Re: [PATCH] comedi: Humusoft MF634 and MF624 DAQ cards driver

[Ian Abbott <abbotti@mev.co.uk>]

On 2014-01-02 18:38, Hartley Sweeten wrote:
> On Monday, December 30, 2013 6:37 PM, Rostislav Lisovy wrote:
[snip]
>> +static int mf6x4_dio_insn_bits(struct comedi_device *dev,
>> +                            struct comedi_subdevice *s,
>> +                            struct comedi_insn *insn, unsigned int *data)
>> +{
>> +     struct mf6x4_private *devpriv = dev->private;
>> +
>> +     switch (s->type) {
>> +     case COMEDI_SUBD_DI: /* DIN */
>> +             data[1] = ioread16(devpriv->bar1_mem + MF6X4_DIN_reg) & MF6X4_DIN_mask;
>> +             break;
>> +
>> +     case COMEDI_SUBD_DO: /* DOUT */
>> +             /* data[0] -- mask
>> +                data[1] -- actual value */
>> +             if (data[0]) {
>> +                     s->state &= ~data[0];
>> +                     s->state |= (data[0] & data[1]);
>
> Please use comedi_dio_update_state() to handle this boilerplate code.
>
>> +
>> +                     iowrite16(s->state & MF6X4_DOUT_mask,
>> +                             devpriv->bar1_mem + MF6X4_DOUT_reg);
>> +
>> +                     data[1] = s->state;
>> +             }
>> +             break;
>> +     }
>> +
>> +     return insn->n;
>> +}
>
> Please split this function into a mf6x4_di_insn_bits() and mf6x4_do_insn_bits().
> That will remove an indent level and make the usage a bit clearer.

I'll also add that the `data[1] = s->state;` should be done even if 
data[0] is zero, i.e. it should be moved after the end of the `if` 
statement.

-- 
-=( Ian Abbott @ MEV Ltd.    E-mail: <abbotti@mev.co.uk>        )=-
-=( Tel: +44 (0)161 477 1898   FAX: +44 (0)161 718 3587         )=-