* [PATCH] virtio-scsi: Change sense buffer size to 252 @ 2014-03-06 8:47 Fam Zheng 2014-03-06 10:09 ` Paolo Bonzini 0 siblings, 1 reply; 6+ messages in thread From: Fam Zheng @ 2014-03-06 8:47 UTC (permalink / raw) To: linux-kernel; +Cc: linux-scsi, kvm, pbonzini According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So increase the value. Signed-off-by: Fam Zheng <famz@redhat.com> --- include/linux/virtio_scsi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h index 4195b97..a437f7f 100644 --- a/include/linux/virtio_scsi.h +++ b/include/linux/virtio_scsi.h @@ -28,7 +28,7 @@ #define _LINUX_VIRTIO_SCSI_H #define VIRTIO_SCSI_CDB_SIZE 32 -#define VIRTIO_SCSI_SENSE_SIZE 96 +#define VIRTIO_SCSI_SENSE_SIZE 252 /* SCSI command request, followed by data-out */ struct virtio_scsi_cmd_req { -- 1.9.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] virtio-scsi: Change sense buffer size to 252 2014-03-06 8:47 [PATCH] virtio-scsi: Change sense buffer size to 252 Fam Zheng @ 2014-03-06 10:09 ` Paolo Bonzini 2014-03-06 11:22 ` Hannes Reinecke 2014-03-07 5:56 ` Fam Zheng 0 siblings, 2 replies; 6+ messages in thread From: Paolo Bonzini @ 2014-03-06 10:09 UTC (permalink / raw) To: Fam Zheng, linux-kernel; +Cc: linux-scsi, kvm Il 06/03/2014 09:47, Fam Zheng ha scritto: > According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So > increase the value. > > Signed-off-by: Fam Zheng <famz@redhat.com> > --- > include/linux/virtio_scsi.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h > index 4195b97..a437f7f 100644 > --- a/include/linux/virtio_scsi.h > +++ b/include/linux/virtio_scsi.h > @@ -28,7 +28,7 @@ > #define _LINUX_VIRTIO_SCSI_H > > #define VIRTIO_SCSI_CDB_SIZE 32 > -#define VIRTIO_SCSI_SENSE_SIZE 96 > +#define VIRTIO_SCSI_SENSE_SIZE 252 > > /* SCSI command request, followed by data-out */ > struct virtio_scsi_cmd_req { > Hi Fam, how did you test this? Paolo ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] virtio-scsi: Change sense buffer size to 252 2014-03-06 10:09 ` Paolo Bonzini @ 2014-03-06 11:22 ` Hannes Reinecke 2014-03-06 11:55 ` Paolo Bonzini 2014-03-07 5:56 ` Fam Zheng 1 sibling, 1 reply; 6+ messages in thread From: Hannes Reinecke @ 2014-03-06 11:22 UTC (permalink / raw) To: Paolo Bonzini, Fam Zheng, linux-kernel; +Cc: linux-scsi, kvm On 03/06/2014 11:09 AM, Paolo Bonzini wrote: > Il 06/03/2014 09:47, Fam Zheng ha scritto: >> According to SPC-4, section 4.5.2.1, 252 is the limit of sense >> data. So >> increase the value. >> >> Signed-off-by: Fam Zheng <famz@redhat.com> >> --- >> include/linux/virtio_scsi.h | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/include/linux/virtio_scsi.h >> b/include/linux/virtio_scsi.h >> index 4195b97..a437f7f 100644 >> --- a/include/linux/virtio_scsi.h >> +++ b/include/linux/virtio_scsi.h >> @@ -28,7 +28,7 @@ >> #define _LINUX_VIRTIO_SCSI_H >> >> #define VIRTIO_SCSI_CDB_SIZE 32 >> -#define VIRTIO_SCSI_SENSE_SIZE 96 >> +#define VIRTIO_SCSI_SENSE_SIZE 252 >> >> /* SCSI command request, followed by data-out */ >> struct virtio_scsi_cmd_req { >> > > Hi Fam, how did you test this? > Is there a specific reason _not_ to use the linux default? The SCSI stack typically limits the sense code to SCSI_SENSE_BUFFERSIZE, so using other values have a limited sense. Literally :-) Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage hare@suse.de +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] virtio-scsi: Change sense buffer size to 252 2014-03-06 11:22 ` Hannes Reinecke @ 2014-03-06 11:55 ` Paolo Bonzini 2014-03-07 5:59 ` Fam Zheng 0 siblings, 1 reply; 6+ messages in thread From: Paolo Bonzini @ 2014-03-06 11:55 UTC (permalink / raw) To: Hannes Reinecke, Fam Zheng, linux-kernel; +Cc: linux-scsi, kvm Il 06/03/2014 12:22, Hannes Reinecke ha scritto: > On 03/06/2014 11:09 AM, Paolo Bonzini wrote: >> Il 06/03/2014 09:47, Fam Zheng ha scritto: >>> According to SPC-4, section 4.5.2.1, 252 is the limit of sense >>> data. So >>> increase the value. >>> >>> Signed-off-by: Fam Zheng <famz@redhat.com> >>> --- >>> include/linux/virtio_scsi.h | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/include/linux/virtio_scsi.h >>> b/include/linux/virtio_scsi.h >>> index 4195b97..a437f7f 100644 >>> --- a/include/linux/virtio_scsi.h >>> +++ b/include/linux/virtio_scsi.h >>> @@ -28,7 +28,7 @@ >>> #define _LINUX_VIRTIO_SCSI_H >>> >>> #define VIRTIO_SCSI_CDB_SIZE 32 >>> -#define VIRTIO_SCSI_SENSE_SIZE 96 >>> +#define VIRTIO_SCSI_SENSE_SIZE 252 >>> >>> /* SCSI command request, followed by data-out */ >>> struct virtio_scsi_cmd_req { >>> >> >> Hi Fam, how did you test this? > > Is there a specific reason _not_ to use the linux default? > The SCSI stack typically limits the sense code to > SCSI_SENSE_BUFFERSIZE, so using other values have a > limited sense. > Literally :-) Indeed I don't think this patch makes a difference. Though I asked not from the SCSI stack perspective, but because right now both virtio-scsi targets (QEMU and vhost-scsi) are also truncating at 96. Paolo ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] virtio-scsi: Change sense buffer size to 252 2014-03-06 11:55 ` Paolo Bonzini @ 2014-03-07 5:59 ` Fam Zheng 0 siblings, 0 replies; 6+ messages in thread From: Fam Zheng @ 2014-03-07 5:59 UTC (permalink / raw) To: Paolo Bonzini; +Cc: Hannes Reinecke, linux-kernel, linux-scsi, kvm On Thu, 03/06 12:55, Paolo Bonzini wrote: > Il 06/03/2014 12:22, Hannes Reinecke ha scritto: > >On 03/06/2014 11:09 AM, Paolo Bonzini wrote: > >>Il 06/03/2014 09:47, Fam Zheng ha scritto: > >>>According to SPC-4, section 4.5.2.1, 252 is the limit of sense > >>>data. So > >>>increase the value. > >>> > >>>Signed-off-by: Fam Zheng <famz@redhat.com> > >>>--- > >>> include/linux/virtio_scsi.h | 2 +- > >>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>> > >>>diff --git a/include/linux/virtio_scsi.h > >>>b/include/linux/virtio_scsi.h > >>>index 4195b97..a437f7f 100644 > >>>--- a/include/linux/virtio_scsi.h > >>>+++ b/include/linux/virtio_scsi.h > >>>@@ -28,7 +28,7 @@ > >>> #define _LINUX_VIRTIO_SCSI_H > >>> > >>> #define VIRTIO_SCSI_CDB_SIZE 32 > >>>-#define VIRTIO_SCSI_SENSE_SIZE 96 > >>>+#define VIRTIO_SCSI_SENSE_SIZE 252 > >>> > >>> /* SCSI command request, followed by data-out */ > >>> struct virtio_scsi_cmd_req { > >>> > >> > >>Hi Fam, how did you test this? > > > >Is there a specific reason _not_ to use the linux default? > >The SCSI stack typically limits the sense code to > >SCSI_SENSE_BUFFERSIZE, so using other values have a > >limited sense. > >Literally :-) OK. So, do we need to lift the limit on other parts of SCSI stack as well? > > Indeed I don't think this patch makes a difference. Though I asked not from > the SCSI stack perspective, but because right now both virtio-scsi targets > (QEMU and vhost-scsi) are also truncating at 96. > Oh, I missed that, I'll do a more thorough review and testing. Thank you for pointing out. Thanks, Fam ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] virtio-scsi: Change sense buffer size to 252 2014-03-06 10:09 ` Paolo Bonzini 2014-03-06 11:22 ` Hannes Reinecke @ 2014-03-07 5:56 ` Fam Zheng 1 sibling, 0 replies; 6+ messages in thread From: Fam Zheng @ 2014-03-07 5:56 UTC (permalink / raw) To: Paolo Bonzini; +Cc: linux-kernel, linux-scsi, kvm On Thu, 03/06 11:09, Paolo Bonzini wrote: > Il 06/03/2014 09:47, Fam Zheng ha scritto: > >According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So > >increase the value. > > > >Signed-off-by: Fam Zheng <famz@redhat.com> > >--- > > include/linux/virtio_scsi.h | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > >diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h > >index 4195b97..a437f7f 100644 > >--- a/include/linux/virtio_scsi.h > >+++ b/include/linux/virtio_scsi.h > >@@ -28,7 +28,7 @@ > > #define _LINUX_VIRTIO_SCSI_H > > > > #define VIRTIO_SCSI_CDB_SIZE 32 > >-#define VIRTIO_SCSI_SENSE_SIZE 96 > >+#define VIRTIO_SCSI_SENSE_SIZE 252 > > > > /* SCSI command request, followed by data-out */ > > struct virtio_scsi_cmd_req { > > > > Hi Fam, how did you test this? > I only tested the basic functionality of virtio-scsi. I'm doing more testing on this and your fix on QEMU side now. Thanks, Fam ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-03-07 5:59 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-03-06 8:47 [PATCH] virtio-scsi: Change sense buffer size to 252 Fam Zheng 2014-03-06 10:09 ` Paolo Bonzini 2014-03-06 11:22 ` Hannes Reinecke 2014-03-06 11:55 ` Paolo Bonzini 2014-03-07 5:59 ` Fam Zheng 2014-03-07 5:56 ` Fam Zheng
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox