* [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400
@ 2014-01-10 3:21 poma
2014-01-15 15:34 ` Robert Richter
0 siblings, 1 reply; 3+ messages in thread
From: poma @ 2014-01-10 3:21 UTC (permalink / raw)
To: Robert Richter; +Cc: Robert Richter, Linux Kernel list
Robert, is there a patch for this case?
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1152484/comments/12
3.10.2 - 3.13.0-0.rc7:
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
microcode: CPU0: new patch_level=0x010000c8
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector
0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
kvm: enabling virtualization on CPU1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-0.rc7.git2.2.fc21.x86_64 #1
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector
0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector
0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S3
poma
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400
2014-01-10 3:21 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400 poma
@ 2014-01-15 15:34 ` Robert Richter
2014-01-21 13:36 ` poma
0 siblings, 1 reply; 3+ messages in thread
From: Robert Richter @ 2014-01-15 15:34 UTC (permalink / raw)
To: poma; +Cc: Linux Kernel list
On 10.01.14 04:21:11, poma wrote:
>
> Robert, is there a patch for this case?
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1152484/comments/12
I just sent a patch to lkml that fixes this:
https://lkml.kernel.org/r/1389797849-5565-1-git-send-email-rric.net@gmail.com
-Robert
>
> 3.10.2 - 3.13.0-0.rc7:
> ACPI: Low-level resume complete
> PM: Restoring platform NVS memory
> microcode: CPU0: new patch_level=0x010000c8
> Enabling non-boot CPUs ...
> x86: Booting SMP configuration:
> smpboot: Booting Node 0 Processor 1 APIC 0x1
> [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector
> 0x400, but the register is already in use for vector 0xf9 on another cpu
> perf: IBS APIC setup failed on cpu #1
> kvm: enabling virtualization on CPU1
> process: Switch to broadcast mode on CPU1
> microcode: CPU1: new patch_level=0x010000c8
> CPU1 is up
> smpboot: Booting Node 0 Processor 2 APIC 0x2
> CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-0.rc7.git2.2.fc21.x86_64 #1
> [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector
> 0x400, but the register is already in use for vector 0xf9 on another cpu
> perf: IBS APIC setup failed on cpu #2
> kvm: enabling virtualization on CPU2
> process: Switch to broadcast mode on CPU2
> microcode: CPU2: new patch_level=0x010000c8
> CPU2 is up
> smpboot: Booting Node 0 Processor 3 APIC 0x3
> [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector
> 0x400, but the register is already in use for vector 0xf9 on another cpu
> perf: IBS APIC setup failed on cpu #3
> kvm: enabling virtualization on CPU3
> process: Switch to broadcast mode on CPU3
> microcode: CPU3: new patch_level=0x010000c8
> CPU3 is up
> ACPI: Waking up from system sleep state S3
>
>
> poma
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400
2014-01-15 15:34 ` Robert Richter
@ 2014-01-21 13:36 ` poma
0 siblings, 0 replies; 3+ messages in thread
From: poma @ 2014-01-21 13:36 UTC (permalink / raw)
To: Robert Richter; +Cc: Linux Kernel list
On 15.01.2014 16:34, Robert Richter wrote:
> On 10.01.14 04:21:11, poma wrote:
>>
>> Robert, is there a patch for this case?
>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1152484/comments/12
>
> I just sent a patch to lkml that fixes this:
>
> https://lkml.kernel.org/r/1389797849-5565-1-git-send-email-rric.net@gmail.com
>
> -Robert
>
All right!
…
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
microcode: CPU0: new patch_level=0x010000c8
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S3
…
Lookin good!
Thanks!
poma
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-01-21 13:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-10 3:21 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400 poma
2014-01-15 15:34 ` Robert Richter
2014-01-21 13:36 ` poma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).