From: Andrey Tsyvarev <tsyvarev@ispras.ru>
To: jaegeuk.kim@samsung.com
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
linux-f2fs-devel@lists.sourceforge.net
Subject: Re: [f2fs-dev] f2fs: f2fs unmount hangs if f2fs_init_acl() fails during mkdir syscall
Date: Tue, 11 Feb 2014 12:29:57 +0400 [thread overview]
Message-ID: <52F9DF85.7040402@ispras.ru> (raw)
In-Reply-To: <1391749933.25542.83.camel@kjgkr>
Hi,
> It turns out that make_bad_inode prior to iput sets i_mode to a regular
> file, so that f2fs_evict_inode -> truncate_inode_pages ->
> f2fs_invalidate_data_page doesn't decrement dirty_dents.
>
It seems that remove_dirty_dir_inode() call should also be added to the
error-path of
init_inode_metadata, because its functionality is also based on
inode->i_mode field
which is changed by make_bad_inode().
Otherwise memory leak is reported when f2fs module is unloaded:
[ 231.378192] BUG f2fs_dirty_dir_entry (Tainted: GF O):
Objects remaining in f2fs_dirty_dir_entry on kmem_cache_close()
[ 231.378193]
-----------------------------------------------------------------------------
[ 231.378194] Disabling lock debugging due to kernel taint
[ 231.378195] INFO: Slab 0xffffea0000437200 objects=102 used=1
fp=0xffff880010dc8fc8 flags=0x3fffc000000080
[ 231.378197] CPU: 0 PID: 2605 Comm: rmmod Tainted: GF B O
3.14.0-rc1fs #4
[ 231.378198] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 231.378199] ffff88000e5e3200 ffff88000cc9bd40 ffffffff8166fd7e
ffffea0000437200
[ 231.378202] ffff88000cc9be28 ffffffff811c3fdf ffff88003fc10066
ffffffff0cc9bda0
[ 231.378203] ffffffff00000020 ffff88000cc9be38 ffff88000cc9bde0
656a624f00000296
[ 231.378205] Call Trace:
[ 231.378210] [<ffffffff8166fd7e>] dump_stack+0x45/0x56
[ 231.378213] [<ffffffff811c3fdf>] slab_err+0xaf/0xc0
[ 231.378215] [<ffffffff811c84a3>] ? kmem_cache_close+0x133/0x340
[ 231.378216] [<ffffffff811c6b55>] ? __kmalloc+0x1f5/0x250
[ 231.378218] [<ffffffff811c84c3>] kmem_cache_close+0x153/0x340
[ 231.378221] [<ffffffff81193417>] ? kmem_cache_destroy+0x27/0xf0
[ 231.378223] [<ffffffff811c86c4>] __kmem_cache_shutdown+0x14/0x80
[ 231.378224] [<ffffffff81193431>] kmem_cache_destroy+0x41/0xf0
[ 231.378229] [<ffffffffa01eab91>] destroy_checkpoint_caches+0x21/0x30
[f2fs]
[ 231.378232] [<ffffffffa01facda>] exit_f2fs_fs+0x28/0x34e [f2fs]
[ 231.378235] [<ffffffff810ffe32>] SyS_delete_module+0x152/0x1f0
[ 231.378237] [<ffffffff8111d85c>] ? __audit_syscall_entry+0x9c/0xf0
[ 231.378239] [<ffffffff81680729>] system_call_fastpath+0x16/0x1b
[ 231.378242] INFO: Object 0xffff880010dc8000 @offset=0
[ 231.378245] kmem_cache_destroy f2fs_dirty_dir_entry: Slab cache still
has objects
[ 231.378247] CPU: 0 PID: 2605 Comm: rmmod Tainted: GF B O
3.14.0-rc1fs #4
[ 231.378247] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 231.378248] ffff88000e5e3268 ffff88000cc9beb8 ffffffff8166fd7e
ffff88000e5e3200
[ 231.378250] ffff88000cc9bed8 ffffffff811934cf 0000000000000000
ffffffffa0204f60
[ 231.378251] ffff88000cc9bee8 ffffffffa01eab91 ffff88000cc9bef8
ffffffffa01facda
[ 231.378253] Call Trace:
[ 231.378255] [<ffffffff8166fd7e>] dump_stack+0x45/0x56
[ 231.378256] [<ffffffff811934cf>] kmem_cache_destroy+0xdf/0xf0
[ 231.378259] [<ffffffffa01eab91>] destroy_checkpoint_caches+0x21/0x30
[f2fs]
[ 231.378262] [<ffffffffa01facda>] exit_f2fs_fs+0x28/0x34e [f2fs]
[ 231.378263] [<ffffffff810ffe32>] SyS_delete_module+0x152/0x1f0
[ 231.378265] [<ffffffff8111d85c>] ? __audit_syscall_entry+0x9c/0xf0
[ 231.378266] [<ffffffff81680729>] system_call_fastpath+0x16/0x1b
Stack of allocation (obtained with KEDR, which is also used for fault
simulation):
[ 231.414875] [leak_check] Address: 0xffff880010dc8000, size: 24; stack
trace of the allocation:
[ 231.414886] [leak_check] [<ffffffffa01e9d72>]
set_dirty_dir_page+0x62/0xe0 [f2fs]
[ 231.414893] [leak_check] [<ffffffffa01ec9be>]
f2fs_set_data_page_dirty+0x4e/0x90 [f2fs]
[ 231.414898] [leak_check] [<ffffffff8117b02a>] set_page_dirty+0x3a/0x60
[ 231.414904] [leak_check] [<ffffffffa01dfeb2>]
__f2fs_add_link+0x732/0x7d0 [f2fs]
[ 231.414909] [leak_check] [<ffffffffa01e2f1b>] f2fs_mkdir+0xbb/0x150
[f2fs]
[ 231.414914] [leak_check] [<ffffffff811f2a37>] vfs_mkdir+0xb7/0x160
[ 231.414918] [leak_check] [<ffffffff811f367f>] SyS_mkdir+0x5f/0xc0
[ 231.414923] [leak_check] [<ffffffff81680729>]
system_call_fastpath+0x16/0x1b
[ 231.414931] [leak_check] [<ffffffffffffffff>] 0xffffffffffffffff
P.S. It was required to add 'slub_debug' kernel options for make SLUB
output correct cache name,
otherwise cache "f2fs_dirty_dir_entry" was merged into "free_nid" one.
It was surprise for me,
that's why patch investigation took so long time.
--
Best regards,
Andrey Tsyvarev
Linux Verification Center, ISPRAS
web:http://linuxtesting.org
next prev parent reply other threads:[~2014-02-11 8:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-06 5:43 f2fs: f2fs unmount hangs if f2fs_init_acl() fails during mkdir syscall Andrey Tsyvarev
2014-02-06 6:02 ` Jaegeuk Kim
2014-02-06 12:17 ` Andrey Tsyvarev
2014-02-07 0:49 ` Jaegeuk Kim
2014-02-07 5:12 ` [f2fs-dev] " Jaegeuk Kim
2014-02-11 8:29 ` Andrey Tsyvarev [this message]
2014-02-13 8:32 ` Gu Zheng
2014-02-13 9:40 ` Andrey Tsyvarev
2014-02-13 9:48 ` Gu Zheng
2014-02-14 2:00 ` Jaegeuk Kim
2014-02-14 1:58 ` Jaegeuk Kim
2014-04-14 11:12 ` f2fs: BUG_ON() is triggered when mount valid f2fs filesystem Andrey Tsyvarev
2014-04-15 11:04 ` Jaegeuk Kim
2014-04-16 9:11 ` Andrey Tsyvarev
2014-04-16 23:35 ` Jaegeuk Kim
2014-04-17 1:11 ` Alexey Khoroshilov
2014-04-17 7:45 ` Jaegeuk Kim
2014-04-18 6:04 ` Alexey Khoroshilov
2014-04-18 6:35 ` Jaegeuk Kim
2014-04-18 6:40 ` Gu Zheng
2014-07-21 10:56 ` f2fs: Possible use-after-free when umount filesystem Andrey Tsyvarev
2014-07-22 2:17 ` Gu Zheng
2014-07-22 10:04 ` Andrey Tsyvarev
2014-07-23 2:12 ` [f2fs-dev] " Chao Yu
2014-07-23 3:39 ` Gu Zheng
2014-07-24 10:14 ` Andrey Tsyvarev
2014-07-25 3:22 ` Chao Yu
2014-07-25 5:49 ` Gu Zheng
2014-07-25 15:37 ` Jaegeuk Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F9DF85.7040402@ispras.ru \
--to=tsyvarev@ispras.ru \
--cc=jaegeuk.kim@samsung.com \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox