From: Bastien Traverse <bastien.traverse@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: francis.moro@gmail.com, linuux-pm@vger.kernel.org
Subject: Re: 3.12: ethernet controller missing after resuming from suspend to RAM
Date: Thu, 06 Feb 2014 00:42:51 +0100 [thread overview]
Message-ID: <52F2CC7B.80406@gmail.com> (raw)
Hello,
I'm encountering the exact same problem (same model of machine, same
controller, same OS) and was wondering where this bug was at.
I just used my Ethernet NIC for the first time on an up-to-date
Archlinux; it was working fine until I suspended to RAM: on resume the
Realtek/Ethernet device had completely disappeared.
The two entries absent from lspci output after resume are:
$ sudo lspci -v
(…)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device
5289 (rev 01)
Subsystem: CLEVO/KAPOK Computer Device 0540
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f7200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
03:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
Subsystem: CLEVO/KAPOK Computer Device 0540
Flags: bus master, fast devsel, latency 0, IRQ 45
I/O ports at e000 [size=256]
Memory at f0a04000 (64-bit, prefetchable) [size=4K]
Memory at f0a00000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [160] Device Serial Number 02-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
Trying to modprobe r8169 & rtsx_pci didn't change anything.
Tell me whether my dmesg may be of any use, but I doubt it as it is
pretty close to original poster's one.
Thanks,
Bastien
next reply other threads:[~2014-02-05 23:42 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 23:42 Bastien Traverse [this message]
2014-02-06 7:38 ` 3.12: ethernet controller missing after resuming from suspend to RAM Francis Moreau
2014-02-06 12:40 ` Rafael J. Wysocki
2014-02-06 13:33 ` Francis Moreau
2014-02-06 23:15 ` Bastien Traverse
2014-02-07 7:29 ` Francis Moreau
2014-02-06 21:08 ` Peter Wu
2014-02-06 23:28 ` Rafael J. Wysocki
2014-02-06 23:27 ` Peter Wu
2014-02-06 23:48 ` Rafael J. Wysocki
2014-02-07 13:43 ` Peter Wu
2014-02-08 15:01 ` Rafael J. Wysocki
2014-02-08 21:34 ` Peter Wu
2014-02-09 21:46 ` Rafael J. Wysocki
2014-02-09 23:18 ` Peter Wu
2014-02-10 0:52 ` Rafael J. Wysocki
2014-02-10 1:15 ` Peter Wu
2014-02-10 12:10 ` Rafael J. Wysocki
2014-02-10 12:20 ` Mika Westerberg
2014-02-10 22:39 ` Rafael J. Wysocki
2014-02-11 10:42 ` Mika Westerberg
2014-02-11 12:57 ` Rafael J. Wysocki
2014-02-11 18:17 ` Peter Wu
2014-02-11 23:58 ` Rafael J. Wysocki
2014-02-12 7:44 ` Francis Moreau
2014-02-12 14:04 ` Rafael J. Wysocki
2014-02-18 12:18 ` Bastien Traverse
2014-02-12 9:21 ` Mika Westerberg
2014-02-06 23:41 ` Bastien Traverse
2014-02-07 1:19 ` Rafael J. Wysocki
2014-02-09 18:44 ` Bastien Traverse
2014-02-09 22:07 ` Peter Wu
2014-02-11 18:14 ` Bastien Traverse
2014-02-10 8:17 ` Francis Moreau
-- strict thread matches above, loose matches on Subject: below --
2013-12-12 8:00 Francis Moreau
2013-12-12 9:28 ` Francis Moreau
2013-12-12 14:57 ` Rafael J. Wysocki
2013-12-12 17:43 ` Francis Moreau
2013-12-12 17:58 ` Rafael J. Wysocki
2013-12-12 19:17 ` Francis Moreau
2013-12-17 8:05 ` Francis Moreau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F2CC7B.80406@gmail.com \
--to=bastien.traverse@gmail.com \
--cc=francis.moro@gmail.com \
--cc=linuux-pm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).