Re: [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show

[Nicolas Ferre <nicolas.ferre@atmel.com>]

On 07/12/2013 14:08, Alexandre Belloni :
> This allows to get the pin configuration by using debugfs. On my system:
>   # cat /sys/kernel/debug/pinctrl/pinctrl.3/pinconf-pins
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

I am fine with these helpers:

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

But still a little disappointed that Laurent announced that he wouldn't 
review the whole kernel ;-)

Bye guys and thanks a lot!

> ---
>   drivers/pinctrl/pinctrl-at91.c | 25 +++++++++++++++++++++++++
>   1 file changed, 25 insertions(+)
>
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index b0b78f3468ae..bcfc8a2eebca 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -784,10 +784,35 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
>   	return 0;
>   }
>
> +#define DBG_SHOW_FLAG(flag) do {		\
> +	if (config & flag) {			\
> +		if (num_conf)			\
> +			seq_puts(s, "|");	\
> +		seq_puts(s, #flag);		\
> +		num_conf++;			\
> +	}					\
> +} while (0)
> +
>   static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev,
>   				   struct seq_file *s, unsigned pin_id)
>   {
> +	unsigned long config;
> +	int ret, val, num_conf = 0;
> +
> +	ret = at91_pinconf_get(pctldev, pin_id, &config);
> +
> +	DBG_SHOW_FLAG(MULTI_DRIVE);
> +	DBG_SHOW_FLAG(PULL_UP);
> +	DBG_SHOW_FLAG(PULL_DOWN);
> +	DBG_SHOW_FLAG(DIS_SCHMIT);
> +	DBG_SHOW_FLAG(DEGLITCH);
> +	DBG_SHOW_FLAG(DEBOUNCE);
> +	if (config & DEBOUNCE) {
> +		val = config >> DEBOUNCE_VAL_SHIFT;
> +		seq_printf(s, "(%d)", val);
> +	}
>
> +	return;
>   }
>
>   static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
>


-- 
Nicolas Ferre