From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Johan Hovold <jhovold@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Andrew Victor <linux@maxim.org.za>,
Alessandro Zummo <a.zummo@towertech.it>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <rtc-linux@googlegroups.com>
Subject: Re: [PATCH v3 2/3] ARM: at91: fix hanged boot due to early rtt-interrupt
Date: Fri, 15 Nov 2013 12:10:45 +0100 [thread overview]
Message-ID: <52860135.3030409@atmel.com> (raw)
In-Reply-To: <1381917376-21107-3-git-send-email-jhovold@gmail.com>
On 16/10/2013 11:56, Johan Hovold :
> Make sure the RTT-interrupts are masked at boot by adding a new helper
> function to be used at SOC-init.
>
> This fixes hanged boot on all AT91 SOCs with an RTT, for example, if an
> RTT-alarm goes off after a non-clean shutdown (e.g. when using RTC
> wakeup).
>
> The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
> AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
> software reset. This means that their interrupts may be enabled during
> early boot if, for example, they where not disabled during a previous
> shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
> user reset). Furthermore, an RTC or RTT-alarm may also be active.
>
> The RTC and RTT-interrupts use the shared system-interrupt line, which
> is also used by the PIT, and if an interrupt occurs before a handler
> (e.g. RTC-driver) has been installed this leads to the system interrupt
> being disabled and prevents the system from booting.
>
> Note that when boot hangs due to an early RTC or RTT-interrupt, the only
> way to get the system to start again is to remove the backup power (e.g.
> battery) or to disable the interrupt manually from the bootloader. In
> particular, a user reset is not sufficient.
>
> Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
and added to the at91-3.13-fixes-non-critical branch with the "stable" tag:
Cc: stable@vger.kernel.org # 3.11.x
Thanks for your patience, bye,
> ---
> arch/arm/mach-at91/at91sam9260.c | 2 ++
> arch/arm/mach-at91/at91sam9261.c | 2 ++
> arch/arm/mach-at91/at91sam9263.c | 3 +++
> arch/arm/mach-at91/at91sam9g45.c | 1 +
> arch/arm/mach-at91/at91sam9rl.c | 1 +
> arch/arm/mach-at91/generic.h | 1 +
> arch/arm/mach-at91/sysirq_mask.c | 24 ++++++++++++++++++++++++
> 7 files changed, 34 insertions(+)
>
> diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
> index 5de6074..ae10d14 100644
> --- a/arch/arm/mach-at91/at91sam9260.c
> +++ b/arch/arm/mach-at91/at91sam9260.c
> @@ -349,6 +349,8 @@ static void __init at91sam9260_initialize(void)
> arm_pm_idle = at91sam9_idle;
> arm_pm_restart = at91sam9_alt_restart;
>
> + at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
> +
> /* Register GPIO subsystem */
> at91_gpio_init(at91sam9260_gpio, 3);
> }
> diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
> index 0e07932..e761e74 100644
> --- a/arch/arm/mach-at91/at91sam9261.c
> +++ b/arch/arm/mach-at91/at91sam9261.c
> @@ -291,6 +291,8 @@ static void __init at91sam9261_initialize(void)
> arm_pm_idle = at91sam9_idle;
> arm_pm_restart = at91sam9_alt_restart;
>
> + at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
> +
> /* Register GPIO subsystem */
> at91_gpio_init(at91sam9261_gpio, 3);
> }
> diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
> index 962768b..ad02281 100644
> --- a/arch/arm/mach-at91/at91sam9263.c
> +++ b/arch/arm/mach-at91/at91sam9263.c
> @@ -330,6 +330,9 @@ static void __init at91sam9263_initialize(void)
> arm_pm_idle = at91sam9_idle;
> arm_pm_restart = at91sam9_alt_restart;
>
> + at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
> + at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
> +
> /* Register GPIO subsystem */
> at91_gpio_init(at91sam9263_gpio, 5);
> }
> diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
> index 8d4da6d..88e6f7b 100644
> --- a/arch/arm/mach-at91/at91sam9g45.c
> +++ b/arch/arm/mach-at91/at91sam9g45.c
> @@ -380,6 +380,7 @@ static void __init at91sam9g45_initialize(void)
> arm_pm_restart = at91sam9g45_restart;
>
> at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
> + at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
>
> /* Register GPIO subsystem */
> at91_gpio_init(at91sam9g45_gpio, 5);
> diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
> index b5a8c9d..301e172 100644
> --- a/arch/arm/mach-at91/at91sam9rl.c
> +++ b/arch/arm/mach-at91/at91sam9rl.c
> @@ -295,6 +295,7 @@ static void __init at91sam9rl_initialize(void)
> arm_pm_restart = at91sam9_alt_restart;
>
> at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
> + at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
>
> /* Register GPIO subsystem */
> at91_gpio_init(at91sam9rl_gpio, 4);
> diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
> index 80269bd..26dee3c 100644
> --- a/arch/arm/mach-at91/generic.h
> +++ b/arch/arm/mach-at91/generic.h
> @@ -35,6 +35,7 @@ extern int __init at91_aic_of_init(struct device_node *node,
> extern int __init at91_aic5_of_init(struct device_node *node,
> struct device_node *parent);
> extern void __init at91_sysirq_mask_rtc(u32 rtc_base);
> +extern void __init at91_sysirq_mask_rtt(u32 rtt_base);
>
>
> /* Timer */
> diff --git a/arch/arm/mach-at91/sysirq_mask.c b/arch/arm/mach-at91/sysirq_mask.c
> index ee3e22c..2ba694f 100644
> --- a/arch/arm/mach-at91/sysirq_mask.c
> +++ b/arch/arm/mach-at91/sysirq_mask.c
> @@ -21,6 +21,7 @@
> */
>
> #include <linux/io.h>
> +#include <mach/at91_rtt.h>
>
> #include "generic.h"
>
> @@ -45,3 +46,26 @@ void __init at91_sysirq_mask_rtc(u32 rtc_base)
>
> iounmap(base);
> }
> +
> +void __init at91_sysirq_mask_rtt(u32 rtt_base)
> +{
> + void __iomem *base;
> + void __iomem *reg;
> + u32 mode;
> +
> + base = ioremap(rtt_base, 16);
> + if (!base)
> + return;
> +
> + reg = base + AT91_RTT_MR;
> +
> + mode = readl_relaxed(reg);
> + if (mode & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)) {
> + pr_info("AT91: Disabling rtt irq\n");
> + mode &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
> + writel_relaxed(mode, reg);
> + (void)readl_relaxed(reg); /* flush */
> + }
> +
> + iounmap(base);
> +}
>
--
Nicolas Ferre
next prev parent reply other threads:[~2013-11-15 11:10 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 12:51 [PATCH 0/3] ARM: at91: fix hanged boot Johan Hovold
2013-03-08 12:51 ` [PATCH 1/3] ARM: at91/rtc: fix boot after RTC wake-up Johan Hovold
2013-03-08 12:51 ` [PATCH 2/3] Revert "arm: at91: move at91rm9200 rtc header in drivers/rtc" Johan Hovold
2013-03-08 12:51 ` [PATCH 3/3] ARM: at91: fix hanged boot Johan Hovold
2013-03-08 16:02 ` [rtc-linux] " Jean-Christophe PLAGNIOL-VILLARD
2013-03-11 10:02 ` Johan Hovold
2013-03-11 11:06 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-11 18:06 ` Johan Hovold
2013-03-11 18:07 ` [PATCH v2 0/5] " Johan Hovold
2013-03-11 18:07 ` [PATCH v2 1/5] ARM: at91/rtc: fix boot after RTC wake-up Johan Hovold
2013-03-11 18:07 ` [PATCH v2 2/5] ARM: at91/dts: add RTC nodes Johan Hovold
2013-03-11 18:07 ` [PATCH v2 3/5] ARM: at91/dts: add RTT nodes Johan Hovold
2013-03-11 18:07 ` [PATCH v2 4/5] Revert "arm: at91: move at91rm9200 rtc header in drivers/rtc" Johan Hovold
2013-03-11 18:07 ` [PATCH v2 5/5] ARM: at91: fix hanged boot Johan Hovold
2013-04-11 15:55 ` [PATCH v2 0/5] " Johan Hovold
2013-04-11 16:54 ` [rtc-linux] " Jean-Christophe PLAGNIOL-VILLARD
2013-04-12 9:33 ` Johan Hovold
2013-04-12 12:09 ` Nicolas Ferre
2013-10-16 9:56 ` [PATCH v3 0/3] " Johan Hovold
2013-10-16 9:56 ` [PATCH v3 1/3] ARM: at91: fix hanged boot due to early rtc-interrupt Johan Hovold
2013-11-15 11:09 ` Nicolas Ferre
2013-10-16 9:56 ` [PATCH v3 2/3] ARM: at91: fix hanged boot due to early rtt-interrupt Johan Hovold
2013-11-15 11:10 ` Nicolas Ferre [this message]
2013-10-16 9:56 ` [PATCH v3 3/3] ARM: at91/rtc: disable interrupts at shutdown Johan Hovold
2013-11-15 10:43 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52860135.3030409@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=a.zummo@towertech.it \
--cc=jhovold@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@maxim.org.za \
--cc=plagnioj@jcrosoft.com \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox