From: Kukjin Kim <kgene.kim@samsung.com>
To: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: linux-pm@vger.kernel.org, naveenkrishna.ch@gmail.com,
rui.zhang@intel.com, eduardo.valentin@ti.com,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
amit.daniel@samsung.com, kgene.kim@samsung.com,
devicetree@vger.kernel.org, b.zolnierkie@samsung.com,
cpgs@samsung.com, t.figa@samsung.com
Subject: Re: [PATCH 4/4 v4] ARM: dts: Exynos5420: Add device nodes for TMU blocks
Date: Tue, 10 Dec 2013 06:15:08 +0900 [thread overview]
Message-ID: <52A632DC.6040509@samsung.com> (raw)
In-Reply-To: <1384866359-16157-1-git-send-email-ch.naveen@samsung.com>
On 11/19/13 22:05, Naveen Krishna Chatradhi wrote:
> Exynos5420 SoC has per core thermal management unit.
> 5 TMU channels 4 for CPUs and 5th for GPU.
>
> This patch adds the device tree nodes to the DT device list.
>
> Nodes carry the misplaced second base address and the second
> clock to access the misplaced base address.
>
> Signed-off-by: Leela Krishna Amudala<l.krishna@samsung.com>
> Signed-off-by: Naveen Krishna Chatradhi<ch.naveen@samsung.com>
> Signed-off-by: Andrew Bresticker<abrestic@chromium.org>
> ---
> Changes since v3:
> None, Just respinning
>
> Changes since v2:
> 3. uses the new compatible strings introduced along with adding
> support for Exynso5420.
>
> Changes since v1:
> 1. Nodes carry the misplaced second base address and the second
> clock to access the misplaced base address.
> 2. Correct the clock number for the TMU4
>
> arch/arm/boot/dts/exynos5420.dtsi | 48 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 6ffefd1..d736b40 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -369,4 +369,52 @@
> clock-names = "gscl";
> samsung,power-domain =<&gsc_pd>;
> };
> +
> + /* tmu for CPU0 */
> + tmu@10060000 {
> + compatible = "samsung,exynos5420-tmu";
> + reg =<0x10060000 0x100>;
> + interrupts =<0 65 0>;
> + clocks =<&clock 318>;
> + clock-names = "tmu_apbif";
> + };
> +
> + /* tmu for CPU1 */
> + tmu@10064000 {
> + compatible = "samsung,exynos5420-tmu";
> + reg =<0x10064000 0x100>;
> + interrupts =<0 183 0>;
> + clocks =<&clock 318>;
> + clock-names = "tmu_apbif";
> + };
> +
> + /* tmu for CPU2 */
> + tmu@10068000 {
> + compatible = "samsung,exynos5420-tmu-triminfo";
> + /* 2nd reg is for the misplaced TRIMINFO register */
> + reg =<0x10068000 0x100>,<0x1006c000 0x4>;
> + interrupts =<0 184 0>;
> + clocks =<&clock 318>;
> + clock-names = "tmu_apbif";
> + };
> +
> + /* tmu for CPU3 */
> + tmu@1006c000 {
> + compatible = "samsung,exynos5420-tmu-triminfo-clk";
> + /* 2nd reg is for the misplaced TRIMINFO register */
> + reg =<0x1006c000 0x100>,<0x100a0000 0x4>;
> + interrupts =<0 185 0>;
> + clocks =<&clock 318>,<&clock 319>;
> + clock-names = "tmu_apbif", "tmu_apbif_triminfo";
> + };
> +
> + /* tmu for GPU */
> + tmu@100a0000 {
> + compatible = "samsung,exynos5420-tmu-triminfo-clk";
> + /* 2nd reg is for the misplaced TRIMINFO register */
> + reg =<0x100a0000 0x100>,<0x10068000 0x4>;
> + interrupts =<0 215 0>;
> + clocks =<&clock 319>,<&clock 318>;
> + clock-names = "tmu_apbif", "tmu_apbif_triminfo";
> + };
> };
BTW, there is just only this patch to support TMU on exynos5420?
- Kukjin
next prev parent reply other threads:[~2013-12-09 21:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1382004240-3282-1-git-send-email-l.krishna@samsung.com>
2013-11-12 6:37 ` [PATCH 4/4 v3] ARM: dts: Exynos5420: Add device nodes for TMU blocks Naveen Krishna Chatradhi
2013-11-18 3:22 ` Naveen Krishna Ch
2013-12-09 12:57 ` Tomasz Figa
2013-11-19 13:05 ` [PATCH 4/4 v4] " Naveen Krishna Chatradhi
2013-12-09 21:15 ` Kukjin Kim [this message]
2013-12-09 21:32 ` Tomasz Figa
2013-12-10 6:43 ` [PATCH v11 4/4] " Naveen Krishna Chatradhi
2013-12-19 6:07 ` [PATCH v12 " Naveen Krishna Chatradhi
2013-12-19 11:39 ` Tomasz Figa
2013-12-20 5:11 ` Naveen Krishna Chatradhi
2013-12-20 21:01 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A632DC.6040509@samsung.com \
--to=kgene.kim@samsung.com \
--cc=amit.daniel@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=ch.naveen@samsung.com \
--cc=cpgs@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=eduardo.valentin@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=naveenkrishna.ch@gmail.com \
--cc=rui.zhang@intel.com \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox