* [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
@ 2013-10-07 10:46 Roger Quadros
2013-10-10 15:33 ` Felipe Balbi
2013-10-18 12:00 ` Roger Quadros
0 siblings, 2 replies; 4+ messages in thread
From: Roger Quadros @ 2013-10-07 10:46 UTC (permalink / raw)
To: bcousson
Cc: balbi, tony, kishon, bigeasy, linux-usb, linux-omap,
linux-arm-kernel, devicetree, linux-kernel, Roger Quadros
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB OTG port on beagle after the Generic PHY framework was
merged in greg/usb-next. [1]
[1] - https://lkml.org/lkml/2013/9/27/581
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap3-beagle.dts | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 7669c16..fa532aa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -173,6 +173,8 @@
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
2013-10-07 10:46 [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework Roger Quadros
@ 2013-10-10 15:33 ` Felipe Balbi
2013-10-18 12:00 ` Roger Quadros
1 sibling, 0 replies; 4+ messages in thread
From: Felipe Balbi @ 2013-10-10 15:33 UTC (permalink / raw)
To: Roger Quadros
Cc: bcousson, balbi, tony, kishon, bigeasy, linux-usb, linux-omap,
linux-arm-kernel, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 442 bytes --]
On Mon, Oct 07, 2013 at 01:46:50PM +0300, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
2013-10-07 10:46 [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework Roger Quadros
2013-10-10 15:33 ` Felipe Balbi
@ 2013-10-18 12:00 ` Roger Quadros
2013-10-18 15:59 ` Benoit Cousson
1 sibling, 1 reply; 4+ messages in thread
From: Roger Quadros @ 2013-10-18 12:00 UTC (permalink / raw)
To: bcousson
Cc: Roger Quadros, balbi, tony, kishon, bigeasy, linux-usb,
linux-omap, linux-arm-kernel, devicetree, linux-kernel,
Stefan Roese
Hi Benoit,
Could you please include this one for 3.13?
Without this OTG port will be broken for beagle. Thanks.
cheers,
-roger
On 10/07/2013 01:46 PM, Roger Quadros wrote:
> The generic PHY framewrok expects different properties than the
> old USB PHY framework. Supply those properties.
>
> Fixes USB OTG port on beagle after the Generic PHY framework was
> merged in greg/usb-next. [1]
>
> [1] - https://lkml.org/lkml/2013/9/27/581
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 7669c16..fa532aa 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -173,6 +173,8 @@
> &usb_otg_hs {
> interface-type = <0>;
> usb-phy = <&usb2_phy>;
> + phys = <&usb2_phy>;
> + phy-names = "usb2-phy";
> mode = <3>;
> power = <50>;
> };
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework
2013-10-18 12:00 ` Roger Quadros
@ 2013-10-18 15:59 ` Benoit Cousson
0 siblings, 0 replies; 4+ messages in thread
From: Benoit Cousson @ 2013-10-18 15:59 UTC (permalink / raw)
To: Roger Quadros
Cc: balbi, tony, kishon, bigeasy, linux-usb, linux-omap,
linux-arm-kernel, devicetree, linux-kernel, Stefan Roese
Hi Roger,
On 18/10/2013 14:00, Roger Quadros wrote:
> Hi Benoit,
>
> Could you please include this one for 3.13?
> Without this OTG port will be broken for beagle. Thanks.
>
I've just applied it.
Thanks,
Benoit
> cheers,
> -roger
>
> On 10/07/2013 01:46 PM, Roger Quadros wrote:
>> The generic PHY framewrok expects different properties than the
>> old USB PHY framework. Supply those properties.
>>
>> Fixes USB OTG port on beagle after the Generic PHY framework was
>> merged in greg/usb-next. [1]
>>
>> [1] - https://lkml.org/lkml/2013/9/27/581
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> arch/arm/boot/dts/omap3-beagle.dts | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index 7669c16..fa532aa 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -173,6 +173,8 @@
>> &usb_otg_hs {
>> interface-type = <0>;
>> usb-phy = <&usb2_phy>;
>> + phys = <&usb2_phy>;
>> + phy-names = "usb2-phy";
>> mode = <3>;
>> power = <50>;
>> };
>>
>
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-10-18 16:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-07 10:46 [PATCH] ARM: dts: omap3-beagle: Adapt USB OTG to generic PHY framework Roger Quadros
2013-10-10 15:33 ` Felipe Balbi
2013-10-18 12:00 ` Roger Quadros
2013-10-18 15:59 ` Benoit Cousson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox