From: saravanan_sprt@hotmail.com
To: linux-kernel@vger.kernel.org
Subject: UCB1400 pxa2xx-ac97 failed with error -13 on PXA2xx
Date: Fri, 27 Oct 2006 23:50:09 +0800 [thread overview]
Message-ID: <5263041.1161964209062.JavaMail.websites@opensubscriber> (raw)
In-Reply-To: <200507281729.j6SHTtTa005793@hera.kernel.org>
Hi,
I am facing the following problem with ALSA and UCB1400 codec on Colibri PXA270. After having applied Nicolas patches and platform entries in colibri.c, I get the following boot up error messages which annoys me a lot.
.........
ts: UCB1x00 touchscreen protocol output
ts: Compaq touchscreen protocol output
Colibri MMC/SD setup done.
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
pxa2xx_ac97_reset: cold reset timeout (GSR=0x0)
pxa2xx_ac97_reset: warm reset timeout (GSR=0x0)
pxa2xx_ac97_read: CAR_CAIP already set
pxa2xx_ac97_write: CAR_CAIP already set
pxa2xx_ac97_read: CAR_CAIP already set
pxa2xx_ac97_read: CAR_CAIP already set
ALSA sound/pci/ac97/ac97_codec.c:1932: AC'97 0 access error (not audio or modem codec)
pxa2xx-ac97: probe of pxa2xx-ac97 failed with error -13
ALSA device list:
No soundcards found.
.....
Can anyone tell me what went wrong and here's the kernel config which I use similar to the previous posts by Takács Áron.
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_MEMORY is not set
# CONFIG_SND_DEBUG_DETECT is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_CODEC=y
#
# ALSA ARM devices
#
CONFIG_SND_PXA2xx_AC97=y
CONFIG_SND_PXA2xx_PCM=y
and made the following changes in the colibri.c for platform entries
static struct platform_device ucb1400_audio_device = {
.name = "pxa2xx-ac97",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_DM9000
&dm9000_device,
#endif
&ucb1400_audio_device,
};
It would be garteful, if anyone could help me to fix these issues.
Thanks
Sara
--
This message was sent on behalf of saravanan_sprt@hotmail.com at openSubscriber.com
http://www.opensubscriber.com/message/linux-kernel@vger.kernel.org/1825733.html
next parent reply other threads:[~2006-10-27 15:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200507281729.j6SHTtTa005793@hera.kernel.org>
2006-10-27 15:50 ` saravanan_sprt [this message]
2006-10-27 16:11 ` UCB1400 pxa2xx-ac97 failed with error -13 on PXA2xx Lee Revell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5263041.1161964209062.JavaMail.websites@opensubscriber \
--to=saravanan_sprt@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox