From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752000Ab3LSGNN (ORCPT ); Thu, 19 Dec 2013 01:13:13 -0500 Received: from arroyo.ext.ti.com ([192.94.94.40]:60115 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750807Ab3LSGNL (ORCPT ); Thu, 19 Dec 2013 01:13:11 -0500 Message-ID: <52B28E69.3030703@ti.com> Date: Thu, 19 Dec 2013 11:42:57 +0530 From: Roger Quadros User-Agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.2.0 MIME-Version: 1.0 To: Dmitry Torokhov CC: , , , , Subject: Re: [PATCH 1/9] Input: pixcir_i2c_ts: Add device tree support References: <1387358480-8313-1-git-send-email-rogerq@ti.com> <1387358480-8313-2-git-send-email-rogerq@ti.com> <20131218140918.GA28504@core.coreip.homeip.net> In-Reply-To: <20131218140918.GA28504@core.coreip.homeip.net> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 12/18/2013 07:39 PM, Dmitry Torokhov wrote: > Hi Roger, > > On Wed, Dec 18, 2013 at 02:51:12PM +0530, Roger Quadros wrote: >> Provide device tree support and binding information. >> Change platform data parameters from x/y_max to x/y_size.. > > I'd rather keep them as they were. OK. > >> >> Signed-off-by: Roger Quadros >> Acked-by: Mugunthan V N >> --- >> .../bindings/input/touchscreen/pixcir_i2c_ts.txt | 26 ++++++++ >> drivers/input/touchscreen/pixcir_i2c_ts.c | 77 ++++++++++++++++++++-- >> include/linux/input/pixcir_ts.h | 5 +- >> 3 files changed, 101 insertions(+), 7 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt >> >> diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt >> new file mode 100644 >> index 0000000..c0b0b270 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt >> @@ -0,0 +1,26 @@ >> +* Pixcir I2C touchscreen controllers >> + >> +Required properties: >> +- compatible: must be "pixcir,pixcir_ts" >> +- reg: I2C address of the chip >> +- interrupts: interrupt to which the chip is connected >> +- attb-gpio: GPIO connected to the ATTB line of the chip >> +- x-size: horizontal resolution of touchscreen >> +- y-size: vertical resolution of touchscreen >> + >> +Example: >> + >> + i2c@00000000 { >> + /* ... */ >> + >> + pixcir_ts@5c { >> + compatible = "pixcir,pixcir_ts"; >> + reg = <0x5c>; >> + interrupts = <2 0>; >> + attb-gpio = <&gpf 2 0 2>; >> + x-size = <800>; >> + y-size = <600>; >> + }; >> + >> + /* ... */ >> + }; >> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c >> index 6cc6b36..3a447c9 100644 >> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c >> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c >> @@ -24,6 +24,10 @@ >> #include >> #include >> #include >> +#include >> +#include >> +#include >> +#include >> >> struct pixcir_i2c_ts_data { >> struct i2c_client *client; >> @@ -125,15 +129,65 @@ static int pixcir_i2c_ts_resume(struct device *dev) >> static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, >> pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); >> >> +#if defined(CONFIG_OF) > > #ifdef is preferred for simple conditions. > >> +static const struct of_device_id pixcir_of_match[]; >> + >> +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) >> +{ >> + struct pixcir_ts_platform_data *pdata; >> + struct device_node *np = dev->of_node; >> + const struct of_device_id *match; >> + >> + match = of_match_device(of_match_ptr(pixcir_of_match), dev); >> + if (!match) >> + return ERR_PTR(-EINVAL); > > Why do you need an explicit match here? > Right, it is not needed here for this patch but used later in patch 6 to get chip specific data. I'll fix this while re-arranging the patches. >> + >> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); >> + if (!pdata) >> + return ERR_PTR(-ENOMEM); >> + >> + pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0); >> + if (!gpio_is_valid(pdata->gpio_attb)) >> + dev_err(dev, "Failed to get ATTB GPIO\n"); >> + >> + if (of_property_read_u32(np, "x-size", &pdata->x_size)) { >> + dev_err(dev, "Failed to get x-size property\n"); >> + return ERR_PTR(-EINVAL); >> + } >> + >> + if (of_property_read_u32(np, "y-size", &pdata->y_size)) { >> + dev_err(dev, "Failed to get y-size property\n"); >> + return ERR_PTR(-EINVAL); >> + } >> + >> + dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, >> + pdata->x_size, pdata->y_size, pdata->gpio_attb); >> + >> + return pdata; >> +} >> +#else >> +static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) >> +{ >> + return NULL; > > This should be > > return ERR_PTR(-EINVAL); > > since you test it with IS_ERR() later. OK. > >> +} >> +#endif >> + >> static int pixcir_i2c_ts_probe(struct i2c_client *client, >> const struct i2c_device_id *id) >> { >> const struct pixcir_ts_platform_data *pdata = client->dev.platform_data; >> + struct device *dev = &client->dev; >> + struct device_node *np = dev->of_node; >> struct pixcir_i2c_ts_data *tsdata; >> struct input_dev *input; >> int error; >> >> - if (!pdata) { >> + if (np) { >> + pdata = pixcir_parse_dt(dev); >> + if (IS_ERR(pdata)) >> + return PTR_ERR(pdata); > > We should be favoring kernel-provided platform data if it is pesent even > if there is dt-data available. This way user can override firmware,m if > needed. > OK. But how can the user override kernel provided platform data? Can't device tree overlays be used to patch DT data in the same fashion. I've not tried either so I don't know which one is more user friendly. >> + >> + } else if (!pdata) { >> dev_err(&client->dev, "platform data not defined\n"); >> return -EINVAL; >> } >> @@ -157,10 +211,14 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, >> __set_bit(EV_KEY, input->evbit); >> __set_bit(EV_ABS, input->evbit); >> __set_bit(BTN_TOUCH, input->keybit); >> - input_set_abs_params(input, ABS_X, 0, pdata->x_max, 0, 0); >> - input_set_abs_params(input, ABS_Y, 0, pdata->y_max, 0, 0); >> - input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); >> - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); >> + input_set_abs_params(input, ABS_X, >> + 0, pdata->x_size - 1, 0, 0); >> + input_set_abs_params(input, ABS_Y, >> + 0, pdata->y_size - 1, 0, 0); >> + input_set_abs_params(input, ABS_MT_POSITION_X, >> + 0, pdata->x_size - 1, 0, 0); >> + input_set_abs_params(input, ABS_MT_POSITION_Y, >> + 0, pdata->y_size - 1, 0, 0); >> >> input_set_drvdata(input, tsdata); >> >> @@ -211,11 +269,20 @@ static const struct i2c_device_id pixcir_i2c_ts_id[] = { >> }; >> MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); >> >> +#if defined(CONFIG_OF) >> +static const struct of_device_id pixcir_of_match[] = { >> + { .compatible = "pixcir,pixcir_ts", }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, pixcir_of_match); >> +#endif > > #ifdef is preferred for simple conditions. > OK. >> + >> static struct i2c_driver pixcir_i2c_ts_driver = { >> .driver = { >> .owner = THIS_MODULE, >> .name = "pixcir_ts", >> .pm = &pixcir_dev_pm_ops, >> + .of_match_table = of_match_ptr(pixcir_of_match), >> }, >> .probe = pixcir_i2c_ts_probe, >> .remove = pixcir_i2c_ts_remove, >> diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h >> index 7163d91..b34ff7e 100644 >> --- a/include/linux/input/pixcir_ts.h >> +++ b/include/linux/input/pixcir_ts.h >> @@ -3,8 +3,9 @@ >> >> struct pixcir_ts_platform_data { >> int (*attb_read_val)(void); >> - int x_max; >> - int y_max; >> + unsigned int x_size; /* X axis resolution */ >> + unsigned int y_size; /* Y axis resolution */ >> + int gpio_attb; /* GPIO connected to ATTB line */ >> }; > > OK, it looks like the series were split awkwardly: you are defining data > that is used by follow-up patches and its purpose is unclear when > reviewing patch-by-patch. I'd recommend rearranging so that DT support > patch is the very last in the series. > Got it. >> >> #endif >> -- >> 1.8.3.2 cheers, -roger