_info));
- strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = irq;
- spi_info.bus_num = pentry->host_num;
- spi_info.chip_select = pentry->addr;
- spi_info.max_speed_hz = pentry->max_freq;
- pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
- "irq = 0x%2x, max_freq = %d, cs = %d\n", i,
- spi_info.bus_num,
- spi_info.modalias,
- spi_info.irq,
- spi_info.max_speed_hz,
- spi_info.chip_select);
- sfi_handle_spi_dev(&spi_info);
+ sfi_handle_spi_dev(pentry, dev);
break;
case SFI_DEV_TYPE_I2C:
- memset(&i2c_info, 0, sizeof(i2c_info));
- bus = pentry->host_num;
- strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = irq;
- i2c_info.addr = pentry->addr;
- pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
- "irq = 0x%2x, addr = 0x%x\n", i, bus,
- i2c_info.type,
- i2c_info.irq,
- i2c_info.addr);
- sfi_handle_i2c_dev(bus, &i2c_info);
+ sfi_handle_i2c_dev(pentry, dev);
break;
case SFI_DEV_TYPE_UART:
case SFI_DEV_TYPE_HSI:
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 07/12] intel_mid: Added custom device_handler support
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (5 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 06/12] intel_mid: Refactored sfi_parse_devs() function David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 08/12] intel_mid: Added custom handler for ipc devices David Cohen
` (4 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
This patch provides a means to add custom handler for
SFI devices. If you set device_handler as NULL in
device_id table standard SFI device handler will be used.
If its not NULL custom handler will be called.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/platform/intel-mid/intel-mid.c | 74 ++++++++++++++++++---------------
1 file changed, 40 insertions(+), 34 deletions(-)
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index f9c4be8..7bfd784 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -396,6 +396,9 @@ struct devs_id {
u8 type;
u8 delay;
void *(*get_platform_data)(void *info);
+ /* Custom handler for devices */
+ void (*device_handler)(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev);
};
/* the offset for the mapping of global gpio pin to irq */
@@ -690,28 +693,27 @@ static void *tc35876x_platform_data(void *data)
}
static const struct devs_id __initconst device_ids[] = {
- {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
- {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
- {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
- {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
- {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
- {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
- {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
- {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
- {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
- {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
- {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
- {"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data},
+ {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data, NULL},
+ {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data, NULL},
+ {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, NULL},
+ {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data, NULL},
+ {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
+ {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
+ {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data, NULL},
+ {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data, NULL},
+ {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data, NULL},
+ {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, NULL},
+ {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data, NULL},
+ {"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data, NULL},
/* MSIC subdevices */
- {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
- {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
- {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
- {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
- {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
- {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
-
- {},
+ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, NULL},
+ {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, NULL},
+ {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, NULL},
+ {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, NULL},
+ {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, NULL},
+ {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, NULL},
+ { 0 }
};
#define MAX_IPCDEVS 24
@@ -965,20 +967,24 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
if ((dev == NULL) || (dev->get_platform_data == NULL))
continue;
- switch (pentry->type) {
- case SFI_DEV_TYPE_IPC:
- sfi_handle_ipc_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SPI:
- sfi_handle_spi_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_I2C:
- sfi_handle_i2c_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_UART:
- case SFI_DEV_TYPE_HSI:
- default:
- break;
+ if (dev->device_handler) {
+ dev->device_handler(pentry, dev);
+ } else {
+ switch (pentry->type) {
+ case SFI_DEV_TYPE_IPC:
+ sfi_handle_ipc_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_SPI:
+ sfi_handle_spi_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_I2C:
+ sfi_handle_i2c_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_UART:
+ case SFI_DEV_TYPE_HSI:
+ default:
+ break;
+ }
}
}
return 0;
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 08/12] intel_mid: Added custom handler for ipc devices
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (6 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 07/12] intel_mid: Added custom device_handler support David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 09/12] intel_mid: Moved SFI related code to sfi.c David Cohen
` (3 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Added a custom handler for medfield based ipc devices and
moved devs_id structure defintion to header file.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/include/asm/intel-mid.h | 15 ++++++
arch/x86/platform/intel-mid/intel-mid.c | 82 ++++++++++++++++++++-------------
2 files changed, 66 insertions(+), 31 deletions(-)
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index beb7a5f..ad236ae 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -19,6 +19,21 @@ extern int sfi_mrtc_num;
extern struct sfi_rtc_table_entry sfi_mrtc_array[];
/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+ char name[SFI_NAME_LEN + 1];
+ u8 type;
+ u8 delay;
+ void *(*get_platform_data)(void *info);
+ /* Custom handler for devices */
+ void (*device_handler)(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev);
+};
+
+/*
* Medfield is the follow-up of Moorestown, it combines two chip solution into
* one. Other than that it also added always-on and constant tsc and lapic
* timers. Medfield is the platform name, and the chip name is called Penwell
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 7bfd784..40a3ff8 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -78,6 +78,8 @@ int sfi_mtimer_num;
struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
EXPORT_SYMBOL_GPL(sfi_mrtc_array);
int sfi_mrtc_num;
+static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev);
static void intel_mid_power_off(void)
{
@@ -386,21 +388,6 @@ static int get_gpio_by_name(const char *name)
return -1;
}
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
- char name[SFI_NAME_LEN + 1];
- u8 type;
- u8 delay;
- void *(*get_platform_data)(void *info);
- /* Custom handler for devices */
- void (*device_handler)(struct sfi_device_table_entry *pentry,
- struct devs_id *dev);
-};
-
/* the offset for the mapping of global gpio pin to irq */
#define INTEL_MID_IRQ_OFFSET 0x100
@@ -695,24 +682,24 @@ static void *tc35876x_platform_data(void *data)
static const struct devs_id __initconst device_ids[] = {
{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data, NULL},
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data, NULL},
- {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, NULL},
+ {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, &ipc_device_handler},
{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data, NULL},
{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data, NULL},
{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data, NULL},
{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data, NULL},
- {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, NULL},
+ {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, &ipc_device_handler},
{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data, NULL},
{"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data, NULL},
/* MSIC subdevices */
- {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, NULL},
- {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, NULL},
- {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, NULL},
- {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, NULL},
- {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, NULL},
- {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, NULL},
+ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, &ipc_device_handler},
+ {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, &ipc_device_handler},
+ {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, &ipc_device_handler},
+ {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, &ipc_device_handler},
+ {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, &ipc_device_handler},
+ {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, &ipc_device_handler},
{ 0 }
};
@@ -843,13 +830,6 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
pentry->name, pentry->irq);
pdata = dev->get_platform_data(pentry);
- /*
- * On Medfield the platform device creation is handled by the MSIC
- * MFD driver so we don't need to do it here.
- */
- if (intel_mid_has_msic())
- return;
-
pdev = platform_device_alloc(pentry->name, 0);
if (pdev == NULL) {
pr_err("out of memory for SFI platform device '%s'.\n",
@@ -859,7 +839,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
install_irq_resource(pdev, pentry->irq);
pdev->dev.platform_data = pdata;
- intel_scu_device_register(pdev);
+ platform_device_add(pdev);
}
static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
@@ -914,6 +894,46 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
i2c_register_board_info(pentry->host_num, &i2c_info, 1);
}
+static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct platform_device *pdev;
+ void *pdata = NULL;
+ static struct resource res __initdata = {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ };
+
+ pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+ pentry->name, pentry->irq);
+
+ /*
+ * We need to call platform init of IPC devices to fill misc_pdata
+ * structure. It will be used in msic_init for initialization.
+ */
+ if (dev != NULL)
+ pdata = dev->get_platform_data(pentry);
+
+ /*
+ * On Medfield the platform device creation is handled by the MSIC
+ * MFD driver so we don't need to do it here.
+ */
+ if (intel_mid_has_msic())
+ return;
+
+ pdev = platform_device_alloc(pentry->name, 0);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ pentry->name);
+ return;
+ }
+ res.start = pentry->irq;
+ platform_device_add_resources(pdev, &res, 1);
+
+ pdev->dev.platform_data = pdata;
+ intel_scu_device_register(pdev);
+}
+
static struct devs_id __init *get_device_id(u8 type, char *name)
{
struct devs_id *dev = device_ids;
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 09/12] intel_mid: Moved SFI related code to sfi.c
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (7 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 08/12] intel_mid: Added custom handler for ipc devices David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 10/12] intel-mid: sfi: allow struct devs_id.get_platform_data to be NULL David Cohen
` (2 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, Kuppuswamy Sathyanarayanan, David Cohen
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Moved SFI specific parsing/handling code to sfi.c. This will enable us
to reuse our intel-mid code for platforms that supports firmware
interfaces other than SFI (like ACPI).
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/include/asm/intel-mid.h | 1 +
arch/x86/platform/intel-mid/Makefile | 2 +
arch/x86/platform/intel-mid/intel-mid.c | 451 +----------------------------
arch/x86/platform/intel-mid/sfi.c | 485 ++++++++++++++++++++++++++++++++
4 files changed, 489 insertions(+), 450 deletions(-)
create mode 100644 arch/x86/platform/intel-mid/sfi.c
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index ad236ae..3b0e7a7 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -15,6 +15,7 @@
extern int intel_mid_pci_init(void);
extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
extern int sfi_mrtc_num;
extern struct sfi_rtc_table_entry sfi_mrtc_array[];
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index de29635..b11e5b2 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,3 +1,5 @@
obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o
obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o
obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
+# SFI specific code
+obj-$(CONFIG_SFI) += sfi.o
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 40a3ff8..4091569 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -18,19 +18,9 @@
#include <linux/interrupt.h>
#include <linux/scatterlist.h>
#include <linux/sfi.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/notifier.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/gpio.h>
-#include <linux/i2c/tc35876x.h>
#include <asm/setup.h>
#include <asm/mpspec_def.h>
@@ -68,19 +58,11 @@
enum intel_mid_timer_options intel_mid_timer_options;
-static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
-static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
enum intel_mid_cpu_type __intel_mid_cpu_chip;
EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
-int sfi_mtimer_num;
-
-struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
-EXPORT_SYMBOL_GPL(sfi_mrtc_array);
-int sfi_mrtc_num;
static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
struct devs_id *dev);
-
static void intel_mid_power_off(void)
{
}
@@ -90,114 +72,6 @@ static void intel_mid_reboot(void)
intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
}
-/* parse all the mtimer info to a static mtimer array */
-static int __init sfi_parse_mtmr(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_timer_table_entry *pentry;
- struct mpc_intsrc mp_irq;
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mtimer_num) {
- sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_timer_table_entry);
- pentry = (struct sfi_timer_table_entry *) sb->pentry;
- totallen = sfi_mtimer_num * sizeof(*pentry);
- memcpy(sfi_mtimer_array, pentry, totallen);
- }
-
- pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
- pentry = sfi_mtimer_array;
- for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
- pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
- " irq = %d\n", totallen, (u32)pentry->phys_addr,
- pentry->freq_hz, pentry->irq);
- if (!pentry->irq)
- continue;
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
-/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
- mp_irq.irqflag = 5;
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- }
-
- return 0;
-}
-
-struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
-{
- int i;
- if (hint < sfi_mtimer_num) {
- if (!sfi_mtimer_usage[hint]) {
- pr_debug("hint taken for timer %d irq %d\n",
- hint, sfi_mtimer_array[hint].irq);
- sfi_mtimer_usage[hint] = 1;
- return &sfi_mtimer_array[hint];
- }
- }
- /* take the first timer available */
- for (i = 0; i < sfi_mtimer_num;) {
- if (!sfi_mtimer_usage[i]) {
- sfi_mtimer_usage[i] = 1;
- return &sfi_mtimer_array[i];
- }
- i++;
- }
- return NULL;
-}
-
-void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
-{
- int i;
- for (i = 0; i < sfi_mtimer_num;) {
- if (mtmr->irq == sfi_mtimer_array[i].irq) {
- sfi_mtimer_usage[i] = 0;
- return;
- }
- i++;
- }
-}
-
-/* parse all the mrtc info to a global mrtc array */
-int __init sfi_parse_mrtc(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_rtc_table_entry *pentry;
- struct mpc_intsrc mp_irq;
-
- int totallen;
-
- sb = (struct sfi_table_simple *)table;
- if (!sfi_mrtc_num) {
- sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
- struct sfi_rtc_table_entry);
- pentry = (struct sfi_rtc_table_entry *)sb->pentry;
- totallen = sfi_mrtc_num * sizeof(*pentry);
- memcpy(sfi_mrtc_array, pentry, totallen);
- }
-
- pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
- pentry = sfi_mrtc_array;
- for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
- pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
- totallen, (u32)pentry->phys_addr, pentry->irq);
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = 0xf; /* level trigger and active low */
- mp_irq.srcbus = MP_BUS_ISA;
- mp_irq.srcbusirq = pentry->irq; /* IRQ */
- mp_irq.dstapic = MP_APIC_ALL;
- mp_irq.dstirq = pentry->irq;
- mp_save_irq(&mp_irq);
- }
- return 0;
-}
-
static unsigned long __init intel_mid_calibrate_tsc(void)
{
unsigned long fast_calibrate;
@@ -339,55 +213,6 @@ static inline int __init setup_x86_intel_mid_timer(char *arg)
}
__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static struct sfi_gpio_table_entry *gpio_table;
-static int gpio_num_entry;
-
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_gpio_table_entry *pentry;
- int num, i;
-
- if (gpio_table)
- return 0;
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
- pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
- gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
- if (!gpio_table)
- return -1;
- memcpy(gpio_table, pentry, num * sizeof(*pentry));
- gpio_num_entry = num;
-
- pr_debug("GPIO pin info:\n");
- for (i = 0; i < num; i++, pentry++)
- pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
- " pin = %d\n", i,
- pentry->controller_name,
- pentry->pin_name,
- pentry->pin_no);
- return 0;
-}
-
-static int get_gpio_by_name(const char *name)
-{
- struct sfi_gpio_table_entry *pentry = gpio_table;
- int i;
-
- if (!pentry)
- return -1;
- for (i = 0; i < gpio_num_entry; i++, pentry++) {
- if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
- return pentry->pin_no;
- }
- return -1;
-}
-
/* the offset for the mapping of global gpio pin to irq */
#define INTEL_MID_IRQ_OFFSET 0x100
@@ -703,197 +528,6 @@ static const struct devs_id __initconst device_ids[] = {
{ 0 }
};
-#define MAX_IPCDEVS 24
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static int ipc_next_dev;
-
-#define MAX_SCU_SPI 24
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static int spi_next_dev;
-
-#define MAX_SCU_I2C 24
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static int i2c_bus[MAX_SCU_I2C];
-static int i2c_next_dev;
-
-static void __init intel_scu_device_register(struct platform_device *pdev)
-{
- if (ipc_next_dev == MAX_IPCDEVS)
- pr_err("too many SCU IPC devices");
- else
- ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
- struct spi_board_info *new_dev;
-
- if (spi_next_dev == MAX_SCU_SPI) {
- pr_err("too many SCU SPI devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed spi dev %s\n",
- sdev->modalias);
- return;
- }
- memcpy(new_dev, sdev, sizeof(*sdev));
-
- spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
- struct i2c_board_info *idev)
-{
- struct i2c_board_info *new_dev;
-
- if (i2c_next_dev == MAX_SCU_I2C) {
- pr_err("too many SCU I2C devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed i2c dev %s\n",
- idev->type);
- return;
- }
- memcpy(new_dev, idev, sizeof(*idev));
-
- i2c_bus[i2c_next_dev] = bus;
- i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
- int i;
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_add(ipc_devs[i]);
-
- for (i = 0; i < spi_next_dev; i++)
- spi_register_board_info(spi_devs[i], 1);
-
- for (i = 0; i < i2c_next_dev; i++) {
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- adapter = i2c_get_adapter(i2c_bus[i]);
- if (adapter) {
- client = i2c_new_device(adapter, i2c_devs[i]);
- if (!client)
- pr_err("can't create i2c device %s\n",
- i2c_devs[i]->type);
- } else
- i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
- }
- intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
- int i;
-
- intel_scu_notifier_post(SCU_DOWN, NULL);
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
- /* Single threaded */
- static struct resource __initdata res = {
- .name = "IRQ",
- .flags = IORESOURCE_IRQ,
- };
- res.start = irq;
- platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct platform_device *pdev;
- void *pdata = NULL;
-
- pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
- pentry->name, pentry->irq);
- pdata = dev->get_platform_data(pentry);
-
- pdev = platform_device_alloc(pentry->name, 0);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- return;
- }
- install_irq_resource(pdev, pentry->irq);
-
- pdev->dev.platform_data = pdata;
- platform_device_add(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct spi_board_info spi_info;
- void *pdata = NULL;
-
- memset(&spi_info, 0, sizeof(spi_info));
- strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- spi_info.bus_num = pentry->host_num;
- spi_info.chip_select = pentry->addr;
- spi_info.max_speed_hz = pentry->max_freq;
- pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
- spi_info.bus_num,
- spi_info.modalias,
- spi_info.irq,
- spi_info.max_speed_hz,
- spi_info.chip_select);
-
- pdata = dev->get_platform_data(&spi_info);
-
- spi_info.platform_data = pdata;
- if (dev->delay)
- intel_scu_spi_device_register(&spi_info);
- else
- spi_register_board_info(&spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct i2c_board_info i2c_info;
- void *pdata = NULL;
-
- memset(&i2c_info, 0, sizeof(i2c_info));
- strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- i2c_info.addr = pentry->addr;
- pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
- pentry->host_num,
- i2c_info.type,
- i2c_info.irq,
- i2c_info.addr);
- pdata = dev->get_platform_data(&i2c_info);
- i2c_info.platform_data = pdata;
-
- if (dev->delay)
- intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
- else
- i2c_register_board_info(pentry->host_num, &i2c_info, 1);
-}
-
static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
struct devs_id *dev)
{
@@ -934,89 +568,6 @@ static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
intel_scu_device_register(pdev);
}
-static struct devs_id __init *get_device_id(u8 type, char *name)
-{
- struct devs_id *dev = device_ids;
-
- if (device_ids == NULL)
- return NULL;
-
- while (dev->name[0]) {
- if (dev->type == type &&
- !strncmp(dev->name, name, SFI_NAME_LEN)) {
- return dev;
- }
- dev++;
- }
-
- return NULL;
-}
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_device_table_entry *pentry;
- struct devs_id *dev = NULL;
- int num, i;
- int ioapic;
- struct io_apic_irq_attr irq_attr;
-
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
- pentry = (struct sfi_device_table_entry *)sb->pentry;
-
- for (i = 0; i < num; i++, pentry++) {
- int irq = pentry->irq;
-
- if (irq != (u8)0xff) { /* native RTE case */
- /* these SPI2 devices are not exposed to system as PCI
- * devices, but they have separate RTE entry in IOAPIC
- * so we have to enable them one by one here
- */
- ioapic = mp_find_ioapic(irq);
- irq_attr.ioapic = ioapic;
- irq_attr.ioapic_pin = irq;
- irq_attr.trigger = 1;
- irq_attr.polarity = 1;
- io_apic_set_pci_routing(NULL, irq, &irq_attr);
- } else
- irq = 0; /* No irq */
-
- dev = get_device_id(pentry->type, pentry->name);
-
- if ((dev == NULL) || (dev->get_platform_data == NULL))
- continue;
-
- if (dev->device_handler) {
- dev->device_handler(pentry, dev);
- } else {
- switch (pentry->type) {
- case SFI_DEV_TYPE_IPC:
- sfi_handle_ipc_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SPI:
- sfi_handle_spi_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_I2C:
- sfi_handle_i2c_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_UART:
- case SFI_DEV_TYPE_HSI:
- default:
- break;
- }
- }
- }
- return 0;
-}
-
-static int __init intel_mid_platform_init(void)
-{
- sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
- sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
- return 0;
-}
-arch_initcall(intel_mid_platform_init);
/*
* we will search these buttons in SFI GPIO table (by name)
@@ -1078,4 +629,4 @@ static int __init pb_keys_init(void)
}
return 0;
}
-late_initcall(pb_keys_init);
+late_initcall(pb_keys_init);
\ No newline at end of file
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
new file mode 100644
index 0000000..2f8196d
--- /dev/null
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -0,0 +1,485 @@
+/*
+ * intel_mid_sfi.c: Intel MID SFI initialization code
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/blkdev.h>
+
+#include <asm/setup.h>
+#include <asm/mpspec_def.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/intel-mid.h>
+#include <asm/intel_mid_vrtc.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/apb_timer.h>
+#include <asm/reboot.h>
+#include "intel_mid_weak_decls.h"
+
+#define SFI_SIG_OEM0 "OEM0"
+#define MAX_IPCDEVS 24
+#define MAX_SCU_SPI 24
+#define MAX_SCU_I2C 24
+
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static struct sfi_gpio_table_entry *gpio_table;
+static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+static int ipc_next_dev;
+static int spi_next_dev;
+static int i2c_next_dev;
+static int i2c_bus[MAX_SCU_I2C];
+static int gpio_num_entry;
+static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
+int sfi_mrtc_num;
+int sfi_mtimer_num;
+
+struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
+EXPORT_SYMBOL_GPL(sfi_mrtc_array);
+
+struct blocking_notifier_head intel_scu_notifier =
+ BLOCKING_NOTIFIER_INIT(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
+/* parse all the mtimer info to a static mtimer array */
+int __init sfi_parse_mtmr(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_timer_table_entry *pentry;
+ struct mpc_intsrc mp_irq;
+ int totallen;
+
+ sb = (struct sfi_table_simple *)table;
+ if (!sfi_mtimer_num) {
+ sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
+ struct sfi_timer_table_entry);
+ pentry = (struct sfi_timer_table_entry *) sb->pentry;
+ totallen = sfi_mtimer_num * sizeof(*pentry);
+ memcpy(sfi_mtimer_array, pentry, totallen);
+ }
+
+ pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
+ pentry = sfi_mtimer_array;
+ for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
+ pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n",
+ totallen, (u32)pentry->phys_addr,
+ pentry->freq_hz, pentry->irq);
+ if (!pentry->irq)
+ continue;
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+ mp_irq.irqflag = 5;
+ mp_irq.srcbus = MP_BUS_ISA;
+ mp_irq.srcbusirq = pentry->irq; /* IRQ */
+ mp_irq.dstapic = MP_APIC_ALL;
+ mp_irq.dstirq = pentry->irq;
+ mp_save_irq(&mp_irq);
+ }
+
+ return 0;
+}
+
+struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
+{
+ int i;
+ if (hint < sfi_mtimer_num) {
+ if (!sfi_mtimer_usage[hint]) {
+ pr_debug("hint taken for timer %d irq %d\n",
+ hint, sfi_mtimer_array[hint].irq);
+ sfi_mtimer_usage[hint] = 1;
+ return &sfi_mtimer_array[hint];
+ }
+ }
+ /* take the first timer available */
+ for (i = 0; i < sfi_mtimer_num;) {
+ if (!sfi_mtimer_usage[i]) {
+ sfi_mtimer_usage[i] = 1;
+ return &sfi_mtimer_array[i];
+ }
+ i++;
+ }
+ return NULL;
+}
+
+void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
+{
+ int i;
+ for (i = 0; i < sfi_mtimer_num;) {
+ if (mtmr->irq == sfi_mtimer_array[i].irq) {
+ sfi_mtimer_usage[i] = 0;
+ return;
+ }
+ i++;
+ }
+}
+
+/* parse all the mrtc info to a global mrtc array */
+int __init sfi_parse_mrtc(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_rtc_table_entry *pentry;
+ struct mpc_intsrc mp_irq;
+
+ int totallen;
+
+ sb = (struct sfi_table_simple *)table;
+ if (!sfi_mrtc_num) {
+ sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
+ struct sfi_rtc_table_entry);
+ pentry = (struct sfi_rtc_table_entry *)sb->pentry;
+ totallen = sfi_mrtc_num * sizeof(*pentry);
+ memcpy(sfi_mrtc_array, pentry, totallen);
+ }
+
+ pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
+ pentry = sfi_mrtc_array;
+ for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
+ pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
+ totallen, (u32)pentry->phys_addr, pentry->irq);
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = 0xf; /* level trigger and active low */
+ mp_irq.srcbus = MP_BUS_ISA;
+ mp_irq.srcbusirq = pentry->irq; /* IRQ */
+ mp_irq.dstapic = MP_APIC_ALL;
+ mp_irq.dstirq = pentry->irq;
+ mp_save_irq(&mp_irq);
+ }
+ return 0;
+}
+
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_gpio_table_entry *pentry;
+ int num, i;
+
+ if (gpio_table)
+ return 0;
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+ pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+ gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+ if (!gpio_table)
+ return -1;
+ memcpy(gpio_table, pentry, num * sizeof(*pentry));
+ gpio_num_entry = num;
+
+ pr_debug("GPIO pin info:\n");
+ for (i = 0; i < num; i++, pentry++)
+ pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+ " pin = %d\n", i,
+ pentry->controller_name,
+ pentry->pin_name,
+ pentry->pin_no);
+ return 0;
+}
+
+int get_gpio_by_name(const char *name)
+{
+ struct sfi_gpio_table_entry *pentry = gpio_table;
+ int i;
+
+ if (!pentry)
+ return -1;
+ for (i = 0; i < gpio_num_entry; i++, pentry++) {
+ if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+ return pentry->pin_no;
+ }
+ return -1;
+}
+
+void __init intel_scu_device_register(struct platform_device *pdev)
+{
+ if (ipc_next_dev == MAX_IPCDEVS)
+ pr_err("too many SCU IPC devices");
+ else
+ ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+ struct spi_board_info *new_dev;
+
+ if (spi_next_dev == MAX_SCU_SPI) {
+ pr_err("too many SCU SPI devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed spi dev %s\n",
+ sdev->modalias);
+ return;
+ }
+ memcpy(new_dev, sdev, sizeof(*sdev));
+
+ spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+ struct i2c_board_info *idev)
+{
+ struct i2c_board_info *new_dev;
+
+ if (i2c_next_dev == MAX_SCU_I2C) {
+ pr_err("too many SCU I2C devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed i2c dev %s\n",
+ idev->type);
+ return;
+ }
+ memcpy(new_dev, idev, sizeof(*idev));
+
+ i2c_bus[i2c_next_dev] = bus;
+ i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+ int i;
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_add(ipc_devs[i]);
+
+ for (i = 0; i < spi_next_dev; i++)
+ spi_register_board_info(spi_devs[i], 1);
+
+ for (i = 0; i < i2c_next_dev; i++) {
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ adapter = i2c_get_adapter(i2c_bus[i]);
+ if (adapter) {
+ client = i2c_new_device(adapter, i2c_devs[i]);
+ if (!client)
+ pr_err("can't create i2c device %s\n",
+ i2c_devs[i]->type);
+ } else
+ i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+ }
+ intel_scu_notifier_post(SCU_AVAILABLE, NULL);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+ int i;
+
+ intel_scu_notifier_post(SCU_DOWN, NULL);
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+ /* Single threaded */
+ static struct resource res __initdata = {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ };
+ res.start = irq;
+ platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct platform_device *pdev;
+ void *pdata = NULL;
+
+ pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+ pentry->name, pentry->irq);
+ pdata = dev->get_platform_data(pentry);
+
+ pdev = platform_device_alloc(pentry->name, 0);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ pentry->name);
+ return;
+ }
+ install_irq_resource(pdev, pentry->irq);
+
+ pdev->dev.platform_data = pdata;
+ platform_device_add(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct spi_board_info spi_info;
+ void *pdata = NULL;
+
+ memset(&spi_info, 0, sizeof(spi_info));
+ strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+ spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+ spi_info.bus_num = pentry->host_num;
+ spi_info.chip_select = pentry->addr;
+ spi_info.max_speed_hz = pentry->max_freq;
+ pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
+ spi_info.bus_num,
+ spi_info.modalias,
+ spi_info.irq,
+ spi_info.max_speed_hz,
+ spi_info.chip_select);
+
+ pdata = dev->get_platform_data(&spi_info);
+
+ spi_info.platform_data = pdata;
+ if (dev->delay)
+ intel_scu_spi_device_register(&spi_info);
+ else
+ spi_register_board_info(&spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct i2c_board_info i2c_info;
+ void *pdata = NULL;
+
+ memset(&i2c_info, 0, sizeof(i2c_info));
+ strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+ i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
+ i2c_info.addr = pentry->addr;
+ pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
+ pentry->host_num,
+ i2c_info.type,
+ i2c_info.irq,
+ i2c_info.addr);
+ pdata = dev->get_platform_data(&i2c_info);
+ i2c_info.platform_data = pdata;
+
+ if (dev->delay)
+ intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
+ else
+ i2c_register_board_info(pentry->host_num, &i2c_info, 1);
+}
+
+static struct devs_id __init *get_device_id(u8 type, char *name)
+{
+ struct devs_id *dev = device_ids;
+
+ if (device_ids == NULL)
+ return NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == type &&
+ !strncmp(dev->name, name, SFI_NAME_LEN)) {
+ return dev;
+ }
+ dev++;
+ }
+
+ return NULL;
+}
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_device_table_entry *pentry;
+ struct devs_id *dev = NULL;
+ int num, i;
+ int ioapic;
+ struct io_apic_irq_attr irq_attr;
+
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+ pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+ for (i = 0; i < num; i++, pentry++) {
+ int irq = pentry->irq;
+
+ if (irq != (u8)0xff) { /* native RTE case */
+ /* these SPI2 devices are not exposed to system as PCI
+ * devices, but they have separate RTE entry in IOAPIC
+ * so we have to enable them one by one here
+ */
+ ioapic = mp_find_ioapic(irq);
+ irq_attr.ioapic = ioapic;
+ irq_attr.ioapic_pin = irq;
+ irq_attr.trigger = 1;
+ irq_attr.polarity = 1;
+ io_apic_set_pci_routing(NULL, irq, &irq_attr);
+ } else
+ irq = 0; /* No irq */
+
+ dev = get_device_id(pentry->type, pentry->name);
+
+ if ((dev == NULL) || (dev->get_platform_data == NULL))
+ continue;
+
+ if (dev->device_handler) {
+ dev->device_handler(pentry, dev);
+ } else {
+ switch (pentry->type) {
+ case SFI_DEV_TYPE_IPC:
+ sfi_handle_ipc_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_SPI:
+ sfi_handle_spi_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_I2C:
+ sfi_handle_i2c_dev(pentry, dev);
+ break;
+ case SFI_DEV_TYPE_UART:
+ case SFI_DEV_TYPE_HSI:
+ default:
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+static int __init intel_mid_platform_init(void)
+{
+ sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+ sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+ return 0;
+}
+arch_initcall(intel_mid_platform_init);
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 10/12] intel-mid: sfi: allow struct devs_id.get_platform_data to be NULL
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (8 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 09/12] intel_mid: Moved SFI related code to sfi.c David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 11/12] x86: intel-mid: add section for sfi device table David Cohen
2013-10-15 23:42 ` [PATCH v4 12/12] intel_mid: Moved board related code to a new file David Cohen
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86; +Cc: linux-kernel, David Cohen
Intel mid sfi code doesn't need struct devs_id.get_platform_data != NULL.
If the callback is not set, just assume there is no platform_data.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/platform/intel-mid/sfi.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index 2f8196d..3f1c171 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -70,6 +70,9 @@ struct blocking_notifier_head intel_scu_notifier =
BLOCKING_NOTIFIER_INIT(intel_scu_notifier);
EXPORT_SYMBOL_GPL(intel_scu_notifier);
+#define intel_mid_sfi_get_pdata(dev, priv) \
+ ((dev)->get_platform_data ? (dev)->get_platform_data(priv) : NULL)
+
/* parse all the mtimer info to a static mtimer array */
int __init sfi_parse_mtmr(struct sfi_table_header *table)
{
@@ -334,7 +337,7 @@ static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
pentry->name, pentry->irq);
- pdata = dev->get_platform_data(pentry);
+ pdata = intel_mid_sfi_get_pdata(dev, pentry);
pdev = platform_device_alloc(pentry->name, 0);
if (pdev == NULL) {
@@ -367,7 +370,7 @@ static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
spi_info.max_speed_hz,
spi_info.chip_select);
- pdata = dev->get_platform_data(&spi_info);
+ pdata = intel_mid_sfi_get_pdata(dev, &spi_info);
spi_info.platform_data = pdata;
if (dev->delay)
@@ -391,7 +394,7 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
i2c_info.type,
i2c_info.irq,
i2c_info.addr);
- pdata = dev->get_platform_data(&i2c_info);
+ pdata = intel_mid_sfi_get_pdata(dev, &i2c_info);
i2c_info.platform_data = pdata;
if (dev->delay)
@@ -450,7 +453,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
dev = get_device_id(pentry->type, pentry->name);
- if ((dev == NULL) || (dev->get_platform_data == NULL))
+ if (!dev)
continue;
if (dev->device_handler) {
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 11/12] x86: intel-mid: add section for sfi device table
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (9 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 10/12] intel-mid: sfi: allow struct devs_id.get_platform_data to be NULL David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:42 ` [PATCH v4 12/12] intel_mid: Moved board related code to a new file David Cohen
11 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86; +Cc: linux-kernel, David Cohen
When Intel mid uses SFI table to enumerate devices, it requires an extra
device table with further information about how to probe such devices.
This patch creates a section where the device table will stay if
CONFIG_X86_INTEL_MID is selected.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/kernel/vmlinux.lds.S | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 10c4f30..da6b35a 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -199,6 +199,15 @@ SECTIONS
__x86_cpu_dev_end = .;
}
+#ifdef CONFIG_X86_INTEL_MID
+ .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
+ LOAD_OFFSET) {
+ __x86_intel_mid_dev_start = .;
+ *(.x86_intel_mid_dev.init)
+ __x86_intel_mid_dev_end = .;
+ }
+#endif
+
/*
* start address and size of operations which during runtime
* can be patched with virtualization friendly instructions or
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4 12/12] intel_mid: Moved board related code to a new file
2013-10-15 23:42 [PATCH v4 00/12] rework arch/x86/platform/[mrst => intel-mid] David Cohen
` (10 preceding siblings ...)
2013-10-15 23:42 ` [PATCH v4 11/12] x86: intel-mid: add section for sfi device table David Cohen
@ 2013-10-15 23:42 ` David Cohen
2013-10-15 23:44 ` H. Peter Anvin
11 siblings, 1 reply; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:42 UTC (permalink / raw)
To: hpa, mingo, tglx, x86
Cc: linux-kernel, David Cohen, Kuppuswamy Sathyanarayanan
As Intel rolling out more SoC's after Moorestown, we need to
re-structure the code in a way that is backward compatible and easy to
expand. This patch implements a flexible way to support multiple boards
and devices.
This patch does not add any new functional support. It just refactors
the existing code to increase the modularity and decrease the code
duplication for supporting multiple soc's and boards.
Currently intel-mid.c has both board and soc related code in one file.
This patch moves the board related code to new files in the following
order.
1. Moved the device specific code to arch/x86/platform/intel-mid/device-libs/
platform_<device>.*. A new device file is added for every supported
device. This code will get conditionally compiled by using
corresponding device driver CONFIG option.
2. Moved the device_ids location to .x86_intel_mid_dev.init section by
using new intel_mid_sfi_dev() macro.
This patch was based on previous code from Sathyanarayanan Kuppuswamy.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
---
arch/x86/include/asm/intel-mid.h | 16 +
arch/x86/platform/intel-mid/Makefile | 3 +
arch/x86/platform/intel-mid/device_libs/Makefile | 22 ++
.../intel-mid/device_libs/platform_emc1403.c | 41 ++
.../intel-mid/device_libs/platform_gpio_keys.c | 83 ++++
.../platform/intel-mid/device_libs/platform_ipc.c | 68 ++++
.../platform/intel-mid/device_libs/platform_ipc.h | 17 +
.../intel-mid/device_libs/platform_lis331.c | 39 ++
.../intel-mid/device_libs/platform_max3111.c | 35 ++
.../intel-mid/device_libs/platform_max7315.c | 79 ++++
.../intel-mid/device_libs/platform_mpu3050.c | 36 ++
.../platform/intel-mid/device_libs/platform_msic.c | 87 +++++
.../platform/intel-mid/device_libs/platform_msic.h | 19 +
.../intel-mid/device_libs/platform_msic_audio.c | 47 +++
.../intel-mid/device_libs/platform_msic_battery.c | 37 ++
.../intel-mid/device_libs/platform_msic_gpio.c | 48 +++
.../intel-mid/device_libs/platform_msic_ocd.c | 49 +++
.../device_libs/platform_msic_power_btn.c | 36 ++
.../intel-mid/device_libs/platform_msic_thermal.c | 37 ++
.../intel-mid/device_libs/platform_pmic_gpio.c | 54 +++
.../intel-mid/device_libs/platform_tc35876x.c | 36 ++
.../intel-mid/device_libs/platform_tca6416.c | 57 +++
arch/x86/platform/intel-mid/intel-mid.c | 419 ---------------------
arch/x86/platform/intel-mid/sfi.c | 13 +-
24 files changed, 952 insertions(+), 426 deletions(-)
create mode 100644 arch/x86/platform/intel-mid/device_libs/Makefile
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_ipc.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_ipc.h
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_lis331.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_max3111.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_max7315.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic.h
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index 3b0e7a7..3eeed61 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -12,8 +12,11 @@
#define _ASM_X86_INTEL_MID_H
#include <linux/sfi.h>
+#include <linux/platform_device.h>
extern int intel_mid_pci_init(void);
+extern int get_gpio_by_name(const char *name);
+extern void intel_scu_device_register(struct platform_device *pdev);
extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
extern int __init sfi_parse_mtmr(struct sfi_table_header *table);
extern int sfi_mrtc_num;
@@ -34,6 +37,10 @@ struct devs_id {
struct devs_id *dev);
};
+#define intel_mid_sfi_dev(i) \
+ static const struct devs_id *__intel_mid_sfi_##i##_dev __used \
+ __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
+
/*
* Medfield is the follow-up of Moorestown, it combines two chip solution into
* one. Other than that it also added always-on and constant tsc and lapic
@@ -55,9 +62,15 @@ static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void)
return __intel_mid_cpu_chip;
}
+static inline bool intel_mid_has_msic(void)
+{
+ return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL);
+}
+
#else /* !CONFIG_X86_INTEL_MID */
#define intel_mid_identify_cpu() (0)
+#define intel_mid_has_msic() (0)
#endif /* !CONFIG_X86_INTEL_MID */
@@ -94,4 +107,7 @@ extern void intel_scu_devices_destroy(void);
extern void intel_mid_rtc_init(void);
+/* the offset for the mapping of global gpio pin to irq */
+#define INTEL_MID_IRQ_OFFSET 0x100
+
#endif /* _ASM_X86_INTEL_MID_H */
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index b11e5b2..8bd9338 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -3,3 +3,6 @@ obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o
obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o
# SFI specific code
obj-$(CONFIG_SFI) += sfi.o
+
+# platform configuration for board devices
+obj-y += device_libs/
diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
new file mode 100644
index 0000000..097e7a7
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -0,0 +1,22 @@
+# IPC Devices
+obj-y += platform_ipc.o
+obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
+obj-$(subst m,y,$(CONFIG_SND_MFLD_MACHINE)) += platform_msic_audio.o
+obj-$(subst m,y,$(CONFIG_GPIO_MSIC)) += platform_msic_gpio.o
+obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_ocd.o
+obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o
+obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
+obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o
+obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
+# I2C Devices
+obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
+obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
+obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o
+obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
+obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
+obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
+obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
+# SPI Devices
+obj-$(subst m,y,$(CONFIG_SERIAL_MRST_MAX3110)) += platform_max3111.o
+# MISC Devices
+obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
new file mode 100644
index 0000000..ed3802d
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
@@ -0,0 +1,41 @@
+/*
+ * platform_emc1403.c: emc1403 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <asm/intel-mid.h>
+
+static void __init *emc1403_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("thermal_int");
+ int intr2nd = get_gpio_by_name("thermal_alert");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static const struct devs_id emc1403_dev_id __initconst = {
+ .name = "emc1403",
+ .type = SFI_DEV_TYPE_I2C,
+ .delay = 1,
+ .get_platform_data = &emc1403_platform_data,
+};
+
+intel_mid_sfi_dev(emc1403_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
new file mode 100644
index 0000000..a013a48
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
@@ -0,0 +1,83 @@
+/*
+ * platform_gpio_keys.c: gpio_keys platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/platform_device.h>
+#include <asm/intel-mid.h>
+
+#define DEVICE_NAME "gpio-keys"
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+ {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
+ {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
+ {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
+ {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
+ {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
+ {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
+ {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
+ {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
+};
+
+static struct gpio_keys_platform_data gpio_keys = {
+ .buttons = gpio_button,
+ .rep = 1,
+ .nbuttons = -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+ .name = DEVICE_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_keys,
+ },
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+ struct gpio_keys_button *gb = gpio_button;
+ int i, num, good = 0;
+
+ num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+ for (i = 0; i < num; i++) {
+ gb[i].gpio = get_gpio_by_name(gb[i].desc);
+ pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
+ gb[i].gpio);
+ if (gb[i].gpio == -1)
+ continue;
+
+ if (i != good)
+ gb[good] = gb[i];
+ good++;
+ }
+
+ if (good) {
+ gpio_keys.nbuttons = good;
+ return platform_device_register(&pb_device);
+ }
+ return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_ipc.c b/arch/x86/platform/intel-mid/device_libs/platform_ipc.c
new file mode 100644
index 0000000..9eb52c4
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_ipc.c
@@ -0,0 +1,68 @@
+/*
+ * platform_ipc.c: IPC platform library file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/sfi.h>
+#include <linux/gpio.h>
+#include <asm/intel-mid.h>
+#include "platform_ipc.h"
+
+void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev)
+{
+ struct platform_device *pdev;
+ void *pdata = NULL;
+ static struct resource res __initdata = {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ };
+
+ pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
+ pentry->name, pentry->irq);
+
+ /*
+ * We need to call platform init of IPC devices to fill misc_pdata
+ * structure. It will be used in msic_init for initialization.
+ */
+ if (dev != NULL)
+ pdata = dev->get_platform_data(pentry);
+
+ /*
+ * On Medfield the platform device creation is handled by the MSIC
+ * MFD driver so we don't need to do it here.
+ */
+ if (intel_mid_has_msic())
+ return;
+
+ pdev = platform_device_alloc(pentry->name, 0);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ pentry->name);
+ return;
+ }
+ res.start = pentry->irq;
+ platform_device_add_resources(pdev, &res, 1);
+
+ pdev->dev.platform_data = pdata;
+ intel_scu_device_register(pdev);
+}
+
+static const struct devs_id pmic_audio_dev_id __initconst = {
+ .name = "pmic_audio",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .device_handler = &ipc_device_handler,
+};
+
+intel_mid_sfi_dev(pmic_audio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_ipc.h b/arch/x86/platform/intel-mid/device_libs/platform_ipc.h
new file mode 100644
index 0000000..8f568dd
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_ipc.h
@@ -0,0 +1,17 @@
+/*
+ * platform_ipc.h: IPC platform library header file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _PLATFORM_IPC_H_
+#define _PLATFORM_IPC_H_
+
+extern void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
+ struct devs_id *dev) __attribute__((weak));
+#endif
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
new file mode 100644
index 0000000..839706f
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
@@ -0,0 +1,39 @@
+/*
+ * platform_lis331.c: lis331 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <asm/intel-mid.h>
+
+static void __init *lis331dl_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("accel_int");
+ int intr2nd = get_gpio_by_name("accel_2");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static const struct devs_id lis331dl_dev_id __initconst = {
+ .name = "i2c_accel",
+ .type = SFI_DEV_TYPE_I2C,
+ .get_platform_data = &lis331dl_platform_data,
+};
+
+intel_mid_sfi_dev(lis331dl_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max3111.c b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
new file mode 100644
index 0000000..2818aee
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_max3111.c
@@ -0,0 +1,35 @@
+/*
+ * platform_max3111.c: max3111 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <asm/intel-mid.h>
+
+static void __init *max3111_platform_data(void *info)
+{
+ struct spi_board_info *spi_info = info;
+ int intr = get_gpio_by_name("max3111_int");
+
+ spi_info->mode = SPI_MODE_0;
+ if (intr == -1)
+ return NULL;
+ spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ return NULL;
+}
+
+static const struct devs_id max3111_dev_id __initconst = {
+ .name = "spi_max3111",
+ .type = SFI_DEV_TYPE_SPI,
+ .get_platform_data = &max3111_platform_data,
+};
+
+intel_mid_sfi_dev(max3111_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
new file mode 100644
index 0000000..57e126f
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
@@ -0,0 +1,79 @@
+/*
+ * platform_max7315.c: max7315 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/pca953x.h>
+#include <asm/intel-mid.h>
+
+#define MAX7315_NUM 2
+
+static void __init *max7315_platform_data(void *info)
+{
+ static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+ static int nr;
+ struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+ struct i2c_board_info *i2c_info = info;
+ int gpio_base, intr;
+ char base_pin_name[SFI_NAME_LEN + 1];
+ char intr_pin_name[SFI_NAME_LEN + 1];
+
+ if (nr == MAX7315_NUM) {
+ pr_err("too many max7315s, we only support %d\n",
+ MAX7315_NUM);
+ return NULL;
+ }
+ /* we have several max7315 on the board, we only need load several
+ * instances of the same pca953x driver to cover them
+ */
+ strcpy(i2c_info->type, "max7315");
+ if (nr++) {
+ sprintf(base_pin_name, "max7315_%d_base", nr);
+ sprintf(intr_pin_name, "max7315_%d_int", nr);
+ } else {
+ strcpy(base_pin_name, "max7315_base");
+ strcpy(intr_pin_name, "max7315_int");
+ }
+
+ gpio_base = get_gpio_by_name(base_pin_name);
+ intr = get_gpio_by_name(intr_pin_name);
+
+ if (gpio_base == -1)
+ return NULL;
+ max7315->gpio_base = gpio_base;
+ if (intr != -1) {
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
+ } else {
+ i2c_info->irq = -1;
+ max7315->irq_base = -1;
+ }
+ return max7315;
+}
+
+static const struct devs_id max7315_dev_id __initconst = {
+ .name = "i2c_max7315",
+ .type = SFI_DEV_TYPE_I2C,
+ .delay = 1,
+ .get_platform_data = &max7315_platform_data,
+};
+
+static const struct devs_id max7315_2_dev_id __initconst = {
+ .name = "i2c_max7315_2",
+ .type = SFI_DEV_TYPE_I2C,
+ .delay = 1,
+ .get_platform_data = &max7315_platform_data,
+};
+
+intel_mid_sfi_dev(max7315_dev_id);
+intel_mid_sfi_dev(max7315_2_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
new file mode 100644
index 0000000..bc05120
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
@@ -0,0 +1,36 @@
+/*
+ * platform_mpu3050.c: mpu3050 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <asm/intel-mid.h>
+
+static void *mpu3050_platform_data(void *info)
+{
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("mpu3050_int");
+
+ if (intr == -1)
+ return NULL;
+
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ return NULL;
+}
+
+static const struct devs_id mpu3050_dev_id __initconst = {
+ .name = "mpu3050",
+ .type = SFI_DEV_TYPE_I2C,
+ .delay = 1,
+ .get_platform_data = &mpu3050_platform_data,
+};
+
+intel_mid_sfi_dev(mpu3050_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.c b/arch/x86/platform/intel-mid/device_libs/platform_msic.c
new file mode 100644
index 0000000..9f4a775
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic.c
@@ -0,0 +1,87 @@
+/*
+ * platform_msic.c: MSIC platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/intel-mid.h>
+#include "platform_msic.h"
+
+struct intel_msic_platform_data msic_pdata;
+
+static struct resource msic_resources[] = {
+ {
+ .start = INTEL_MSIC_IRQ_PHYS_BASE,
+ .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device msic_device = {
+ .name = "intel_msic",
+ .id = -1,
+ .dev = {
+ .platform_data = &msic_pdata,
+ },
+ .num_resources = ARRAY_SIZE(msic_resources),
+ .resource = msic_resources,
+};
+
+static int msic_scu_status_change(struct notifier_block *nb,
+ unsigned long code, void *data)
+{
+ if (code == SCU_DOWN) {
+ platform_device_unregister(&msic_device);
+ return 0;
+ }
+
+ return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+ static struct notifier_block msic_scu_notifier = {
+ .notifier_call = msic_scu_status_change,
+ };
+
+ /*
+ * We need to be sure that the SCU IPC is ready before MSIC device
+ * can be registered.
+ */
+ if (intel_mid_has_msic())
+ intel_scu_notifier_add(&msic_scu_notifier);
+
+ return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+ struct sfi_device_table_entry *entry = info;
+
+ BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+ msic_pdata.irq[block] = entry->irq;
+
+ return NULL;
+}
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.h b/arch/x86/platform/intel-mid/device_libs/platform_msic.h
new file mode 100644
index 0000000..917eb56
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic.h
@@ -0,0 +1,19 @@
+/*
+ * platform_msic.h: MSIC platform data header file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _PLATFORM_MSIC_H_
+#define _PLATFORM_MSIC_H_
+
+extern struct intel_msic_platform_data msic_pdata;
+
+extern void *msic_generic_platform_data(void *info,
+ enum intel_msic_block block) __attribute__((weak));
+#endif
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
new file mode 100644
index 0000000..ae42f31
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
@@ -0,0 +1,47 @@
+/*
+ * platform_msic_audio.c: MSIC audio platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void *msic_audio_platform_data(void *info)
+{
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+
+ if (IS_ERR(pdev)) {
+ pr_err("failed to create audio platform device\n");
+ return NULL;
+ }
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static const struct devs_id msic_audio_dev_id __initconst = {
+ .name = "msic_audio",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .get_platform_data = &msic_audio_platform_data,
+ .device_handler = &ipc_device_handler,
+};
+
+intel_mid_sfi_dev(msic_audio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
new file mode 100644
index 0000000..118819d
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
@@ -0,0 +1,37 @@
+/*
+ * platform_msic_battery.c: MSIC battery platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_battery_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static const struct devs_id msic_battery_dev_id __initconst = {
+ .name = "msic_battery",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .get_platform_data = &msic_battery_platform_data,
+ .device_handler = &ipc_device_handler,
+};
+
+intel_mid_sfi_dev(msic_battery_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
new file mode 100644
index 0000000..5d9c627
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
@@ -0,0 +1,48 @@
+/*
+ * platform_msic_gpio.c: MSIC GPIO platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_gpio_platform_data(void *info)
+{
+ static struct intel_msic_gpio_pdata msic_gpio_pdata;
+
+ int gpio = get_gpio_by_name("msic_gpio_base");
+
+ if (gpio < 0)
+ return NULL;
+
+ msic_gpio_pdata.gpio_base = gpio;
+ msic_pdata.gpio = &msic_gpio_pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static const struct devs_id msic_gpio_dev_id __initconst = {
+ .name = "msic_gpio",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .get_platform_data = &msic_gpio_platform_data,
+ .device_handler = &ipc_device_handler,
+};
+
+intel_mid_sfi_dev(msic_gpio_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
new file mode 100644
index 0000000..7978104
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
@@ -0,0 +1,49 @@
+/*
+ * platform_msic_ocd.c: MSIC OCD platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_ocd_platform_data(void *info)
+{
+ static struct intel_msic_ocd_pdata msic_ocd_pdata;
+ int gpio;
+
+ gpio = get_gpio_by_name("ocd_gpio");
+
+ if (gpio < 0)
+ return NULL;
+
+ msic_ocd_pdata.gpio = gpio;
+ msic_pdata.ocd = &msic_ocd_pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
+static const struct devs_id msic_ocd_dev_id __initconst = {
+ .name = "msic_ocd",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .get_platform_data = &msic_ocd_platform_data,
+ .device_handler = &ipc_device_handler,
+};
+
+intel_mid_sfi_dev(msic_ocd_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
new file mode 100644
index 0000000..76c55ab
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
@@ -0,0 +1,36 @@
+/*
+ * platform_msic_power_btn.c: MSIC power btn platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/sfi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_power_btn_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static const struct devs_id msic_power_btn_dev_id __initconst = {
+ .name = "msic_power_btn",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .get_platform_data = &msic_power_btn_platform_data,
+ .device_handler = &ipc_device_handler,
+};
+
+intel_mid_sfi_dev(msic_power_btn_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
new file mode 100644
index 0000000..b27594c
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
@@ -0,0 +1,37 @@
+/*
+ * platform_msic_thermal.c: msic_thermal platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_msic.h>
+#include <asm/intel-mid.h>
+
+#include "platform_msic.h"
+#include "platform_ipc.h"
+
+static void __init *msic_thermal_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
+}
+
+static const struct devs_id msic_thermal_dev_id __initconst = {
+ .name = "msic_thermal",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .get_platform_data = &msic_thermal_platform_data,
+ .device_handler = &ipc_device_handler,
+};
+
+intel_mid_sfi_dev(msic_thermal_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
new file mode 100644
index 0000000..f5bbf1f
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
@@ -0,0 +1,54 @@
+/*
+ * platform_pmic_gpio.c: PMIC GPIO platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <asm/intel-mid.h>
+
+#include "platform_ipc.h"
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+ static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+ int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+ if (gpio_base == -1)
+ gpio_base = 64;
+ pmic_gpio_pdata.gpio_base = gpio_base;
+ pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
+ pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+ return &pmic_gpio_pdata;
+}
+
+static const struct devs_id pmic_gpio_spi_dev_id __initconst = {
+ .name = "pmic_gpio",
+ .type = SFI_DEV_TYPE_SPI,
+ .delay = 1,
+ .get_platform_data = &pmic_gpio_platform_data,
+};
+
+static const struct devs_id pmic_gpio_ipc_dev_id __initconst = {
+ .name = "pmic_gpio",
+ .type = SFI_DEV_TYPE_IPC,
+ .delay = 1,
+ .get_platform_data = &pmic_gpio_platform_data,
+ .device_handler = &ipc_device_handler
+};
+
+intel_mid_sfi_dev(pmic_gpio_spi_dev_id);
+intel_mid_sfi_dev(pmic_gpio_ipc_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
new file mode 100644
index 0000000..42c278d
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
@@ -0,0 +1,36 @@
+/*
+ * platform_tc35876x.c: tc35876x platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c/tc35876x.h>
+#include <asm/intel-mid.h>
+
+/*tc35876x DSI_LVDS bridge chip and panel platform data*/
+static void *tc35876x_platform_data(void *data)
+{
+ static struct tc35876x_platform_data pdata;
+
+ /* gpio pins set to -1 will not be used by the driver */
+ pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
+ pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
+ pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
+
+ return &pdata;
+}
+
+static const struct devs_id tc35876x_dev_id __initconst = {
+ .name = "i2c_disp_brig",
+ .type = SFI_DEV_TYPE_I2C,
+ .get_platform_data = &tc35876x_platform_data,
+};
+
+intel_mid_sfi_dev(tc35876x_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
new file mode 100644
index 0000000..054d9f2
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
@@ -0,0 +1,57 @@
+/*
+ * platform_tca6416.c: tca6416 platform data initilization file
+ *
+ * (C) Copyright 2013 Intel Corporation
+ * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/platform_data/pca953x.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <asm/intel-mid.h>
+
+#define TCA6416_NAME "tca6416"
+#define TCA6416_BASE "tca6416_base"
+#define TCA6416_INTR "tca6416_int"
+
+static void *tca6416_platform_data(void *info)
+{
+ static struct pca953x_platform_data tca6416;
+ struct i2c_board_info *i2c_info = info;
+ int gpio_base, intr;
+ char base_pin_name[SFI_NAME_LEN + 1];
+ char intr_pin_name[SFI_NAME_LEN + 1];
+
+ strcpy(i2c_info->type, TCA6416_NAME);
+ strcpy(base_pin_name, TCA6416_BASE);
+ strcpy(intr_pin_name, TCA6416_INTR);
+
+ gpio_base = get_gpio_by_name(base_pin_name);
+ intr = get_gpio_by_name(intr_pin_name);
+
+ if (gpio_base == -1)
+ return NULL;
+ tca6416.gpio_base = gpio_base;
+ if (intr != -1) {
+ i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
+ tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
+ } else {
+ i2c_info->irq = -1;
+ tca6416.irq_base = -1;
+ }
+ return &tca6416;
+}
+
+static const struct devs_id tca6416_dev_id __initconst = {
+ .name = "tca6416",
+ .type = SFI_DEV_TYPE_I2C,
+ .delay = 1,
+ .get_platform_data = &tca6416_platform_data,
+};
+
+intel_mid_sfi_dev(tca6416_dev_id);
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 4091569..523a1c8 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -61,8 +61,6 @@ enum intel_mid_timer_options intel_mid_timer_options;
enum intel_mid_cpu_type __intel_mid_cpu_chip;
EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
-static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
- struct devs_id *dev);
static void intel_mid_power_off(void)
{
}
@@ -213,420 +211,3 @@ static inline int __init setup_x86_intel_mid_timer(char *arg)
}
__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
-/* the offset for the mapping of global gpio pin to irq */
-#define INTEL_MID_IRQ_OFFSET 0x100
-
-static void __init *pmic_gpio_platform_data(void *info)
-{
- static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
- int gpio_base = get_gpio_by_name("pmic_gpio_base");
-
- if (gpio_base == -1)
- gpio_base = 64;
- pmic_gpio_pdata.gpio_base = gpio_base;
- pmic_gpio_pdata.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- pmic_gpio_pdata.gpiointr = 0xffffeff8;
-
- return &pmic_gpio_pdata;
-}
-
-static void __init *max3111_platform_data(void *info)
-{
- struct spi_board_info *spi_info = info;
- int intr = get_gpio_by_name("max3111_int");
-
- spi_info->mode = SPI_MODE_0;
- if (intr == -1)
- return NULL;
- spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- return NULL;
-}
-
-/* we have multiple max7315 on the board ... */
-#define MAX7315_NUM 2
-static void __init *max7315_platform_data(void *info)
-{
- static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
- static int nr;
- struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- if (nr == MAX7315_NUM) {
- pr_err("too many max7315s, we only support %d\n",
- MAX7315_NUM);
- return NULL;
- }
- /* we have several max7315 on the board, we only need load several
- * instances of the same pca953x driver to cover them
- */
- strcpy(i2c_info->type, "max7315");
- if (nr++) {
- sprintf(base_pin_name, "max7315_%d_base", nr);
- sprintf(intr_pin_name, "max7315_%d_int", nr);
- } else {
- strcpy(base_pin_name, "max7315_base");
- strcpy(intr_pin_name, "max7315_int");
- }
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base == -1)
- return NULL;
- max7315->gpio_base = gpio_base;
- if (intr != -1) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- max7315->irq_base = -1;
- }
- return max7315;
-}
-
-static void *tca6416_platform_data(void *info)
-{
- static struct pca953x_platform_data tca6416;
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- strcpy(i2c_info->type, "tca6416");
- strcpy(base_pin_name, "tca6416_base");
- strcpy(intr_pin_name, "tca6416_int");
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base == -1)
- return NULL;
- tca6416.gpio_base = gpio_base;
- if (intr != -1) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- tca6416.irq_base = -1;
- }
- return &tca6416;
-}
-
-static void *mpu3050_platform_data(void *info)
-{
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("mpu3050_int");
-
- if (intr == -1)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- return NULL;
-}
-
-static void __init *emc1403_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("thermal_int");
- int intr2nd = get_gpio_by_name("thermal_alert");
-
- if (intr == -1 || intr2nd == -1)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static void __init *lis331dl_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("accel_int");
- int intr2nd = get_gpio_by_name("accel_2");
-
- if (intr == -1 || intr2nd == -1)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static void __init *no_platform_data(void *info)
-{
- return NULL;
-}
-
-static struct resource msic_resources[] = {
- {
- .start = INTEL_MSIC_IRQ_PHYS_BASE,
- .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct intel_msic_platform_data msic_pdata;
-
-static struct platform_device msic_device = {
- .name = "intel_msic",
- .id = -1,
- .dev = {
- .platform_data = &msic_pdata,
- },
- .num_resources = ARRAY_SIZE(msic_resources),
- .resource = msic_resources,
-};
-
-static inline bool intel_mid_has_msic(void)
-{
- return intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL;
-}
-
-static int msic_scu_status_change(struct notifier_block *nb,
- unsigned long code, void *data)
-{
- if (code == SCU_DOWN) {
- platform_device_unregister(&msic_device);
- return 0;
- }
-
- return platform_device_register(&msic_device);
-}
-
-static int __init msic_init(void)
-{
- static struct notifier_block msic_scu_notifier = {
- .notifier_call = msic_scu_status_change,
- };
-
- /*
- * We need to be sure that the SCU IPC is ready before MSIC device
- * can be registered.
- */
- if (intel_mid_has_msic())
- intel_scu_notifier_add(&msic_scu_notifier);
-
- return 0;
-}
-arch_initcall(msic_init);
-
-/*
- * msic_generic_platform_data - sets generic platform data for the block
- * @info: pointer to the SFI device table entry for this block
- * @block: MSIC block
- *
- * Function sets IRQ number from the SFI table entry for given device to
- * the MSIC platform data.
- */
-static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
-{
- struct sfi_device_table_entry *entry = info;
-
- BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
- msic_pdata.irq[block] = entry->irq;
-
- return no_platform_data(info);
-}
-
-static void *msic_battery_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
-}
-
-static void *msic_gpio_platform_data(void *info)
-{
- static struct intel_msic_gpio_pdata pdata;
- int gpio = get_gpio_by_name("msic_gpio_base");
-
- if (gpio < 0)
- return NULL;
-
- pdata.gpio_base = gpio;
- msic_pdata.gpio = &pdata;
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
-}
-
-static void *msic_audio_platform_data(void *info)
-{
- struct platform_device *pdev;
-
- pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
- if (IS_ERR(pdev)) {
- pr_err("failed to create audio platform device\n");
- return NULL;
- }
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
-}
-
-static void *msic_power_btn_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static void *msic_ocd_platform_data(void *info)
-{
- static struct intel_msic_ocd_pdata pdata;
- int gpio = get_gpio_by_name("ocd_gpio");
-
- if (gpio < 0)
- return NULL;
-
- pdata.gpio = gpio;
- msic_pdata.ocd = &pdata;
-
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
-}
-
-static void *msic_thermal_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
-}
-
-/* tc35876x DSI-LVDS bridge chip and panel platform data */
-static void *tc35876x_platform_data(void *data)
-{
- static struct tc35876x_platform_data pdata;
-
- /* gpio pins set to -1 will not be used by the driver */
- pdata.gpio_bridge_reset = get_gpio_by_name("LCMB_RXEN");
- pdata.gpio_panel_bl_en = get_gpio_by_name("6S6P_BL_EN");
- pdata.gpio_panel_vadd = get_gpio_by_name("EN_VREG_LCD_V3P3");
-
- return &pdata;
-}
-
-static const struct devs_id __initconst device_ids[] = {
- {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data, NULL},
- {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data, NULL},
- {"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data, &ipc_device_handler},
- {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data, NULL},
- {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
- {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data, NULL},
- {"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data, NULL},
- {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data, NULL},
- {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data, NULL},
- {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data, &ipc_device_handler},
- {"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data, NULL},
- {"i2c_disp_brig", SFI_DEV_TYPE_I2C, 0, &tc35876x_platform_data, NULL},
-
- /* MSIC subdevices */
- {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data, &ipc_device_handler},
- {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data, &ipc_device_handler},
- {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data, &ipc_device_handler},
- {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data, &ipc_device_handler},
- {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data, &ipc_device_handler},
- {"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data, &ipc_device_handler},
- { 0 }
-};
-
-static void __init ipc_device_handler(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct platform_device *pdev;
- void *pdata = NULL;
- static struct resource res __initdata = {
- .name = "IRQ",
- .flags = IORESOURCE_IRQ,
- };
-
- pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
- pentry->name, pentry->irq);
-
- /*
- * We need to call platform init of IPC devices to fill misc_pdata
- * structure. It will be used in msic_init for initialization.
- */
- if (dev != NULL)
- pdata = dev->get_platform_data(pentry);
-
- /*
- * On Medfield the platform device creation is handled by the MSIC
- * MFD driver so we don't need to do it here.
- */
- if (intel_mid_has_msic())
- return;
-
- pdev = platform_device_alloc(pentry->name, 0);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- return;
- }
- res.start = pentry->irq;
- platform_device_add_resources(pdev, &res, 1);
-
- pdev->dev.platform_data = pdata;
- intel_scu_device_register(pdev);
-}
-
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
- {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
- {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
- {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
- {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
- {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
- {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
- {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
- {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
-};
-
-static struct gpio_keys_platform_data intel_mid_gpio_keys = {
- .buttons = gpio_button,
- .rep = 1,
- .nbuttons = -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &intel_mid_gpio_keys,
- },
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
- struct gpio_keys_button *gb = gpio_button;
- int i, num, good = 0;
-
- num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
- for (i = 0; i < num; i++) {
- gb[i].gpio = get_gpio_by_name(gb[i].desc);
- pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
- gb[i].gpio);
- if (gb[i].gpio == -1)
- continue;
-
- if (i != good)
- gb[good] = gb[i];
- good++;
- }
-
- if (good) {
- intel_mid_gpio_keys.nbuttons = good;
- return platform_device_register(&pb_device);
- }
- return 0;
-}
-late_initcall(pb_keys_init);
\ No newline at end of file
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index 3f1c171..f75e50f 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -42,7 +42,6 @@
#include <asm/intel_scu_ipc.h>
#include <asm/apb_timer.h>
#include <asm/reboot.h>
-#include "intel_mid_weak_decls.h"
#define SFI_SIG_OEM0 "OEM0"
#define MAX_IPCDEVS 24
@@ -403,19 +402,19 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
i2c_register_board_info(pentry->host_num, &i2c_info, 1);
}
+extern struct devs_id *__x86_intel_mid_dev_start,
+ *__x86_intel_mid_dev_end;
+
static struct devs_id __init *get_device_id(u8 type, char *name)
{
- struct devs_id *dev = device_ids;
-
- if (device_ids == NULL)
- return NULL;
+ struct devs_id *dev;
- while (dev->name[0]) {
+ for (dev = __x86_intel_mid_dev_start;
+ dev < __x86_intel_mid_dev_end; dev++) {
if (dev->type == type &&
!strncmp(dev->name, name, SFI_NAME_LEN)) {
return dev;
}
- dev++;
}
return NULL;
--
1.8.4.rc3
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v4 12/12] intel_mid: Moved board related code to a new file
2013-10-15 23:42 ` [PATCH v4 12/12] intel_mid: Moved board related code to a new file David Cohen
@ 2013-10-15 23:44 ` H. Peter Anvin
2013-10-15 23:53 ` David Cohen
0 siblings, 1 reply; 17+ messages in thread
From: H. Peter Anvin @ 2013-10-15 23:44 UTC (permalink / raw)
To: David Cohen; +Cc: mingo, tglx, x86, linux-kernel, Kuppuswamy Sathyanarayanan
On 10/15/2013 04:42 PM, David Cohen wrote:
>
> +#define intel_mid_sfi_dev(i) \
> + static const struct devs_id *__intel_mid_sfi_##i##_dev __used \
> + __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
> +
Any reason to not just call this "sfi_device()" or something similar?
"Intel MID SFI" seems a bit redundant...
-hpa
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v4 12/12] intel_mid: Moved board related code to a new file
2013-10-15 23:44 ` H. Peter Anvin
@ 2013-10-15 23:53 ` David Cohen
2013-10-16 0:45 ` H. Peter Anvin
0 siblings, 1 reply; 17+ messages in thread
From: David Cohen @ 2013-10-15 23:53 UTC (permalink / raw)
To: H. Peter Anvin; +Cc: mingo, tglx, x86, linux-kernel, Kuppuswamy Sathyanarayanan
On 10/15/2013 04:44 PM, H. Peter Anvin wrote:
> On 10/15/2013 04:42 PM, David Cohen wrote:
>>
>> +#define intel_mid_sfi_dev(i) \
>> + static const struct devs_id *__intel_mid_sfi_##i##_dev __used \
>> + __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
>> +
>
> Any reason to not just call this "sfi_device()" or something similar?
> "Intel MID SFI" seems a bit redundant...
I had the same though. But struct devs_id is defined by asm/intel-mid.h.
This function is not meant to be used by any other user beside
intel-mid.
But I can change if you prefer.
Br, David Cohen
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v4 12/12] intel_mid: Moved board related code to a new file
2013-10-15 23:53 ` David Cohen
@ 2013-10-16 0:45 ` H. Peter Anvin
2013-10-16 3:59 ` David Cohen
0 siblings, 1 reply; 17+ messages in thread
From: H. Peter Anvin @ 2013-10-16 0:45 UTC (permalink / raw)
To: David Cohen; +Cc: mingo, tglx, x86, linux-kernel, Kuppuswamy Sathyanarayanan
On 10/15/2013 04:53 PM, David Cohen wrote:
> On 10/15/2013 04:44 PM, H. Peter Anvin wrote:
>> On 10/15/2013 04:42 PM, David Cohen wrote:
>>>
>>> +#define intel_mid_sfi_dev(i) \
>>> + static const struct devs_id *__intel_mid_sfi_##i##_dev __used \
>>> + __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
>>> +
>>
>> Any reason to not just call this "sfi_device()" or something similar?
>> "Intel MID SFI" seems a bit redundant...
>
> I had the same though. But struct devs_id is defined by asm/intel-mid.h.
> This function is not meant to be used by any other user beside
> intel-mid.
> But I can change if you prefer.
>
Hm, I guess it doesn't really matter. After all, no other devices will
probably ever see SFI (we hope).
-hpa
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v4 12/12] intel_mid: Moved board related code to a new file
2013-10-16 0:45 ` H. Peter Anvin
@ 2013-10-16 3:59 ` David Cohen
0 siblings, 0 replies; 17+ messages in thread
From: David Cohen @ 2013-10-16 3:59 UTC (permalink / raw)
To: H. Peter Anvin; +Cc: mingo, tglx, x86, linux-kernel, Kuppuswamy Sathyanarayanan
On 10/15/2013 05:45 PM, H. Peter Anvin wrote:
> On 10/15/2013 04:53 PM, David Cohen wrote:
>> On 10/15/2013 04:44 PM, H. Peter Anvin wrote:
>>> On 10/15/2013 04:42 PM, David Cohen wrote:
>>>>
>>>> +#define intel_mid_sfi_dev(i) \
>>>> + static const struct devs_id *__intel_mid_sfi_##i##_dev __used \
>>>> + __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
>>>> +
>>>
>>> Any reason to not just call this "sfi_device()" or something similar?
>>> "Intel MID SFI" seems a bit redundant...
>>
>> I had the same though. But struct devs_id is defined by asm/intel-mid.h.
>> This function is not meant to be used by any other user beside
>> intel-mid.
>> But I can change if you prefer.
>>
>
> Hm, I guess it doesn't really matter. After all, no other devices will
> probably ever see SFI (we hope).
I hope too :)
Let me send a new version with this change.
Br, David Cohen
^ permalink raw reply [flat|nested] 17+ messages in thread