From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758507AbaCEOsS (ORCPT ); Wed, 5 Mar 2014 09:48:18 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:53539 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752886AbaCEOsO (ORCPT ); Wed, 5 Mar 2014 09:48:14 -0500 Message-ID: <531738FF.5050902@ti.com> Date: Wed, 5 Mar 2014 20:17:27 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.3.0 MIME-Version: 1.0 To: Roger Quadros , , , , , , , , , , CC: , , , , , , , , , , , Subject: Re: [PATCH v5 2/6] usb: dwc3: adapt dwc3 core to use Generic PHY Framework References: <1393846695-14644-1-git-send-email-kishon@ti.com> <1393846695-14644-3-git-send-email-kishon@ti.com> <53173809.2060303@ti.com> In-Reply-To: <53173809.2060303@ti.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Roger, On Wednesday 05 March 2014 08:13 PM, Roger Quadros wrote: > Hi Kishon, > > On 03/03/2014 01:38 PM, Kishon Vijay Abraham I wrote: >> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit, >> power_on and power_off the following APIs are used phy_init(), phy_exit(), >> phy_power_on() and phy_power_off(). >> >> However using the old USB phy library wont be removed till the PHYs of all >> other SoC's using dwc3 core is adapted to the Generic PHY Framework. >> >> Signed-off-by: Kishon Vijay Abraham I >> --- >> Documentation/devicetree/bindings/usb/dwc3.txt | 6 +- >> drivers/usb/dwc3/core.c | 86 +++++++++++++++++++++--- >> drivers/usb/dwc3/core.h | 7 ++ >> 3 files changed, 89 insertions(+), 10 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >> index e807635..471366d 100644 >> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >> @@ -6,11 +6,13 @@ Required properties: >> - compatible: must be "snps,dwc3" >> - reg : Address and length of the register set for the device >> - interrupts: Interrupts used by the dwc3 controller. >> + >> +Optional properties: >> - usb-phy : array of phandle for the PHY device. The first element >> in the array is expected to be a handle to the USB2/HS PHY and >> the second element is expected to be a handle to the USB3/SS PHY >> - >> -Optional properties: >> + - phys: from the *Generic PHY* bindings >> + - phy-names: from the *Generic PHY* bindings >> - tx-fifo-resize: determines if the FIFO *has* to be reallocated. >> >> This is usually a subnode to DWC3 glue to which it is connected. >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c >> index 225a4d6..497234a 100644 >> --- a/drivers/usb/dwc3/core.c >> +++ b/drivers/usb/dwc3/core.c >> @@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) >> * dwc3_core_soft_reset - Issues core soft reset and PHY reset >> * @dwc: pointer to our context structure >> */ >> -static void dwc3_core_soft_reset(struct dwc3 *dwc) >> +static int dwc3_core_soft_reset(struct dwc3 *dwc) >> { >> u32 reg; >> + int ret; >> >> /* Before Resetting PHY, put Core in Reset */ >> reg = dwc3_readl(dwc->regs, DWC3_GCTL); >> @@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) >> >> usb_phy_init(dwc->usb2_phy); >> usb_phy_init(dwc->usb3_phy); >> + ret = phy_init(dwc->usb2_generic_phy); > > you need to check if dwc->usb?_generic_phy is not NULL before using any of the PHY APIs > throughout this patch. Recently a patch to allow NULL in phy APIs was added to support optional PHYs. commit 04c2facad8fee66c981a51852806d8923336f362 Author: Andrew Lunn Date: Tue Feb 4 18:33:11 2014 +0100 drivers: phy: Make NULL a valid phy reference Thanks Kishon