From: Tomasz Figa <t.figa@samsung.com>
To: Naveen Krishna Chatradhi <ch.naveen@samsung.com>,
linux-samsung-soc@vger.kernel.org, linux-i2c@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
naveenkrishna.ch@gmail.com, kgene.kim@samsung.com,
grant.likely@secretlab.ca, Wolfram Sang <wsa@the-dreams.de>,
linux-kernel@vger.kernel.org, taeggyun.ko@samsung.com,
balbi@ti.com, cpgs@samsung.com
Subject: Re: [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260 SoC
Date: Thu, 06 Feb 2014 14:50:51 +0100 [thread overview]
Message-ID: <52F3933B.9090202@samsung.com> (raw)
In-Reply-To: <52F38EA4.10805@samsung.com>
Also, please use correct addresses of DT ML and Wolfram's e-mail (fixed
in this message).
Best regards,
Tomasz
On 06.02.2014 14:31, Tomasz Figa wrote:
> Hi Naveen,
>
> On 06.02.2014 13:06, Naveen Krishna Chatradhi wrote:
>> This patch implements a variant struct to handle the differences
>> (like fifo_depths) in the HSI2C modules across SoCs.
>>
>> Adds a new compatible to support HSI2C module on Exynos5260.
>> Also resets the module as an init sequence (Needed by Exynos5260).
>>
>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
>> ---
>> Changes since v2:
>> 1. Used variant struct as suggested by Tomasz Figa.
>> 2. Change compatible strings from samsung,exynos5-hsi2c to
>> samsung,exynos5250-hsi2c based on the first SoC to see the feature.
>> 3. Using reset as init sequences.
>> 4. Merged the 2 patches into one.
>>
>> .../devicetree/bindings/i2c/i2c-exynos5.txt | 8 ++-
>> drivers/i2c/busses/i2c-exynos5.c | 64
>> ++++++++++++++++----
>> 2 files changed, 58 insertions(+), 14 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
>> b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
>> index 056732c..5bc4998 100644
>> --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
>> @@ -5,7 +5,11 @@ at various speeds ranging from 100khz to 3.4Mhz.
>>
>> Required properties:
>> - compatible: value should be.
>> - -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
>
> Device tree bindings need to be backwards compatible, so you need to
> keep this compatible string supported, just marked as (DEPRECATED).
>
> Driver-wise, it will use the same driver data / variant struct as
> "samsung,exynos5250-hsi2c", just one more entry in OF match table is
> needed.
>
>> + -> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C
>> available
>> + on Exynos5250 and Exynos5420 SoCs.
>> + -> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C
>> available
>> + on Exynos5260 SoCs.
>> +
>> - reg: physical base address of the controller and length of
>> memory mapped
>> region.
>> - interrupts: interrupt number to the cpu.
>> @@ -26,7 +30,7 @@ Optional properties:
>> Example:
>>
>> hsi2c@12ca0000 {
>> - compatible = "samsung,exynos5-hsi2c";
>> + compatible = "samsung,exynos5250-hsi2c";
>> reg = <0x12ca0000 0x100>;
>> interrupts = <56>;
>> clock-frequency = <100000>;
>
> [snip]
>
>> @@ -483,6 +514,7 @@ static void exynos5_i2c_message_start(struct
>> exynos5_i2c *i2c, int stop)
>> u32 i2c_auto_conf = 0;
>> u32 fifo_ctl;
>> unsigned long flags;
>> + unsigned short trig_lvl;
>>
>> i2c_ctl = readl(i2c->regs + HSI2C_CTL);
>> i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
>> @@ -493,13 +525,19 @@ static void exynos5_i2c_message_start(struct
>> exynos5_i2c *i2c, int stop)
>>
>> i2c_auto_conf = HSI2C_READ_WRITE;
>>
>> - fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL);
>> + trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
>> + (i2c->variant->fifo_depth * 3/4) : i2c->msg->len;
>> + fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(trig_lvl);
>> +
>
> This is a rather serious semantic change, that doesn't look to belong to
> this patch. If this is needed, it should be done in a separate patch.
>
>> int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
>> HSI2C_INT_TRAILING_EN);
>> } else {
>> i2c_ctl |= HSI2C_TXCHON;
>>
>> - fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL);
>> + trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
>> + (i2c->variant->fifo_depth * 1/4) : i2c->msg->len;
>> + fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(trig_lvl);
>> +
>
> Ditto.
>
> Best regards,
> Tomasz
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-02-06 13:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-22 6:14 [PATCH 2/2] i2c: exynos5: configure fifo_depth based on HSI2C module version Naveen Krishna Chatradhi
2013-11-26 4:26 ` [PATCH 2/2 v2] " Naveen Krishna Chatradhi
2013-12-09 16:31 ` [PATCH 2/2] " Tomasz Figa
2013-12-10 4:56 ` Naveen Krishna Ch
2013-12-18 15:21 ` Tomasz Figa
2014-02-06 12:06 ` [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260 SoC Naveen Krishna Chatradhi
2014-02-06 13:31 ` Tomasz Figa
2014-02-06 13:50 ` Tomasz Figa [this message]
2014-02-07 10:17 ` Wolfram Sang
2014-02-07 10:21 ` Tomasz Figa
2014-02-07 4:43 ` [PATCH 2/2 v4] i2c: exynos5: configure fifo_depth based on HSI2C module variant Naveen Krishna Chatradhi
2014-03-12 19:20 ` Wolfram Sang
2014-04-28 6:35 ` Naveen Krishna Ch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F3933B.9090202@samsung.com \
--to=t.figa@samsung.com \
--cc=balbi@ti.com \
--cc=ch.naveen@samsung.com \
--cc=cpgs@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@secretlab.ca \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=naveenkrishna.ch@gmail.com \
--cc=taeggyun.ko@samsung.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).