From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1755393Ab3LSPy1 (ORCPT <rfc822;w@1wt.eu>);
	Thu, 19 Dec 2013 10:54:27 -0500
Received: from eusmtp01.atmel.com ([212.144.249.242]:33455 "EHLO
	eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1753865Ab3LSPyX (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Thu, 19 Dec 2013 10:54:23 -0500
Message-ID: <52B316A9.1060407@atmel.com>
Date: Thu, 19 Dec 2013 16:54:17 +0100
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Organization: atmel
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0
MIME-Version: 1.0
To: Boris BREZILLON <b.brezillon@overkiz.com>, Rob Landley <rob@landley.net>,
        Jonathan Cameron <jic23@kernel.org>
CC: Arnd Bergmann <arnd@arndb.de>, <devicetree@vger.kernel.org>,
        <linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <linux-iio@vger.kernel.org>
Subject: Re: [PATCH] iio: at91: document ADC clock properties
References: <1387296973-7779-1-git-send-email-b.brezillon@overkiz.com>
In-Reply-To: <1387296973-7779-1-git-send-email-b.brezillon@overkiz.com>
X-Enigmail-Version: 1.5.2
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 7bit
X-Originating-IP: [10.161.30.18]
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On 17/12/2013 17:16, Boris BREZILLON :
> Document the clock properties required by the at91 ADC driver.
> 
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
>  .../devicetree/bindings/arm/atmel-adc.txt          |    5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
> index d106146..9a1175b 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
> @@ -5,6 +5,9 @@ Required properties:
>      <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
>    - reg: Should contain ADC registers location and length
>    - interrupts: Should contain the IRQ line for the ADC
> +  - clock-names: tuple listing input clock names.
> +	Required elements: "adc_clk", "adc_op_clk".
> +  - clocks: phandles to input clocks.
>    - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
>      device
>    - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
> @@ -44,6 +47,8 @@ adc0: adc@fffb0000 {
>  	compatible = "atmel,at91sam9260-adc";
>  	reg = <0xfffb0000 0x100>;
>  	interrupts = <20 4>;
> +	clocks = <&adc_clk>, <&adc_op_clk>;
> +	clock-names = "adc_clk", "adc_op_clk";
>  	atmel,adc-channel-base = <0x30>;
>  	atmel,adc-channels-used = <0xff>;
>  	atmel,adc-drdy-mask = <0x10000>;
> 


-- 
Nicolas Ferre