* Re: Intel Haswell kernel warning (3.11.2)
2013-09-29 15:12 ` Daniel Vetter
@ 2013-10-24 6:09 ` Reto Glauser
0 siblings, 0 replies; 7+ messages in thread
From: Reto Glauser @ 2013-10-24 6:09 UTC (permalink / raw)
To: Borislav Petkov, Wakko Warner, intel-gfx, linux-kernel, dri-devel
[-- Attachment #1: Type: text/plain, Size: 26958 bytes --]
On 09/29/2013 05:12 PM, Daniel Vetter wrote:
> Please boot with drm.debug=0xe, reproduce the WARN and then attach the
> full dmesg.
>
This is a segfault on kernel 3.11.3. There's no X started yet, but one
s2ram cycle.
Attached is the complete dmesg with drm.debug=0xe or on
http://pastebin.com/raw.php?i=dqh0RjVG .
The surrounding messages:
[ 39.192856] ACPI: Low-level resume complete
[ 39.192887] PM: Restoring platform NVS memory
[ 39.193638] Enabling non-boot CPUs ...
[ 39.193720] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 39.207712] CPU1 is up
[ 39.207755] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 39.221845] CPU2 is up
[ 39.221893] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 39.235974] CPU3 is up
[ 39.236021] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 39.250015] CPU4 is up
[ 39.250065] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 39.264142] CPU5 is up
[ 39.264203] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 39.278323] CPU6 is up
[ 39.278378] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 39.292438] CPU7 is up
[ 39.299252] ACPI: Waking up from system sleep state S3
[ 39.332134] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 39.343112] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 39.365174] PM: noirq resume of devices complete after 65.731 msecs
[ 39.365234] PM: early resume of devices complete after 0.046 msecs
[ 39.365246] i915 0000:00:02.0: setting latency timer to 64
[ 39.365251] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 39.365257] e1000e 0000:00:19.0: setting latency timer to 64
[ 39.365265] ahci 0000:00:1f.2: setting latency timer to 64
[ 39.365290] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 39.365304] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 39.365310] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off,
defaulting to EHCI.
[ 39.365310] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0
speeds.
[ 39.365331] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 39.365336] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off,
defaulting to EHCI.
[ 39.365336] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0
speeds.
[ 39.366127] [drm:i915_redisable_vga], Something enabled VGA plane,
disabling it
[ 39.366442] [drm:intel_opregion_setup], graphic opregion physical
addr: 0xccafc018
[ 39.366449] [drm:intel_opregion_setup], Public ACPI methods supported
[ 39.366449] [drm:intel_opregion_setup], SWSCI supported
[ 39.366449] [drm:intel_opregion_setup], ASLE supported
[ 39.404149] [drm:init_status_page], render ring hws offset: 0x00000000
[ 39.406086] [drm:init_pipe_control], render ring pipe control offset:
0x00021000
[ 39.406098] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 39.406239] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 39.406368] [drm:init_status_page], video enhancement ring hws
offset: 0x00064000
[ 39.406572] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers
for port A in DP mode
[ 39.406583] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers
for port B in DP mode
[ 39.406594] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers
for port C in DP mode
[ 39.406605] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers
for port D in DP mode
[ 39.406617] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers
for port E in FDI mode
[ 39.406662] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state
readout: disabled
[ 39.406665] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state
readout: disabled
[ 39.406668] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state
readout: disabled
[ 39.406673] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10]
hw state readout: disabled, pipe=0
[ 39.406677] [drm:intel_modeset_readout_hw_state],
[ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
[ 39.406680] [drm:intel_modeset_readout_hw_state],
[ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
[ 39.406682] [drm:intel_modeset_readout_hw_state],
[ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
[ 39.406686] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1]
hw state readout: disabled
[ 39.406690] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:DP-1]
hw state readout: disabled
[ 39.406693] [drm:intel_modeset_readout_hw_state],
[CONNECTOR:15:HDMI-A-1] hw state readout: disabled
[ 39.406696] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:DP-2]
hw state readout: disabled
[ 39.406699] [drm:intel_modeset_readout_hw_state],
[CONNECTOR:18:HDMI-A-2] hw state readout: disabled
[ 39.406701] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-3]
hw state readout: disabled
[ 39.406704] [drm:intel_modeset_readout_hw_state],
[CONNECTOR:21:HDMI-A-3] hw state readout: disabled
[ 39.406708] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state]
config for pipe A
[ 39.406710] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 39.406713] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 39.406716] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0,
gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406718] [drm:intel_dump_pipe_config], requested mode:
[ 39.406723] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0
0 0 0 0 0 0 0x0 0x0
[ 39.406724] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406728] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0
0 0 0 0 0 0 0x0 0x0
[ 39.406732] [drm:intel_dump_pipe_config], gmch pfit: control:
0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406734] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,
size: 0x00000000
[ 39.406735] [drm:intel_dump_pipe_config], ips: 0
[ 39.406739] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state]
config for pipe B
[ 39.406740] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 39.406742] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 39.406745] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0,
gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406747] [drm:intel_dump_pipe_config], requested mode:
[ 39.406750] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0
0 0 0 0 0 0 0x0 0x0
[ 39.406752] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406756] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0
0 0 0 0 0 0 0x0 0x0
[ 39.406758] [drm:intel_dump_pipe_config], gmch pfit: control:
0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406760] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,
size: 0x00000000
[ 39.406762] [drm:intel_dump_pipe_config], ips: 0
[ 39.406765] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state]
config for pipe C
[ 39.406766] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 39.406768] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 39.406771] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0,
gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406773] [drm:intel_dump_pipe_config], requested mode:
[ 39.406776] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0
0 0 0 0 0 0 0x0 0x0
[ 39.406778] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406781] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0
0 0 0 0 0 0 0x0 0x0
[ 39.406784] [drm:intel_dump_pipe_config], gmch pfit: control:
0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406786] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,
size: 0x00000000
[ 39.406787] [drm:intel_dump_pipe_config], ips: 0
[ 39.406791] [drm:intel_modeset_affected_pipes], set mode pipe masks:
modeset: 1, prepare: 1, disable: 0
[ 39.406796] [drm:connected_sink_compute_bpp], [CONNECTOR:15:HDMI-A-1]
checking for sink bpp constrains
[ 39.406799] [drm:intel_hdmi_compute_config], picking bpc to 8 for
HDMI output
[ 39.406801] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24
for HDMI
[ 39.406804] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp:
24, dithering: 0
[ 39.406807] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config
for pipe A
[ 39.406808] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 39.406810] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 39.406813] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0,
gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406815] [drm:intel_dump_pipe_config], requested mode:
[ 39.406820] [drm:drm_mode_debug_printmodeline], Modeline
0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 39.406821] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406825] [drm:drm_mode_debug_printmodeline], Modeline
0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 39.406828] [drm:intel_dump_pipe_config], gmch pfit: control:
0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406830] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,
size: 0x00000000
[ 39.406832] [drm:intel_dump_pipe_config], ips: 0
[ 39.406838] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 1
[ 39.406839] ------------[ cut here ]------------
[ 39.406861] WARNING: CPU: 1 PID: 1591 at
drivers/gpu/drm/i915/intel_ddi.c:383 intel_ddi_put_crtc_pll+0x272/0x280
[i915]()
[ 39.406869] Modules linked in: e1000e i915 ptp ehci_pci ehci_hcd
i2c_i801 pps_core
[ 39.406873] CPU: 1 PID: 1591 Comm: kworker/u16:21 Not tainted
3.11.3-gentoo #1
[ 39.406875] Hardware name: ASUS All Series/Z87-PRO, BIOS 0801 04/19/2013
[ 39.406883] Workqueue: events_unbound async_run_entry_fn
[ 39.406887] 0000000000000009 ffff8807fa6119f0 ffffffff817e25b6
0000000000000000
[ 39.406891] ffff8807fa611a28 ffffffff8103f223 ffff8807fb5b0000
ffff8807fe726000
[ 39.406894] 0000000000025990 0000000000000000 ffff8807fb72a000
ffff8807fa611a38
[ 39.406895] Call Trace:
[ 39.406903] [<ffffffff817e25b6>] dump_stack+0x45/0x56
[ 39.406909] [<ffffffff8103f223>] warn_slowpath_common+0x73/0x90
[ 39.406914] [<ffffffff8103f2f5>] warn_slowpath_null+0x15/0x20
[ 39.406927] [<ffffffffa006bb42>] intel_ddi_put_crtc_pll+0x272/0x280
[i915]
[ 39.406938] [<ffffffffa006bb94>] intel_ddi_pll_mode_set+0x44/0x8a0
[i915]
[ 39.406943] [<ffffffff814ef03c>] ? drm_vblank_get+0x6c/0x2c0
[ 39.406952] [<ffffffffa0039cd7>] ? i915_read32+0x57/0xd0 [i915]
[ 39.406967] [<ffffffffa006088a>] haswell_crtc_mode_set+0x3a/0x320 [i915]
[ 39.406996] [<ffffffffa0061a60>] __intel_set_mode+0x5b0/0x12f0 [i915]
[ 39.407010] [<ffffffffa00671a5>]
intel_modeset_setup_hw_state+0x755/0xa40 [i915]
[ 39.407018] [<ffffffff817e4a2d>] ? mutex_lock+0xd/0x2a
[ 39.407026] [<ffffffffa0039247>] __i915_drm_thaw+0x117/0x1b0 [i915]
[ 39.407034] [<ffffffffa003966a>] i915_resume+0x6a/0xb0 [i915]
[ 39.407042] [<ffffffffa00396c1>] i915_pm_resume+0x11/0x20 [i915]
[ 39.407049] [<ffffffff8144e1ff>] pci_pm_resume+0x5f/0xb0
[ 39.407054] [<ffffffff8144e1a0>] ? pci_pm_restore+0xb0/0xb0
[ 39.407061] [<ffffffff8153c679>] dpm_run_callback.isra.12+0x19/0x50
[ 39.407066] [<ffffffff8153c73e>] device_resume+0x8e/0x130
[ 39.407071] [<ffffffff8153c7f8>] async_resume+0x18/0x40
[ 39.407075] [<ffffffff810617c2>] async_run_entry_fn+0x32/0x130
[ 39.407083] [<ffffffff81054c36>] process_one_work+0x146/0x3d0
[ 39.407088] [<ffffffff81055809>] worker_thread+0x119/0x390
[ 39.407093] [<ffffffff810556f0>] ? manage_workers.isra.24+0x2a0/0x2a0
[ 39.407098] [<ffffffff8105b42b>] kthread+0xbb/0xc0
[ 39.407102] [<ffffffff8105b370>] ? kthread_create_on_node+0x110/0x110
[ 39.407107] [<ffffffff817e8a6c>] ret_from_fork+0x7c/0xb0
[ 39.407111] [<ffffffff8105b370>] ? kthread_create_on_node+0x110/0x110
[ 39.407114] ---[ end trace 13d5f7e465dbce0f ]---
[ 39.407117] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe A
[ 39.409796] [drm:intel_ddi_calculate_wrpll], WRPLL: 154000000Hz
refresh rate with p=6, n2=53 r2=31
[ 39.409835] [drm:ironlake_update_plane], Writing base 000A1000
00000000 0 0 7680
[ 39.409850] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set
[MODE:0:1920x1200]
[ 39.409853] [drm:intel_ddi_mode_set], Preparing DDI mode on port B,
pipe A
[ 39.461955] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 39.513873] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 39.515875] [drm:intel_modeset_affected_pipes], set mode pipe masks:
modeset: 2, prepare: 2, disable: 0
[ 39.515880] [drm:connected_sink_compute_bpp], [CONNECTOR:17:DP-2]
checking for sink bpp constrains
[ 39.515885] [drm:intel_dp_compute_config], DP link computation with
max lane count 4 max bw 0a pixel clock 193250KHz
[ 39.515895] [drm:intel_dp_compute_config], DP link bw 06 lane count 4
clock 162000 bpp 24
[ 39.515898] [drm:intel_dp_compute_config], DP link bw required 463800
available 518400
[ 39.515901] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp:
24, dithering: 0
[ 39.515904] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config
for pipe B
[ 39.515906] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 39.515908] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 39.515911] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0,
gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.515913] [drm:intel_dump_pipe_config], requested mode:
[ 39.515918] [drm:drm_mode_debug_printmodeline], Modeline
0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 39.515920] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.515925] [drm:drm_mode_debug_printmodeline], Modeline
0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 39.515927] [drm:intel_dump_pipe_config], gmch pfit: control:
0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.515929] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000,
size: 0x00000000
[ 39.515931] [drm:intel_dump_pipe_config], ips: 0
[ 39.515956] [drm:ironlake_update_plane], Writing base 000A1000
00000000 0 0 7680
[ 39.515968] [drm:intel_crtc_mode_set], [ENCODER:16:TMDS-16] set
[MODE:0:1920x1200]
[ 39.515971] [drm:intel_ddi_mode_set], Preparing DDI mode on port C,
pipe B
[ 39.515973] [drm:intel_ddi_mode_set], DP audio on pipe B on DDI
[ 39.515974] [drm:intel_ddi_mode_set], DP audio: write eld information
[ 39.515979] [drm:intel_write_eld], ELD on [CONNECTOR:17:DP-2],
[ENCODER:16:TMDS-16]
[ 39.515981] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
[ 39.515983] [drm:haswell_write_eld], HDMI audio: enable codec
[ 39.567784] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 39.567790] [drm:haswell_write_eld], HDMI audio: pin eld vld
status=0x 40
[ 39.567795] [drm:haswell_write_eld], HDMI audio: eld vld status=0x
50
[ 39.567798] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60
[ 39.567802] [drm:haswell_write_eld], ELD on pipe B
[ 39.567805] [drm:haswell_write_eld], ELD: DisplayPort detected
[ 39.567812] [drm:haswell_write_eld], port num:0
[ 39.567814] [drm:haswell_write_eld], ELD size 9
[ 39.570850] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.575688] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.576902] usb 2-1.3: reset high-speed USB device number 3 using
ehci-pci
[ 39.579733] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.585734] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.585745] [drm:intel_dp_set_signal_levels], Using signal levels
00000000
[ 39.588711] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.591827] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.591836] [drm:intel_dp_set_signal_levels], Using signal levels
00000000
[ 39.594808] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.597921] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.602645] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.648648] [drm:intel_modeset_affected_pipes], set mode pipe masks:
modeset: 0, prepare: 0, disable: 0
[ 39.648660] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1]
[ 39.648664] [drm:intel_connector_check_state], [CONNECTOR:17:DP-2]
[ 39.648669] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 39.648673] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 39.648676] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 39.648679] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 39.648681] [drm:check_crtc_state], [CRTC:3]
[ 39.648688] [drm:check_crtc_state], [CRTC:5]
[ 39.648694] [drm:check_crtc_state], [CRTC:7]
[ 39.648700] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 39.648707] [drm:intel_resume_hotplug], running encoder hotplug functions
[ 39.651653] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.656519] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.660525] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.661588] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug
detect cycle: adpa=0xf40000
[ 39.669626] ata8: SATA link down (SStatus 0 SControl 300)
[ 39.669661] ata7: SATA link down (SStatus 0 SControl 300)
[ 39.671616] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug
adpa=0xf40000, result 0
[ 39.671619] [drm:intel_crt_detect], CRT not detected via hotplug
[ 39.671634] ata5: SATA link down (SStatus 0 SControl 300)
[ 39.671656] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 39.671814] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr:
0050 r(1)
[ 39.671818] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus vga
[ 39.671820] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed,
retry using GPIO bit-banging
[ 39.671823] [drm:intel_gmbus_force_bit], enabling bit-banging on i915
gmbus vga. force bit now 1
[ 39.672153] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus vga
[ 39.672156] [drm:intel_gmbus_force_bit], disabling bit-banging on
i915 gmbus vga. force bit now 0
[ 39.672158] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50
[no valid EDID found]
[ 39.672163] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1]
status updated from unknown to disconnected
[ 39.672971] ata2.00: configured for UDMA/133
[ 39.673038] sd 1:0:0:0: [sdb] Starting disk
[ 39.675109] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.675585] ata6: SATA link down (SStatus 0 SControl 300)
[ 39.675608] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 39.677386] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND
(20130517/psargs-359)
[ 39.677399] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bd1d308), AE_NOT_FOUND
(20130517/psparse-536)
[ 39.679505] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.679566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 39.683483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.684555] [drm:drm_helper_hpd_irq_event], [CONNECTOR:12:DP-1]
status updated from unknown to disconnected
[ 39.697243] [drm:drm_helper_hpd_irq_event], [CONNECTOR:15:HDMI-A-1]
status updated from unknown to connected
[ 39.697249] [drm:drm_helper_hpd_irq_event], [CONNECTOR:17:DP-2]
status updated from unknown to disconnected
[ 39.697419] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr:
0050 r(1)
[ 39.697422] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpc
[ 39.697427] [drm:drm_helper_hpd_irq_event], [CONNECTOR:18:HDMI-A-2]
status updated from unknown to disconnected
[ 39.697433] [drm:drm_helper_hpd_irq_event], [CONNECTOR:20:DP-3]
status updated from unknown to disconnected
[ 39.697592] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr:
0050 r(1)
[ 39.697595] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpd
[ 39.697600] [drm:drm_helper_hpd_irq_event], [CONNECTOR:21:HDMI-A-3]
status updated from unknown to disconnected
[ 39.697631] [drm:drm_fb_helper_hotplug_event],
[ 39.697636] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:9:VGA-1]
[ 39.697642] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug
adpa=0xf40000, result 0
[ 39.697645] [drm:intel_crt_detect], CRT not detected via hotplug
[ 39.697813] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr:
0050 r(1)
[ 39.697816] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus vga
[ 39.697818] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed,
retry using GPIO bit-banging
[ 39.697820] [drm:intel_gmbus_force_bit], enabling bit-banging on i915
gmbus vga. force bit now 1
[ 39.698149] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus vga
[ 39.698151] [drm:intel_gmbus_force_bit], disabling bit-banging on
i915 gmbus vga. force bit now 0
[ 39.698153] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50
[no valid EDID found]
[ 39.698156] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:9:VGA-1] disconnected
[ 39.698160] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:12:DP-1]
[ 39.701085] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.705437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.709434] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.710507] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:12:DP-1] disconnected
[ 39.710511] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:15:HDMI-A-1]
[ 39.714802] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND
(20130517/psargs-359)
[ 39.714815] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bd1d308), AE_NOT_FOUND
(20130517/psparse-536)
[ 39.714828] ata3.00: configured for UDMA/100
[ 39.734520] usb 2-1.4: reset full-speed USB device number 4 using
ehci-pci
[ 39.735896] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 39.735916] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:15:HDMI-A-1] probed modes :
[ 39.735925] [drm:drm_mode_debug_printmodeline], Modeline
23:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 39.735933] [drm:drm_mode_debug_printmodeline], Modeline
24:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[ 39.735940] [drm:drm_mode_debug_printmodeline], Modeline
29:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 39.735947] [drm:drm_mode_debug_printmodeline], Modeline
30:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
[ 39.735954] [drm:drm_mode_debug_printmodeline], Modeline
27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 39.735962] [drm:drm_mode_debug_printmodeline], Modeline
28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 39.735970] [drm:drm_mode_debug_printmodeline], Modeline
26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 39.735977] [drm:drm_mode_debug_printmodeline], Modeline
25:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
[ 39.735984] [drm:drm_mode_debug_printmodeline], Modeline
33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 39.735991] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600"
60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 39.735998] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480"
60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 39.736003] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:17:DP-2]
[ 39.736010] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:17:DP-2] disconnected
[ 39.736024] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:18:HDMI-A-2]
[ 39.736192] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr:
0050 r(1)
[ 39.736196] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpc
[ 39.736200] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:18:HDMI-A-2] disconnected
[ 39.736204] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:20:DP-3]
[ 39.736209] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:20:DP-3] disconnected
[ 39.736213] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:21:HDMI-A-3]
[ 39.736372] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr:
0050 r(1)
[ 39.736375] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpd
[ 39.736379] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:21:HDMI-A-3] disconnected
[ 39.736382] [drm:drm_setup_crtcs],
[ 39.736386] [drm:drm_enable_connectors], connector 9 enabled? no
[ 39.736390] [drm:drm_enable_connectors], connector 12 enabled? no
[ 39.736393] [drm:drm_enable_connectors], connector 15 enabled? yes
[ 39.736396] [drm:drm_enable_connectors], connector 17 enabled? no
[ 39.736399] [drm:drm_enable_connectors], connector 18 enabled? no
[ 39.736402] [drm:drm_enable_connectors], connector 20 enabled? no
[ 39.736405] [drm:drm_enable_connectors], connector 21 enabled? no
[ 39.736408] [drm:drm_target_preferred], looking for cmdline mode on
connector 15
[ 39.736411] [drm:drm_target_preferred], found mode 1920x1200
[ 39.736415] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 39.736421] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3
[ 39.736429] [drm:intel_crtc_set_config], [CRTC:3] [FB:56]
#connectors=1 (x y) (0 0)
[ 39.736436] [drm:intel_modeset_stage_output_state],
[CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 39.736440] [drm:intel_modeset_stage_output_state],
[CONNECTOR:17:DP-2] to [CRTC:5]
[ 39.736445] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 39.736450] [drm:intel_modeset_stage_output_state],
[CONNECTOR:17:DP-2] to [NOCRTC]
[ 39.736461] [drm:intel_modeset_stage_output_state], encoder changed,
full mode switch
[ 39.736466] [drm:intel_modeset_stage_output_state],
[CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 39.736469] [drm:intel_modeset_stage_output_state], crtc changed,
full mode switch
[ 39.736480] [drm:intel_modeset_affected_pipes], set mode pipe masks:
modeset: 0, prepare: 0, disable: 2
[ 39.764504] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1]
[ 39.764509] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 39.764512] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 39.764515] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 39.764518] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 39.764520] [drm:check_crtc_state], [CRTC:3]
[ 39.764527] [drm:check_crtc_state], [CRTC:5]
[ 39.764529] [drm:check_crtc_state], [CRTC:7]
[ 39.764534] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 39.764539] [drm:intel_modeset_stage_output_state],
[CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 39.767552] [drm:intel_crtc_set_config], [CRTC:3] [FB:56]
#connectors=1 (x y) (0 0)
[ 39.767557] [drm:intel_modeset_stage_output_state],
[CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[-- Attachment #2: dmesg_3.11.3-gentoo_2013-10-24 --]
[-- Type: text/plain, Size: 117929 bytes --]
[ 0.275028] ACPI: No dock devices found.
[ 0.280030] ACPI: Power Resource [FN00] (off)
[ 0.280154] ACPI: Power Resource [FN01] (off)
[ 0.280277] ACPI: Power Resource [FN02] (off)
[ 0.280403] ACPI: Power Resource [FN03] (off)
[ 0.280527] ACPI: Power Resource [FN04] (off)
[ 0.281106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.281324] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.281541] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.281918] PCI host bridge to bus 0000:00
[ 0.282002] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.282087] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.282172] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.282258] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.282344] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.282433] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.282519] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.282606] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.282693] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.282779] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.282866] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 0.282957] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.283011] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.283031] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.283064] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.283167] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.283174] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.283179] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.283182] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.283230] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.283235] pci 0000:00:03.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
[ 0.283300] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.283314] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
[ 0.283360] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.283389] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.283493] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.283507] pci 0000:00:16.0: reg 0x10: [mem 0xf063f000-0xf063f00f 64bit]
[ 0.283557] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.283608] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.283620] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
[ 0.283626] pci 0000:00:19.0: reg 0x14: [mem 0xf063d000-0xf063dfff]
[ 0.283632] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.283678] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.283708] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.283811] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.283827] pci 0000:00:1a.0: reg 0x10: [mem 0xf063c000-0xf063c3ff]
[ 0.283899] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.283938] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.284041] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.284051] pci 0000:00:1b.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
[ 0.284101] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.284131] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.284230] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.284279] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.284310] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.284408] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.284458] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.284490] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.284591] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.284641] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.284672] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.284777] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.284793] pci 0000:00:1d.0: reg 0x10: [mem 0xf063b000-0xf063b3ff]
[ 0.284864] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.284903] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.285007] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.285132] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.285143] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.285148] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.285153] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.285158] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.285164] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.285169] pci 0000:00:1f.2: reg 0x24: [mem 0xf063a000-0xf063a7ff]
[ 0.285196] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.285236] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.285247] pci 0000:00:1f.3: reg 0x10: [mem 0xf0639000-0xf06390ff 64bit]
[ 0.285262] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.285326] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.285460] acpiphp: Slot [1] registered
[ 0.285546] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.285686] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.285705] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf057ffff 64bit]
[ 0.285751] pci 0000:03:00.0: reg 0x30: [mem 0xf0580000-0xf058ffff pref]
[ 0.285798] pci 0000:03:00.0: supports D1 D2
[ 0.285799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285817] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.287551] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.287637] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.287694] pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
[ 0.287707] pci 0000:04:00.0: reg 0x10: [io 0xe050-0xe057]
[ 0.287716] pci 0000:04:00.0: reg 0x14: [io 0xe040-0xe043]
[ 0.287725] pci 0000:04:00.0: reg 0x18: [io 0xe030-0xe037]
[ 0.287734] pci 0000:04:00.0: reg 0x1c: [io 0xe020-0xe023]
[ 0.287744] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.287753] pci 0000:04:00.0: reg 0x24: [mem 0xf0400000-0xf04001ff]
[ 0.287820] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.289548] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.289633] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.289635] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.290049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.290517] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.290986] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.291452] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.291920] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.292385] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.292852] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.293318] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.294002] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.294147] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.294186] Found 1 acpi root devices
[ 0.294214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.294349] vgaarb: loaded
[ 0.294429] vgaarb: bridge control possible 0000:00:02.0
[ 0.294583] SCSI subsystem initialized
[ 0.294667] ACPI: bus type ATA registered
[ 0.294769] libata version 3.00 loaded.
[ 0.294777] ACPI: bus type USB registered
[ 0.294868] usbcore: registered new interface driver usbfs
[ 0.294956] usbcore: registered new interface driver hub
[ 0.295051] usbcore: registered new device driver usb
[ 0.295188] Advanced Linux Sound Architecture Driver Initialized.
[ 0.295274] PCI: Using ACPI for IRQ routing
[ 0.296456] PCI: pci_cache_line_size set to 64 bytes
[ 0.296486] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.296487] e820: reserve RAM buffer [mem 0xb934c000-0xbbffffff]
[ 0.296488] e820: reserve RAM buffer [mem 0xb9799000-0xbbffffff]
[ 0.296489] e820: reserve RAM buffer [mem 0xcc748000-0xcfffffff]
[ 0.296490] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.296490] e820: reserve RAM buffer [mem 0x81fe00000-0x81fffffff]
[ 0.296550] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.296902] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.298997] Switched to clocksource hpet
[ 0.299129] FS-Cache: Loaded
[ 0.299229] CacheFiles: Loaded
[ 0.300040] pnp: PnP ACPI init
[ 0.300123] ACPI: bus type PNP registered
[ 0.300235] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.300322] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.300329] pnp 00:01: [dma 4]
[ 0.300334] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.300344] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.300396] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.300464] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.300549] system 00:04: [io 0xffff] has been reserved
[ 0.300634] system 00:04: [io 0xffff] has been reserved
[ 0.300718] system 00:04: [io 0xffff] has been reserved
[ 0.300802] system 00:04: [io 0x1c00-0x1cfe] has been reserved
[ 0.300887] system 00:04: [io 0x1d00-0x1dfe] has been reserved
[ 0.300973] system 00:04: [io 0x1e00-0x1efe] has been reserved
[ 0.301063] system 00:04: [io 0x1f00-0x1ffe] has been reserved
[ 0.301148] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.301234] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.301319] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.301333] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.301356] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.301441] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.301486] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.301571] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.301594] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.301680] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.301690] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.301954] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.302044] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.302130] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.302217] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.302303] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.302389] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.302476] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.302562] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.302649] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.302736] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.302823] system 00:0a: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.302909] system 00:0a: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.302998] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303163] pnp: PnP ACPI: found 11 devices
[ 0.303246] ACPI: bus type PNP unregistered
[ 0.307848] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.307849] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.307850] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.307862] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.307863] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.307864] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.307866] pci 0000:00:1c.0: BAR 8: assigned [mem 0xdf200000-0xdf3fffff]
[ 0.307953] pci 0000:00:1c.0: BAR 9: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.308090] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.308176] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.308262] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.308346] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.308434] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.308521] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.308658] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.308743] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.308834] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.308918] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.309008] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.309242] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.309243] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.309244] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.309245] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.309245] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.309246] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.309247] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.309248] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.309249] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.309250] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[ 0.309251] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.309252] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.309253] pci_bus 0000:02: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.309253] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.309254] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.309255] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.309317] NET: Registered protocol family 2
[ 0.309660] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.310134] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.310305] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.310399] TCP: reno registered
[ 0.310500] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.310650] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.310845] NET: Registered protocol family 1
[ 0.311007] RPC: Registered named UNIX socket transport module.
[ 0.311092] RPC: Registered udp transport module.
[ 0.311175] RPC: Registered tcp transport module.
[ 0.311257] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.311347] pci 0000:00:02.0: Boot video device
[ 0.311406] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
[ 0.311540] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
[ 0.341980] PCI: CLS 64 bytes, default 64
[ 0.345744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.345832] software IO TLB [mem 0xc8748000-0xcc748000] (64MB) mapped at [ffff8800c8748000-ffff8800cc747fff]
[ 0.347204] bounce pool size: 64 pages
[ 0.347287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.347873] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.348058] NTFS driver 2.1.30 [Flags: R/W].
[ 0.348196] fuse init (API version 7.22)
[ 0.348343] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.349268] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.349653] NILFS version 2 loaded
[ 0.349809] bio: create slab <bio-1> at 1
[ 0.350004] Btrfs loaded
[ 0.350086] msgmni has been set to 32768
[ 0.350435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.350569] io scheduler noop registered
[ 0.350650] io scheduler deadline registered
[ 0.350748] io scheduler cfq registered (default)
[ 0.352266] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.352366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.352457] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.356830] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.357158] Linux agpgart interface v0.103
[ 0.357246] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 0.357382] Hangcheck: Using getrawmonotonic().
[ 0.357489] intel_idle: MWAIT substates: 0x42120
[ 0.357490] intel_idle: v0.4 model 0x3C
[ 0.357490] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.357535] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.357671] ACPI: Power Button [PWRB]
[ 0.357767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.357901] ACPI: Power Button [PWRF]
[ 0.358018] ACPI: Fan [FAN0] (off)
[ 0.358109] ACPI: Fan [FAN1] (off)
[ 0.358200] ACPI: Fan [FAN2] (off)
[ 0.358289] ACPI: Fan [FAN3] (off)
[ 0.358380] ACPI: Fan [FAN4] (off)
[ 0.358489] ACPI: Requesting acpi_cpufreq
[ 0.358867] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.358961] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.359175] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.359259] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.359363] [drm] Initialized drm 1.1.0 20060810
[ 0.359454] usbcore: registered new interface driver udl
[ 0.360055] brd: module loaded
[ 0.360378] loop: module loaded
[ 0.360477] Uniform Multi-Platform E-IDE driver
[ 0.360578] ide-gd driver 1.18
[ 0.360660] ide-cd driver 5.00
[ 0.360776] ahci 0000:00:1f.2: version 3.0
[ 0.360838] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.370908] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.371044] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.371179] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.381004] scsi0 : ahci
[ 0.381134] scsi1 : ahci
[ 0.381239] scsi2 : ahci
[ 0.381346] scsi3 : ahci
[ 0.381450] scsi4 : ahci
[ 0.381557] scsi5 : ahci
[ 0.381686] ata1: SATA max UDMA/133 abar m2048@0xf063a000 port 0xf063a100 irq 41
[ 0.381820] ata2: SATA max UDMA/133 abar m2048@0xf063a000 port 0xf063a180 irq 41
[ 0.381957] ata3: SATA max UDMA/133 abar m2048@0xf063a000 port 0xf063a200 irq 41
[ 0.382090] ata4: SATA max UDMA/133 abar m2048@0xf063a000 port 0xf063a280 irq 41
[ 0.382224] ata5: SATA max UDMA/133 abar m2048@0xf063a000 port 0xf063a300 irq 41
[ 0.382357] ata6: SATA max UDMA/133 abar m2048@0xf063a000 port 0xf063a380 irq 41
[ 0.382554] ahci 0000:04:00.0: irq 42 for MSI/MSI-X
[ 0.382581] ahci: SSS flag set, parallel bus scan disabled
[ 0.382708] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.382843] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
[ 0.383087] scsi6 : ahci
[ 0.383194] scsi7 : ahci
[ 0.383288] ata7: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400100 irq 42
[ 0.383423] ata8: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400180 irq 42
[ 0.383601] tun: Universal TUN/TAP device driver, 1.6
[ 0.383685] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.383785] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[ 0.383895] usbcore: registered new interface driver usb-storage
[ 0.383994] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.386339] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.386425] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.386546] mousedev: PS/2 mouse device common for all mice
[ 0.386688] I2O subsystem v1.325
[ 0.386769] i2o: max drivers = 8
[ 0.386900] I2O ProcFS OSM v1.316
[ 0.386992] rtc_cmos 00:05: RTC can wake from S4
[ 0.387157] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.387262] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.387398] i2c /dev entries driver
[ 0.387537] applesmc: supported laptop not found!
[ 0.387620] applesmc: driver init failed (ret=-19)!
[ 0.387835] pc87360: PC8736x not detected, module not inserted
[ 0.388010] md: raid0 personality registered for level 0
[ 0.388094] md: raid1 personality registered for level 1
[ 0.388265] cpuidle: using governor ladder
[ 0.388461] cpuidle: using governor menu
[ 0.388549] sdhci: Secure Digital Host Controller Interface driver
[ 0.388634] sdhci: Copyright(c) Pierre Ossman
[ 0.388722] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 0.388806] wbsd: Copyright(c) Pierre Ossman
[ 0.388905] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 0.389000] usbcore: registered new interface driver vub300
[ 0.389162] usbcore: registered new interface driver ushc
[ 0.389246] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.389336] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.389491] usbcore: registered new interface driver usbhid
[ 0.389575] usbhid: USB HID core driver
[ 0.389727] ashmem: initialized
[ 0.389828] logger: created 256K log 'log_main'
[ 0.389936] logger: created 256K log 'log_events'
[ 0.390039] logger: created 256K log 'log_radio'
[ 0.390140] logger: created 256K log 'log_system'
[ 0.390226] hdaps: supported laptop not found!
[ 0.390309] hdaps: driver init failed (ret=-19)!
[ 0.390507] Netfilter messages via NETLINK v0.30.
[ 0.390597] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.390735] ctnetlink v0.93: registering with nfnetlink.
[ 0.390820] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 0.390913] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 0.391021] ipip: IPv4 over IPv4 tunneling driver
[ 0.391176] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.391282] arp_tables: (C) 2002 David S. Miller
[ 0.391372] TCP: cubic registered
[ 0.391454] NET: Registered protocol family 17
[ 0.391560] Bridge firewalling registered
[ 0.391644] Ebtables v2.0 registered
[ 0.391733] 8021q: 802.1Q VLAN Support v1.8
[ 0.686420] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.686519] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.686620] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.686718] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.686816] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.686914] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.687153] ata2.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 0.687245] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.687416] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.687451] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
[ 0.687452] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.687690] ata2.00: configured for UDMA/133
[ 0.687876] ata1.00: configured for UDMA/133
[ 0.688387] ata4.00: HPA detected: current 1953523055, native 1953525168
[ 0.688476] ata4.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 0.688564] ata4.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.688691] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 0.688916] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bd1d308), AE_NOT_FOUND (20130517/psparse-536)
[ 0.689182] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 0.690807] ata4.00: configured for UDMA/133
[ 0.691170] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 0.691399] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bd1d308), AE_NOT_FOUND (20130517/psparse-536)
[ 0.691662] ata3.00: configured for UDMA/100
[ 1.345352] tsc: Refined TSC clocksource calibration: 3501.307 MHz
[ 2.343850] Switched to clocksource tsc
[ 3.370170] floppy0: no floppy controllers found
[ 3.370387] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
[ 3.370599] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.370616] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.370753] sd 0:0:0:0: [sda] Write Protect is off
[ 3.370754] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.370795] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.371129] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 3.371343] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.371358] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 3.371471] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.371472] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.371516] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.371795] sda: sda1 sda2
[ 3.372198] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.372794] sdb: sdb1
[ 3.372961] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 3.373121] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.375064] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.375200] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.375343] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.375389] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 3.375554] scsi 3:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 3.375753] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.375766] sd 3:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.375844] sd 3:0:0:0: [sdc] Write Protect is off
[ 3.375845] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.375878] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.438492] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 >
[ 3.439020] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 3.681674] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.681806] registered taskstats version 1
[ 3.682212] rtc_cmos 00:05: setting system clock to 2013-10-24 05:22:17 UTC (1382592137)
[ 3.683261] ALSA device list:
[ 3.683341] No soundcards found.
[ 3.683435] md: Waiting for all devices to be available before autodetect
[ 3.683521] md: If you don't use raid, use raid=noautodetect
[ 3.683669] md: Autodetecting RAID arrays.
[ 3.724220] md: Scanned 3 and added 3 devices.
[ 3.724304] md: autorun ...
[ 3.724384] md: considering sdc8 ...
[ 3.724467] md: adding sdc8 ...
[ 3.724548] md: sdc7 has different UUID to sdc8
[ 3.724634] md: sdc6 has different UUID to sdc8
[ 3.724793] md: created md127
[ 3.724876] md: bind<sdc8>
[ 3.724961] md: running: <sdc8>
[ 3.725286] md/raid1:md127: active with 1 out of 2 mirrors
[ 3.725380] md127: detected capacity change from 0 to 695924359168
[ 3.725469] md: considering sdc7 ...
[ 3.725551] md: adding sdc7 ...
[ 3.725637] md: sdc6 has different UUID to sdc7
[ 3.725785] md: created md123
[ 3.725867] md: bind<sdc7>
[ 3.725950] md: running: <sdc7>
[ 3.726252] md/raid1:md123: active with 1 out of 2 mirrors
[ 3.726344] md123: detected capacity change from 0 to 150004301824
[ 3.726440] md: considering sdc6 ...
[ 3.726521] md: adding sdc6 ...
[ 3.726650] md: created md122
[ 3.726729] md: bind<sdc6>
[ 3.726811] md: running: <sdc6>
[ 3.727046] md/raid1:md122: active with 1 out of 2 mirrors
[ 3.727138] md122: detected capacity change from 0 to 150004301824
[ 3.727226] md: ... autorun DONE.
[ 3.729041] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 3.729781] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (244)
[ 3.733781] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.733868] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.798193] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 3.798304] EXT4-fs (sda2): 5 orphan inodes deleted
[ 3.798387] EXT4-fs (sda2): recovery complete
[ 3.806432] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.806573] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 3.809043] devtmpfs: mounted
[ 3.809240] Freeing unused kernel memory: 932K (ffffffff81afe000 - ffffffff81be7000)
[ 4.148402] systemd-udevd[266]: starting version 204
[ 4.203298] pps_core: LinuxPPS API ver. 1 registered
[ 4.203300] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.203495] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 4.203499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.203592] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.203869] ehci-pci: EHCI PCI platform driver
[ 4.203903] PTP clock support registered
[ 4.203938] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 4.203943] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 4.203947] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.203955] ehci-pci 0000:00:1a.0: debug port 2
[ 4.207838] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 4.207850] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf063c000
[ 4.213807] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.213817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.213818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.213819] usb usb1: Product: EHCI Host Controller
[ 4.213820] usb usb1: Manufacturer: Linux 3.11.3-gentoo ehci_hcd
[ 4.213821] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.213889] hub 1-0:1.0: USB hub found
[ 4.213892] hub 1-0:1.0: 2 ports detected
[ 4.214034] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 4.214038] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.214042] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.214051] ehci-pci 0000:00:1d.0: debug port 2
[ 4.214481] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 4.214482] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 4.217954] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.217966] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063b000
[ 4.223789] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.223800] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.223801] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.223803] usb usb2: Product: EHCI Host Controller
[ 4.223804] usb usb2: Manufacturer: Linux 3.11.3-gentoo ehci_hcd
[ 4.223805] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.223875] hub 2-0:1.0: USB hub found
[ 4.223876] hub 2-0:1.0: 2 ports detected
[ 4.224090] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0412 flags=need_gfx_hws,is_haswell,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_vebox_ring,has_llc,has_ddi,has_fpga_dbg,
[ 4.224387] [drm] Memory usable by graphics device = 2048M
[ 4.224389] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 4.224389] [drm:i915_gem_gtt_init], GTT stolen size = 256M
[ 4.224392] i915 0000:00:02.0: setting latency timer to 64
[ 4.240429] [drm:intel_detect_pch], Found LynxPoint PCH
[ 4.240550] [drm:intel_opregion_setup], graphic opregion physical addr: 0xccafc018
[ 4.240554] [drm:intel_opregion_setup], Public ACPI methods supported
[ 4.240555] [drm:intel_opregion_setup], SWSCI supported
[ 4.240555] [drm:intel_opregion_setup], ASLE supported
[ 4.240587] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 4.240592] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.240593] [drm] Driver supports precise vblank timestamp query.
[ 4.240594] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 4.240595] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL d
[ 4.240596] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 4.240597] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 4.240599] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 4.240600] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 4.240601] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
[ 4.240602] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 4.240603] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 4.240604] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 4.240608] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 4.240610] [drm:i915_gem_init_stolen], found 268435456 bytes of stolen memory at cf200000
[ 4.240632] [drm:intel_modeset_init], 3 display pipes available.
[ 4.240639] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz
[ 4.240640] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
[ 4.240642] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.240959] [drm:intel_dp_init_connector], Adding DP connector on port B
[ 4.240979] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 4.243816] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 4.243820] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 4.244037] md122: unknown partition table
[ 4.246275] md123: unknown partition table
[ 4.246625] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 4.246629] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 4.246667] [drm:intel_dp_init_connector], Adding DP connector on port C
[ 4.246677] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[ 4.246884] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[ 4.247088] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[ 4.247125] [drm:intel_dp_init_connector], Adding DP connector on port D
[ 4.247132] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 4.248606] md127: unknown partition table
[ 4.249946] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 4.249949] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 4.252760] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 4.252764] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 4.322658] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
[ 4.323703] [drm:init_status_page], render ring hws offset: 0x00000000
[ 4.325692] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
[ 4.325700] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 4.325748] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 4.325792] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
[ 4.325860] [drm:create_default_context], Default HW context loaded
[ 4.325860] [drm:i915_gem_context_init], HW context support initialized
[ 4.325879] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode
[ 4.325886] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode
[ 4.325893] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode
[ 4.325899] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode
[ 4.325906] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode
[ 4.325938] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[ 4.325940] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[ 4.325941] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
[ 4.325942] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port C using clock 0x00000000
[ 4.325944] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
[ 4.325945] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
[ 4.325947] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: enabled, pipe=0
[ 4.325948] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
[ 4.325949] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
[ 4.325950] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:DP-1] hw state readout: disabled
[ 4.325951] [drm:intel_modeset_readout_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled
[ 4.325952] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:DP-2] hw state readout: enabled
[ 4.325954] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled
[ 4.325955] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-3] hw state readout: disabled
[ 4.325956] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-3] hw state readout: disabled
[ 4.325957] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 4.325958] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 4.325959] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 4.325960] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.325961] [drm:intel_dump_pipe_config], requested mode:
[ 4.325962] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
[ 4.325963] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.325964] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
[ 4.325965] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.325966] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x028001e0
[ 4.325966] [drm:intel_dump_pipe_config], ips: 0
[ 4.325968] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[ 4.325968] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 4.325969] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 4.325970] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.325971] [drm:intel_dump_pipe_config], requested mode:
[ 4.325971] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.325972] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.325973] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.325974] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.325975] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 4.325975] [drm:intel_dump_pipe_config], ips: 0
[ 4.325976] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
[ 4.325977] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 4.325978] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 4.325978] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.325979] [drm:intel_dump_pipe_config], requested mode:
[ 4.325980] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.325981] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.325981] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.325982] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.325983] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 4.325984] [drm:intel_dump_pipe_config], ips: 0
[ 4.325986] [drm:intel_connector_check_state], [CONNECTOR:17:DP-2]
[ 4.325987] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 4.325988] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 4.325989] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 4.325990] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 4.325991] [drm:check_crtc_state], [CRTC:3]
[ 4.325994] [drm:check_crtc_state], [CRTC:5]
[ 4.325995] [drm:check_crtc_state], [CRTC:7]
[ 4.325999] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 4.326005] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector VGA-1 1920x1200@60Hz
[ 4.326006] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-1 1920x1200@60Hz
[ 4.326007] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-1 1920x1200@60Hz
[ 4.326008] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-2 1920x1200@60Hz
[ 4.326009] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-2 1920x1200@60Hz
[ 4.326010] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector DP-3 1920x1200@60Hz
[ 4.326011] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector HDMI-A-3 1920x1200@60Hz
[ 4.326013] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[ 4.326015] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[ 4.335626] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 4.335628] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4.335779] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4.335781] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4.335782] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4.335783] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4.336101] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4.336102] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4.336103] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4.336104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
[ 4.336105] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
[ 4.338980] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 4.343483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 4.347455] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 4.348589] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
[ 4.348591] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 4.373771] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 4.373776] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes :
[ 4.373777] [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 4.373779] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[ 4.373781] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 4.373782] [drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
[ 4.373784] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 4.373786] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 4.373788] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 4.373790] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
[ 4.373791] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4.373793] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4.373795] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4.373797] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
[ 4.374083] [drm:intel_dp_get_dpcd], DPCD: 12 14 e4 01 01 01 01 81 00 00 00 00 00 00 00
[ 4.375459] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 4.375640] [drm:intel_dp_probe_oui], Sink OUI: 0080e1
[ 4.375820] [drm:intel_dp_probe_oui], Branch OUI: 0080e1
[ 4.376905] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 4.408294] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 4.439621] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 4.439624] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 4.440715] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 4.472225] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 4.502494] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 4.502535] [drm:drm_edid_to_eld], ELD monitor DELL U3014
[ 4.502536] [drm:drm_edid_to_eld], ELD size 9, SAD count 1
[ 4.502554] [drm:drm_mode_debug_printmodeline], Modeline 59:"1440x480i" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[ 4.502556] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3
[ 4.502557] [drm:drm_mode_debug_printmodeline], Modeline 60:"1440x576i" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
[ 4.502559] [drm:drm_mode_prune_invalid], Not using 1440x576i mode 3
[ 4.502560] [drm:drm_mode_debug_printmodeline], Modeline 79:"1440x480i" 60 27027 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[ 4.502562] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3
[ 4.502566] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] probed modes :
[ 4.502567] [drm:drm_mode_debug_printmodeline], Modeline 35:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9
[ 4.502569] [drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 4.502570] [drm:drm_mode_debug_printmodeline], Modeline 36:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 4.502572] [drm:drm_mode_debug_printmodeline], Modeline 70:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 4.502574] [drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[ 4.502576] [drm:drm_mode_debug_printmodeline], Modeline 71:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[ 4.502578] [drm:drm_mode_debug_printmodeline], Modeline 68:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
[ 4.502579] [drm:drm_mode_debug_printmodeline], Modeline 67:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
[ 4.502581] [drm:drm_mode_debug_printmodeline], Modeline 69:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[ 4.502583] [drm:drm_mode_debug_printmodeline], Modeline 82:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[ 4.502585] [drm:drm_mode_debug_printmodeline], Modeline 44:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 4.502586] [drm:drm_mode_debug_printmodeline], Modeline 41:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[ 4.502588] [drm:drm_mode_debug_printmodeline], Modeline 50:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 4.502590] [drm:drm_mode_debug_printmodeline], Modeline 45:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 4.502592] [drm:drm_mode_debug_printmodeline], Modeline 40:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[ 4.502593] [drm:drm_mode_debug_printmodeline], Modeline 43:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 4.502595] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 4.502597] [drm:drm_mode_debug_printmodeline], Modeline 72:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 4.502599] [drm:drm_mode_debug_printmodeline], Modeline 66:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[ 4.502600] [drm:drm_mode_debug_printmodeline], Modeline 51:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 4.502602] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4.502604] [drm:drm_mode_debug_printmodeline], Modeline 53:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 4.502606] [drm:drm_mode_debug_printmodeline], Modeline 46:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4.502607] [drm:drm_mode_debug_printmodeline], Modeline 63:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
[ 4.502609] [drm:drm_mode_debug_printmodeline], Modeline 39:"720x480" 60 27030 720 736 798 858 480 489 495 525 0x40 0xa
[ 4.502611] [drm:drm_mode_debug_printmodeline], Modeline 77:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
[ 4.502613] [drm:drm_mode_debug_printmodeline], Modeline 57:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[ 4.502614] [drm:drm_mode_debug_printmodeline], Modeline 47:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 4.502616] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4.502618] [drm:drm_mode_debug_printmodeline], Modeline 61:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[ 4.502619] [drm:drm_mode_debug_printmodeline], Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4.502622] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
[ 4.502773] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 4.502775] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 4.502776] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
[ 4.502777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-3]
[ 4.502779] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-3] disconnected
[ 4.502780] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-3]
[ 4.502928] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 4.502929] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 4.502930] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-3] disconnected
[ 4.502931] [drm:drm_setup_crtcs],
[ 4.502932] [drm:drm_enable_connectors], connector 9 enabled? no
[ 4.502933] [drm:drm_enable_connectors], connector 12 enabled? no
[ 4.502934] [drm:drm_enable_connectors], connector 15 enabled? yes
[ 4.502936] [drm:drm_enable_connectors], connector 17 enabled? yes
[ 4.502936] [drm:drm_enable_connectors], connector 18 enabled? no
[ 4.502937] [drm:drm_enable_connectors], connector 20 enabled? no
[ 4.502938] [drm:drm_enable_connectors], connector 21 enabled? no
[ 4.502939] [drm:drm_target_preferred], looking for cmdline mode on connector 15
[ 4.502941] [drm:drm_target_preferred], found mode 1920x1200
[ 4.502946] [drm:drm_target_preferred], looking for cmdline mode on connector 17
[ 4.502947] [drm:drm_target_preferred], found mode 1920x1200
[ 4.502948] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 4.502953] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3
[ 4.502954] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 5
[ 4.502956] [drm:i915_gem_object_create_stolen], creating stolen object: size=8ca000
[ 4.502958] [drm:i915_pages_create_for_stolen], offset=0x0, size=9216000
[ 4.504082] [drm:intelfb_create], allocated 1920x1200 fb: 0x000a1000, bo ffff8807fda4be40
[ 4.504115] fbcon: inteldrmfb (fb0) is primary device
[ 4.505018] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 4.505019] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 4.505020] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 4.505021] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.505023] [drm:drm_mode_debug_printmodeline], Modeline 54:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 4.505023] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 4.505024] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [NOCRTC]
[ 4.505025] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 4.505026] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 4.505026] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 4.505027] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 4.505028] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 4.505030] [drm:connected_sink_compute_bpp], [CONNECTOR:15:HDMI-A-1] checking for sink bpp constrains
[ 4.505031] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
[ 4.505032] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
[ 4.505033] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 4.505034] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 4.505034] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 4.505035] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 4.505036] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.505036] [drm:intel_dump_pipe_config], requested mode:
[ 4.505038] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 4.505038] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.505040] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 4.505041] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.505041] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 4.505042] [drm:intel_dump_pipe_config], ips: 0
[ 4.516338] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.518345] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe A
[ 4.518891] [drm:intel_ddi_calculate_wrpll], WRPLL: 154000000Hz refresh rate with p=6, n2=53 r2=31
[ 4.518920] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
[ 4.518924] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1920x1200]
[ 4.518924] [drm:intel_ddi_mode_set], Preparing DDI mode on port B, pipe A
[ 4.570279] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 4.623205] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 4.625170] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1]
[ 4.625172] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 4.625174] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 4.625175] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 4.625176] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 4.625177] [drm:check_crtc_state], [CRTC:3]
[ 4.625180] [drm:check_crtc_state], [CRTC:5]
[ 4.625181] [drm:check_crtc_state], [CRTC:7]
[ 4.625184] [drm:intel_crtc_set_config], [CRTC:5] [FB:56] #connectors=1 (x y) (0 0)
[ 4.625185] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 4.625186] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 4.625187] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.625189] [drm:drm_mode_debug_printmodeline], Modeline 55:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 4.625189] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 4.625190] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 4.625191] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 4.625191] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 4.625192] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 4.625194] [drm:connected_sink_compute_bpp], [CONNECTOR:17:DP-2] checking for sink bpp constrains
[ 4.625195] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 193250KHz
[ 4.625197] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[ 4.625198] [drm:intel_dp_compute_config], DP link bw required 463800 available 518400
[ 4.625199] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 4.625199] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 4.625200] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 4.625200] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 4.625201] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.625202] [drm:intel_dump_pipe_config], requested mode:
[ 4.625203] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 4.625203] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.625204] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 4.625205] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.625205] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 4.625206] [drm:intel_dump_pipe_config], ips: 0
[ 4.625217] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
[ 4.625222] [drm:intel_crtc_mode_set], [ENCODER:16:TMDS-16] set [MODE:0:1920x1200]
[ 4.625223] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
[ 4.625223] [drm:intel_ddi_mode_set], DP audio on pipe B on DDI
[ 4.625223] [drm:intel_ddi_mode_set], DP audio: write eld information
[ 4.625224] [drm:intel_write_eld], ELD on [CONNECTOR:17:DP-2], [ENCODER:16:TMDS-16]
[ 4.625225] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
[ 4.625225] [drm:haswell_write_eld], HDMI audio: enable codec
[ 4.632478] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 4.632478] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.632615] hub 1-1:1.0: USB hub found
[ 4.632722] hub 1-1:1.0: 6 ports detected
[ 4.677091] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 4.677092] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 40
[ 4.677093] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 50
[ 4.677094] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60
[ 4.677095] [drm:haswell_write_eld], ELD on pipe B
[ 4.677095] [drm:haswell_write_eld], ELD: DisplayPort detected
[ 4.677098] [drm:haswell_write_eld], port num:0
[ 4.677098] [drm:haswell_write_eld], ELD size 9
[ 4.678147] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 4.679394] [drm:intel_dp_start_link_train], clock recovery OK
[ 4.679394] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 4.682072] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 4.724010] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1]
[ 4.724011] [drm:intel_connector_check_state], [CONNECTOR:17:DP-2]
[ 4.724013] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 4.724014] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 4.724015] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 4.724016] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 4.724017] [drm:check_crtc_state], [CRTC:3]
[ 4.724019] [drm:check_crtc_state], [CRTC:5]
[ 4.724022] [drm:check_crtc_state], [CRTC:7]
[ 4.724023] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 4.724025] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 4.724025] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 4.724045] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 4.724046] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 4.724046] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 4.724047] [drm:intel_crtc_set_config], [CRTC:5] [FB:56] #connectors=1 (x y) (0 0)
[ 4.724048] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 4.724048] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 4.727433] Console: switching to colour frame buffer device 240x75
[ 4.727446] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 4.727447] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 4.727448] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 4.727448] [drm:intel_crtc_set_config], [CRTC:5] [FB:56] #connectors=1 (x y) (0 0)
[ 4.727449] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 4.727449] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 4.730830] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.730831] i915 0000:00:02.0: registered panic notifier
[ 4.735011] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.737045] [drm:asle_set_backlight], bclp = 0x80000002
[ 4.737048] [drm:intel_panel_get_max_backlight], max backlight PWM = 0
[ 4.737088] [drm:asle_set_backlight], bclp = 0x800000ff
[ 4.737089] [drm:intel_panel_get_max_backlight], max backlight PWM = 0
[ 4.737120] acpi device:59: registered as cooling_device13
[ 4.737138] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.737157] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 4.737191] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.737274] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.737314] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.737325] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 4.850120] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 4.850123] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.850258] hub 2-1:1.0: USB hub found
[ 4.850367] hub 2-1:1.0: 8 ports detected
[ 4.887536] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 4.887538] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d0:2b:9c:94:20
[ 4.887539] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.887563] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 4.896759] systemd-udevd[286]: renamed network interface eth0 to eno1
[ 5.124456] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 5.211318] usb 2-1.3: New USB device found, idVendor=174c, idProduct=2074
[ 5.211321] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 5.211323] usb 2-1.3: Product: ASM107x
[ 5.211325] usb 2-1.3: Manufacturer: Asmedia
[ 5.211326] usb 2-1.3: SerialNumber: 00000000A001
[ 5.211594] hub 2-1.3:1.0: USB hub found
[ 5.211815] hub 2-1.3:1.0: 4 ports detected
[ 5.285199] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[ 5.371687] usb 2-1.4: string descriptor 0 read error: -22
[ 5.371691] usb 2-1.4: New USB device found, idVendor=0b05, idProduct=17d0
[ 5.371693] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.444946] usb 2-1.7: new high-speed USB device number 5 using ehci-pci
[ 5.533682] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0723
[ 5.533685] usb 2-1.7: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 5.533687] usb 2-1.7: Product: USB Storage
[ 5.533688] usb 2-1.7: Manufacturer: Generic
[ 5.534322] usb-storage 2-1.7:1.0: USB Mass Storage device detected
[ 5.534380] usb-storage 2-1.7:1.0: Quirks match for vid 05e3 pid 0723: 8000
[ 5.534438] scsi8 : usb-storage 2-1.7:1.0
[ 5.614803] usb 2-1.3.2: new high-speed USB device number 6 using ehci-pci
[ 5.707265] usb 2-1.3.2: New USB device found, idVendor=0451, idProduct=8043
[ 5.707268] usb 2-1.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.707270] usb 2-1.3.2: SerialNumber: 07030849BFB9
[ 5.707431] hub 2-1.3.2:1.0: USB hub found
[ 5.707519] hub 2-1.3.2:1.0: 3 ports detected
[ 5.710512] [drm:intel_enable_rc6], Haswell: only RC6 available
[ 5.710520] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.710536] [drm:gen6_enable_rps], Overclocking supported. Max: 1200MHz, Overclock max: 1300MHz
[ 5.980085] usb 2-1.3.2.1: new full-speed USB device number 7 using ehci-pci
[ 6.068943] usb 2-1.3.2.1: New USB device found, idVendor=046d, idProduct=c068
[ 6.068945] usb 2-1.3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.068946] usb 2-1.3.2.1: Product: G500
[ 6.068947] usb 2-1.3.2.1: Manufacturer: Logitech
[ 6.068948] usb 2-1.3.2.1: SerialNumber: 143DD65CE20018
[ 6.071272] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2.1/2-1.3.2.1:1.0/input/input3
[ 6.071335] hid-generic 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.3.2.1/input0
[ 6.075109] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2.1/2-1.3.2.1:1.1/input/input4
[ 6.075224] hid-generic 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.3.2.1/input1
[ 6.147826] usb 2-1.3.2.2: new low-speed USB device number 8 using ehci-pci
[ 6.254906] usb 2-1.3.2.2: New USB device found, idVendor=045e, idProduct=00db
[ 6.254908] usb 2-1.3.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.254909] usb 2-1.3.2.2: Product: Natural® Ergonomic Keyboard 4000
[ 6.254910] usb 2-1.3.2.2: Manufacturer: Microsoft
[ 6.262602] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2.2/2-1.3.2.2:1.0/input/input5
[ 6.262691] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.3.2.2/input0
[ 6.273800] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2.2/2-1.3.2.2:1.1/input/input6
[ 6.273889] microsoft 0003:045E:00DB.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1.3.2.2/input1
[ 6.346512] usb 2-1.3.2.3: new high-speed USB device number 9 using ehci-pci
[ 6.432117] usb 2-1.3.2.3: New USB device found, idVendor=0451, idProduct=8043
[ 6.432119] usb 2-1.3.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 6.432120] usb 2-1.3.2.3: SerialNumber: 89030869BFB9
[ 6.432269] hub 2-1.3.2.3:1.0: USB hub found
[ 6.432368] hub 2-1.3.2.3:1.0: 3 ports detected
[ 6.534471] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
[ 6.534562] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 6.537461] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 6.704948] usb 2-1.3.2.3.3: new high-speed USB device number 10 using ehci-pci
[ 6.889154] usb 2-1.3.2.3.3: New USB device found, idVendor=0bda, idProduct=0307
[ 6.889156] usb 2-1.3.2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.889158] usb 2-1.3.2.3.3: Product: USB3.0 Card Reader
[ 6.889159] usb 2-1.3.2.3.3: Manufacturer: Realtek
[ 6.889160] usb 2-1.3.2.3.3: SerialNumber: 201006010301
[ 6.894161] usb-storage 2-1.3.2.3.3:1.0: USB Mass Storage device detected
[ 6.894233] scsi9 : usb-storage 2-1.3.2.3.3:1.0
[ 7.749145] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.809883] REISERFS (device md127): found reiserfs format "3.6" with standard journal
[ 7.809889] REISERFS (device md127): using ordered data mode
[ 7.809889] reiserfs: using flush barriers
[ 7.810506] REISERFS (device md127): journal params: device md127, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 7.810707] REISERFS (device md127): checking transaction log (md127)
[ 7.901190] scsi 9:0:0:0: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 4
[ 7.901322] sd 9:0:0:0: Attached scsi generic sg5 type 0
[ 7.906424] sd 9:0:0:0: [sde] Attached SCSI removable disk
[ 7.909426] REISERFS (device md127): Using r5 hash to sort names
[ 8.132596] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 8.132615] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 8.132618] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 8.132622] [drm:intel_crtc_set_config], [CRTC:5] [FB:56] #connectors=1 (x y) (0 0)
[ 8.132626] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 8.132628] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 8.659126] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 8.759733] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 12.410460] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 38.166573] PM: Syncing filesystems ... done.
[ 38.273817] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 38.274955] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 38.276127] Suspending console(s) (use no_console_suspend to debug)
[ 38.276340] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 38.276373] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 38.276392] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 38.277867] sd 0:0:0:0: [sda] Stopping disk
[ 38.278056] sd 1:0:0:0: [sdb] Stopping disk
[ 38.291097] sd 3:0:0:0: [sdc] Stopping disk
[ 38.299975] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
[ 39.145722] PM: suspend of devices complete after 870.845 msecs
[ 39.145817] PM: late suspend of devices complete after 0.094 msecs
[ 39.146031] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 39.156772] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 39.167658] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 39.178706] PM: noirq suspend of devices complete after 32.939 msecs
[ 39.179295] ACPI: Preparing to enter system sleep state S3
[ 39.179597] PM: Saving platform NVS memory
[ 39.182374] Disabling non-boot CPUs ...
[ 39.183564] smpboot: CPU 1 is now offline
[ 39.185001] smpboot: CPU 2 is now offline
[ 39.186460] smpboot: CPU 3 is now offline
[ 39.187784] smpboot: CPU 4 is now offline
[ 39.189231] smpboot: CPU 5 is now offline
[ 39.190456] smpboot: CPU 6 is now offline
[ 39.191711] smpboot: CPU 7 is now offline
[ 39.192856] ACPI: Low-level resume complete
[ 39.192887] PM: Restoring platform NVS memory
[ 39.193638] Enabling non-boot CPUs ...
[ 39.193720] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 39.207712] CPU1 is up
[ 39.207755] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 39.221845] CPU2 is up
[ 39.221893] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 39.235974] CPU3 is up
[ 39.236021] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 39.250015] CPU4 is up
[ 39.250065] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 39.264142] CPU5 is up
[ 39.264203] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 39.278323] CPU6 is up
[ 39.278378] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 39.292438] CPU7 is up
[ 39.299252] ACPI: Waking up from system sleep state S3
[ 39.332134] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 39.343112] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 39.365174] PM: noirq resume of devices complete after 65.731 msecs
[ 39.365234] PM: early resume of devices complete after 0.046 msecs
[ 39.365246] i915 0000:00:02.0: setting latency timer to 64
[ 39.365251] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 39.365257] e1000e 0000:00:19.0: setting latency timer to 64
[ 39.365265] ahci 0000:00:1f.2: setting latency timer to 64
[ 39.365290] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 39.365304] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 39.365310] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
[ 39.365310] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
[ 39.365331] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 39.365336] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
[ 39.365336] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
[ 39.366127] [drm:i915_redisable_vga], Something enabled VGA plane, disabling it
[ 39.366442] [drm:intel_opregion_setup], graphic opregion physical addr: 0xccafc018
[ 39.366449] [drm:intel_opregion_setup], Public ACPI methods supported
[ 39.366449] [drm:intel_opregion_setup], SWSCI supported
[ 39.366449] [drm:intel_opregion_setup], ASLE supported
[ 39.404149] [drm:init_status_page], render ring hws offset: 0x00000000
[ 39.406086] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
[ 39.406098] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 39.406239] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 39.406368] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
[ 39.406572] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode
[ 39.406583] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode
[ 39.406594] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode
[ 39.406605] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode
[ 39.406617] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode
[ 39.406662] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[ 39.406665] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[ 39.406668] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
[ 39.406673] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
[ 39.406677] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
[ 39.406680] [drm:intel_modeset_readout_hw_state], [ENCODER:16:TMDS-16] hw state readout: disabled, pipe=0
[ 39.406682] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
[ 39.406686] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
[ 39.406690] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:DP-1] hw state readout: disabled
[ 39.406693] [drm:intel_modeset_readout_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled
[ 39.406696] [drm:intel_modeset_readout_hw_state], [CONNECTOR:17:DP-2] hw state readout: disabled
[ 39.406699] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-2] hw state readout: disabled
[ 39.406701] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-3] hw state readout: disabled
[ 39.406704] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-3] hw state readout: disabled
[ 39.406708] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 39.406710] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 39.406713] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 39.406716] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406718] [drm:intel_dump_pipe_config], requested mode:
[ 39.406723] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 39.406724] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406728] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 39.406732] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406734] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 39.406735] [drm:intel_dump_pipe_config], ips: 0
[ 39.406739] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[ 39.406740] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 39.406742] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 39.406745] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406747] [drm:intel_dump_pipe_config], requested mode:
[ 39.406750] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 39.406752] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406756] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 39.406758] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406760] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 39.406762] [drm:intel_dump_pipe_config], ips: 0
[ 39.406765] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
[ 39.406766] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 39.406768] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 39.406771] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406773] [drm:intel_dump_pipe_config], requested mode:
[ 39.406776] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 39.406778] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406781] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 39.406784] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406786] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 39.406787] [drm:intel_dump_pipe_config], ips: 0
[ 39.406791] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 39.406796] [drm:connected_sink_compute_bpp], [CONNECTOR:15:HDMI-A-1] checking for sink bpp constrains
[ 39.406799] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
[ 39.406801] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
[ 39.406804] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 39.406807] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 39.406808] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 39.406810] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 39.406813] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.406815] [drm:intel_dump_pipe_config], requested mode:
[ 39.406820] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 39.406821] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.406825] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 39.406828] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.406830] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 39.406832] [drm:intel_dump_pipe_config], ips: 0
[ 39.406838] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 1
[ 39.406839] ------------[ cut here ]------------
[ 39.406861] WARNING: CPU: 1 PID: 1591 at drivers/gpu/drm/i915/intel_ddi.c:383 intel_ddi_put_crtc_pll+0x272/0x280 [i915]()
[ 39.406869] Modules linked in: e1000e i915 ptp ehci_pci ehci_hcd i2c_i801 pps_core
[ 39.406873] CPU: 1 PID: 1591 Comm: kworker/u16:21 Not tainted 3.11.3-gentoo #1
[ 39.406875] Hardware name: ASUS All Series/Z87-PRO, BIOS 0801 04/19/2013
[ 39.406883] Workqueue: events_unbound async_run_entry_fn
[ 39.406887] 0000000000000009 ffff8807fa6119f0 ffffffff817e25b6 0000000000000000
[ 39.406891] ffff8807fa611a28 ffffffff8103f223 ffff8807fb5b0000 ffff8807fe726000
[ 39.406894] 0000000000025990 0000000000000000 ffff8807fb72a000 ffff8807fa611a38
[ 39.406895] Call Trace:
[ 39.406903] [<ffffffff817e25b6>] dump_stack+0x45/0x56
[ 39.406909] [<ffffffff8103f223>] warn_slowpath_common+0x73/0x90
[ 39.406914] [<ffffffff8103f2f5>] warn_slowpath_null+0x15/0x20
[ 39.406927] [<ffffffffa006bb42>] intel_ddi_put_crtc_pll+0x272/0x280 [i915]
[ 39.406938] [<ffffffffa006bb94>] intel_ddi_pll_mode_set+0x44/0x8a0 [i915]
[ 39.406943] [<ffffffff814ef03c>] ? drm_vblank_get+0x6c/0x2c0
[ 39.406952] [<ffffffffa0039cd7>] ? i915_read32+0x57/0xd0 [i915]
[ 39.406967] [<ffffffffa006088a>] haswell_crtc_mode_set+0x3a/0x320 [i915]
[ 39.406996] [<ffffffffa0061a60>] __intel_set_mode+0x5b0/0x12f0 [i915]
[ 39.407010] [<ffffffffa00671a5>] intel_modeset_setup_hw_state+0x755/0xa40 [i915]
[ 39.407018] [<ffffffff817e4a2d>] ? mutex_lock+0xd/0x2a
[ 39.407026] [<ffffffffa0039247>] __i915_drm_thaw+0x117/0x1b0 [i915]
[ 39.407034] [<ffffffffa003966a>] i915_resume+0x6a/0xb0 [i915]
[ 39.407042] [<ffffffffa00396c1>] i915_pm_resume+0x11/0x20 [i915]
[ 39.407049] [<ffffffff8144e1ff>] pci_pm_resume+0x5f/0xb0
[ 39.407054] [<ffffffff8144e1a0>] ? pci_pm_restore+0xb0/0xb0
[ 39.407061] [<ffffffff8153c679>] dpm_run_callback.isra.12+0x19/0x50
[ 39.407066] [<ffffffff8153c73e>] device_resume+0x8e/0x130
[ 39.407071] [<ffffffff8153c7f8>] async_resume+0x18/0x40
[ 39.407075] [<ffffffff810617c2>] async_run_entry_fn+0x32/0x130
[ 39.407083] [<ffffffff81054c36>] process_one_work+0x146/0x3d0
[ 39.407088] [<ffffffff81055809>] worker_thread+0x119/0x390
[ 39.407093] [<ffffffff810556f0>] ? manage_workers.isra.24+0x2a0/0x2a0
[ 39.407098] [<ffffffff8105b42b>] kthread+0xbb/0xc0
[ 39.407102] [<ffffffff8105b370>] ? kthread_create_on_node+0x110/0x110
[ 39.407107] [<ffffffff817e8a6c>] ret_from_fork+0x7c/0xb0
[ 39.407111] [<ffffffff8105b370>] ? kthread_create_on_node+0x110/0x110
[ 39.407114] ---[ end trace 13d5f7e465dbce0f ]---
[ 39.407117] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe A
[ 39.409796] [drm:intel_ddi_calculate_wrpll], WRPLL: 154000000Hz refresh rate with p=6, n2=53 r2=31
[ 39.409835] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
[ 39.409850] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1920x1200]
[ 39.409853] [drm:intel_ddi_mode_set], Preparing DDI mode on port B, pipe A
[ 39.461955] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 39.513873] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 39.515875] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 39.515880] [drm:connected_sink_compute_bpp], [CONNECTOR:17:DP-2] checking for sink bpp constrains
[ 39.515885] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 193250KHz
[ 39.515895] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[ 39.515898] [drm:intel_dp_compute_config], DP link bw required 463800 available 518400
[ 39.515901] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 39.515904] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 39.515906] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 39.515908] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 39.515911] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 39.515913] [drm:intel_dump_pipe_config], requested mode:
[ 39.515918] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 39.515920] [drm:intel_dump_pipe_config], adjusted mode:
[ 39.515925] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 39.515927] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 39.515929] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 39.515931] [drm:intel_dump_pipe_config], ips: 0
[ 39.515956] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
[ 39.515968] [drm:intel_crtc_mode_set], [ENCODER:16:TMDS-16] set [MODE:0:1920x1200]
[ 39.515971] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
[ 39.515973] [drm:intel_ddi_mode_set], DP audio on pipe B on DDI
[ 39.515974] [drm:intel_ddi_mode_set], DP audio: write eld information
[ 39.515979] [drm:intel_write_eld], ELD on [CONNECTOR:17:DP-2], [ENCODER:16:TMDS-16]
[ 39.515981] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
[ 39.515983] [drm:haswell_write_eld], HDMI audio: enable codec
[ 39.567784] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 39.567790] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 40
[ 39.567795] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 50
[ 39.567798] [drm:haswell_write_eld], HDMI audio: audio conf: 0x 70fa60
[ 39.567802] [drm:haswell_write_eld], ELD on pipe B
[ 39.567805] [drm:haswell_write_eld], ELD: DisplayPort detected
[ 39.567812] [drm:haswell_write_eld], port num:0
[ 39.567814] [drm:haswell_write_eld], ELD size 9
[ 39.570850] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.575688] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.576902] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
[ 39.579733] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.585734] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.585745] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 39.588711] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.591827] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.591836] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 39.594808] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.597921] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.602645] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.648648] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[ 39.648660] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1]
[ 39.648664] [drm:intel_connector_check_state], [CONNECTOR:17:DP-2]
[ 39.648669] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 39.648673] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 39.648676] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 39.648679] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 39.648681] [drm:check_crtc_state], [CRTC:3]
[ 39.648688] [drm:check_crtc_state], [CRTC:5]
[ 39.648694] [drm:check_crtc_state], [CRTC:7]
[ 39.648700] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 39.648707] [drm:intel_resume_hotplug], running encoder hotplug functions
[ 39.651653] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.656519] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.660525] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.661588] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[ 39.669626] ata8: SATA link down (SStatus 0 SControl 300)
[ 39.669661] ata7: SATA link down (SStatus 0 SControl 300)
[ 39.671616] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 39.671619] [drm:intel_crt_detect], CRT not detected via hotplug
[ 39.671634] ata5: SATA link down (SStatus 0 SControl 300)
[ 39.671656] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 39.671814] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 39.671818] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 39.671820] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 39.671823] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 39.672153] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 39.672156] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 39.672158] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 39.672163] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from unknown to disconnected
[ 39.672971] ata2.00: configured for UDMA/133
[ 39.673038] sd 1:0:0:0: [sdb] Starting disk
[ 39.675109] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.675585] ata6: SATA link down (SStatus 0 SControl 300)
[ 39.675608] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 39.677386] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 39.677399] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bd1d308), AE_NOT_FOUND (20130517/psparse-536)
[ 39.679505] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.679566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 39.683483] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.684555] [drm:drm_helper_hpd_irq_event], [CONNECTOR:12:DP-1] status updated from unknown to disconnected
[ 39.697243] [drm:drm_helper_hpd_irq_event], [CONNECTOR:15:HDMI-A-1] status updated from unknown to connected
[ 39.697249] [drm:drm_helper_hpd_irq_event], [CONNECTOR:17:DP-2] status updated from unknown to disconnected
[ 39.697419] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 39.697422] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 39.697427] [drm:drm_helper_hpd_irq_event], [CONNECTOR:18:HDMI-A-2] status updated from unknown to disconnected
[ 39.697433] [drm:drm_helper_hpd_irq_event], [CONNECTOR:20:DP-3] status updated from unknown to disconnected
[ 39.697592] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 39.697595] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 39.697600] [drm:drm_helper_hpd_irq_event], [CONNECTOR:21:HDMI-A-3] status updated from unknown to disconnected
[ 39.697631] [drm:drm_fb_helper_hotplug_event],
[ 39.697636] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[ 39.697642] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 39.697645] [drm:intel_crt_detect], CRT not detected via hotplug
[ 39.697813] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 39.697816] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 39.697818] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 39.697820] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 39.698149] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 39.698151] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 39.698153] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 39.698156] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
[ 39.698160] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
[ 39.701085] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.705437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.709434] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 39.710507] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
[ 39.710511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 39.714802] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 39.714815] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88081bd1d308), AE_NOT_FOUND (20130517/psparse-536)
[ 39.714828] ata3.00: configured for UDMA/100
[ 39.734520] usb 2-1.4: reset full-speed USB device number 4 using ehci-pci
[ 39.735896] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 39.735916] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes :
[ 39.735925] [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 39.735933] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[ 39.735940] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 39.735947] [drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
[ 39.735954] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 39.735962] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 39.735970] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 39.735977] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
[ 39.735984] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 39.735991] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 39.735998] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 39.736003] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
[ 39.736010] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
[ 39.736024] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
[ 39.736192] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 39.736196] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 39.736200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
[ 39.736204] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-3]
[ 39.736209] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-3] disconnected
[ 39.736213] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-3]
[ 39.736372] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 39.736375] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 39.736379] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-3] disconnected
[ 39.736382] [drm:drm_setup_crtcs],
[ 39.736386] [drm:drm_enable_connectors], connector 9 enabled? no
[ 39.736390] [drm:drm_enable_connectors], connector 12 enabled? no
[ 39.736393] [drm:drm_enable_connectors], connector 15 enabled? yes
[ 39.736396] [drm:drm_enable_connectors], connector 17 enabled? no
[ 39.736399] [drm:drm_enable_connectors], connector 18 enabled? no
[ 39.736402] [drm:drm_enable_connectors], connector 20 enabled? no
[ 39.736405] [drm:drm_enable_connectors], connector 21 enabled? no
[ 39.736408] [drm:drm_target_preferred], looking for cmdline mode on connector 15
[ 39.736411] [drm:drm_target_preferred], found mode 1920x1200
[ 39.736415] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 39.736421] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3
[ 39.736429] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 39.736436] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 39.736440] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 39.736445] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 39.736450] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [NOCRTC]
[ 39.736461] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 39.736466] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 39.736469] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 39.736480] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[ 39.764504] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1]
[ 39.764509] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 39.764512] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 39.764515] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 39.764518] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 39.764520] [drm:check_crtc_state], [CRTC:3]
[ 39.764527] [drm:check_crtc_state], [CRTC:5]
[ 39.764529] [drm:check_crtc_state], [CRTC:7]
[ 39.764534] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 39.764539] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 39.767552] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 39.767557] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 39.782364] ata1.00: configured for UDMA/133
[ 39.782461] sd 0:0:0:0: [sda] Starting disk
[ 39.892256] usb 2-1.7: reset high-speed USB device number 5 using ehci-pci
[ 40.057124] usb 2-1.3.2: reset high-speed USB device number 6 using ehci-pci
[ 40.075365] [drm:i915_hotplug_work_func], running encoder hotplug functions
[ 40.075366] [drm:i915_hotplug_work_func], Connector DP-2 (pin 5) received hotplug event.
[ 40.075367] [drm:i915_hotplug_work_func], Connector HDMI-A-2 (pin 5) received hotplug event.
[ 40.075657] [drm:intel_dp_get_dpcd], DPCD: 12 14 e4 01 01 01 01 81 00 00 00 00 00 00 00
[ 40.077035] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.077215] [drm:intel_dp_probe_oui], Sink OUI: 0080e1
[ 40.077395] [drm:intel_dp_probe_oui], Branch OUI: 0080e1
[ 40.078478] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.108796] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.139028] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.139029] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 40.139030] [drm:intel_hpd_irq_event], [CONNECTOR:17:DP-2] status updated from 2 to 1
[ 40.139181] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 40.139182] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 40.139183] [drm:intel_hpd_irq_event], [CONNECTOR:18:HDMI-A-2] status updated from 2 to 2
[ 40.139189] [drm:drm_fb_helper_hotplug_event],
[ 40.139190] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[ 40.139192] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 40.139193] [drm:intel_crt_detect], CRT not detected via hotplug
[ 40.139349] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 40.139350] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 40.139350] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 40.139351] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 40.139668] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 40.139669] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 40.139669] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 40.139670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
[ 40.139671] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1]
[ 40.142542] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 40.146679] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 40.150676] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
[ 40.151800] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DP-1] disconnected
[ 40.151801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 40.177042] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 40.177046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] probed modes :
[ 40.177048] [drm:drm_mode_debug_printmodeline], Modeline 23:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[ 40.177050] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[ 40.177051] [drm:drm_mode_debug_printmodeline], Modeline 29:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 40.177053] [drm:drm_mode_debug_printmodeline], Modeline 30:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
[ 40.177055] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 40.177056] [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
[ 40.177058] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 40.177059] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x720" 60 74440 1280 1336 1472 1664 720 721 724 746 0x0 0x6
[ 40.177061] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 40.177062] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 40.177064] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 40.177065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
[ 40.177340] [drm:intel_dp_get_dpcd], DPCD: 12 14 e4 01 01 01 01 81 00 00 00 00 00 00 00
[ 40.178709] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.178888] [drm:intel_dp_probe_oui], Sink OUI: 0080e1
[ 40.179069] [drm:intel_dp_probe_oui], Branch OUI: 0080e1
[ 40.180149] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.210444] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.240679] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.240680] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 40.241761] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.272019] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.303527] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 40.303694] [drm:drm_edid_to_eld], ELD monitor DELL U3014
[ 40.303698] [drm:drm_edid_to_eld], ELD size 9, SAD count 1
[ 40.303786] [drm:drm_mode_debug_printmodeline], Modeline 36:"2560x1600" 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x48 0x9
[ 40.303789] [drm:drm_mode_prune_invalid], Not using 2560x1600 mode 12
[ 40.303797] [drm:drm_mode_debug_printmodeline], Modeline 61:"1440x480i" 0 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[ 40.303800] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3
[ 40.303808] [drm:drm_mode_debug_printmodeline], Modeline 62:"1440x576i" 0 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
[ 40.303811] [drm:drm_mode_prune_invalid], Not using 1440x576i mode 3
[ 40.303819] [drm:drm_mode_debug_printmodeline], Modeline 81:"1440x480i" 60 27027 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[ 40.303822] [drm:drm_mode_prune_invalid], Not using 1440x480i mode 3
[ 40.303836] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] probed modes :
[ 40.303843] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 40.303851] [drm:drm_mode_debug_printmodeline], Modeline 37:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 40.303858] [drm:drm_mode_debug_printmodeline], Modeline 72:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 40.303865] [drm:drm_mode_debug_printmodeline], Modeline 38:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[ 40.303872] [drm:drm_mode_debug_printmodeline], Modeline 73:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[ 40.303879] [drm:drm_mode_debug_printmodeline], Modeline 70:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
[ 40.303887] [drm:drm_mode_debug_printmodeline], Modeline 69:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
[ 40.303894] [drm:drm_mode_debug_printmodeline], Modeline 71:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[ 40.303901] [drm:drm_mode_debug_printmodeline], Modeline 84:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
[ 40.303908] [drm:drm_mode_debug_printmodeline], Modeline 45:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[ 40.303915] [drm:drm_mode_debug_printmodeline], Modeline 42:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[ 40.303923] [drm:drm_mode_debug_printmodeline], Modeline 51:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 40.303930] [drm:drm_mode_debug_printmodeline], Modeline 46:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 40.303937] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[ 40.303944] [drm:drm_mode_debug_printmodeline], Modeline 44:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 40.303951] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 40.303959] [drm:drm_mode_debug_printmodeline], Modeline 74:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 40.303966] [drm:drm_mode_debug_printmodeline], Modeline 68:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[ 40.303973] [drm:drm_mode_debug_printmodeline], Modeline 52:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 40.303980] [drm:drm_mode_debug_printmodeline], Modeline 53:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 40.303987] [drm:drm_mode_debug_printmodeline], Modeline 54:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 40.303994] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 40.304001] [drm:drm_mode_debug_printmodeline], Modeline 65:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
[ 40.304008] [drm:drm_mode_debug_printmodeline], Modeline 40:"720x480" 60 27030 720 736 798 858 480 489 495 525 0x40 0xa
[ 40.304015] [drm:drm_mode_debug_printmodeline], Modeline 79:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
[ 40.304023] [drm:drm_mode_debug_printmodeline], Modeline 59:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
[ 40.304030] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 40.304037] [drm:drm_mode_debug_printmodeline], Modeline 49:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 40.304044] [drm:drm_mode_debug_printmodeline], Modeline 63:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
[ 40.304051] [drm:drm_mode_debug_printmodeline], Modeline 50:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 40.304055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2]
[ 40.304221] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[ 40.304225] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
[ 40.304229] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-2] disconnected
[ 40.304233] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-3]
[ 40.304238] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-3] disconnected
[ 40.304242] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-3]
[ 40.304402] [drm:gmbus_xfer], GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
[ 40.304405] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpd
[ 40.304409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-3] disconnected
[ 40.304412] [drm:drm_setup_crtcs],
[ 40.304416] [drm:drm_enable_connectors], connector 9 enabled? no
[ 40.304420] [drm:drm_enable_connectors], connector 12 enabled? no
[ 40.304423] [drm:drm_enable_connectors], connector 15 enabled? yes
[ 40.304426] [drm:drm_enable_connectors], connector 17 enabled? yes
[ 40.304429] [drm:drm_enable_connectors], connector 18 enabled? no
[ 40.304432] [drm:drm_enable_connectors], connector 20 enabled? no
[ 40.304435] [drm:drm_enable_connectors], connector 21 enabled? no
[ 40.304438] [drm:drm_target_preferred], looking for cmdline mode on connector 15
[ 40.304441] [drm:drm_target_preferred], found mode 1920x1200
[ 40.304444] [drm:drm_target_preferred], looking for cmdline mode on connector 17
[ 40.304447] [drm:drm_target_preferred], found mode 1920x1200
[ 40.304451] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 40.304464] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3
[ 40.304468] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 5
[ 40.304474] [drm:intel_crtc_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 40.304481] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 40.304487] [drm:intel_crtc_set_config], [CRTC:5] [FB:56] #connectors=1 (x y) (0 0)
[ 40.304490] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 40.304494] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 40.304498] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 40.304502] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 40.304505] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 40.304510] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[ 40.304516] [drm:connected_sink_compute_bpp], [CONNECTOR:17:DP-2] checking for sink bpp constrains
[ 40.304520] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 193250KHz
[ 40.304531] [drm:intel_dp_compute_config], DP link bw 06 lane count 4 clock 162000 bpp 24
[ 40.304534] [drm:intel_dp_compute_config], DP link bw required 463800 available 518400
[ 40.304539] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 40.304543] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
[ 40.304546] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 40.304549] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 40.304554] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 40.304564] [drm:intel_dump_pipe_config], requested mode:
[ 40.304572] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 40.304574] [drm:intel_dump_pipe_config], adjusted mode:
[ 40.304582] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1200" 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6
[ 40.304586] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 40.304589] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
[ 40.304592] [drm:intel_dump_pipe_config], ips: 0
[ 40.304624] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
[ 40.304639] [drm:intel_crtc_mode_set], [ENCODER:16:TMDS-16] set [MODE:0:1920x1200]
[ 40.304643] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
[ 40.304645] [drm:intel_ddi_mode_set], DP audio on pipe B on DDI
[ 40.304648] [drm:intel_ddi_mode_set], DP audio: write eld information
[ 40.304654] [drm:intel_write_eld], ELD on [CONNECTOR:17:DP-2], [ENCODER:16:TMDS-16]
[ 40.304656] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
[ 40.304659] [drm:haswell_write_eld], HDMI audio: enable codec
[ 40.356519] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 40.356523] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x 40
[ 40.356526] [drm:haswell_write_eld], HDMI audio: eld vld status=0x 50
[ 40.356528] [drm:haswell_write_eld], HDMI audio: audio conf: 0x20800000
[ 40.356530] [drm:haswell_write_eld], ELD on pipe B
[ 40.356532] [drm:haswell_write_eld], ELD: DisplayPort detected
[ 40.357633] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 40.358954] [drm:intel_dp_start_link_train], clock recovery OK
[ 40.358957] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 40.362487] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 40.414436] [drm:intel_connector_check_state], [CONNECTOR:15:HDMI-A-1]
[ 40.414440] [drm:intel_connector_check_state], [CONNECTOR:17:DP-2]
[ 40.414446] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 40.414449] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 40.414452] [drm:check_encoder_state], [ENCODER:16:TMDS-16]
[ 40.414455] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
[ 40.414458] [drm:check_crtc_state], [CRTC:3]
[ 40.414464] [drm:check_crtc_state], [CRTC:5]
[ 40.414470] [drm:check_crtc_state], [CRTC:7]
[ 40.414475] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 40.414480] [drm:intel_modeset_stage_output_state], [CONNECTOR:15:HDMI-A-1] to [CRTC:3]
[ 40.414483] [drm:intel_modeset_stage_output_state], [CONNECTOR:17:DP-2] to [CRTC:5]
[ 40.424584] usb 2-1.3.2.1: reset full-speed USB device number 7 using ehci-pci
[ 40.665063] [drm:intel_enable_rc6], Haswell: only RC6 available
[ 40.665065] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 40.667036] [drm:gen6_enable_rps], Overclocking supported. Max: 1200MHz, Overclock max: 1300MHz
[ 40.761052] usb 2-1.3.2.2: reset low-speed USB device number 8 using ehci-pci
[ 41.102510] usb 2-1.3.2.3: reset high-speed USB device number 9 using ehci-pci
[ 41.462929] usb 2-1.3.2.3.3: reset high-speed USB device number 10 using ehci-pci
[ 42.479772] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 44.718673] ata4: link is slow to respond, please be patient (ready=0)
[ 48.130344] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 48.151280] ata4.00: configured for UDMA/133
[ 48.151405] sd 3:0:0:0: [sdc] Starting disk
[ 48.183748] PM: resume of devices complete after 8832.368 msecs
[ 48.340881] Restarting tasks ... done.
[ 48.341645] video LNXVIDEO:00: Restoring backlight state
^ permalink raw reply [flat|nested] 7+ messages in thread