From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755547AbaBTQgk (ORCPT ); Thu, 20 Feb 2014 11:36:40 -0500 Received: from bear.ext.ti.com ([192.94.94.41]:35496 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755142AbaBTQgh (ORCPT ); Thu, 20 Feb 2014 11:36:37 -0500 Message-ID: <53062EFB.3080501@ti.com> Date: Thu, 20 Feb 2014 10:36:11 -0600 From: Nishanth Menon User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0 MIME-Version: 1.0 To: =?ISO-8859-1?Q?Beno=EEt_Cousson?= , Tony Lindgren CC: , , , , "Andrii.Tseglytskyi" , Nishanth Menon Subject: Re: [PATCH 3/4] ARM: dts: OMAP5: Add device nodes for ABB References: <1391039177-25284-1-git-send-email-nm@ti.com> <1391039177-25284-4-git-send-email-nm@ti.com> In-Reply-To: <1391039177-25284-4-git-send-email-nm@ti.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 01/29/2014 05:46 PM, Nishanth Menon wrote: > From: "Andrii.Tseglytskyi" > > Add ABB device nodes for OMAP5 family of devices. Data is based on > OMAP543x Technical Reference Manual revision U (April 2013). > NOTE: clock node has been disabled in this patch due to the lack of > OMAP5 clock data. > > [nm@ti.com: co-developer] > Signed-off-by: Nishanth Menon > Signed-off-by: Andrii.Tseglytskyi > --- I have been informed that there is an fix in TI official documentation which is due end of this month. So, I have to drop this patch from the series for the time being - I will refresh this along with necessary OMAP5 updates once the official documentation is available. > arch/arm/boot/dts/omap5.dtsi | 63 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index a72813a..6159f20 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -801,6 +801,69 @@ > > #thermal-sensor-cells = <1>; > }; > + > + abb_mpu: regulator-abb-mpu { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mpu"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, > + <0x4a0021ac 0x18>, <0x4ae0C318 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80>; > + /* LDOVBBMPU_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMPU_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 880000 0 0x4 0 0x20000000 0x1F000000 > + 1060000 0 0x8 0 0x20000000 0x1F000000 > + 1250000 0 0x10 0 0x20000000 0x1F000000 > + 1260000 1 0x14 0 0x20000000 0x1F000000 > + >; > + }; > + > + abb_mm: regulator-abb-mm { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mm"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, > + <0x4a002194 0x14>, <0x4ae0C314 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80000000>; > + /* LDOVBBMM_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMM_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 880000 0 0x4 0 0x20000000 0x1F000000 > + 1025000 0 0x8 0 0x20000000 0x1F000000 > + 1120000 1 0x10 0 0x20000000 0x1F000000 > + >; > + }; > }; > }; > > -- Regards, Nishanth Menon