From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934601Ab3JPNxO (ORCPT ); Wed, 16 Oct 2013 09:53:14 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:58045 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934522Ab3JPNxJ (ORCPT ); Wed, 16 Oct 2013 09:53:09 -0400 Message-ID: <525E9A11.7080501@ti.com> Date: Wed, 16 Oct 2013 19:22:17 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130803 Thunderbird/17.0.8 MIME-Version: 1.0 To: Roger Quadros CC: , , , , , , , , , , , , , , , , , , , Subject: Re: [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework References: <1381866857-3861-1-git-send-email-kishon@ti.com> <1381866857-3861-3-git-send-email-kishon@ti.com> <525E9232.9050502@ti.com> In-Reply-To: <525E9232.9050502@ti.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On Wednesday 16 October 2013 06:48 PM, Roger Quadros wrote: > Hi, > > On 10/15/2013 10:54 PM, Kishon Vijay Abraham I wrote: >> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit, >> power_on and power_off the following APIs are used phy_init(), phy_exit(), >> phy_power_on() and phy_power_off(). >> >> However using the old USB phy library wont be removed till the PHYs of all >> other SoC's using dwc3 core is adapted to the Generic PHY Framework. >> >> Signed-off-by: Kishon Vijay Abraham I >> --- >> Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++- >> drivers/usb/dwc3/Kconfig | 1 + >> drivers/usb/dwc3/core.c | 52 ++++++++++++++++++++++++ >> drivers/usb/dwc3/core.h | 7 ++++ >> drivers/usb/dwc3/platform_data.h | 2 + >> 5 files changed, 66 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >> index e807635..471366d 100644 >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >> @@ -6,11 +6,13 @@ Required properties: >> - compatible: must be "snps,dwc3" >> - reg : Address and length of the register set for the device >> - interrupts: Interrupts used by the dwc3 controller. >> + >> +Optional properties: >> - usb-phy : array of phandle for the PHY device. The first element >> in the array is expected to be a handle to the USB2/HS PHY and >> the second element is expected to be a handle to the USB3/SS PHY >> - >> -Optional properties: >> + - phys: from the *Generic PHY* bindings >> + - phy-names: from the *Generic PHY* bindings >> - tx-fifo-resize: determines if the FIFO *has* to be reallocated. >> >> This is usually a subnode to DWC3 glue to which it is connected. >> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig >> index 8e385b4..64eed6f 100644 >> --- a/drivers/usb/dwc3/Kconfig >> +++ b/drivers/usb/dwc3/Kconfig >> @@ -2,6 +2,7 @@ config USB_DWC3 >> tristate "DesignWare USB3 DRD Core Support" >> depends on (USB || USB_GADGET) && HAS_DMA >> select USB_PHY >> + select GENERIC_PHY >> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD >> help >> Say Y or M here if your system has a Dual Role SuperSpeed >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c >> index cb91d70..28bfa5b 100644 >> --- a/drivers/usb/dwc3/core.c >> +++ b/drivers/usb/dwc3/core.c >> @@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) >> >> usb_phy_init(dwc->usb2_phy); >> usb_phy_init(dwc->usb3_phy); >> + >> + if (dwc->usb2_generic_phy) >> + phy_init(dwc->usb2_generic_phy); >> + if (dwc->usb3_generic_phy) >> + phy_init(dwc->usb3_generic_phy); >> + > > dwc3_core_soft_reset() is called from dwc3_core_init() which is called from > dwc3_probe() but before the PHYs are initialized. > > This will cause phy power_on() to be called before phy_init() which is wrong. > >> mdelay(100); >> >> /* Clear USB3 PHY reset */ >> @@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc) >> { >> usb_phy_shutdown(dwc->usb2_phy); >> usb_phy_shutdown(dwc->usb3_phy); >> + >> + if (dwc->usb2_generic_phy) >> + phy_power_off(dwc->usb2_generic_phy); >> + if (dwc->usb3_generic_phy) >> + phy_power_off(dwc->usb3_generic_phy); >> } >> >> #define DWC3_ALIGN_MASK (16 - 1) >> @@ -439,6 +450,26 @@ static int dwc3_probe(struct platform_device *pdev) >> dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); >> } >> >> + count = of_property_match_string(node, "phy-names", "usb2-phy"); >> + if (count >= 0 || (pdata && pdata->usb2_generic_phy)) { >> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); >> + if (IS_ERR(dwc->usb2_generic_phy)) { >> + dev_err(dev, "no usb2 phy configured yet"); >> + return PTR_ERR(dwc->usb2_generic_phy); >> + } >> + dwc->usb2_phy = NULL; >> + } >> + >> + count = of_property_match_string(node, "phy-names", "usb3-phy"); >> + if (count >= 0 || (pdata && pdata->usb3_generic_phy)) { >> + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); >> + if (IS_ERR(dwc->usb3_generic_phy)) { >> + dev_err(dev, "no usb3 phy configured yet"); >> + return PTR_ERR(dwc->usb3_generic_phy); >> + } >> + dwc->usb3_phy = NULL; >> + } >> + > > There are a couple of issues here. > - The above code must be executed only if it node is valid. of_property_match_string will give a error value if the node is not present. *count >= 0* can take care of this. > - We must either get both PHYs via old method or via new method and not support mix matching > them. e.g. it is possible with this code that usb2_phy is set and usb3_generic_phy is set. Why? As long as both the frameworks co-exist (and we support both in dwc3), I don't see any reason why we shouldn't allow it. We can avoid adding a few more checks by leaving it the way it is currently. Thanks Kishon