From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753783Ab3KAUyd (ORCPT ); Fri, 1 Nov 2013 16:54:33 -0400 Received: from mms1.broadcom.com ([216.31.210.17]:3033 "EHLO mms1.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753446Ab3KAUyb (ORCPT ); Fri, 1 Nov 2013 16:54:31 -0400 X-Server-Uuid: 06151B78-6688-425E-9DE2-57CB27892261 Message-ID: <527414F2.7090402@broadcom.com> Date: Fri, 1 Nov 2013 21:54:10 +0100 From: "Arend van Spriel" User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.0 MIME-Version: 1.0 To: "Matt Porter" , "Felipe Balbi" , "Greg Kroah-Hartman" , "Kishon Vijay Abraham I" , "Rob Herring" , "Pawel Moll" , "Mark Rutland" , "Kumar Gala" , "Ian Campbell" , "Christian Daudt" , "Paul Zimmerman" cc: "Linux USB List" , "Linux ARM Kernel List" , "Linux Kernel Mailing List" , "Devicetree List" , "Linaro Patches" Subject: Re: [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding References: <1383335158-19730-1-git-send-email-matt.porter@linaro.org> <1383335158-19730-8-git-send-email-matt.porter@linaro.org> In-Reply-To: <1383335158-19730-8-git-send-email-matt.porter@linaro.org> X-WSS-ID: 7E6ACB781503931726-02-01 Content-Type: text/plain; charset=iso-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 11/01/2013 08:45 PM, Matt Porter wrote: > Add a binding that describes the Broadcom Kona USB2 PHY found > on the BCM281xx family of SoCs. > > Signed-off-by: Matt Porter > --- > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > new file mode 100644 > index 0000000..db309e2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > @@ -0,0 +1,15 @@ > +BROADCOM KONA USB2 PHY > + > +Required properties: > + - compatible: brcm,kona-usb2-phy > + - regs: offset and length of the PHY registers > + - #phy-cells: must be 0 > +Refer to phy/phy-bindings.txt for the generic PHY binding properties > + > +Example: > + > + usbphy: usbphy@3f130000 { > + compatible = "brcm,kona-usb2-phy"; > + reg = <0x3f130000 0x28>; I expect 'regs' iso 'reg' in this example. Regards, Arend > + #phy-cells = <0>; > + }; >