* Possible 3.13-rc nouveau regression with GT 560 Ti
@ 2013-12-31 10:14 Sid Boyce
2013-12-31 10:36 ` Ilia Mirkin
0 siblings, 1 reply; 11+ messages in thread
From: Sid Boyce @ 2013-12-31 10:14 UTC (permalink / raw)
To: LKML Mailing List, opensuse factory list
System x86_64 with openSUSE 13.1.
X.Org version: 1.14.99.905
openSUSE 12.2 kernels boot successfully into a graphical screen, login
to KDE4, etc. all normal.
3.13-rc kernels boot fully with X running but no graphical screen and it
freezes in VC with not all the startup messages displayed but I could
ssh in from another box to check dmesg and logs.
Xorg.0.log which I thought I had saved did not log an error.
dmesg said "nouveau Playlist update failed".
Changed the GeForce GT 560 Ti for a GeForce 8600 GT and 3.13.0-rc6 is up
and running.
If necessary I can go back to the GT 560 Ti to gather dmesg and Xorg log
information.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2013-12-31 10:14 Possible 3.13-rc nouveau regression with GT 560 Ti Sid Boyce
@ 2013-12-31 10:36 ` Ilia Mirkin
2014-01-01 0:41 ` Sid Boyce
0 siblings, 1 reply; 11+ messages in thread
From: Ilia Mirkin @ 2013-12-31 10:36 UTC (permalink / raw)
To: sboyce
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
On Tue, Dec 31, 2013 at 5:14 AM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
> System x86_64 with openSUSE 13.1.
> X.Org version: 1.14.99.905
>
> openSUSE 12.2 kernels boot successfully into a graphical screen, login to
> KDE4, etc. all normal.
>
> 3.13-rc kernels boot fully with X running but no graphical screen and it
> freezes in VC with not all the startup messages displayed but I could ssh in
> from another box to check dmesg and logs.
>
> Xorg.0.log which I thought I had saved did not log an error.
>
> dmesg said "nouveau Playlist update failed".
>
> Changed the GeForce GT 560 Ti for a GeForce 8600 GT and 3.13.0-rc6 is up and
> running.
>
> If necessary I can go back to the GT 560 Ti to gather dmesg and Xorg log
> information.
Having a dmesg would be nice. One thing I can think of off-hand is
that 3.13-rc has MSI turned on by default. You can turn it off by
adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
show the offending commit fairly quickly.
-ilia
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2013-12-31 10:36 ` Ilia Mirkin
@ 2014-01-01 0:41 ` Sid Boyce
2014-01-01 0:55 ` Ilia Mirkin
0 siblings, 1 reply; 11+ messages in thread
From: Sid Boyce @ 2014-01-01 0:41 UTC (permalink / raw)
To: Ilia Mirkin
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
On 31/12/13 10:36, Ilia Mirkin wrote:
> On Tue, Dec 31, 2013 at 5:14 AM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>> System x86_64 with openSUSE 13.1.
>> X.Org version: 1.14.99.905
>>
>> openSUSE 12.2 kernels boot successfully into a graphical screen, login to
>> KDE4, etc. all normal.
>>
>> 3.13-rc kernels boot fully with X running but no graphical screen and it
>> freezes in VC with not all the startup messages displayed but I could ssh in
>> from another box to check dmesg and logs.
>>
>> Xorg.0.log which I thought I had saved did not log an error.
>>
>> dmesg said "nouveau Playlist update failed".
>>
>> Changed the GeForce GT 560 Ti for a GeForce 8600 GT and 3.13.0-rc6 is up and
>> running.
>>
>> If necessary I can go back to the GT 560 Ti to gather dmesg and Xorg log
>> information.
> Having a dmesg would be nice. One thing I can think of off-hand is
> that 3.13-rc has MSI turned on by default. You can turn it off by
> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
> show the offending commit fairly quickly.
>
> -ilia
>
Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8
introduced it.
Thanks Ilia,
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2014-01-01 0:41 ` Sid Boyce
@ 2014-01-01 0:55 ` Ilia Mirkin
2014-01-01 1:44 ` Sid Boyce
2014-01-01 14:04 ` Sid Boyce
0 siblings, 2 replies; 11+ messages in thread
From: Ilia Mirkin @ 2014-01-01 0:55 UTC (permalink / raw)
To: sboyce
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
On Tue, Dec 31, 2013 at 7:41 PM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
> On 31/12/13 10:36, Ilia Mirkin wrote:
>>
>> On Tue, Dec 31, 2013 at 5:14 AM, Sid Boyce <sboyce@blueyonder.co.uk>
>> wrote:
>>>
>>> System x86_64 with openSUSE 13.1.
>>> X.Org version: 1.14.99.905
>>>
>>> openSUSE 12.2 kernels boot successfully into a graphical screen, login to
>>> KDE4, etc. all normal.
>>>
>>> 3.13-rc kernels boot fully with X running but no graphical screen and it
>>> freezes in VC with not all the startup messages displayed but I could ssh
>>> in
>>> from another box to check dmesg and logs.
>>>
>>> Xorg.0.log which I thought I had saved did not log an error.
>>>
>>> dmesg said "nouveau Playlist update failed".
>>>
>>> Changed the GeForce GT 560 Ti for a GeForce 8600 GT and 3.13.0-rc6 is up
>>> and
>>> running.
>>>
>>> If necessary I can go back to the GT 560 Ti to gather dmesg and Xorg log
>>> information.
>>
>> Having a dmesg would be nice. One thing I can think of off-hand is
>> that 3.13-rc has MSI turned on by default. You can turn it off by
>> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
>> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
>> show the offending commit fairly quickly.
>>
>> -ilia
>>
> Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
> So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8 introduced
> it.
Any chance you might mmiotrace the blob (version 325 or later) to see
which registers it fiddles with? Or alternatively, if you have a NVCE
card (you never did end up providing the logs which would have made
that apparent), could you try replacing nvc3_mc_oclass with
nvc0_mc_oclass for the 0xce case in
drivers/gpu/drm/nouveau/core/engine/device/nvc0.c? (and boot without
the MSI disabling.) The switch has already been made for NVC8 in
0bae1d61c75 -- perhaps there are more "odd" ones.
-ilia
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2014-01-01 0:55 ` Ilia Mirkin
@ 2014-01-01 1:44 ` Sid Boyce
2014-01-01 14:04 ` Sid Boyce
1 sibling, 0 replies; 11+ messages in thread
From: Sid Boyce @ 2014-01-01 1:44 UTC (permalink / raw)
To: Ilia Mirkin
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
[-- Attachment #1: Type: text/plain, Size: 3168 bytes --]
On 01/01/14 00:55, Ilia Mirkin wrote:
> On Tue, Dec 31, 2013 at 7:41 PM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>> On 31/12/13 10:36, Ilia Mirkin wrote:
>>> On Tue, Dec 31, 2013 at 5:14 AM, Sid Boyce <sboyce@blueyonder.co.uk>
>>> wrote:
>>>> System x86_64 with openSUSE 13.1.
>>>> X.Org version: 1.14.99.905
>>>>
>>>> openSUSE 12.2 kernels boot successfully into a graphical screen, login to
>>>> KDE4, etc. all normal.
>>>>
>>>> 3.13-rc kernels boot fully with X running but no graphical screen and it
>>>> freezes in VC with not all the startup messages displayed but I could ssh
>>>> in
>>>> from another box to check dmesg and logs.
>>>>
>>>> Xorg.0.log which I thought I had saved did not log an error.
>>>>
>>>> dmesg said "nouveau Playlist update failed".
>>>>
>>>> Changed the GeForce GT 560 Ti for a GeForce 8600 GT and 3.13.0-rc6 is up
>>>> and
>>>> running.
>>>>
>>>> If necessary I can go back to the GT 560 Ti to gather dmesg and Xorg log
>>>> information.
>>> Having a dmesg would be nice. One thing I can think of off-hand is
>>> that 3.13-rc has MSI turned on by default. You can turn it off by
>>> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
>>> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
>>> show the offending commit fairly quickly.
>>>
>>> -ilia
>>>
>> Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
>> So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8 introduced
>> it.
> Any chance you might mmiotrace the blob (version 325 or later) to see
> which registers it fiddles with? Or alternatively, if you have a NVCE
> card (you never did end up providing the logs which would have made
> that apparent), could you try replacing nvc3_mc_oclass with
> nvc0_mc_oclass for the 0xce case in
> drivers/gpu/drm/nouveau/core/engine/device/nvc0.c? (and boot without
> the MSI disabling.) The switch has already been made for NVC8 in
> 0bae1d61c75 -- perhaps there are more "odd" ones.
>
> -ilia
>
I'll have a look tomorrow - it is a NVCE card..
With everything running at the moment
# echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
bash: echo: write error: Invalid argument
I shall build a new kernel (3.13.0-rc51) with the change
case 0xce:
device->cname = "GF114";
device->oclass[NVDEV_SUBDEV_VBIOS ] =
&nouveau_bios_oclass;
device->oclass[NVDEV_SUBDEV_GPIO ] = &nv50_gpio_oclass;
device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass;
device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass;
device->oclass[NVDEV_SUBDEV_THERM ] = &nva3_therm_oclass;
device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
device->oclass[NVDEV_SUBDEV_DEVINIT] =
&nvc0_devinit_oclass;
device->oclass[NVDEV_SUBDEV_MC ] = nvc3_mc_oclass;
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 47836 bytes --]
[ 97.740]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 97.740]
X.Org X Server 1.14.99.905 (1.15.0 RC 5)
Release Date: 2013-12-19
[ 97.740] X Protocol Version 11, Revision 0
[ 97.740] Build Operating System: openSUSE SUSE LINUX
[ 97.740] Current Operating System: Linux slipstream 3.13.0-rc6-smp+ #1 SMP PREEMPT Mon Dec 30 15:47:46 GMT 2013 x86_64
[ 97.740] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-rc6-smp+ root=UUID=9e02a4c0-c401-4874-a706-30ec3f0a98aa nouveau.config=NvMSI=0 quiet splash
[ 97.740] Build Date: 22 December 2013 07:18:32PM
[ 97.740]
[ 97.740] Current version of pixman: 0.32.4
[ 97.740] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 97.740] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 97.740] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 1 00:26:25 2014
[ 97.741] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 97.741] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 97.741] (==) No Layout section. Using the first Screen section.
[ 97.741] (==) No screen section available. Using defaults.
[ 97.741] (**) |-->Screen "Default Screen Section" (0)
[ 97.741] (**) | |-->Monitor "<default monitor>"
[ 97.741] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 97.741] (==) Automatically adding devices
[ 97.741] (==) Automatically enabling devices
[ 97.741] (==) Automatically adding GPU devices
[ 97.741] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 97.741] Entry deleted from font path.
[ 97.741] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 97.741] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 97.741] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 97.741] (II) Loader magic: 0x80ac60
[ 97.741] (II) Module ABI versions:
[ 97.741] X.Org ANSI C Emulation: 0.4
[ 97.741] X.Org Video Driver: 15.0
[ 97.741] X.Org XInput driver : 20.0
[ 97.741] X.Org Server Extension : 8.0
[ 97.741] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 97.743] (--) PCI:*(0:1:0:0) 10de:1200:1043:838b rev 161, Mem @ 0xf8000000/33554432, 0xd0000000/134217728, 0xdc000000/67108864, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 97.743] Initializing built-in extension Generic Event Extension
[ 97.743] Initializing built-in extension SHAPE
[ 97.743] Initializing built-in extension MIT-SHM
[ 97.743] Initializing built-in extension XInputExtension
[ 97.743] Initializing built-in extension XTEST
[ 97.743] Initializing built-in extension BIG-REQUESTS
[ 97.743] Initializing built-in extension SYNC
[ 97.743] Initializing built-in extension XKEYBOARD
[ 97.743] Initializing built-in extension XC-MISC
[ 97.743] Initializing built-in extension SECURITY
[ 97.743] Initializing built-in extension XINERAMA
[ 97.743] Initializing built-in extension XFIXES
[ 97.743] Initializing built-in extension RENDER
[ 97.743] Initializing built-in extension RANDR
[ 97.743] Initializing built-in extension COMPOSITE
[ 97.743] Initializing built-in extension DAMAGE
[ 97.743] Initializing built-in extension MIT-SCREEN-SAVER
[ 97.743] Initializing built-in extension DOUBLE-BUFFER
[ 97.743] Initializing built-in extension RECORD
[ 97.743] Initializing built-in extension DPMS
[ 97.743] Initializing built-in extension Present
[ 97.743] Initializing built-in extension DRI3
[ 97.743] Initializing built-in extension X-Resource
[ 97.743] Initializing built-in extension XVideo
[ 97.743] Initializing built-in extension XVideo-MotionCompensation
[ 97.743] Initializing built-in extension XFree86-VidModeExtension
[ 97.743] Initializing built-in extension XFree86-DGA
[ 97.743] Initializing built-in extension XFree86-DRI
[ 97.743] Initializing built-in extension DRI2
[ 97.743] (II) LoadModule: "glx"
[ 97.783] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 97.784] (II) Module glx: vendor="X.Org Foundation"
[ 97.784] compiled for 1.14.99.905, module version = 1.0.0
[ 97.784] ABI class: X.Org Server Extension, version 8.0
[ 97.784] (==) AIGLX enabled
[ 97.784] Loading extension GLX
[ 97.784] (==) Matched nvidia as autoconfigured driver 0
[ 97.784] (==) Matched nouveau as autoconfigured driver 1
[ 97.784] (==) Matched nv as autoconfigured driver 2
[ 97.784] (==) Matched nvidia as autoconfigured driver 3
[ 97.784] (==) Matched nouveau as autoconfigured driver 4
[ 97.784] (==) Matched nv as autoconfigured driver 5
[ 97.784] (==) Matched modesetting as autoconfigured driver 6
[ 97.784] (==) Matched fbdev as autoconfigured driver 7
[ 97.784] (==) Matched vesa as autoconfigured driver 8
[ 97.784] (==) Assigned the driver to the xf86ConfigLayout
[ 97.784] (II) LoadModule: "nvidia"
[ 97.818] (WW) Warning, couldn't open module nvidia
[ 97.818] (II) UnloadModule: "nvidia"
[ 97.818] (II) Unloading nvidia
[ 97.818] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 97.818] (II) LoadModule: "nouveau"
[ 97.819] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 97.819] (II) Module nouveau: vendor="X.Org Foundation"
[ 97.819] compiled for 1.14.99.904, module version = 1.0.10
[ 97.819] Module class: X.Org Video Driver
[ 97.819] ABI class: X.Org Video Driver, version 15.0
[ 97.819] (II) LoadModule: "nv"
[ 97.819] (WW) Warning, couldn't open module nv
[ 97.819] (II) UnloadModule: "nv"
[ 97.819] (II) Unloading nv
[ 97.819] (EE) Failed to load module "nv" (module does not exist, 0)
[ 97.819] (II) LoadModule: "modesetting"
[ 97.819] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 97.819] (II) Module modesetting: vendor="X.Org Foundation"
[ 97.819] compiled for 1.14.99.904, module version = 0.8.0
[ 97.819] Module class: X.Org Video Driver
[ 97.819] ABI class: X.Org Video Driver, version 15.0
[ 97.819] (II) LoadModule: "fbdev"
[ 97.819] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 97.820] (II) Module fbdev: vendor="X.Org Foundation"
[ 97.820] compiled for 1.14.99.904, module version = 0.4.4
[ 97.820] Module class: X.Org Video Driver
[ 97.820] ABI class: X.Org Video Driver, version 15.0
[ 97.820] (II) LoadModule: "vesa"
[ 97.820] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 97.820] (II) Module vesa: vendor="X.Org Foundation"
[ 97.820] compiled for 1.14.99.904, module version = 2.3.3
[ 97.820] Module class: X.Org Video Driver
[ 97.820] ABI class: X.Org Video Driver, version 15.0
[ 97.820] (II) NOUVEAU driver
[ 97.820] (II) NOUVEAU driver for NVIDIA chipset families :
[ 97.820] RIVA TNT (NV04)
[ 97.820] RIVA TNT2 (NV05)
[ 97.820] GeForce 256 (NV10)
[ 97.820] GeForce 2 (NV11, NV15)
[ 97.820] GeForce 4MX (NV17, NV18)
[ 97.820] GeForce 3 (NV20)
[ 97.820] GeForce 4Ti (NV25, NV28)
[ 97.820] GeForce FX (NV3x)
[ 97.820] GeForce 6 (NV4x)
[ 97.820] GeForce 7 (G7x)
[ 97.820] GeForce 8 (G8x)
[ 97.820] GeForce GTX 200 (NVA0)
[ 97.820] GeForce GTX 400 (NVC0)
[ 97.820] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 97.820] (II) FBDEV: driver for framebuffer: fbdev
[ 97.820] (II) VESA: driver for VESA chipsets: vesa
[ 97.820] (++) using VT number 7
[ 97.820] (II) [drm] nouveau interface version: 1.1.1
[ 97.820] (WW) Falling back to old probe method for modesetting
[ 97.820] (WW) Falling back to old probe method for fbdev
[ 97.820] (II) Loading sub module "fbdevhw"
[ 97.820] (II) LoadModule: "fbdevhw"
[ 97.821] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 97.821] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 97.821] compiled for 1.14.99.905, module version = 0.0.2
[ 97.821] ABI class: X.Org Video Driver, version 15.0
[ 97.821] (WW) Falling back to old probe method for vesa
[ 97.821] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 97.821] (II) Loading sub module "dri2"
[ 97.821] (II) LoadModule: "dri2"
[ 97.821] (II) Module "dri2" already built-in
[ 97.821] (--) NOUVEAU(0): Chipset: "NVIDIA NVCE"
[ 97.821] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 97.821] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 97.821] (==) NOUVEAU(0): RGB weight 888
[ 97.821] (==) NOUVEAU(0): Default visual is TrueColor
[ 97.821] (==) NOUVEAU(0): Using HW cursor
[ 97.821] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 97.821] (==) NOUVEAU(0): Page flipping enabled
[ 97.821] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 97.846] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 97.902] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 97.904] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 97.927] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 97.984] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 97.984] (II) NOUVEAU(0): Manufacturer: SAM Model: 795 Serial#: 1110590298
[ 97.984] (II) NOUVEAU(0): Year: 2012 Week: 6
[ 97.984] (II) NOUVEAU(0): EDID Version: 1.3
[ 97.984] (II) NOUVEAU(0): Digital Display Input
[ 97.984] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 97.984] (II) NOUVEAU(0): Gamma: 2.20
[ 97.984] (II) NOUVEAU(0): DPMS capabilities: Off
[ 97.984] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 97.984] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 97.984] (II) NOUVEAU(0): redX: 0.641 redY: 0.338 greenX: 0.315 greenY: 0.629
[ 97.984] (II) NOUVEAU(0): blueX: 0.159 blueY: 0.059 whiteX: 0.312 whiteY: 0.329
[ 97.984] (II) NOUVEAU(0): Supported established timings:
[ 97.984] (II) NOUVEAU(0): 720x400@70Hz
[ 97.984] (II) NOUVEAU(0): 640x480@60Hz
[ 97.984] (II) NOUVEAU(0): 640x480@67Hz
[ 97.984] (II) NOUVEAU(0): 640x480@72Hz
[ 97.984] (II) NOUVEAU(0): 640x480@75Hz
[ 97.984] (II) NOUVEAU(0): 800x600@56Hz
[ 97.984] (II) NOUVEAU(0): 800x600@60Hz
[ 97.984] (II) NOUVEAU(0): 800x600@72Hz
[ 97.984] (II) NOUVEAU(0): 800x600@75Hz
[ 97.984] (II) NOUVEAU(0): 832x624@75Hz
[ 97.984] (II) NOUVEAU(0): 1024x768@60Hz
[ 97.984] (II) NOUVEAU(0): 1024x768@70Hz
[ 97.984] (II) NOUVEAU(0): 1024x768@75Hz
[ 97.984] (II) NOUVEAU(0): 1280x1024@75Hz
[ 97.984] (II) NOUVEAU(0): 1152x864@75Hz
[ 97.984] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 97.984] (II) NOUVEAU(0): Supported standard timings:
[ 97.984] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 97.984] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 97.984] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 97.984] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 97.984] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 97.984] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 97.984] (II) NOUVEAU(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 97.984] (II) NOUVEAU(0): #7: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 97.984] (II) NOUVEAU(0): Supported detailed timing:
[ 97.984] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 97.984] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 97.984] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 97.984] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 97.984] (II) NOUVEAU(0): Monitor name: SA300/SA350
[ 97.984] (II) NOUVEAU(0): Serial No: H4XC205202
[ 97.984] (II) NOUVEAU(0): Supported detailed timing:
[ 97.984] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 97.984] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 97.984] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 97.984] (II) NOUVEAU(0): Supported detailed timing:
[ 97.984] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 97.984] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 97.984] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 97.984] (II) NOUVEAU(0): Supported detailed timing:
[ 97.984] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 97.984] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 97.984] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 97.984] (II) NOUVEAU(0): Supported detailed timing:
[ 97.984] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 97.984] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 97.984] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 97.984] (II) NOUVEAU(0): Supported detailed timing:
[ 97.984] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 97.984] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 97.984] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 97.984] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 97.984] (II) NOUVEAU(0): EDID (in hex):
[ 97.984] (II) NOUVEAU(0): 00ffffffffffff004c2d95075a433242
[ 97.984] (II) NOUVEAU(0): 0616010380341d782a2cc1a45650a128
[ 97.984] (II) NOUVEAU(0): 0f5054bfef808100814081809500a940
[ 97.984] (II) NOUVEAU(0): b300714f950f023a801871382d40582c
[ 97.984] (II) NOUVEAU(0): 450009252100001e000000fd00384b1e
[ 97.984] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 97.984] (II) NOUVEAU(0): 413330302f53413335300a20000000ff
[ 97.984] (II) NOUVEAU(0): 00483458433230353230320a20200176
[ 97.984] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
[ 97.984] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
[ 97.984] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
[ 97.984] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
[ 97.984] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
[ 97.984] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
[ 97.984] (II) NOUVEAU(0): 00000000000000000000000000000000
[ 97.984] (II) NOUVEAU(0): 0000000000000000000000000000005e
[ 97.984] (II) NOUVEAU(0): Printing probed modes for output DVI-I-2
[ 97.984] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 97.984] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 97.984] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 97.984] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 97.984] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 97.984] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 97.984] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 97.985] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 97.987] (II) NOUVEAU(0): EDID for output HDMI-1
[ 97.987] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 97.987] (II) NOUVEAU(0): Output DVI-I-2 connected
[ 97.987] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 97.987] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 97.987] (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1920x1080
[ 97.987] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 97.987] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 97.987] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 97.987] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 56.2 kHz, 50.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1920x1080": 148.4 MHz (scaled from 0.0 MHz), 67.4 kHz, 59.9 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 59.9 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "720x576": 27.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 97.987] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 97.987] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 97.987] (==) NOUVEAU(0): DPI set to (96, 96)
[ 97.987] (II) Loading sub module "fb"
[ 97.988] (II) LoadModule: "fb"
[ 97.988] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 97.988] (II) Module fb: vendor="X.Org Foundation"
[ 97.988] compiled for 1.14.99.905, module version = 1.0.0
[ 97.988] ABI class: X.Org ANSI C Emulation, version 0.4
[ 97.988] (II) Loading sub module "exa"
[ 97.988] (II) LoadModule: "exa"
[ 97.988] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 97.988] (II) Module exa: vendor="X.Org Foundation"
[ 97.988] compiled for 1.14.99.905, module version = 2.6.0
[ 97.988] ABI class: X.Org Video Driver, version 15.0
[ 97.988] (II) Loading sub module "shadowfb"
[ 97.988] (II) LoadModule: "shadowfb"
[ 97.988] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 97.989] (II) Module shadowfb: vendor="X.Org Foundation"
[ 97.989] compiled for 1.14.99.905, module version = 1.0.0
[ 97.989] ABI class: X.Org ANSI C Emulation, version 0.4
[ 97.989] (II) UnloadModule: "modesetting"
[ 97.989] (II) Unloading modesetting
[ 97.989] (II) UnloadModule: "fbdev"
[ 97.989] (II) Unloading fbdev
[ 97.989] (II) UnloadSubModule: "fbdevhw"
[ 97.989] (II) Unloading fbdevhw
[ 97.989] (II) UnloadModule: "vesa"
[ 97.989] (II) Unloading vesa
[ 97.989] (--) Depth 24 pixmap format is 32 bpp
[ 97.990] (II) NOUVEAU(0): Opened GPU channel 0
[ 97.992] (II) NOUVEAU(0): [DRI2] Setup complete
[ 97.992] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 97.992] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 97.993] (II) EXA(0): Driver allocated offscreen pixmaps
[ 97.993] (II) EXA(0): Driver registered support for the following operations:
[ 97.993] (II) Solid
[ 97.993] (II) Copy
[ 97.993] (II) Composite (RENDER acceleration)
[ 97.993] (II) UploadToScreen
[ 97.993] (II) DownloadFromScreen
[ 97.993] (==) NOUVEAU(0): Backing store enabled
[ 97.993] (==) NOUVEAU(0): Silken mouse enabled
[ 97.993] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 97.993] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 97.993] (==) NOUVEAU(0): DPMS enabled
[ 97.993] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 97.993] (--) RandR disabled
[ 98.016] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 98.016] (II) AIGLX: enabled GLX_ARB_create_context
[ 98.016] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 98.016] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 98.016] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 98.016] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 98.016] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 98.016] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 98.016] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 98.016] (II) AIGLX: Loaded and initialized nouveau
[ 98.016] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 98.020] (II) NOUVEAU(0): NVEnterVT is called.
[ 98.053] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 98.053] resize called 1920 1080
[ 98.113] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 98.113] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 98.113] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 98.113] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 98.113] (II) LoadModule: "evdev"
[ 98.114] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 98.114] (II) Module evdev: vendor="X.Org Foundation"
[ 98.114] compiled for 1.14.99.905, module version = 2.8.2
[ 98.114] Module class: X.Org XInput Driver
[ 98.114] ABI class: X.Org XInput driver, version 20.0
[ 98.114] (II) Using input driver 'evdev' for 'Power Button'
[ 98.114] (**) Power Button: always reports core events
[ 98.114] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 98.114] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 98.114] (--) evdev: Power Button: Found keys
[ 98.114] (II) evdev: Power Button: Configuring as keyboard
[ 98.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 98.114] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 98.114] (**) Option "xkb_rules" "evdev"
[ 98.114] (**) Option "xkb_model" "pc104"
[ 98.114] (**) Option "xkb_layout" "gb"
[ 98.130] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 98.131] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 98.131] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 98.131] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 98.131] (II) Using input driver 'evdev' for 'Power Button'
[ 98.131] (**) Power Button: always reports core events
[ 98.131] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 98.131] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 98.131] (--) evdev: Power Button: Found keys
[ 98.131] (II) evdev: Power Button: Configuring as keyboard
[ 98.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 98.131] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 98.131] (**) Option "xkb_rules" "evdev"
[ 98.131] (**) Option "xkb_model" "pc104"
[ 98.131] (**) Option "xkb_layout" "gb"
[ 98.131] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 98.131] (II) config/udev: Adding input device HDA NVidia HDMI (/dev/input/event12)
[ 98.131] (II) No input driver specified, ignoring this device.
[ 98.131] (II) This device may have been added with another device file.
[ 98.131] (II) config/udev: Adding input device CH PRODUCTS CH FLIGHT SIM YOKE USB (/dev/input/event1)
[ 98.131] (II) No input driver specified, ignoring this device.
[ 98.131] (II) This device may have been added with another device file.
[ 98.131] (II) config/udev: Adding input device CH PRODUCTS CH FLIGHT SIM YOKE USB (/dev/input/js0)
[ 98.131] (II) No input driver specified, ignoring this device.
[ 98.131] (II) This device may have been added with another device file.
[ 98.132] (II) config/udev: Adding input device HD Pro Webcam C920 (/dev/input/event14)
[ 98.132] (**) HD Pro Webcam C920: Applying InputClass "evdev keyboard catchall"
[ 98.132] (**) HD Pro Webcam C920: Applying InputClass "evdev keyboard catchall"
[ 98.132] (**) HD Pro Webcam C920: Applying InputClass "LocalKeyboard"
[ 98.132] (II) Using input driver 'evdev' for 'HD Pro Webcam C920'
[ 98.132] (**) HD Pro Webcam C920: always reports core events
[ 98.132] (**) evdev: HD Pro Webcam C920: Device: "/dev/input/event14"
[ 98.132] (--) evdev: HD Pro Webcam C920: Vendor 0x46d Product 0x82d
[ 98.132] (--) evdev: HD Pro Webcam C920: Found keys
[ 98.132] (II) evdev: HD Pro Webcam C920: Configuring as keyboard
[ 98.132] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.0/input/input14/event14"
[ 98.132] (II) XINPUT: Adding extended input device "HD Pro Webcam C920" (type: KEYBOARD, id 8)
[ 98.132] (**) Option "xkb_rules" "evdev"
[ 98.132] (**) Option "xkb_model" "pc104"
[ 98.132] (**) Option "xkb_layout" "gb"
[ 98.132] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event5)
[ 98.132] (II) No input driver specified, ignoring this device.
[ 98.132] (II) This device may have been added with another device file.
[ 98.132] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event4)
[ 98.132] (II) No input driver specified, ignoring this device.
[ 98.132] (II) This device may have been added with another device file.
[ 98.132] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event11)
[ 98.132] (II) No input driver specified, ignoring this device.
[ 98.132] (II) This device may have been added with another device file.
[ 98.133] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
[ 98.133] (II) No input driver specified, ignoring this device.
[ 98.133] (II) This device may have been added with another device file.
[ 98.133] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
[ 98.133] (II) No input driver specified, ignoring this device.
[ 98.133] (II) This device may have been added with another device file.
[ 98.133] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event8)
[ 98.133] (II) No input driver specified, ignoring this device.
[ 98.133] (II) This device may have been added with another device file.
[ 98.133] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event7)
[ 98.133] (II) No input driver specified, ignoring this device.
[ 98.133] (II) This device may have been added with another device file.
[ 98.133] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event6)
[ 98.133] (II) No input driver specified, ignoring this device.
[ 98.133] (II) This device may have been added with another device file.
[ 98.133] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event13)
[ 98.133] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 98.133] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 98.133] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 98.133] (**) Logitech Trackball: always reports core events
[ 98.133] (**) evdev: Logitech Trackball: Device: "/dev/input/event13"
[ 98.133] (--) evdev: Logitech Trackball: Vendor 0x46d Product 0xc404
[ 98.133] (--) evdev: Logitech Trackball: Found 9 mouse buttons
[ 98.133] (--) evdev: Logitech Trackball: Found scroll wheel(s)
[ 98.133] (--) evdev: Logitech Trackball: Found relative axes
[ 98.133] (--) evdev: Logitech Trackball: Found x and y relative axes
[ 98.134] (II) evdev: Logitech Trackball: Configuring as mouse
[ 98.134] (II) evdev: Logitech Trackball: Adding scrollwheel support
[ 98.134] (**) evdev: Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 98.134] (**) evdev: Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 98.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.0/input/input13/event13"
[ 98.134] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE, id 9)
[ 98.134] (II) evdev: Logitech Trackball: initialized for relative axes.
[ 98.134] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 98.134] (**) Logitech Trackball: (accel) acceleration profile 0
[ 98.134] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 98.134] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 98.134] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 98.134] (II) No input driver specified, ignoring this device.
[ 98.134] (II) This device may have been added with another device file.
[ 98.134] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 98.134] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 98.134] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 98.134] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 98.134] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 98.134] (**) AT Translated Set 2 keyboard: always reports core events
[ 98.134] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 98.134] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 98.134] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 98.134] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 98.134] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 98.134] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 98.134] (**) Option "xkb_rules" "evdev"
[ 98.134] (**) Option "xkb_model" "pc104"
[ 98.134] (**) Option "xkb_layout" "gb"
[ 120.452] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1941
[ 120.452] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 120.452] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 120.452] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 120.452] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 120.452] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 120.452] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 126.549] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1941
[ 126.549] (II) NOUVEAU(0): Using hsync ranges from config file
[ 126.549] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 126.549] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 126.549] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 126.549] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 126.549] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2014-01-01 0:55 ` Ilia Mirkin
2014-01-01 1:44 ` Sid Boyce
@ 2014-01-01 14:04 ` Sid Boyce
2014-01-01 18:46 ` Ilia Mirkin
1 sibling, 1 reply; 11+ messages in thread
From: Sid Boyce @ 2014-01-01 14:04 UTC (permalink / raw)
To: Ilia Mirkin
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
[-- Attachment #1: Type: text/plain, Size: 3610 bytes --]
On 01/01/14 00:55, Ilia Mirkin wrote:
> On Tue, Dec 31, 2013 at 7:41 PM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>> On 31/12/13 10:36, Ilia Mirkin wrote:
>>> On Tue, Dec 31, 2013 at 5:14 AM, Sid Boyce <sboyce@blueyonder.co.uk>
>>> wrote:
>>>> System x86_64 with openSUSE 13.1.
>>>> X.Org version: 1.14.99.905
>>>>
>>>> openSUSE 12.2 kernels boot successfully into a graphical screen, login to
>>>> KDE4, etc. all normal.
>>>>
>>>> 3.13-rc kernels boot fully with X running but no graphical screen and it
>>>> freezes in VC with not all the startup messages displayed but I could ssh
>>>> in
>>>> from another box to check dmesg and logs.
>>>>
>>>> Xorg.0.log which I thought I had saved did not log an error.
>>>>
>>>> dmesg said "nouveau Playlist update failed".
>>>>
>>>> Changed the GeForce GT 560 Ti for a GeForce 8600 GT and 3.13.0-rc6 is up
>>>> and
>>>> running.
>>>>
>>>> If necessary I can go back to the GT 560 Ti to gather dmesg and Xorg log
>>>> information.
>>> Having a dmesg would be nice. One thing I can think of off-hand is
>>> that 3.13-rc has MSI turned on by default. You can turn it off by
>>> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
>>> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
>>> show the offending commit fairly quickly.
>>>
>>> -ilia
>>>
>> Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
>> So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8 introduced
>> it.
> Any chance you might mmiotrace the blob (version 325 or later) to see
> which registers it fiddles with? Or alternatively, if you have a NVCE
> card (you never did end up providing the logs which would have made
> that apparent), could you try replacing nvc3_mc_oclass with
> nvc0_mc_oclass for the 0xce case in
> drivers/gpu/drm/nouveau/core/engine/device/nvc0.c? (and boot without
> the MSI disabling.) The switch has already been made for NVC8 in
> 0bae1d61c75 -- perhaps there are more "odd" ones.
>
> -ilia
>
Fails exactly the same.
case 0xc3:
device->cname = "GF106";
device->oclass[NVDEV_SUBDEV_VBIOS ] =
&nouveau_bios_oclass;
device->oclass[NVDEV_SUBDEV_GPIO ] = &nv50_gpio_oclass;
device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass;
device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass;
device->oclass[NVDEV_SUBDEV_THERM ] = &nva3_therm_oclass;
device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
device->oclass[NVDEV_SUBDEV_DEVINIT] =
&nvc0_devinit_oclass;
device->oclass[NVDEV_SUBDEV_MC ] =
nvc0_mc_oclass; <<<<<====
device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
The dmesg and Xorg.0.log with the problem captured across a ssh link.
# ps fax|grep X
5633 pts/0 S+ 0:00 \_ grep --color=auto X
5160 tty7 Ss+ 0:08 \_ /usr/bin/Xorg -br :0 vt7 -nolisten tcp
-auth /var/lib/kdm/AuthFiles/A:0-yqspza
Also
# echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
-bash: echo: write error: Invalid argument.
# ls -l /sys/kernel/debug/tracing/current_tracer
-rw-r--r-- 1 root root 0 Jan 1 14:00
/sys/kernel/debug/tracing/current_tracer
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
[-- Attachment #2: dmesg.gz --]
[-- Type: application/x-gzip, Size: 20023 bytes --]
[-- Attachment #3: Xorg.0.log --]
[-- Type: text/x-log, Size: 40215 bytes --]
[ 102.323]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 102.323]
X.Org X Server 1.14.99.905 (1.15.0 RC 5)
Release Date: 2013-12-19
[ 102.323] X Protocol Version 11, Revision 0
[ 102.323] Build Operating System: openSUSE SUSE LINUX
[ 102.323] Current Operating System: Linux slipstream 3.13.0-rc61-smp+ #1 SMP PREEMPT Wed Jan 1 13:20:30 GMT 2014 x86_64
[ 102.323] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-rc61-smp+ root=UUID=9e02a4c0-c401-4874-a706-30ec3f0a98aa quiet splash
[ 102.323] Build Date: 22 December 2013 07:18:32PM
[ 102.323]
[ 102.323] Current version of pixman: 0.32.4
[ 102.323] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 102.323] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 102.323] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 1 13:25:36 2014
[ 102.323] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 102.323] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 102.324] (==) No Layout section. Using the first Screen section.
[ 102.324] (==) No screen section available. Using defaults.
[ 102.324] (**) |-->Screen "Default Screen Section" (0)
[ 102.324] (**) | |-->Monitor "<default monitor>"
[ 102.324] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 102.324] (==) Automatically adding devices
[ 102.324] (==) Automatically enabling devices
[ 102.324] (==) Automatically adding GPU devices
[ 102.324] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 102.324] Entry deleted from font path.
[ 102.324] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 102.324] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 102.324] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 102.324] (II) Loader magic: 0x80ac60
[ 102.324] (II) Module ABI versions:
[ 102.324] X.Org ANSI C Emulation: 0.4
[ 102.324] X.Org Video Driver: 15.0
[ 102.324] X.Org XInput driver : 20.0
[ 102.324] X.Org Server Extension : 8.0
[ 102.324] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 102.326] (--) PCI:*(0:1:0:0) 10de:1200:1043:838b rev 161, Mem @ 0xf8000000/33554432, 0xd0000000/134217728, 0xdc000000/67108864, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[ 102.326] Initializing built-in extension Generic Event Extension
[ 102.326] Initializing built-in extension SHAPE
[ 102.326] Initializing built-in extension MIT-SHM
[ 102.326] Initializing built-in extension XInputExtension
[ 102.326] Initializing built-in extension XTEST
[ 102.326] Initializing built-in extension BIG-REQUESTS
[ 102.326] Initializing built-in extension SYNC
[ 102.326] Initializing built-in extension XKEYBOARD
[ 102.326] Initializing built-in extension XC-MISC
[ 102.326] Initializing built-in extension SECURITY
[ 102.326] Initializing built-in extension XINERAMA
[ 102.326] Initializing built-in extension XFIXES
[ 102.326] Initializing built-in extension RENDER
[ 102.326] Initializing built-in extension RANDR
[ 102.326] Initializing built-in extension COMPOSITE
[ 102.326] Initializing built-in extension DAMAGE
[ 102.326] Initializing built-in extension MIT-SCREEN-SAVER
[ 102.326] Initializing built-in extension DOUBLE-BUFFER
[ 102.326] Initializing built-in extension RECORD
[ 102.326] Initializing built-in extension DPMS
[ 102.326] Initializing built-in extension Present
[ 102.326] Initializing built-in extension DRI3
[ 102.326] Initializing built-in extension X-Resource
[ 102.326] Initializing built-in extension XVideo
[ 102.326] Initializing built-in extension XVideo-MotionCompensation
[ 102.326] Initializing built-in extension XFree86-VidModeExtension
[ 102.326] Initializing built-in extension XFree86-DGA
[ 102.326] Initializing built-in extension XFree86-DRI
[ 102.326] Initializing built-in extension DRI2
[ 102.326] (II) LoadModule: "glx"
[ 102.389] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 102.390] (II) Module glx: vendor="X.Org Foundation"
[ 102.390] compiled for 1.14.99.905, module version = 1.0.0
[ 102.390] ABI class: X.Org Server Extension, version 8.0
[ 102.390] (==) AIGLX enabled
[ 102.390] Loading extension GLX
[ 102.390] (==) Matched nvidia as autoconfigured driver 0
[ 102.390] (==) Matched nouveau as autoconfigured driver 1
[ 102.390] (==) Matched nv as autoconfigured driver 2
[ 102.390] (==) Matched nvidia as autoconfigured driver 3
[ 102.390] (==) Matched nouveau as autoconfigured driver 4
[ 102.390] (==) Matched nv as autoconfigured driver 5
[ 102.390] (==) Matched modesetting as autoconfigured driver 6
[ 102.390] (==) Matched fbdev as autoconfigured driver 7
[ 102.390] (==) Matched vesa as autoconfigured driver 8
[ 102.390] (==) Assigned the driver to the xf86ConfigLayout
[ 102.390] (II) LoadModule: "nvidia"
[ 102.400] (WW) Warning, couldn't open module nvidia
[ 102.400] (II) UnloadModule: "nvidia"
[ 102.400] (II) Unloading nvidia
[ 102.400] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 102.400] (II) LoadModule: "nouveau"
[ 102.400] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 102.401] (II) Module nouveau: vendor="X.Org Foundation"
[ 102.401] compiled for 1.14.99.904, module version = 1.0.10
[ 102.401] Module class: X.Org Video Driver
[ 102.401] ABI class: X.Org Video Driver, version 15.0
[ 102.401] (II) LoadModule: "nv"
[ 102.401] (WW) Warning, couldn't open module nv
[ 102.401] (II) UnloadModule: "nv"
[ 102.401] (II) Unloading nv
[ 102.401] (EE) Failed to load module "nv" (module does not exist, 0)
[ 102.401] (II) LoadModule: "modesetting"
[ 102.401] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 102.401] (II) Module modesetting: vendor="X.Org Foundation"
[ 102.401] compiled for 1.14.99.904, module version = 0.8.0
[ 102.401] Module class: X.Org Video Driver
[ 102.401] ABI class: X.Org Video Driver, version 15.0
[ 102.401] (II) LoadModule: "fbdev"
[ 102.401] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 102.401] (II) Module fbdev: vendor="X.Org Foundation"
[ 102.401] compiled for 1.14.99.904, module version = 0.4.4
[ 102.402] Module class: X.Org Video Driver
[ 102.402] ABI class: X.Org Video Driver, version 15.0
[ 102.402] (II) LoadModule: "vesa"
[ 102.402] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 102.402] (II) Module vesa: vendor="X.Org Foundation"
[ 102.402] compiled for 1.14.99.904, module version = 2.3.3
[ 102.402] Module class: X.Org Video Driver
[ 102.402] ABI class: X.Org Video Driver, version 15.0
[ 102.402] (II) NOUVEAU driver
[ 102.402] (II) NOUVEAU driver for NVIDIA chipset families :
[ 102.402] RIVA TNT (NV04)
[ 102.402] RIVA TNT2 (NV05)
[ 102.402] GeForce 256 (NV10)
[ 102.402] GeForce 2 (NV11, NV15)
[ 102.402] GeForce 4MX (NV17, NV18)
[ 102.402] GeForce 3 (NV20)
[ 102.402] GeForce 4Ti (NV25, NV28)
[ 102.402] GeForce FX (NV3x)
[ 102.402] GeForce 6 (NV4x)
[ 102.402] GeForce 7 (G7x)
[ 102.402] GeForce 8 (G8x)
[ 102.402] GeForce GTX 200 (NVA0)
[ 102.402] GeForce GTX 400 (NVC0)
[ 102.402] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 102.402] (II) FBDEV: driver for framebuffer: fbdev
[ 102.402] (II) VESA: driver for VESA chipsets: vesa
[ 102.402] (++) using VT number 7
[ 102.402] (II) [drm] nouveau interface version: 1.1.1
[ 102.402] (WW) Falling back to old probe method for modesetting
[ 102.403] (WW) Falling back to old probe method for fbdev
[ 102.403] (II) Loading sub module "fbdevhw"
[ 102.403] (II) LoadModule: "fbdevhw"
[ 102.403] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 102.403] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 102.403] compiled for 1.14.99.905, module version = 0.0.2
[ 102.403] ABI class: X.Org Video Driver, version 15.0
[ 102.403] (WW) Falling back to old probe method for vesa
[ 102.403] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 102.403] (II) Loading sub module "dri2"
[ 102.403] (II) LoadModule: "dri2"
[ 102.403] (II) Module "dri2" already built-in
[ 102.403] (--) NOUVEAU(0): Chipset: "NVIDIA NVCE"
[ 102.403] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 102.403] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 102.403] (==) NOUVEAU(0): RGB weight 888
[ 102.403] (==) NOUVEAU(0): Default visual is TrueColor
[ 102.403] (==) NOUVEAU(0): Using HW cursor
[ 102.403] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 102.403] (==) NOUVEAU(0): Page flipping enabled
[ 102.403] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 102.428] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 102.484] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 102.486] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 102.509] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 102.566] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 102.566] (II) NOUVEAU(0): Manufacturer: SAM Model: 795 Serial#: 1110590298
[ 102.566] (II) NOUVEAU(0): Year: 2012 Week: 6
[ 102.566] (II) NOUVEAU(0): EDID Version: 1.3
[ 102.566] (II) NOUVEAU(0): Digital Display Input
[ 102.566] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 102.566] (II) NOUVEAU(0): Gamma: 2.20
[ 102.566] (II) NOUVEAU(0): DPMS capabilities: Off
[ 102.566] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 102.566] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 102.566] (II) NOUVEAU(0): redX: 0.641 redY: 0.338 greenX: 0.315 greenY: 0.629
[ 102.566] (II) NOUVEAU(0): blueX: 0.159 blueY: 0.059 whiteX: 0.312 whiteY: 0.329
[ 102.566] (II) NOUVEAU(0): Supported established timings:
[ 102.566] (II) NOUVEAU(0): 720x400@70Hz
[ 102.566] (II) NOUVEAU(0): 640x480@60Hz
[ 102.566] (II) NOUVEAU(0): 640x480@67Hz
[ 102.566] (II) NOUVEAU(0): 640x480@72Hz
[ 102.566] (II) NOUVEAU(0): 640x480@75Hz
[ 102.566] (II) NOUVEAU(0): 800x600@56Hz
[ 102.566] (II) NOUVEAU(0): 800x600@60Hz
[ 102.566] (II) NOUVEAU(0): 800x600@72Hz
[ 102.566] (II) NOUVEAU(0): 800x600@75Hz
[ 102.566] (II) NOUVEAU(0): 832x624@75Hz
[ 102.566] (II) NOUVEAU(0): 1024x768@60Hz
[ 102.566] (II) NOUVEAU(0): 1024x768@70Hz
[ 102.566] (II) NOUVEAU(0): 1024x768@75Hz
[ 102.566] (II) NOUVEAU(0): 1280x1024@75Hz
[ 102.566] (II) NOUVEAU(0): 1152x864@75Hz
[ 102.566] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 102.566] (II) NOUVEAU(0): Supported standard timings:
[ 102.566] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 102.566] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 102.566] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 102.566] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 102.566] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 102.566] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 102.566] (II) NOUVEAU(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 102.566] (II) NOUVEAU(0): #7: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 102.566] (II) NOUVEAU(0): Supported detailed timing:
[ 102.566] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 102.566] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 102.566] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 102.566] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 102.566] (II) NOUVEAU(0): Monitor name: SA300/SA350
[ 102.566] (II) NOUVEAU(0): Serial No: H4XC205202
[ 102.566] (II) NOUVEAU(0): Supported detailed timing:
[ 102.566] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 102.566] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 102.566] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 102.566] (II) NOUVEAU(0): Supported detailed timing:
[ 102.566] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 102.566] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 102.566] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 102.566] (II) NOUVEAU(0): Supported detailed timing:
[ 102.566] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 102.566] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 102.566] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 102.566] (II) NOUVEAU(0): Supported detailed timing:
[ 102.566] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 102.566] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 102.566] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 102.566] (II) NOUVEAU(0): Supported detailed timing:
[ 102.566] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 102.566] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 102.566] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 102.566] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 102.566] (II) NOUVEAU(0): EDID (in hex):
[ 102.566] (II) NOUVEAU(0): 00ffffffffffff004c2d95075a433242
[ 102.566] (II) NOUVEAU(0): 0616010380341d782a2cc1a45650a128
[ 102.566] (II) NOUVEAU(0): 0f5054bfef808100814081809500a940
[ 102.566] (II) NOUVEAU(0): b300714f950f023a801871382d40582c
[ 102.566] (II) NOUVEAU(0): 450009252100001e000000fd00384b1e
[ 102.566] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 102.566] (II) NOUVEAU(0): 413330302f53413335300a20000000ff
[ 102.566] (II) NOUVEAU(0): 00483458433230353230320a20200176
[ 102.566] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
[ 102.566] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
[ 102.566] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
[ 102.566] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
[ 102.566] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
[ 102.566] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
[ 102.566] (II) NOUVEAU(0): 00000000000000000000000000000000
[ 102.566] (II) NOUVEAU(0): 0000000000000000000000000000005e
[ 102.566] (II) NOUVEAU(0): Printing probed modes for output DVI-I-2
[ 102.566] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 102.566] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 102.566] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 102.566] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 102.566] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 102.566] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 102.566] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 102.567] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 102.569] (II) NOUVEAU(0): EDID for output HDMI-1
[ 102.569] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 102.569] (II) NOUVEAU(0): Output DVI-I-2 connected
[ 102.569] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 102.569] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 102.569] (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1920x1080
[ 102.569] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 102.569] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 102.569] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 102.569] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 56.2 kHz, 50.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1920x1080": 148.4 MHz (scaled from 0.0 MHz), 67.4 kHz, 59.9 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 59.9 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "720x576": 27.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 102.569] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 102.569] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 102.569] (==) NOUVEAU(0): DPI set to (96, 96)
[ 102.569] (II) Loading sub module "fb"
[ 102.569] (II) LoadModule: "fb"
[ 102.570] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 102.570] (II) Module fb: vendor="X.Org Foundation"
[ 102.570] compiled for 1.14.99.905, module version = 1.0.0
[ 102.570] ABI class: X.Org ANSI C Emulation, version 0.4
[ 102.570] (II) Loading sub module "exa"
[ 102.570] (II) LoadModule: "exa"
[ 102.570] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 102.570] (II) Module exa: vendor="X.Org Foundation"
[ 102.570] compiled for 1.14.99.905, module version = 2.6.0
[ 102.570] ABI class: X.Org Video Driver, version 15.0
[ 102.570] (II) Loading sub module "shadowfb"
[ 102.570] (II) LoadModule: "shadowfb"
[ 102.570] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 102.570] (II) Module shadowfb: vendor="X.Org Foundation"
[ 102.570] compiled for 1.14.99.905, module version = 1.0.0
[ 102.570] ABI class: X.Org ANSI C Emulation, version 0.4
[ 102.570] (II) UnloadModule: "modesetting"
[ 102.570] (II) Unloading modesetting
[ 102.570] (II) UnloadModule: "fbdev"
[ 102.570] (II) Unloading fbdev
[ 102.570] (II) UnloadSubModule: "fbdevhw"
[ 102.570] (II) Unloading fbdevhw
[ 102.570] (II) UnloadModule: "vesa"
[ 102.570] (II) Unloading vesa
[ 102.570] (--) Depth 24 pixmap format is 32 bpp
[ 104.571] (II) NOUVEAU(0): Opened GPU channel 0
[ 104.574] (II) NOUVEAU(0): [DRI2] Setup complete
[ 104.574] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 104.574] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 104.574] (II) EXA(0): Driver allocated offscreen pixmaps
[ 104.574] (II) EXA(0): Driver registered support for the following operations:
[ 104.574] (II) Solid
[ 104.574] (II) Copy
[ 104.574] (II) Composite (RENDER acceleration)
[ 104.574] (II) UploadToScreen
[ 104.574] (II) DownloadFromScreen
[ 104.574] (==) NOUVEAU(0): Backing store enabled
[ 104.574] (==) NOUVEAU(0): Silken mouse enabled
[ 104.574] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 104.574] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 104.574] (==) NOUVEAU(0): DPMS enabled
[ 104.574] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 104.575] (--) RandR disabled
[ 106.594] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 106.594] (II) AIGLX: enabled GLX_ARB_create_context
[ 106.594] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 106.594] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 106.594] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 106.594] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 106.594] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 106.594] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 106.594] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 106.595] (II) AIGLX: Loaded and initialized nouveau
[ 106.595] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 121.595] (II) NOUVEAU(0): NVEnterVT is called.
[ 125.595] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 125.595] resize called 1920 1080
[ 125.639] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 125.639] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 125.639] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 125.639] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 125.639] (II) LoadModule: "evdev"
[ 125.639] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 125.639] (II) Module evdev: vendor="X.Org Foundation"
[ 125.639] compiled for 1.14.99.905, module version = 2.8.2
[ 125.639] Module class: X.Org XInput Driver
[ 125.639] ABI class: X.Org XInput driver, version 20.0
[ 125.639] (II) Using input driver 'evdev' for 'Power Button'
[ 125.639] (**) Power Button: always reports core events
[ 125.639] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 125.639] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 125.639] (--) evdev: Power Button: Found keys
[ 125.639] (II) evdev: Power Button: Configuring as keyboard
[ 125.639] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 125.639] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 125.639] (**) Option "xkb_rules" "evdev"
[ 125.639] (**) Option "xkb_model" "pc104"
[ 125.639] (**) Option "xkb_layout" "gb"
[ 125.656] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 125.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 125.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 125.656] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 125.656] (II) Using input driver 'evdev' for 'Power Button'
[ 125.656] (**) Power Button: always reports core events
[ 125.656] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 125.656] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 125.656] (--) evdev: Power Button: Found keys
[ 125.656] (II) evdev: Power Button: Configuring as keyboard
[ 125.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 125.656] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 125.656] (**) Option "xkb_rules" "evdev"
[ 125.656] (**) Option "xkb_model" "pc104"
[ 125.656] (**) Option "xkb_layout" "gb"
[ 125.656] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 125.657] (II) config/udev: Adding input device HDA NVidia HDMI (/dev/input/event13)
[ 125.657] (II) No input driver specified, ignoring this device.
[ 125.657] (II) This device may have been added with another device file.
[ 125.657] (II) config/udev: Adding input device CH PRODUCTS CH FLIGHT SIM YOKE USB (/dev/input/event1)
[ 125.657] (II) No input driver specified, ignoring this device.
[ 125.657] (II) This device may have been added with another device file.
[ 125.657] (II) config/udev: Adding input device CH PRODUCTS CH FLIGHT SIM YOKE USB (/dev/input/js0)
[ 125.657] (II) No input driver specified, ignoring this device.
[ 125.657] (II) This device may have been added with another device file.
[ 125.657] (II) config/udev: Adding input device HD Pro Webcam C920 (/dev/input/event14)
[ 125.657] (**) HD Pro Webcam C920: Applying InputClass "evdev keyboard catchall"
[ 125.657] (**) HD Pro Webcam C920: Applying InputClass "evdev keyboard catchall"
[ 125.657] (**) HD Pro Webcam C920: Applying InputClass "LocalKeyboard"
[ 125.657] (II) Using input driver 'evdev' for 'HD Pro Webcam C920'
[ 125.657] (**) HD Pro Webcam C920: always reports core events
[ 125.657] (**) evdev: HD Pro Webcam C920: Device: "/dev/input/event14"
[ 125.657] (--) evdev: HD Pro Webcam C920: Vendor 0x46d Product 0x82d
[ 125.657] (--) evdev: HD Pro Webcam C920: Found keys
[ 125.657] (II) evdev: HD Pro Webcam C920: Configuring as keyboard
[ 125.657] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb6/6-5/6-5:1.0/input/input14/event14"
[ 125.657] (II) XINPUT: Adding extended input device "HD Pro Webcam C920" (type: KEYBOARD, id 8)
[ 125.657] (**) Option "xkb_rules" "evdev"
[ 125.657] (**) Option "xkb_model" "pc104"
[ 125.657] (**) Option "xkb_layout" "gb"
[ 125.658] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event7)
[ 125.658] (II) No input driver specified, ignoring this device.
[ 125.658] (II) This device may have been added with another device file.
[ 125.658] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event6)
[ 125.658] (II) No input driver specified, ignoring this device.
[ 125.658] (II) This device may have been added with another device file.
[ 125.658] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event5)
[ 125.658] (II) No input driver specified, ignoring this device.
[ 125.658] (II) This device may have been added with another device file.
[ 125.658] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event12)
[ 125.658] (II) No input driver specified, ignoring this device.
[ 125.658] (II) This device may have been added with another device file.
[ 125.658] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event11)
[ 125.658] (II) No input driver specified, ignoring this device.
[ 125.658] (II) This device may have been added with another device file.
[ 125.658] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event10)
[ 125.658] (II) No input driver specified, ignoring this device.
[ 125.658] (II) This device may have been added with another device file.
[ 125.658] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[ 125.658] (II) No input driver specified, ignoring this device.
[ 125.658] (II) This device may have been added with another device file.
[ 125.659] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event8)
[ 125.659] (II) No input driver specified, ignoring this device.
[ 125.659] (II) This device may have been added with another device file.
[ 125.659] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event4)
[ 125.659] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 125.659] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
[ 125.659] (II) Using input driver 'evdev' for 'Logitech Trackball'
[ 125.659] (**) Logitech Trackball: always reports core events
[ 125.659] (**) evdev: Logitech Trackball: Device: "/dev/input/event4"
[ 125.659] (--) evdev: Logitech Trackball: Vendor 0x46d Product 0xc404
[ 125.659] (--) evdev: Logitech Trackball: Found 9 mouse buttons
[ 125.659] (--) evdev: Logitech Trackball: Found scroll wheel(s)
[ 125.659] (--) evdev: Logitech Trackball: Found relative axes
[ 125.659] (--) evdev: Logitech Trackball: Found x and y relative axes
[ 125.659] (II) evdev: Logitech Trackball: Configuring as mouse
[ 125.659] (II) evdev: Logitech Trackball: Adding scrollwheel support
[ 125.659] (**) evdev: Logitech Trackball: YAxisMapping: buttons 4 and 5
[ 125.659] (**) evdev: Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 125.659] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb11/11-1/11-1:1.0/input/input4/event4"
[ 125.659] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE, id 9)
[ 125.659] (II) evdev: Logitech Trackball: initialized for relative axes.
[ 125.659] (**) Logitech Trackball: (accel) keeping acceleration scheme 1
[ 125.659] (**) Logitech Trackball: (accel) acceleration profile 0
[ 125.659] (**) Logitech Trackball: (accel) acceleration factor: 2.000
[ 125.659] (**) Logitech Trackball: (accel) acceleration threshold: 4
[ 125.659] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
[ 125.659] (II) No input driver specified, ignoring this device.
[ 125.659] (II) This device may have been added with another device file.
[ 125.659] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 125.659] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 125.659] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 125.659] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 125.659] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 125.659] (**) AT Translated Set 2 keyboard: always reports core events
[ 125.659] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 125.659] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 125.659] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 125.659] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 125.659] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 125.659] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 125.659] (**) Option "xkb_rules" "evdev"
[ 125.659] (**) Option "xkb_model" "pc104"
[ 125.659] (**) Option "xkb_layout" "gb"
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2014-01-01 14:04 ` Sid Boyce
@ 2014-01-01 18:46 ` Ilia Mirkin
2014-01-02 2:36 ` Sid Boyce
0 siblings, 1 reply; 11+ messages in thread
From: Ilia Mirkin @ 2014-01-01 18:46 UTC (permalink / raw)
To: sboyce
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
On Wed, Jan 1, 2014 at 9:04 AM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
> On 01/01/14 00:55, Ilia Mirkin wrote:
>>
>> On Tue, Dec 31, 2013 at 7:41 PM, Sid Boyce <sboyce@blueyonder.co.uk>
>> wrote:
>>>
>>> On 31/12/13 10:36, Ilia Mirkin wrote:
>>>> Having a dmesg would be nice. One thing I can think of off-hand is
>>>> that 3.13-rc has MSI turned on by default. You can turn it off by
>>>> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
>>>> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
>>>> show the offending commit fairly quickly.
>>>>
>>>> -ilia
>>>>
>>> Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
>>> So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8
>>> introduced
>>> it.
>>
>> Any chance you might mmiotrace the blob (version 325 or later) to see
>> which registers it fiddles with? Or alternatively, if you have a NVCE
>> card (you never did end up providing the logs which would have made
>> that apparent), could you try replacing nvc3_mc_oclass with
>> nvc0_mc_oclass for the 0xce case in
>> drivers/gpu/drm/nouveau/core/engine/device/nvc0.c? (and boot without
>> the MSI disabling.) The switch has already been made for NVC8 in
>> 0bae1d61c75 -- perhaps there are more "odd" ones.
>>
>> -ilia
>>
> Fails exactly the same.
> case 0xc3:
> device->cname = "GF106";
>
> device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass;
> device->oclass[NVDEV_SUBDEV_GPIO ] = &nv50_gpio_oclass;
> device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass;
> device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass;
> device->oclass[NVDEV_SUBDEV_THERM ] = &nva3_therm_oclass;
> device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
> device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass;
> device->oclass[NVDEV_SUBDEV_MC ] = nvc0_mc_oclass;
> <<<<<====
> device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
> device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
That's the 0xc3 case... you have a nvce card, not nvc3 -- you would
need to change the NVDEV_SUBDEV_MC line to nvc0_mc_oclass for the 0xce
case.
>
> The dmesg and Xorg.0.log with the problem captured across a ssh link.
>
> # ps fax|grep X
> 5633 pts/0 S+ 0:00 \_ grep --color=auto X
> 5160 tty7 Ss+ 0:08 \_ /usr/bin/Xorg -br :0 vt7 -nolisten tcp -auth
> /var/lib/kdm/AuthFiles/A:0-yqspza
>
> Also
> # echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
> -bash: echo: write error: Invalid argument.
Take a look at https://wiki.ubuntu.com/X/MMIOTracing
-ilia
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2014-01-01 18:46 ` Ilia Mirkin
@ 2014-01-02 2:36 ` Sid Boyce
2014-01-02 2:40 ` Ilia Mirkin
0 siblings, 1 reply; 11+ messages in thread
From: Sid Boyce @ 2014-01-02 2:36 UTC (permalink / raw)
To: Ilia Mirkin
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
On 01/01/14 18:46, Ilia Mirkin wrote:
> On Wed, Jan 1, 2014 at 9:04 AM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>> On 01/01/14 00:55, Ilia Mirkin wrote:
>>> On Tue, Dec 31, 2013 at 7:41 PM, Sid Boyce <sboyce@blueyonder.co.uk>
>>> wrote:
>>>> On 31/12/13 10:36, Ilia Mirkin wrote:
>>>>> Having a dmesg would be nice. One thing I can think of off-hand is
>>>>> that 3.13-rc has MSI turned on by default. You can turn it off by
>>>>> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
>>>>> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
>>>>> show the offending commit fairly quickly.
>>>>>
>>>>> -ilia
>>>>>
>>>> Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
>>>> So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8
>>>> introduced
>>>> it.
>>> Any chance you might mmiotrace the blob (version 325 or later) to see
>>> which registers it fiddles with? Or alternatively, if you have a NVCE
>>> card (you never did end up providing the logs which would have made
>>> that apparent), could you try replacing nvc3_mc_oclass with
>>> nvc0_mc_oclass for the 0xce case in
>>> drivers/gpu/drm/nouveau/core/engine/device/nvc0.c? (and boot without
>>> the MSI disabling.) The switch has already been made for NVC8 in
>>> 0bae1d61c75 -- perhaps there are more "odd" ones.
>>>
>>> -ilia
>>>
>> Fails exactly the same.
>> case 0xc3:
>> device->cname = "GF106";
>>
>> device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass;
>> device->oclass[NVDEV_SUBDEV_GPIO ] = &nv50_gpio_oclass;
>> device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass;
>> device->oclass[NVDEV_SUBDEV_CLOCK ] = &nvc0_clock_oclass;
>> device->oclass[NVDEV_SUBDEV_THERM ] = &nva3_therm_oclass;
>> device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
>> device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass;
>> device->oclass[NVDEV_SUBDEV_MC ] = nvc0_mc_oclass;
>> <<<<<====
>> device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
>> device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
> That's the 0xc3 case... you have a nvce card, not nvc3 -- you would
> need to change the NVDEV_SUBDEV_MC line to nvc0_mc_oclass for the 0xce
> case.
>
>> The dmesg and Xorg.0.log with the problem captured across a ssh link.
>>
>> # ps fax|grep X
>> 5633 pts/0 S+ 0:00 \_ grep --color=auto X
>> 5160 tty7 Ss+ 0:08 \_ /usr/bin/Xorg -br :0 vt7 -nolisten tcp -auth
>> /var/lib/kdm/AuthFiles/A:0-yqspza
>>
>> Also
>> # echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
>> -bash: echo: write error: Invalid argument.
> Take a look at https://wiki.ubuntu.com/X/MMIOTracing
>
> -ilia
>
Of course it's a GF114.
Made the change and it boots without the command line change.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2014-01-02 2:36 ` Sid Boyce
@ 2014-01-02 2:40 ` Ilia Mirkin
2014-01-02 2:59 ` Sid Boyce
2014-01-02 14:58 ` [PATCH] Fix hang problem with GeForce GT 560 Ti and nouveau in 3.13-rc Sid Boyce
0 siblings, 2 replies; 11+ messages in thread
From: Ilia Mirkin @ 2014-01-02 2:40 UTC (permalink / raw)
To: sboyce
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
On Wed, Jan 1, 2014 at 9:36 PM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
> On 01/01/14 18:46, Ilia Mirkin wrote:
>>
>> On Wed, Jan 1, 2014 at 9:04 AM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>>>
>>> On 01/01/14 00:55, Ilia Mirkin wrote:
>>>>
>>>> On Tue, Dec 31, 2013 at 7:41 PM, Sid Boyce <sboyce@blueyonder.co.uk>
>>>> wrote:
>>>>>
>>>>> On 31/12/13 10:36, Ilia Mirkin wrote:
>>>>>>
>>>>>> Having a dmesg would be nice. One thing I can think of off-hand is
>>>>>> that 3.13-rc has MSI turned on by default. You can turn it off by
>>>>>> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
>>>>>> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
>>>>>> show the offending commit fairly quickly.
>>>>>>
>>>>>> -ilia
>>>>>>
>>>>> Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
>>>>> So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8
>>>>> introduced
>>>>> it.
>>>>
>>>> Any chance you might mmiotrace the blob (version 325 or later) to see
>>>> which registers it fiddles with? Or alternatively, if you have a NVCE
>>>> card (you never did end up providing the logs which would have made
>>>> that apparent), could you try replacing nvc3_mc_oclass with
>>>> nvc0_mc_oclass for the 0xce case in
>>>> drivers/gpu/drm/nouveau/core/engine/device/nvc0.c? (and boot without
>>>> the MSI disabling.) The switch has already been made for NVC8 in
>>>> 0bae1d61c75 -- perhaps there are more "odd" ones.
>>>>
>>>> -ilia
>>>>
>>> Fails exactly the same.
>>> case 0xc3:
>>> device->cname = "GF106";
>>>
>>> device->oclass[NVDEV_SUBDEV_VBIOS ] =
>>> &nouveau_bios_oclass;
>>> device->oclass[NVDEV_SUBDEV_GPIO ] =
>>> &nv50_gpio_oclass;
>>> device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass;
>>> device->oclass[NVDEV_SUBDEV_CLOCK ] =
>>> &nvc0_clock_oclass;
>>> device->oclass[NVDEV_SUBDEV_THERM ] =
>>> &nva3_therm_oclass;
>>> device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
>>> device->oclass[NVDEV_SUBDEV_DEVINIT] =
>>> &nvc0_devinit_oclass;
>>> device->oclass[NVDEV_SUBDEV_MC ] = nvc0_mc_oclass;
>>> <<<<<====
>>> device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
>>> device->oclass[NVDEV_SUBDEV_TIMER ] =
>>> &nv04_timer_oclass;
>>
>> That's the 0xc3 case... you have a nvce card, not nvc3 -- you would
>> need to change the NVDEV_SUBDEV_MC line to nvc0_mc_oclass for the 0xce
>> case.
>>
>>> The dmesg and Xorg.0.log with the problem captured across a ssh link.
>>>
>>> # ps fax|grep X
>>> 5633 pts/0 S+ 0:00 \_ grep --color=auto X
>>> 5160 tty7 Ss+ 0:08 \_ /usr/bin/Xorg -br :0 vt7 -nolisten tcp
>>> -auth
>>> /var/lib/kdm/AuthFiles/A:0-yqspza
>>>
>>> Also
>>> # echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
>>> -bash: echo: write error: Invalid argument.
>>
>> Take a look at https://wiki.ubuntu.com/X/MMIOTracing
>>
>> -ilia
>>
> Of course it's a GF114.
> Made the change and it boots without the command line change.
Great! Care to send a patch?
-ilia
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Possible 3.13-rc nouveau regression with GT 560 Ti
2014-01-02 2:40 ` Ilia Mirkin
@ 2014-01-02 2:59 ` Sid Boyce
2014-01-02 14:58 ` [PATCH] Fix hang problem with GeForce GT 560 Ti and nouveau in 3.13-rc Sid Boyce
1 sibling, 0 replies; 11+ messages in thread
From: Sid Boyce @ 2014-01-02 2:59 UTC (permalink / raw)
To: Ilia Mirkin
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
[-- Attachment #1: Type: text/plain, Size: 3568 bytes --]
On 02/01/14 02:40, Ilia Mirkin wrote:
> On Wed, Jan 1, 2014 at 9:36 PM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>> On 01/01/14 18:46, Ilia Mirkin wrote:
>>> On Wed, Jan 1, 2014 at 9:04 AM, Sid Boyce <sboyce@blueyonder.co.uk> wrote:
>>>> On 01/01/14 00:55, Ilia Mirkin wrote:
>>>>> On Tue, Dec 31, 2013 at 7:41 PM, Sid Boyce <sboyce@blueyonder.co.uk>
>>>>> wrote:
>>>>>> On 31/12/13 10:36, Ilia Mirkin wrote:
>>>>>>> Having a dmesg would be nice. One thing I can think of off-hand is
>>>>>>> that 3.13-rc has MSI turned on by default. You can turn it off by
>>>>>>> adding "nouveau.config=NvMSI=0" to your kernel cmdline. If that
>>>>>>> doesn't help, a bisect restricted to drivers/gpu/drm/nouveau should
>>>>>>> show the offending commit fairly quickly.
>>>>>>>
>>>>>>> -ilia
>>>>>>>
>>>>>> Adding "nouveau.config=NvMSI=0" to the command line fixed the problem.
>>>>>> So it looks like commit 049ffa8ab33a63b3bff672d1a0ee6a35ad253fe8
>>>>>> introduced
>>>>>> it.
>>>>> Any chance you might mmiotrace the blob (version 325 or later) to see
>>>>> which registers it fiddles with? Or alternatively, if you have a NVCE
>>>>> card (you never did end up providing the logs which would have made
>>>>> that apparent), could you try replacing nvc3_mc_oclass with
>>>>> nvc0_mc_oclass for the 0xce case in
>>>>> drivers/gpu/drm/nouveau/core/engine/device/nvc0.c? (and boot without
>>>>> the MSI disabling.) The switch has already been made for NVC8 in
>>>>> 0bae1d61c75 -- perhaps there are more "odd" ones.
>>>>>
>>>>> -ilia
>>>>>
>>>> Fails exactly the same.
>>>> case 0xc3:
>>>> device->cname = "GF106";
>>>>
>>>> device->oclass[NVDEV_SUBDEV_VBIOS ] =
>>>> &nouveau_bios_oclass;
>>>> device->oclass[NVDEV_SUBDEV_GPIO ] =
>>>> &nv50_gpio_oclass;
>>>> device->oclass[NVDEV_SUBDEV_I2C ] = &nv94_i2c_oclass;
>>>> device->oclass[NVDEV_SUBDEV_CLOCK ] =
>>>> &nvc0_clock_oclass;
>>>> device->oclass[NVDEV_SUBDEV_THERM ] =
>>>> &nva3_therm_oclass;
>>>> device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
>>>> device->oclass[NVDEV_SUBDEV_DEVINIT] =
>>>> &nvc0_devinit_oclass;
>>>> device->oclass[NVDEV_SUBDEV_MC ] = nvc0_mc_oclass;
>>>> <<<<<====
>>>> device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
>>>> device->oclass[NVDEV_SUBDEV_TIMER ] =
>>>> &nv04_timer_oclass;
>>> That's the 0xc3 case... you have a nvce card, not nvc3 -- you would
>>> need to change the NVDEV_SUBDEV_MC line to nvc0_mc_oclass for the 0xce
>>> case.
>>>
>>>> The dmesg and Xorg.0.log with the problem captured across a ssh link.
>>>>
>>>> # ps fax|grep X
>>>> 5633 pts/0 S+ 0:00 \_ grep --color=auto X
>>>> 5160 tty7 Ss+ 0:08 \_ /usr/bin/Xorg -br :0 vt7 -nolisten tcp
>>>> -auth
>>>> /var/lib/kdm/AuthFiles/A:0-yqspza
>>>>
>>>> Also
>>>> # echo mmiotrace > /sys/kernel/debug/tracing/current_tracer
>>>> -bash: echo: write error: Invalid argument.
>>> Take a look at https://wiki.ubuntu.com/X/MMIOTracing
>>>
>>> -ilia
>>>
>> Of course it's a GF114.
>> Made the change and it boots without the command line change.
> Great! Care to send a patch?
>
> -ilia
>
Here it is.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
[-- Attachment #2: GF114.diff --]
[-- Type: text/x-patch, Size: 738 bytes --]
--- /usr/src/linux-3.13.0-rc6/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c 2013-11-23 13:03:23.797604441 +0000
+++ /usr/src/linux-3.13.0-rc61/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c 2014-01-02 02:13:32.445643092 +0000
@@ -161,7 +161,7 @@
device->oclass[NVDEV_SUBDEV_THERM ] = &nva3_therm_oclass;
device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass;
- device->oclass[NVDEV_SUBDEV_MC ] = nvc3_mc_oclass;
+ device->oclass[NVDEV_SUBDEV_MC ] = nvc0_mc_oclass;
device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
device->oclass[NVDEV_SUBDEV_FB ] = nvc0_fb_oclass;
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH] Fix hang problem with GeForce GT 560 Ti and nouveau in 3.13-rc
2014-01-02 2:40 ` Ilia Mirkin
2014-01-02 2:59 ` Sid Boyce
@ 2014-01-02 14:58 ` Sid Boyce
1 sibling, 0 replies; 11+ messages in thread
From: Sid Boyce @ 2014-01-02 14:58 UTC (permalink / raw)
To: Ilia Mirkin
Cc: LKML Mailing List, opensuse factory list,
nouveau@lists.freedesktop.org
[-- Attachment #1: Type: text/plain, Size: 239 bytes --]
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
[-- Attachment #2: GF114_2.diff --]
[-- Type: text/x-patch, Size: 1397 bytes --]
This patch stops a console hang with VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
3.13-rc defines NVDEV_SUBDEV_MC as nvc3_mc_oclass, it needs to be defined as nvc0_mc_oclass
Signed off by: Sid Boyce (sboyce@blueyonder.co.uk)
Tested by: Sid Boyce (sboyce@blueyonder.co.uk)
---
drivers/gpu/drm/nouveau/core/engine/device/nvc0.c 1 -+
1 file changed, 1 insertion(+), 1 deletion(-)
INDEX: linux/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
=========================================================================
diff -up a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c
--- a/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c 2013-11-23 13:03:23.797604441 +0000
+++ b/drivers/gpu/drm/nouveau/core/engine/device/nvc0.c 2014-01-02 02:13:32.445643092 +0000
@@ -161,7 +161,7 @@ nvc0_identify(struct nouveau_device *dev
device->oclass[NVDEV_SUBDEV_THERM ] = &nva3_therm_oclass;
device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
device->oclass[NVDEV_SUBDEV_DEVINIT] = &nvc0_devinit_oclass;
- device->oclass[NVDEV_SUBDEV_MC ] = nvc3_mc_oclass;
+ device->oclass[NVDEV_SUBDEV_MC ] = nvc0_mc_oclass;
device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
device->oclass[NVDEV_SUBDEV_FB ] = nvc0_fb_oclass;
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2014-01-02 14:58 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-31 10:14 Possible 3.13-rc nouveau regression with GT 560 Ti Sid Boyce
2013-12-31 10:36 ` Ilia Mirkin
2014-01-01 0:41 ` Sid Boyce
2014-01-01 0:55 ` Ilia Mirkin
2014-01-01 1:44 ` Sid Boyce
2014-01-01 14:04 ` Sid Boyce
2014-01-01 18:46 ` Ilia Mirkin
2014-01-02 2:36 ` Sid Boyce
2014-01-02 2:40 ` Ilia Mirkin
2014-01-02 2:59 ` Sid Boyce
2014-01-02 14:58 ` [PATCH] Fix hang problem with GeForce GT 560 Ti and nouveau in 3.13-rc Sid Boyce
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox