* [patch 1/2] x86, apic: Remove support for ia32-based Unisys ES7000
2014-02-12 2:53 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 David Rientjes
@ 2014-02-12 2:53 ` David Rientjes
2014-02-12 2:53 ` [patch 2/2] x86, apic: Remove support for IBM Summit/EXA chipset David Rientjes
` (2 subsequent siblings)
3 siblings, 0 replies; 26+ messages in thread
From: David Rientjes @ 2014-02-12 2:53 UTC (permalink / raw)
To: Ingo Molnar, H. Peter Anvin, Thomas Gleixner
Cc: Andi Kleen, linux-kernel, x86, Dave Hansen, Andrey Panin,
Linus Torvalds, Matthew Dobson, Natalie Protasevich,
Garry Forsgren
There should no longer be any ia32-based Unisys ES7000 systems out in
the wild, so remove support for it.
We've done our due diligence in reaching out to any contact information
listed for this system and no indication was given that it should be
kept around.
Signed-off-by: David Rientjes <rientjes@google.com>
---
arch/x86/Kconfig | 12 +-
arch/x86/kernel/acpi/boot.c | 12 -
arch/x86/kernel/apic/Makefile | 1 -
arch/x86/kernel/apic/es7000_32.c | 738 ---------------------------------------
4 files changed, 2 insertions(+), 761 deletions(-)
delete mode 100644 arch/x86/kernel/apic/es7000_32.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -351,7 +351,6 @@ config X86_EXTENDED_PLATFORM
SGI 320/540 (Visual Workstation)
STA2X11-based (e.g. Northville)
Summit/EXA (IBM x440)
- Unisys ES7000 IA32 series
Moorestown MID devices
If you have one of these systems, or if you want to build a
@@ -489,7 +488,7 @@ config X86_32_NON_STANDARD
depends on X86_32 && SMP
depends on X86_EXTENDED_PLATFORM
---help---
- This option compiles in the NUMAQ, Summit, bigsmp, ES7000,
+ This option compiles in the NUMAQ, Summit, bigsmp,
STA2X11, default subarchitectures. It is intended for a generic
binary kernel. If you select them all, kernel will probe it
one by one and will fallback to default.
@@ -555,13 +554,6 @@ config X86_SUMMIT
This option is needed for IBM systems that use the Summit/EXA chipset.
In particular, it is needed for the x440.
-config X86_ES7000
- bool "Unisys ES7000 IA32 series"
- depends on X86_32_NON_STANDARD && X86_BIGSMP
- ---help---
- Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
- supposed to run on an IA32-based Unisys ES7000 system.
-
config X86_32_IRIS
tristate "Eurobraille/Iris poweroff module"
depends on X86_32
@@ -820,7 +812,7 @@ config NR_CPUS
range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
default "1" if !SMP
default "8192" if MAXSMP
- default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
+ default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
default "8" if SMP
---help---
This allows you to specify the maximum number of CPUs which this
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -907,10 +907,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
#ifdef CONFIG_X86_IO_APIC
#define MP_ISA_BUS 0
-#ifdef CONFIG_X86_ES7000
-extern int es7000_plat;
-#endif
-
void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
int ioapic;
@@ -960,14 +956,6 @@ void __init mp_config_acpi_legacy_irqs(void)
set_bit(MP_ISA_BUS, mp_bus_not_pci);
pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
-#ifdef CONFIG_X86_ES7000
- /*
- * Older generations of ES7000 have no legacy identity mappings
- */
- if (es7000_plat == 1)
- return;
-#endif
-
/*
* Use the default configuration for the IRQs 0-15. Unless
* overridden by (MADT) interrupt source override entries.
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -21,7 +21,6 @@ endif
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_SUMMIT) += summit_32.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o
-obj-$(CONFIG_X86_ES7000) += es7000_32.o
# For 32bit, probe_32 need to be listed last
obj-$(CONFIG_X86_LOCAL_APIC) += probe_$(BITS).o
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
deleted file mode 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ /dev/null
@@ -1,738 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- * Natalie Protasevich, Unisys Corporation
- *
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation.
- * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
- *
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/notifier.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
-#include <linux/threads.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/nmi.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/apicdef.h>
-#include <linux/atomic.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-
-/*
- * ES7000 chipsets
- */
-
-#define NON_UNISYS 0
-#define ES7000_CLASSIC 1
-#define ES7000_ZORRO 2
-
-#define MIP_REG 1
-#define MIP_PSAI_REG 4
-
-#define MIP_BUSY 1
-#define MIP_SPIN 0xf0000
-#define MIP_VALID 0x0100000000000000ULL
-#define MIP_SW_APIC 0x1020b
-
-#define MIP_PORT(val) ((val >> 32) & 0xffff)
-
-#define MIP_RD_LO(val) (val & 0xffffffff)
-
-struct mip_reg {
- unsigned long long off_0x00;
- unsigned long long off_0x08;
- unsigned long long off_0x10;
- unsigned long long off_0x18;
- unsigned long long off_0x20;
- unsigned long long off_0x28;
- unsigned long long off_0x30;
- unsigned long long off_0x38;
-};
-
-struct mip_reg_info {
- unsigned long long mip_info;
- unsigned long long delivery_info;
- unsigned long long host_reg;
- unsigned long long mip_reg;
-};
-
-struct psai {
- unsigned long long entry_type;
- unsigned long long addr;
- unsigned long long bep_addr;
-};
-
-#ifdef CONFIG_ACPI
-
-struct es7000_oem_table {
- struct acpi_table_header Header;
- u32 OEMTableAddr;
- u32 OEMTableSize;
-};
-
-static unsigned long oem_addrX;
-static unsigned long oem_size;
-
-#endif
-
-/*
- * ES7000 Globals
- */
-
-static volatile unsigned long *psai;
-static struct mip_reg *mip_reg;
-static struct mip_reg *host_reg;
-static int mip_port;
-static unsigned long mip_addr;
-static unsigned long host_addr;
-
-int es7000_plat;
-
-/*
- * GSI override for ES7000 platforms.
- */
-
-
-static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
-{
- unsigned long vect = 0, psaival = 0;
-
- if (psai == NULL)
- return -1;
-
- vect = ((unsigned long)__pa(eip)/0x1000) << 16;
- psaival = (0x1000000 | vect | cpu);
-
- while (*psai & 0x1000000)
- ;
-
- *psai = psaival;
-
- return 0;
-}
-
-static int es7000_apic_is_cluster(void)
-{
- /* MPENTIUMIII */
- if (boot_cpu_data.x86 == 6 &&
- (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
- return 1;
-
- return 0;
-}
-
-static void setup_unisys(void)
-{
- /*
- * Determine the generation of the ES7000 currently running.
- *
- * es7000_plat = 1 if the machine is a 5xx ES7000 box
- * es7000_plat = 2 if the machine is a x86_64 ES7000 box
- *
- */
- if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
- es7000_plat = ES7000_ZORRO;
- else
- es7000_plat = ES7000_CLASSIC;
-}
-
-/*
- * Parse the OEM Table:
- */
-static int parse_unisys_oem(char *oemptr)
-{
- int i;
- int success = 0;
- unsigned char type, size;
- unsigned long val;
- char *tp = NULL;
- struct psai *psaip = NULL;
- struct mip_reg_info *mi;
- struct mip_reg *host, *mip;
-
- tp = oemptr;
-
- tp += 8;
-
- for (i = 0; i <= 6; i++) {
- type = *tp++;
- size = *tp++;
- tp -= 2;
- switch (type) {
- case MIP_REG:
- mi = (struct mip_reg_info *)tp;
- val = MIP_RD_LO(mi->host_reg);
- host_addr = val;
- host = (struct mip_reg *)val;
- host_reg = __va(host);
- val = MIP_RD_LO(mi->mip_reg);
- mip_port = MIP_PORT(mi->mip_info);
- mip_addr = val;
- mip = (struct mip_reg *)val;
- mip_reg = __va(mip);
- pr_debug("host_reg = 0x%lx\n",
- (unsigned long)host_reg);
- pr_debug("mip_reg = 0x%lx\n",
- (unsigned long)mip_reg);
- success++;
- break;
- case MIP_PSAI_REG:
- psaip = (struct psai *)tp;
- if (tp != NULL) {
- if (psaip->addr)
- psai = __va(psaip->addr);
- else
- psai = NULL;
- success++;
- }
- break;
- default:
- break;
- }
- tp += size;
- }
-
- if (success < 2)
- es7000_plat = NON_UNISYS;
- else
- setup_unisys();
-
- return es7000_plat;
-}
-
-#ifdef CONFIG_ACPI
-static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
-{
- struct acpi_table_header *header = NULL;
- struct es7000_oem_table *table;
- acpi_size tbl_size;
- acpi_status ret;
- int i = 0;
-
- for (;;) {
- ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size);
- if (!ACPI_SUCCESS(ret))
- return -1;
-
- if (!memcmp((char *) &header->oem_id, "UNISYS", 6))
- break;
-
- early_acpi_os_unmap_memory(header, tbl_size);
- }
-
- table = (void *)header;
-
- oem_addrX = table->OEMTableAddr;
- oem_size = table->OEMTableSize;
-
- early_acpi_os_unmap_memory(header, tbl_size);
-
- *oem_addr = (unsigned long)__acpi_map_table(oem_addrX, oem_size);
-
- return 0;
-}
-
-static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
-{
- if (!oem_addr)
- return;
-
- __acpi_unmap_table((char *)oem_addr, oem_size);
-}
-
-static int es7000_check_dsdt(void)
-{
- struct acpi_table_header header;
-
- if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
- !strncmp(header.oem_id, "UNISYS", 6))
- return 1;
- return 0;
-}
-
-static int es7000_acpi_ret;
-
-/* Hook from generic ACPI tables.c */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- unsigned long oem_addr = 0;
- int check_dsdt;
- int ret = 0;
-
- /* check dsdt at first to avoid clear fix_map for oem_addr */
- check_dsdt = es7000_check_dsdt();
-
- if (!find_unisys_acpi_oem_table(&oem_addr)) {
- if (check_dsdt) {
- ret = parse_unisys_oem((char *)oem_addr);
- } else {
- setup_unisys();
- ret = 1;
- }
- /*
- * we need to unmap it
- */
- unmap_unisys_acpi_oem_table(oem_addr);
- }
-
- es7000_acpi_ret = ret;
-
- return ret && !es7000_apic_is_cluster();
-}
-
-static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
-{
- int ret = es7000_acpi_ret;
-
- return ret && es7000_apic_is_cluster();
-}
-
-#else /* !CONFIG_ACPI: */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- return 0;
-}
-
-static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
-{
- return 0;
-}
-#endif /* !CONFIG_ACPI */
-
-static void es7000_spin(int n)
-{
- int i = 0;
-
- while (i++ < n)
- rep_nop();
-}
-
-static int es7000_mip_write(struct mip_reg *mip_reg)
-{
- int status = 0;
- int spin;
-
- spin = MIP_SPIN;
- while ((host_reg->off_0x38 & MIP_VALID) != 0) {
- if (--spin <= 0) {
- WARN(1, "Timeout waiting for Host Valid Flag\n");
- return -1;
- }
- es7000_spin(MIP_SPIN);
- }
-
- memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
- outb(1, mip_port);
-
- spin = MIP_SPIN;
-
- while ((mip_reg->off_0x38 & MIP_VALID) == 0) {
- if (--spin <= 0) {
- WARN(1, "Timeout waiting for MIP Valid Flag\n");
- return -1;
- }
- es7000_spin(MIP_SPIN);
- }
-
- status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48;
- mip_reg->off_0x38 &= ~MIP_VALID;
-
- return status;
-}
-
-static void es7000_enable_apic_mode(void)
-{
- struct mip_reg es7000_mip_reg;
- int mip_status;
-
- if (!es7000_plat)
- return;
-
- pr_info("Enabling APIC mode.\n");
- memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
- es7000_mip_reg.off_0x00 = MIP_SW_APIC;
- es7000_mip_reg.off_0x38 = MIP_VALID;
-
- while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
- WARN(1, "Command failed, status = %x\n", mip_status);
-}
-
-static unsigned int es7000_get_apic_id(unsigned long x)
-{
- return (x >> 24) & 0xFF;
-}
-
-static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
-{
- default_send_IPI_mask_sequence_phys(mask, vector);
-}
-
-static void es7000_send_IPI_allbutself(int vector)
-{
- default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
-}
-
-static void es7000_send_IPI_all(int vector)
-{
- es7000_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int es7000_apic_id_registered(void)
-{
- return 1;
-}
-
-static const struct cpumask *target_cpus_cluster(void)
-{
- return cpu_all_mask;
-}
-
-static const struct cpumask *es7000_target_cpus(void)
-{
- return cpumask_of(smp_processor_id());
-}
-
-static unsigned long es7000_check_apicid_used(physid_mask_t *map, int apicid)
-{
- return 0;
-}
-
-static unsigned long es7000_check_apicid_present(int bit)
-{
- return physid_isset(bit, phys_cpu_present_map);
-}
-
-static int es7000_early_logical_apicid(int cpu)
-{
- /* on es7000, logical apicid is the same as physical */
- return early_per_cpu(x86_bios_cpu_apicid, cpu);
-}
-
-static unsigned long calculate_ldr(int cpu)
-{
- unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu);
-
- return SET_APIC_LOGICAL_ID(id);
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-static void es7000_init_apic_ldr_cluster(void)
-{
- unsigned long val;
- int cpu = smp_processor_id();
-
- apic_write(APIC_DFR, APIC_DFR_CLUSTER);
- val = calculate_ldr(cpu);
- apic_write(APIC_LDR, val);
-}
-
-static void es7000_init_apic_ldr(void)
-{
- unsigned long val;
- int cpu = smp_processor_id();
-
- apic_write(APIC_DFR, APIC_DFR_FLAT);
- val = calculate_ldr(cpu);
- apic_write(APIC_LDR, val);
-}
-
-static void es7000_setup_apic_routing(void)
-{
- int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-
- pr_info("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
- (apic_version[apic] == 0x14) ?
- "Physical Cluster" : "Logical Cluster",
- nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
-}
-
-static int es7000_cpu_present_to_apicid(int mps_cpu)
-{
- if (!mps_cpu)
- return boot_cpu_physical_apicid;
- else if (mps_cpu < nr_cpu_ids)
- return per_cpu(x86_bios_cpu_apicid, mps_cpu);
- else
- return BAD_APICID;
-}
-
-static int cpu_id;
-
-static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap)
-{
- physid_set_mask_of_physid(cpu_id, retmap);
- ++cpu_id;
-}
-
-static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- physids_promote(0xFFL, retmap);
-}
-
-static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
-{
- boot_cpu_physical_apicid = read_apic_id();
- return 1;
-}
-
-static inline int
-es7000_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id)
-{
- unsigned int round = 0;
- unsigned int cpu, uninitialized_var(apicid);
-
- /*
- * The cpus in the mask must all be on the apic cluster.
- */
- for_each_cpu_and(cpu, cpumask, cpu_online_mask) {
- int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-
- if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
- WARN(1, "Not a valid mask!");
-
- return -EINVAL;
- }
- apicid |= new_apicid;
- round++;
- }
- if (!round)
- return -EINVAL;
- *dest_id = apicid;
- return 0;
-}
-
-static int
-es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
- const struct cpumask *andmask,
- unsigned int *apicid)
-{
- cpumask_var_t cpumask;
- *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
-
- if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
- return 0;
-
- cpumask_and(cpumask, inmask, andmask);
- es7000_cpu_mask_to_apicid(cpumask, apicid);
-
- free_cpumask_var(cpumask);
-
- return 0;
-}
-
-static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-static int probe_es7000(void)
-{
- /* probed later in mptable/ACPI hooks */
- return 0;
-}
-
-static int es7000_mps_ret;
-static int es7000_mps_oem_check(struct mpc_table *mpc, char *oem,
- char *productid)
-{
- int ret = 0;
-
- if (mpc->oemptr) {
- struct mpc_oemtable *oem_table =
- (struct mpc_oemtable *)mpc->oemptr;
-
- if (!strncmp(oem, "UNISYS", 6))
- ret = parse_unisys_oem((char *)oem_table);
- }
-
- es7000_mps_ret = ret;
-
- return ret && !es7000_apic_is_cluster();
-}
-
-static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem,
- char *productid)
-{
- int ret = es7000_mps_ret;
-
- return ret && es7000_apic_is_cluster();
-}
-
-/* We've been warned by a false positive warning.Use __refdata to keep calm. */
-static struct apic __refdata apic_es7000_cluster = {
-
- .name = "es7000",
- .probe = probe_es7000,
- .acpi_madt_oem_check = es7000_acpi_madt_oem_check_cluster,
- .apic_id_valid = default_apic_id_valid,
- .apic_id_registered = es7000_apic_id_registered,
-
- .irq_delivery_mode = dest_LowestPrio,
- /* logical delivery broadcast to all procs: */
- .irq_dest_mode = 1,
-
- .target_cpus = target_cpus_cluster,
- .disable_esr = 1,
- .dest_logical = 0,
- .check_apicid_used = es7000_check_apicid_used,
- .check_apicid_present = es7000_check_apicid_present,
-
- .vector_allocation_domain = flat_vector_allocation_domain,
- .init_apic_ldr = es7000_init_apic_ldr_cluster,
-
- .ioapic_phys_id_map = es7000_ioapic_phys_id_map,
- .setup_apic_routing = es7000_setup_apic_routing,
- .multi_timer_check = NULL,
- .cpu_present_to_apicid = es7000_cpu_present_to_apicid,
- .apicid_to_cpu_present = es7000_apicid_to_cpu_present,
- .setup_portio_remap = NULL,
- .check_phys_apicid_present = es7000_check_phys_apicid_present,
- .enable_apic_mode = es7000_enable_apic_mode,
- .phys_pkg_id = es7000_phys_pkg_id,
- .mps_oem_check = es7000_mps_oem_check_cluster,
-
- .get_apic_id = es7000_get_apic_id,
- .set_apic_id = NULL,
- .apic_id_mask = 0xFF << 24,
-
- .cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and,
-
- .send_IPI_mask = es7000_send_IPI_mask,
- .send_IPI_mask_allbutself = NULL,
- .send_IPI_allbutself = es7000_send_IPI_allbutself,
- .send_IPI_all = es7000_send_IPI_all,
- .send_IPI_self = default_send_IPI_self,
-
- .wakeup_secondary_cpu = wakeup_secondary_cpu_via_mip,
-
- .trampoline_phys_low = 0x467,
- .trampoline_phys_high = 0x469,
-
- .wait_for_init_deassert = false,
- /* Nothing to do for most platforms, since cleared by the INIT cycle: */
- .smp_callin_clear_local_apic = NULL,
- .inquire_remote_apic = default_inquire_remote_apic,
-
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .eoi_write = native_apic_mem_write,
- .icr_read = native_apic_icr_read,
- .icr_write = native_apic_icr_write,
- .wait_icr_idle = native_apic_wait_icr_idle,
- .safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
-
- .x86_32_early_logical_apicid = es7000_early_logical_apicid,
-};
-
-static struct apic __refdata apic_es7000 = {
-
- .name = "es7000",
- .probe = probe_es7000,
- .acpi_madt_oem_check = es7000_acpi_madt_oem_check,
- .apic_id_valid = default_apic_id_valid,
- .apic_id_registered = es7000_apic_id_registered,
-
- .irq_delivery_mode = dest_Fixed,
- /* phys delivery to target CPUs: */
- .irq_dest_mode = 0,
-
- .target_cpus = es7000_target_cpus,
- .disable_esr = 1,
- .dest_logical = 0,
- .check_apicid_used = es7000_check_apicid_used,
- .check_apicid_present = es7000_check_apicid_present,
-
- .vector_allocation_domain = flat_vector_allocation_domain,
- .init_apic_ldr = es7000_init_apic_ldr,
-
- .ioapic_phys_id_map = es7000_ioapic_phys_id_map,
- .setup_apic_routing = es7000_setup_apic_routing,
- .multi_timer_check = NULL,
- .cpu_present_to_apicid = es7000_cpu_present_to_apicid,
- .apicid_to_cpu_present = es7000_apicid_to_cpu_present,
- .setup_portio_remap = NULL,
- .check_phys_apicid_present = es7000_check_phys_apicid_present,
- .enable_apic_mode = es7000_enable_apic_mode,
- .phys_pkg_id = es7000_phys_pkg_id,
- .mps_oem_check = es7000_mps_oem_check,
-
- .get_apic_id = es7000_get_apic_id,
- .set_apic_id = NULL,
- .apic_id_mask = 0xFF << 24,
-
- .cpu_mask_to_apicid_and = es7000_cpu_mask_to_apicid_and,
-
- .send_IPI_mask = es7000_send_IPI_mask,
- .send_IPI_mask_allbutself = NULL,
- .send_IPI_allbutself = es7000_send_IPI_allbutself,
- .send_IPI_all = es7000_send_IPI_all,
- .send_IPI_self = default_send_IPI_self,
-
- .trampoline_phys_low = 0x467,
- .trampoline_phys_high = 0x469,
-
- .wait_for_init_deassert = true,
- /* Nothing to do for most platforms, since cleared by the INIT cycle: */
- .smp_callin_clear_local_apic = NULL,
- .inquire_remote_apic = default_inquire_remote_apic,
-
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .eoi_write = native_apic_mem_write,
- .icr_read = native_apic_icr_read,
- .icr_write = native_apic_icr_write,
- .wait_icr_idle = native_apic_wait_icr_idle,
- .safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
-
- .x86_32_early_logical_apicid = es7000_early_logical_apicid,
-};
-
-/*
- * Need to check for es7000 followed by es7000_cluster, so this order
- * in apic_drivers is important.
- */
-apic_drivers(apic_es7000, apic_es7000_cluster);
^ permalink raw reply [flat|nested] 26+ messages in thread* [patch 2/2] x86, apic: Remove support for IBM Summit/EXA chipset
2014-02-12 2:53 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 David Rientjes
2014-02-12 2:53 ` [patch 1/2] x86, apic: Remove support for ia32-based Unisys ES7000 David Rientjes
@ 2014-02-12 2:53 ` David Rientjes
2014-02-12 4:29 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 H. Peter Anvin
2014-02-12 12:50 ` Andi Kleen
3 siblings, 0 replies; 26+ messages in thread
From: David Rientjes @ 2014-02-12 2:53 UTC (permalink / raw)
To: Ingo Molnar, H. Peter Anvin, Thomas Gleixner
Cc: Andi Kleen, linux-kernel, x86, Dave Hansen, Andrey Panin,
Linus Torvalds, Matthew Dobson, Natalie Protasevich,
Garry Forsgren
There should no longer be any IBM x440 systems or those using the
Summit/EXA chipset out in the wild, so remove support for it.
We've done our due diligence in reaching out to any contact information
listed for this chipset and no indication was given that it should be
kept around.
Signed-off-by: David Rientjes <rientjes@google.com>
---
arch/x86/Kconfig | 37 +--
arch/x86/kernel/apic/Makefile | 1 -
arch/x86/kernel/apic/summit_32.c | 550 ---------------------------------------
drivers/clocksource/Makefile | 1 -
drivers/clocksource/cyclone.c | 113 --------
5 files changed, 9 insertions(+), 693 deletions(-)
delete mode 100644 arch/x86/kernel/apic/summit_32.c
delete mode 100644 drivers/clocksource/cyclone.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -350,7 +350,6 @@ config X86_EXTENDED_PLATFORM
RDC R-321x SoC
SGI 320/540 (Visual Workstation)
STA2X11-based (e.g. Northville)
- Summit/EXA (IBM x440)
Moorestown MID devices
If you have one of these systems, or if you want to build a
@@ -488,10 +487,10 @@ config X86_32_NON_STANDARD
depends on X86_32 && SMP
depends on X86_EXTENDED_PLATFORM
---help---
- This option compiles in the NUMAQ, Summit, bigsmp,
- STA2X11, default subarchitectures. It is intended for a generic
- binary kernel. If you select them all, kernel will probe it
- one by one and will fallback to default.
+ This option compiles in the NUMAQ, bigsmp, and STA2X11 default
+ subarchitectures. It is intended for a generic binary kernel. If you
+ select them all, kernel will probe it one by one and will fallback to
+ default.
# Alphabetically sorted list of Non standard 32 bit platforms
@@ -547,13 +546,6 @@ config STA2X11
option is selected the kernel will still be able to boot on
standard PC machines.
-config X86_SUMMIT
- bool "Summit/EXA (IBM x440)"
- depends on X86_32_NON_STANDARD
- ---help---
- This option is needed for IBM systems that use the Summit/EXA chipset.
- In particular, it is needed for the x440.
-
config X86_32_IRIS
tristate "Eurobraille/Iris poweroff module"
depends on X86_32
@@ -676,14 +668,6 @@ config MEMTEST
memtest=4, mean do 4 test patterns.
If you are unsure how to answer this question, answer N.
-config X86_SUMMIT_NUMA
- def_bool y
- depends on X86_32 && NUMA && X86_32_NON_STANDARD
-
-config X86_CYCLONE_TIMER
- def_bool y
- depends on X86_SUMMIT
-
source "arch/x86/Kconfig.cpu"
config HPET_TIMER
@@ -812,7 +796,7 @@ config NR_CPUS
range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
default "1" if !SMP
default "8192" if MAXSMP
- default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
+ default "32" if SMP && (X86_NUMAQ || X86_BIGSMP)
default "8" if SMP
---help---
This allows you to specify the maximum number of CPUs which this
@@ -1232,8 +1216,8 @@ config DIRECT_GBPAGES
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI))
- default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP))
+ default y if (X86_NUMAQ || X86_BIGSMP)
---help---
Enable NUMA (Non Uniform Memory Access) support.
@@ -1245,14 +1229,11 @@ config NUMA
(or later), AMD Opteron, or EM64T NUMA.
For 32-bit this is only needed on (rare) 32-bit-only platforms
- that support NUMA topologies, such as NUMAQ / Summit, or if you
- boot a 32-bit kernel on a 64-bit NUMA platform.
+ that support NUMA topologies, such as NUMAQ, or if you boot a 32-bit
+ kernel on a 64-bit NUMA platform.
Otherwise, you should say N.
-comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
- depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
-
config AMD_NUMA
def_bool y
prompt "Old style AMD Opteron NUMA detection"
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -19,7 +19,6 @@ endif
# APIC probe will depend on the listing order here
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
-obj-$(CONFIG_X86_SUMMIT) += summit_32.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp_32.o
# For 32bit, probe_32 need to be listed last
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
deleted file mode 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ /dev/null
@@ -1,550 +0,0 @@
-/*
- * IBM Summit-Specific Code
- *
- * Written By: Matthew Dobson, IBM Corporation
- *
- * Copyright (c) 2003 IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- *
- */
-
-#define pr_fmt(fmt) "summit: %s: " fmt, __func__
-
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/bios_ebda.h>
-
-/*
- * APIC driver for the IBM "Summit" chipset.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <asm/smp.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <asm/ipi.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/gfp.h>
-#include <linux/smp.h>
-
-static unsigned summit_get_apic_id(unsigned long x)
-{
- return (x >> 24) & 0xFF;
-}
-
-static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector)
-{
- default_send_IPI_mask_sequence_logical(mask, vector);
-}
-
-static void summit_send_IPI_allbutself(int vector)
-{
- default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
-}
-
-static void summit_send_IPI_all(int vector)
-{
- summit_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#include <asm/tsc.h>
-
-extern int use_cyclone;
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-static void setup_summit(void);
-#else
-static inline void setup_summit(void) {}
-#endif
-
-static int summit_mps_oem_check(struct mpc_table *mpc, char *oem,
- char *productid)
-{
- if (!strncmp(oem, "IBM ENSW", 8) &&
- (!strncmp(productid, "VIGIL SMP", 9)
- || !strncmp(productid, "EXA", 3)
- || !strncmp(productid, "RUTHLESS SMP", 12))){
- mark_tsc_unstable("Summit based system");
- use_cyclone = 1; /*enable cyclone-timer*/
- setup_summit();
- return 1;
- }
- return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- if (!strncmp(oem_id, "IBM", 3) &&
- (!strncmp(oem_table_id, "SERVIGIL", 8)
- || !strncmp(oem_table_id, "EXA", 3))){
- mark_tsc_unstable("Summit based system");
- use_cyclone = 1; /*enable cyclone-timer*/
- setup_summit();
- return 1;
- }
- return 0;
-}
-
-struct rio_table_hdr {
- unsigned char version; /* Version number of this data structure */
- /* Version 3 adds chassis_num & WP_index */
- unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
- unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
-} __attribute__((packed));
-
-struct scal_detail {
- unsigned char node_id; /* Scalability Node ID */
- unsigned long CBAR; /* Address of 1MB register space */
- unsigned char port0node; /* Node ID port connected to: 0xFF=None */
- unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port1node; /* Node ID port connected to: 0xFF = None */
- unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port2node; /* Node ID port connected to: 0xFF = None */
- unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
-} __attribute__((packed));
-
-struct rio_detail {
- unsigned char node_id; /* RIO Node ID */
- unsigned long BBAR; /* Address of 1MB register space */
- unsigned char type; /* Type of device */
- unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
- /* For CYC: Node ID of Twister that owns this CYC */
- unsigned char port0node; /* Node ID port connected to: 0xFF=None */
- unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port1node; /* Node ID port connected to: 0xFF=None */
- unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
- /* For CYC: 0 */
- unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
- /* = 0 : the XAPIC is not used, ie:*/
- /* ints fwded to another XAPIC */
- /* Bits1:7 Reserved */
- /* For CYC: Bits0:7 Reserved */
- unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
- /* lower slot numbers/PCI bus numbers */
- /* For CYC: No meaning */
- unsigned char chassis_num; /* 1 based Chassis number */
- /* For LookOut WPEGs this field indicates the */
- /* Expansion Chassis #, enumerated from Boot */
- /* Node WPEG external port, then Boot Node CYC */
- /* external port, then Next Vigil chassis WPEG */
- /* external port, etc. */
- /* Shared Lookouts have only 1 chassis number (the */
- /* first one assigned) */
-} __attribute__((packed));
-
-
-typedef enum {
- CompatTwister = 0, /* Compatibility Twister */
- AltTwister = 1, /* Alternate Twister of internal 8-way */
- CompatCyclone = 2, /* Compatibility Cyclone */
- AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
- CompatWPEG = 4, /* Compatibility WPEG */
- AltWPEG = 5, /* Second Planar WPEG */
- LookOutAWPEG = 6, /* LookOut WPEG */
- LookOutBWPEG = 7, /* LookOut WPEG */
-} node_type;
-
-static inline int is_WPEG(struct rio_detail *rio){
- return (rio->type == CompatWPEG || rio->type == AltWPEG ||
- rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
-}
-
-#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-
-static const struct cpumask *summit_target_cpus(void)
-{
- /* CPU_MASK_ALL (0xff) has undefined behaviour with
- * dest_LowestPrio mode logical clustered apic interrupt routing
- * Just start on cpu 0. IRQ balancing will spread load
- */
- return cpumask_of(0);
-}
-
-static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid)
-{
- return 0;
-}
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static unsigned long summit_check_apicid_present(int bit)
-{
- return 1;
-}
-
-static int summit_early_logical_apicid(int cpu)
-{
- int count = 0;
- u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu);
- u8 my_cluster = APIC_CLUSTER(my_id);
-#ifdef CONFIG_SMP
- u8 lid;
- int i;
-
- /* Create logical APIC IDs by counting CPUs already in cluster. */
- for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
- lid = early_per_cpu(x86_cpu_to_logical_apicid, i);
- if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
- ++count;
- }
-#endif
- /* We only have a 4 wide bitmap in cluster mode. If a deranged
- * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
- BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
- return my_cluster | (1UL << count);
-}
-
-static void summit_init_apic_ldr(void)
-{
- int cpu = smp_processor_id();
- unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
- unsigned long val;
-
- apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(id);
- apic_write(APIC_LDR, val);
-}
-
-static int summit_apic_id_registered(void)
-{
- return 1;
-}
-
-static void summit_setup_apic_routing(void)
-{
- pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n",
- nr_ioapics);
-}
-
-static int summit_cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < nr_cpu_ids)
- return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
- else
- return BAD_APICID;
-}
-
-static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- physids_promote(0x0FL, retmap);
-}
-
-static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap)
-{
- physid_set_mask_of_physid(0, retmap);
-}
-
-static int summit_check_phys_apicid_present(int physical_apicid)
-{
- return 1;
-}
-
-static inline int
-summit_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id)
-{
- unsigned int round = 0;
- unsigned int cpu, apicid = 0;
-
- /*
- * The cpus in the mask must all be on the apic cluster.
- */
- for_each_cpu_and(cpu, cpumask, cpu_online_mask) {
- int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-
- if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
- pr_err("Not a valid mask!\n");
- return -EINVAL;
- }
- apicid |= new_apicid;
- round++;
- }
- if (!round)
- return -EINVAL;
- *dest_id = apicid;
- return 0;
-}
-
-static int
-summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
- const struct cpumask *andmask,
- unsigned int *apicid)
-{
- cpumask_var_t cpumask;
- *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
-
- if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
- return 0;
-
- cpumask_and(cpumask, inmask, andmask);
- summit_cpu_mask_to_apicid(cpumask, apicid);
-
- free_cpumask_var(cpumask);
-
- return 0;
-}
-
-/*
- * cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value. For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static int summit_phys_pkg_id(int cpuid_apic, int index_msb)
-{
- return hard_smp_processor_id() >> index_msb;
-}
-
-static int probe_summit(void)
-{
- /* probed later in mptable/ACPI hooks */
- return 0;
-}
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-static struct rio_table_hdr *rio_table_hdr;
-static struct scal_detail *scal_devs[MAX_NUMNODES];
-static struct rio_detail *rio_devs[MAX_NUMNODES*4];
-
-#ifndef CONFIG_X86_NUMAQ
-static int mp_bus_id_to_node[MAX_MP_BUSSES];
-#endif
-
-static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
-{
- int twister = 0, node = 0;
- int i, bus, num_buses;
-
- for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
- if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
- twister = rio_devs[i]->owner_id;
- break;
- }
- }
- if (i == rio_table_hdr->num_rio_dev) {
- pr_err("Couldn't find owner Cyclone for Winnipeg!\n");
- return last_bus;
- }
-
- for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
- if (scal_devs[i]->node_id == twister) {
- node = scal_devs[i]->node_id;
- break;
- }
- }
- if (i == rio_table_hdr->num_scal_dev) {
- pr_err("Couldn't find owner Twister for Cyclone!\n");
- return last_bus;
- }
-
- switch (rio_devs[wpeg_num]->type) {
- case CompatWPEG:
- /*
- * The Compatibility Winnipeg controls the 2 legacy buses,
- * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
- * a PCI-PCI bridge card is used in either slot: total 5 buses.
- */
- num_buses = 5;
- break;
- case AltWPEG:
- /*
- * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
- * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
- * the "extra" buses for each of those slots: total 7 buses.
- */
- num_buses = 7;
- break;
- case LookOutAWPEG:
- case LookOutBWPEG:
- /*
- * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
- * & the "extra" buses for each of those slots: total 9 buses.
- */
- num_buses = 9;
- break;
- default:
- pr_info("Unsupported Winnipeg type!\n");
- return last_bus;
- }
-
- for (bus = last_bus; bus < last_bus + num_buses; bus++)
- mp_bus_id_to_node[bus] = node;
- return bus;
-}
-
-static int build_detail_arrays(void)
-{
- unsigned long ptr;
- int i, scal_detail_size, rio_detail_size;
-
- if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
- pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n",
- MAX_NUMNODES, rio_table_hdr->num_scal_dev);
- return 0;
- }
-
- switch (rio_table_hdr->version) {
- default:
- pr_warn("Invalid Rio Grande Table Version: %d\n",
- rio_table_hdr->version);
- return 0;
- case 2:
- scal_detail_size = 11;
- rio_detail_size = 13;
- break;
- case 3:
- scal_detail_size = 12;
- rio_detail_size = 15;
- break;
- }
-
- ptr = (unsigned long)rio_table_hdr + 3;
- for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
- scal_devs[i] = (struct scal_detail *)ptr;
-
- for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
- rio_devs[i] = (struct rio_detail *)ptr;
-
- return 1;
-}
-
-void setup_summit(void)
-{
- unsigned long ptr;
- unsigned short offset;
- int i, next_wpeg, next_bus = 0;
-
- /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
- ptr = get_bios_ebda();
- ptr = (unsigned long)phys_to_virt(ptr);
-
- rio_table_hdr = NULL;
- offset = 0x180;
- while (offset) {
- /* The block id is stored in the 2nd word */
- if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
- /* set the pointer past the offset & block id */
- rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
- break;
- }
- /* The next offset is stored in the 1st word. 0 means no more */
- offset = *((unsigned short *)(ptr + offset));
- }
- if (!rio_table_hdr) {
- pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n");
- return;
- }
-
- if (!build_detail_arrays())
- return;
-
- /* The first Winnipeg we're looking for has an index of 0 */
- next_wpeg = 0;
- do {
- for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
- if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
- /* It's the Winnipeg we're looking for! */
- next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
- next_wpeg++;
- break;
- }
- }
- /*
- * If we go through all Rio devices and don't find one with
- * the next index, it means we've found all the Winnipegs,
- * and thus all the PCI buses.
- */
- if (i == rio_table_hdr->num_rio_dev)
- next_wpeg = 0;
- } while (next_wpeg != 0);
-}
-#endif
-
-static struct apic apic_summit = {
-
- .name = "summit",
- .probe = probe_summit,
- .acpi_madt_oem_check = summit_acpi_madt_oem_check,
- .apic_id_valid = default_apic_id_valid,
- .apic_id_registered = summit_apic_id_registered,
-
- .irq_delivery_mode = dest_LowestPrio,
- /* logical delivery broadcast to all CPUs: */
- .irq_dest_mode = 1,
-
- .target_cpus = summit_target_cpus,
- .disable_esr = 1,
- .dest_logical = APIC_DEST_LOGICAL,
- .check_apicid_used = summit_check_apicid_used,
- .check_apicid_present = summit_check_apicid_present,
-
- .vector_allocation_domain = flat_vector_allocation_domain,
- .init_apic_ldr = summit_init_apic_ldr,
-
- .ioapic_phys_id_map = summit_ioapic_phys_id_map,
- .setup_apic_routing = summit_setup_apic_routing,
- .multi_timer_check = NULL,
- .cpu_present_to_apicid = summit_cpu_present_to_apicid,
- .apicid_to_cpu_present = summit_apicid_to_cpu_present,
- .setup_portio_remap = NULL,
- .check_phys_apicid_present = summit_check_phys_apicid_present,
- .enable_apic_mode = NULL,
- .phys_pkg_id = summit_phys_pkg_id,
- .mps_oem_check = summit_mps_oem_check,
-
- .get_apic_id = summit_get_apic_id,
- .set_apic_id = NULL,
- .apic_id_mask = 0xFF << 24,
-
- .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and,
-
- .send_IPI_mask = summit_send_IPI_mask,
- .send_IPI_mask_allbutself = NULL,
- .send_IPI_allbutself = summit_send_IPI_allbutself,
- .send_IPI_all = summit_send_IPI_all,
- .send_IPI_self = default_send_IPI_self,
-
- .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
- .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
-
- .wait_for_init_deassert = true,
- .smp_callin_clear_local_apic = NULL,
- .inquire_remote_apic = default_inquire_remote_apic,
-
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .eoi_write = native_apic_mem_write,
- .icr_read = native_apic_icr_read,
- .icr_write = native_apic_icr_write,
- .wait_icr_idle = native_apic_wait_icr_idle,
- .safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
-
- .x86_32_early_logical_apicid = summit_early_logical_apicid,
-};
-
-apic_driver(apic_summit);
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,6 +1,5 @@
obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
-obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
deleted file mode 100644
--- a/drivers/clocksource/cyclone.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/clocksource.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/timex.h>
-#include <linux/init.h>
-
-#include <asm/pgtable.h>
-#include <asm/io.h>
-
-#include <asm/mach_timer.h>
-
-#define CYCLONE_CBAR_ADDR 0xFEB00CD0 /* base address ptr */
-#define CYCLONE_PMCC_OFFSET 0x51A0 /* offset to control register */
-#define CYCLONE_MPCS_OFFSET 0x51A8 /* offset to select register */
-#define CYCLONE_MPMC_OFFSET 0x51D0 /* offset to count register */
-#define CYCLONE_TIMER_FREQ 99780000 /* 100Mhz, but not really */
-#define CYCLONE_TIMER_MASK CLOCKSOURCE_MASK(32) /* 32 bit mask */
-
-int use_cyclone = 0;
-static void __iomem *cyclone_ptr;
-
-static cycle_t read_cyclone(struct clocksource *cs)
-{
- return (cycle_t)readl(cyclone_ptr);
-}
-
-static struct clocksource clocksource_cyclone = {
- .name = "cyclone",
- .rating = 250,
- .read = read_cyclone,
- .mask = CYCLONE_TIMER_MASK,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_cyclone_clocksource(void)
-{
- unsigned long base; /* saved value from CBAR */
- unsigned long offset;
- u32 __iomem* volatile cyclone_timer; /* Cyclone MPMC0 register */
- u32 __iomem* reg;
- int i;
-
- /* make sure we're on a summit box: */
- if (!use_cyclone)
- return -ENODEV;
-
- printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
-
- /* find base address: */
- offset = CYCLONE_CBAR_ADDR;
- reg = ioremap_nocache(offset, sizeof(reg));
- if (!reg) {
- printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
- return -ENODEV;
- }
- /* even on 64bit systems, this is only 32bits: */
- base = readl(reg);
- iounmap(reg);
- if (!base) {
- printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
- return -ENODEV;
- }
-
- /* setup PMCC: */
- offset = base + CYCLONE_PMCC_OFFSET;
- reg = ioremap_nocache(offset, sizeof(reg));
- if (!reg) {
- printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
- return -ENODEV;
- }
- writel(0x00000001,reg);
- iounmap(reg);
-
- /* setup MPCS: */
- offset = base + CYCLONE_MPCS_OFFSET;
- reg = ioremap_nocache(offset, sizeof(reg));
- if (!reg) {
- printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
- return -ENODEV;
- }
- writel(0x00000001,reg);
- iounmap(reg);
-
- /* map in cyclone_timer: */
- offset = base + CYCLONE_MPMC_OFFSET;
- cyclone_timer = ioremap_nocache(offset, sizeof(u64));
- if (!cyclone_timer) {
- printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
- return -ENODEV;
- }
-
- /* quick test to make sure its ticking: */
- for (i = 0; i < 3; i++){
- u32 old = readl(cyclone_timer);
- int stall = 100;
-
- while (stall--)
- barrier();
-
- if (readl(cyclone_timer) == old) {
- printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
- iounmap(cyclone_timer);
- cyclone_timer = NULL;
- return -ENODEV;
- }
- }
- cyclone_ptr = cyclone_timer;
-
- return clocksource_register_hz(&clocksource_cyclone,
- CYCLONE_TIMER_FREQ);
-}
-
-arch_initcall(init_cyclone_clocksource);
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [GIT PULL] x86, apic: Remove support for Summit and ES7000
2014-02-12 2:53 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 David Rientjes
2014-02-12 2:53 ` [patch 1/2] x86, apic: Remove support for ia32-based Unisys ES7000 David Rientjes
2014-02-12 2:53 ` [patch 2/2] x86, apic: Remove support for IBM Summit/EXA chipset David Rientjes
@ 2014-02-12 4:29 ` H. Peter Anvin
2014-02-12 5:20 ` David Rientjes
2014-02-12 7:06 ` Ingo Molnar
2014-02-12 12:50 ` Andi Kleen
3 siblings, 2 replies; 26+ messages in thread
From: H. Peter Anvin @ 2014-02-12 4:29 UTC (permalink / raw)
To: David Rientjes, Ingo Molnar, Thomas Gleixner
Cc: Andi Kleen, linux-kernel, x86, Dave Hansen, Andrey Panin,
Linus Torvalds, Matthew Dobson, Natalie Protasevich,
Garry Forsgren
On 02/11/2014 06:53 PM, David Rientjes wrote:
> Hi Ingo, Peter, and Thomas,
>
> [ Be aware of bouncing emails on the cc, it includes the last-known email
> addresses of the authors of these subarchitectures and may bounce. ]
>
> If you agree, please pull from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/rientjes/linux.git x86/apic
>
> # HEAD: 7cf6c94591bbf3dbe3bf9573a6551328ad76d885 x86, apic: Remove support for IBM Summit/EXA chipset
>
> or apply individually. This branch is based on x86/apic.
>
> This is the removal of Summit and ES7000 subarchitectures from x86. I'd
> like to do the same for NumaQ, but am still researching if we can really
> do away with it.
Nice.
-hpa
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [GIT PULL] x86, apic: Remove support for Summit and ES7000
2014-02-12 4:29 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 H. Peter Anvin
@ 2014-02-12 5:20 ` David Rientjes
2014-02-12 7:06 ` Ingo Molnar
1 sibling, 0 replies; 26+ messages in thread
From: David Rientjes @ 2014-02-12 5:20 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Ingo Molnar, Thomas Gleixner, Andi Kleen, linux-kernel, x86,
Dave Hansen, Andrey Panin, Linus Torvalds, Natalie Protasevich,
Garry Forsgren
On Tue, 11 Feb 2014, H. Peter Anvin wrote:
> Nice.
>
Natalie emailed me and said she agrees with the removal of es7000.
Matthew's email address bounces, so summit is orphaned and the email
address in its header is obsolete.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [GIT PULL] x86, apic: Remove support for Summit and ES7000
2014-02-12 4:29 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 H. Peter Anvin
2014-02-12 5:20 ` David Rientjes
@ 2014-02-12 7:06 ` Ingo Molnar
2014-02-12 8:39 ` H. Peter Anvin
1 sibling, 1 reply; 26+ messages in thread
From: Ingo Molnar @ 2014-02-12 7:06 UTC (permalink / raw)
To: H. Peter Anvin
Cc: David Rientjes, Ingo Molnar, Thomas Gleixner, Andi Kleen,
linux-kernel, x86, Dave Hansen, Andrey Panin, Linus Torvalds,
Matthew Dobson, Natalie Protasevich, Garry Forsgren
* H. Peter Anvin <hpa@zytor.com> wrote:
> On 02/11/2014 06:53 PM, David Rientjes wrote:
> > Hi Ingo, Peter, and Thomas,
> >
> > [ Be aware of bouncing emails on the cc, it includes the last-known email
> > addresses of the authors of these subarchitectures and may bounce. ]
> >
> > If you agree, please pull from:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/rientjes/linux.git x86/apic
> >
> > # HEAD: 7cf6c94591bbf3dbe3bf9573a6551328ad76d885 x86, apic: Remove support for IBM Summit/EXA chipset
> >
> > or apply individually. This branch is based on x86/apic.
> >
> > This is the removal of Summit and ES7000 subarchitectures from x86. I'd
> > like to do the same for NumaQ, but am still researching if we can really
> > do away with it.
>
> Nice.
I'm fine with this too.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [GIT PULL] x86, apic: Remove support for Summit and ES7000
2014-02-12 7:06 ` Ingo Molnar
@ 2014-02-12 8:39 ` H. Peter Anvin
0 siblings, 0 replies; 26+ messages in thread
From: H. Peter Anvin @ 2014-02-12 8:39 UTC (permalink / raw)
To: Ingo Molnar
Cc: David Rientjes, Ingo Molnar, Thomas Gleixner, Andi Kleen,
linux-kernel, x86, Dave Hansen, Andrey Panin, Linus Torvalds,
Matthew Dobson, Natalie Protasevich, Garry Forsgren
Running tests on this branch, will push it into tip tomorrow if ok.
On February 11, 2014 11:06:45 PM PST, Ingo Molnar <mingo@kernel.org> wrote:
>
>* H. Peter Anvin <hpa@zytor.com> wrote:
>
>> On 02/11/2014 06:53 PM, David Rientjes wrote:
>> > Hi Ingo, Peter, and Thomas,
>> >
>> > [ Be aware of bouncing emails on the cc, it includes the
>last-known email
>> > addresses of the authors of these subarchitectures and may
>bounce. ]
>> >
>> > If you agree, please pull from:
>> >
>> > git://git.kernel.org/pub/scm/linux/kernel/git/rientjes/linux.git
>x86/apic
>> >
>> > # HEAD: 7cf6c94591bbf3dbe3bf9573a6551328ad76d885 x86, apic:
>Remove support for IBM Summit/EXA chipset
>> >
>> > or apply individually. This branch is based on x86/apic.
>> >
>> > This is the removal of Summit and ES7000 subarchitectures from x86.
> I'd
>> > like to do the same for NumaQ, but am still researching if we can
>really
>> > do away with it.
>>
>> Nice.
>
>I'm fine with this too.
>
>Thanks,
>
> Ingo
--
Sent from my mobile phone. Please pardon brevity and lack of formatting.
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [GIT PULL] x86, apic: Remove support for Summit and ES7000
2014-02-12 2:53 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 David Rientjes
` (2 preceding siblings ...)
2014-02-12 4:29 ` [GIT PULL] x86, apic: Remove support for Summit and ES7000 H. Peter Anvin
@ 2014-02-12 12:50 ` Andi Kleen
2014-02-12 15:17 ` H. Peter Anvin
3 siblings, 1 reply; 26+ messages in thread
From: Andi Kleen @ 2014-02-12 12:50 UTC (permalink / raw)
To: David Rientjes
Cc: Ingo Molnar, H. Peter Anvin, Thomas Gleixner, Andi Kleen,
linux-kernel, x86, Dave Hansen, Andrey Panin, Linus Torvalds,
Matthew Dobson, Natalie Protasevich, Garry Forsgren
> This is the removal of Summit and ES7000 subarchitectures from x86. I'd
> like to do the same for NumaQ, but am still researching if we can really
> do away with it.
Nice!
How about VISWS?
Please also check if some arch abstracion innline wrappers are not needed
anymore.
I suspect removing numaq will be most helpful, iirc it was the most intrusive.
-Andi
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [GIT PULL] x86, apic: Remove support for Summit and ES7000
2014-02-12 12:50 ` Andi Kleen
@ 2014-02-12 15:17 ` H. Peter Anvin
0 siblings, 0 replies; 26+ messages in thread
From: H. Peter Anvin @ 2014-02-12 15:17 UTC (permalink / raw)
To: Andi Kleen, David Rientjes
Cc: Ingo Molnar, Thomas Gleixner, linux-kernel, x86, Dave Hansen,
Andrey Panin, Linus Torvalds, Matthew Dobson, Natalie Protasevich,
Garry Forsgren
Yes, I would love to get visws and numaq killed off, too.
On February 12, 2014 4:50:26 AM PST, Andi Kleen <andi@firstfloor.org> wrote:
>> This is the removal of Summit and ES7000 subarchitectures from x86.
>I'd
>> like to do the same for NumaQ, but am still researching if we can
>really
>> do away with it.
>
>Nice!
>
>How about VISWS?
>
>Please also check if some arch abstracion innline wrappers are not
>needed
>anymore.
>
>I suspect removing numaq will be most helpful, iirc it was the most
>intrusive.
>
>-Andi
--
Sent from my mobile phone. Please pardon brevity and lack of formatting.
^ permalink raw reply [flat|nested] 26+ messages in thread