* 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL
@ 2013-12-03 21:33 Belisko Marek
2013-12-04 12:22 ` Roger Quadros
0 siblings, 1 reply; 6+ messages in thread
From: Belisko Marek @ 2013-12-03 21:33 UTC (permalink / raw)
To: LKML, linux-omap@vger.kernel.org, linux-arm-kernel
Hi,
current 3.13-rcX break usb support on gta04 board (similar to
beagleboard) when booting via board file.
In console we can see messages:
[ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
[ 5232.936096] omap_musb_mailbox: musb core is not yet ready
[ 5233.958160] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
[ 5235.058227] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
Any pointer what could cause that? (in 3.12 usb works fine)
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL
2013-12-03 21:33 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL Belisko Marek
@ 2013-12-04 12:22 ` Roger Quadros
2014-01-08 21:01 ` Belisko Marek
0 siblings, 1 reply; 6+ messages in thread
From: Roger Quadros @ 2013-12-04 12:22 UTC (permalink / raw)
To: Belisko Marek, LKML, linux-omap@vger.kernel.org, linux-arm-kernel,
ABRAHAM, KISHON VIJAY, Linux USB Mailing List
+Kishon
On 12/03/2013 11:33 PM, Belisko Marek wrote:
> Hi,
>
> current 3.13-rcX break usb support on gta04 board (similar to
> beagleboard) when booting via board file.
>
> In console we can see messages:
> [ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
> [ 5232.936096] omap_musb_mailbox: musb core is not yet ready
> [ 5233.958160] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
> [ 5235.058227] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>
> Any pointer what could cause that? (in 3.12 usb works fine)
>
> BR,
>
> marek
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL
2013-12-04 12:22 ` Roger Quadros
@ 2014-01-08 21:01 ` Belisko Marek
2014-01-09 5:24 ` Roger Quadros
0 siblings, 1 reply; 6+ messages in thread
From: Belisko Marek @ 2014-01-08 21:01 UTC (permalink / raw)
To: Roger Quadros
Cc: LKML, linux-omap@vger.kernel.org, linux-arm-kernel,
ABRAHAM, KISHON VIJAY, Linux USB Mailing List
Any pointers? Still present in 3.13-rc7.
On Wed, Dec 4, 2013 at 1:22 PM, Roger Quadros <rogerq@ti.com> wrote:
> +Kishon
>
> On 12/03/2013 11:33 PM, Belisko Marek wrote:
>> Hi,
>>
>> current 3.13-rcX break usb support on gta04 board (similar to
>> beagleboard) when booting via board file.
>>
>> In console we can see messages:
>> [ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>> [ 5232.936096] omap_musb_mailbox: musb core is not yet ready
>> [ 5233.958160] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>> [ 5235.058227] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>
>> Any pointer what could cause that? (in 3.12 usb works fine)
>>
>> BR,
>>
>> marek
>>
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL
2014-01-08 21:01 ` Belisko Marek
@ 2014-01-09 5:24 ` Roger Quadros
2014-01-10 5:25 ` Kishon Vijay Abraham I
0 siblings, 1 reply; 6+ messages in thread
From: Roger Quadros @ 2014-01-09 5:24 UTC (permalink / raw)
To: Belisko Marek, ABRAHAM, KISHON VIJAY
Cc: LKML, linux-omap@vger.kernel.org, linux-arm-kernel,
Linux USB Mailing List
Hi Marek,
I have no idea what is happening there. Have you tried using device tree boot?
Board file boot support would be dropped eventually.
Did you try if I2C read write to the twl4030 device works and all necessary clocks/supplies are
present?
Kishon, do you know what is causing the USB DPLL failure there?
cheers,
-roger
On 01/09/2014 02:31 AM, Belisko Marek wrote:
> Any pointers? Still present in 3.13-rc7.
>
> On Wed, Dec 4, 2013 at 1:22 PM, Roger Quadros <rogerq@ti.com> wrote:
>> +Kishon
>>
>> On 12/03/2013 11:33 PM, Belisko Marek wrote:
>>> Hi,
>>>
>>> current 3.13-rcX break usb support on gta04 board (similar to
>>> beagleboard) when booting via board file.
>>>
>>> In console we can see messages:
>>> [ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>> [ 5232.936096] omap_musb_mailbox: musb core is not yet ready
>>> [ 5233.958160] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>> [ 5235.058227] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>>
>>> Any pointer what could cause that? (in 3.12 usb works fine)
>>>
>>> BR,
>>>
>>> marek
>>>
>>
>
> BR,
>
> marek
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL
2014-01-09 5:24 ` Roger Quadros
@ 2014-01-10 5:25 ` Kishon Vijay Abraham I
2014-01-10 6:55 ` Belisko Marek
0 siblings, 1 reply; 6+ messages in thread
From: Kishon Vijay Abraham I @ 2014-01-10 5:25 UTC (permalink / raw)
To: Roger Quadros, Belisko Marek
Cc: LKML, linux-omap@vger.kernel.org, linux-arm-kernel,
Linux USB Mailing List
Hi,
On Thursday 09 January 2014 10:54 AM, Roger Quadros wrote:
> Hi Marek,
>
> I have no idea what is happening there. Have you tried using device tree boot?
> Board file boot support would be dropped eventually.
>
> Did you try if I2C read write to the twl4030 device works and all necessary clocks/supplies are
> present?
>
> Kishon, do you know what is causing the USB DPLL failure there?
Not sure what's causing those failures :-s
-Kishon
>
> cheers,
> -roger
>
> On 01/09/2014 02:31 AM, Belisko Marek wrote:
>> Any pointers? Still present in 3.13-rc7.
>>
>> On Wed, Dec 4, 2013 at 1:22 PM, Roger Quadros <rogerq@ti.com> wrote:
>>> +Kishon
>>>
>>> On 12/03/2013 11:33 PM, Belisko Marek wrote:
>>>> Hi,
>>>>
>>>> current 3.13-rcX break usb support on gta04 board (similar to
>>>> beagleboard) when booting via board file.
>>>>
>>>> In console we can see messages:
>>>> [ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>>> [ 5232.936096] omap_musb_mailbox: musb core is not yet ready
>>>> [ 5233.958160] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>>> [ 5235.058227] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>>>
>>>> Any pointer what could cause that? (in 3.12 usb works fine)
>>>>
>>>> BR,
>>>>
>>>> marek
>>>>
>>>
>>
>> BR,
>>
>> marek
>>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL
2014-01-10 5:25 ` Kishon Vijay Abraham I
@ 2014-01-10 6:55 ` Belisko Marek
0 siblings, 0 replies; 6+ messages in thread
From: Belisko Marek @ 2014-01-10 6:55 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Roger Quadros, LKML, linux-omap@vger.kernel.org, linux-arm-kernel,
Linux USB Mailing List
Hi,
On Fri, Jan 10, 2014 at 6:25 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
> Hi,
>
> On Thursday 09 January 2014 10:54 AM, Roger Quadros wrote:
>> Hi Marek,
>>
>> I have no idea what is happening there. Have you tried using device tree boot?
>> Board file boot support would be dropped eventually.
>>
>> Did you try if I2C read write to the twl4030 device works and all necessary clocks/supplies are
>> present?
>>
>> Kishon, do you know what is causing the USB DPLL failure there?
Issue was fixed. There was in 3.13-rc7 issue with unable to find phy
(phy was twl4030_usb). After that
issue is gone.
>
> Not sure what's causing those failures :-s
>
> -Kishon
>
>>
>> cheers,
>> -roger
>>
>> On 01/09/2014 02:31 AM, Belisko Marek wrote:
>>> Any pointers? Still present in 3.13-rc7.
>>>
>>> On Wed, Dec 4, 2013 at 1:22 PM, Roger Quadros <rogerq@ti.com> wrote:
>>>> +Kishon
>>>>
>>>> On 12/03/2013 11:33 PM, Belisko Marek wrote:
>>>>> Hi,
>>>>>
>>>>> current 3.13-rcX break usb support on gta04 board (similar to
>>>>> beagleboard) when booting via board file.
>>>>>
>>>>> In console we can see messages:
>>>>> [ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>>>> [ 5232.936096] omap_musb_mailbox: musb core is not yet ready
>>>>> [ 5233.958160] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>>>> [ 5235.058227] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
>>>>>
>>>>> Any pointer what could cause that? (in 3.12 usb works fine)
>>>>>
>>>>> BR,
>>>>>
>>>>> marek
>>>>>
>>>>
>>>
>>> BR,
>>>
>>> marek
>>>
>>
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-01-10 6:55 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-03 21:33 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL Belisko Marek
2013-12-04 12:22 ` Roger Quadros
2014-01-08 21:01 ` Belisko Marek
2014-01-09 5:24 ` Roger Quadros
2014-01-10 5:25 ` Kishon Vijay Abraham I
2014-01-10 6:55 ` Belisko Marek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).