From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753241Ab3LCI70 (ORCPT ); Tue, 3 Dec 2013 03:59:26 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:40765 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752513Ab3LCI7X (ORCPT ); Tue, 3 Dec 2013 03:59:23 -0500 Message-ID: <529D9D43.6040101@ti.com> Date: Tue, 3 Dec 2013 14:28:43 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.1.0 MIME-Version: 1.0 To: Marek Belisko , , CC: , , , Subject: Re: [PATCH] omap: twl-common: Fix musb-hdrc device name. References: <1386059589-4030-1-git-send-email-marek.belisko@open-nandra.com> In-Reply-To: <1386059589-4030-1-git-send-email-marek.belisko@open-nandra.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote: > Without this change when booting omap3 device (gta04) with board file > leads to follwing errors: > > [ 1.203308] musb-hdrc musb-hdrc.0.auto: unable to find phy > [ 1.209075] HS USB OTG: no transceiver configured > [ 1.214019] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 > > and usb isn't working. > > This is probably regression caused by commit: 6c27f939 I think a better fix would be to have this merged.. https://lkml.org/lkml/2013/7/26/91 > > Signed-off-by: Marek Belisko > --- > arch/arm/mach-omap2/twl-common.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c > index b0d54da..3640ce0 100644 > --- a/arch/arm/mach-omap2/twl-common.c > +++ b/arch/arm/mach-omap2/twl-common.c > @@ -92,7 +92,7 @@ void __init omap_pmic_late_init(void) > > #if defined(CONFIG_ARCH_OMAP3) > struct phy_consumer consumers[] = { > - PHY_CONSUMER("musb-hdrc.0", "usb"), > + PHY_CONSUMER("musb-hdrc.0.auto", "usb"), the index '0' might vary for some boards leading it to again break musb. Thanks Kishon