public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: rjliao@codeaurora.org
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH v1] Bluetooth: hci_qca: Add poweroff support during hci down for QCA Rome
Date: Wed, 25 Dec 2019 14:06:40 +0800	[thread overview]
Message-ID: <52b233716cc5bd39b67c49ad2e45d899@codeaurora.org> (raw)
In-Reply-To: <20191219040334.15355-1-rjliao@codeaurora.org>

Please ingnore this patch, I have just sent the new set of patches.

在 2019-12-19 12:03,Rocky Liao 写道:
> This patch enables power off support for hci down and power on support
> for hci up. As QCA Rome power sources are ignited by bt_en GPIO, we 
> will
> pull it down during hci down, i.e. an complete power off of QCA Rome.
> So while hci up, will pull up the bt_en GPIO again to power on the 
> chip,
> requests BT chip version and download the firmware.
> 
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
>  drivers/bluetooth/hci_qca.c | 34 ++++++++++++++++++++++++++++++----
>  1 file changed, 30 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index b602ed01505b..1cb706acdef6 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1257,6 +1257,7 @@ static int qca_setup(struct hci_uart *hu)
>  {
>  	struct hci_dev *hdev = hu->hdev;
>  	struct qca_data *qca = hu->priv;
> +	struct qca_serdev *qcadev;
>  	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
>  	enum qca_btsoc_type soc_type = qca_soc_type(hu);
>  	const char *firmware_name = qca_get_firmware_name(hu);
> @@ -1293,6 +1294,17 @@ static int qca_setup(struct hci_uart *hu)
>  			return ret;
>  	} else {
>  		bt_dev_info(hdev, "ROME setup");
> +		if (hu->serdev) {
> +			/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to
> +			 * execute setup for every hci up.
> +			 */
> +			set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
> +			qcadev = serdev_device_get_drvdata(hu->serdev);
> +			hu->hdev->shutdown = qca_power_off;
> +			gpiod_set_value_cansleep(qcadev->bt_en, 1);
> +			/* Controller needs time to bootup. */
> +			msleep(150);
> +		}
>  		qca_set_speed(hu, QCA_INIT_SPEED);
>  	}
> 
> @@ -1413,13 +1425,27 @@ static void qca_power_shutdown(struct hci_uart 
> *hu)
>  static int qca_power_off(struct hci_dev *hdev)
>  {
>  	struct hci_uart *hu = hci_get_drvdata(hdev);
> +	struct qca_serdev *qcadev;
> +	enum qca_btsoc_type soc_type = qca_soc_type(hu);
> 
> -	/* Perform pre shutdown command */
> -	qca_send_pre_shutdown_cmd(hdev);
> +	if (qca_is_wcn399x(soc_type)) {
> +		/* Perform pre shutdown command */
> +		qca_send_pre_shutdown_cmd(hdev);
> 
> -	usleep_range(8000, 10000);
> +		usleep_range(8000, 10000);
> +
> +		qca_power_shutdown(hu);
> +	} else {
> +		if (hu->serdev) {
> +
> +			qcadev = serdev_device_get_drvdata(hu->serdev);
> +
> +			gpiod_set_value_cansleep(qcadev->bt_en, 0);
> +
> +			usleep_range(8000, 10000);
> +		}
> +	}
> 
> -	qca_power_shutdown(hu);
>  	return 0;
>  }

      reply	other threads:[~2019-12-25  6:06 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-19  4:03 [PATCH v1] Bluetooth: hci_qca: Add poweroff support during hci down for QCA Rome Rocky Liao
2019-12-25  6:06 ` rjliao [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52b233716cc5bd39b67c49ad2e45d899@codeaurora.org \
    --to=rjliao@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox