* [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
@ 2014-03-07 1:58 Fengguang Wu
2014-03-07 5:03 ` H. Peter Anvin
0 siblings, 1 reply; 18+ messages in thread
From: Fengguang Wu @ 2014-03-07 1:58 UTC (permalink / raw)
To: Andreas Herrmann
Cc: H. Peter Anvin, Ingo Molnar, Borislav Petkov, Yinghai Lu, LKML
[-- Attachment #1: Type: text/plain, Size: 3160 bytes --]
Hi all,
I find the below WARNING shows up only in
qemu-system-x86_64 -cpu qemu64,+smep,+smap
[ 0.018000] Initializing CPU#1
[ 0.018000] masked ExtINT on CPU#1
[ 0.018000] ------------[ cut here ]------------
[ 0.018000] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd+0x752/0x780()
[ 0.018000] WARNING: This combination of AMD processors is not suitable for SMP.
[ 0.018000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc3-next-20140221-04488-gfaa2e6f #1
[ 0.018000] 00000000 00000000 80047ec0 8a1c529a 80047f00 80047ef0 89c44b6f 8a38b9f4
[ 0.018000] 80047f1c 00000000 8a38ba3c 000000dc 89c124a2 89c124a2 9396cfc0 9396d010
[ 0.018000] 9396d03c 80047f08 89c44bee 00000009 80047f00 8a38b9f4 80047f1c 80047f44
[ 0.018000] Call Trace:
[ 0.018000] [<8a1c529a>] dump_stack+0x48/0x60
[ 0.018000] [<89c44b6f>] warn_slowpath_common+0x6f/0x90
[ 0.018000] [<89c124a2>] ? init_amd+0x752/0x780
[ 0.018000] [<89c124a2>] ? init_amd+0x752/0x780
[ 0.018000] [<89c44bee>] warn_slowpath_fmt+0x2e/0x30
[ 0.018000] [<89c124a2>] init_amd+0x752/0x780
[ 0.018000] [<89c104a7>] identify_cpu+0x117/0x4d0
[ 0.018000] [<89c1086f>] identify_secondary_cpu+0xf/0x20
[ 0.018000] [<89c289ed>] smp_store_cpu_info+0x2d/0x40
[ 0.018000] [<89c290ac>] start_secondary+0xec/0x270
[ 0.018000] ---[ end trace 129d9276306a64a7 ]---
Bisect shows that it predates Linux 3.0:
git bisect good faa2e6fb0a98c9caa8995acf3222db9f7f029395 # 05:42 10+ 17 Add linux-next specific files for 20140221
git bisect bad faa2e6fb0a98c9caa8995acf3222db9f7f029395 # 05:45 8- 20 Add linux-next specific files for 20140221
git bisect bad 5047a5b231a24b15d06958cefb54858d77debd22 # 05:46 0- 10 Merge remote-tracking branch 'llvmlinux/for-next'
git bisect bad d8ec26d7f8287f5788a494f56e8814210f0e64be # 05:46 0- 7 Linux 3.13
git bisect bad 5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52 # 05:46 0- 16 Linux 3.12
git bisect bad 6e4664525b1db28f8c4e1130957f70a94c19213e # 05:46 0- 74 Linux 3.11
git bisect bad 8bb495e3f02401ee6f76d1b1d77f3ac9f079e376 # 05:46 0- 77 Linux 3.10
git bisect bad c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1 # 05:53 42- 2 Linux 3.9
git bisect bad 19f949f52599ba7c3f67a5897ac6be14bfcb1200 # 05:57 2- 3 Linux 3.8
git bisect bad 29594404d7fe73cd80eaa4ee8c43dcc53970c60e # 06:18 125- 64 Linux 3.7
git bisect bad a0d271cbfed1dd50278c6b06bead3d00ba0a88f9 # 06:26 35- 20 Linux 3.6
git bisect bad 28a33cbc24e4256c143dce96c7d93bf423229f92 # 06:30 6- 5 Linux 3.5
git bisect bad 76e10d158efb6d4516018846f60c2ab5501900bc # 06:36 62- 39 Linux 3.4
git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7 # 06:46 87- 33 Linux 3.3
git bisect bad 805a6af8dba5dfdd35ec35dc52ec0122400b2610 # 06:52 23- 10 Linux 3.2
git bisect bad c3b92c8787367a8bb53d57d9789b558f1295cc96 # 07:14 525- 201 Linux 3.1
git bisect bad 02f8c6aee8df3cdc935e9bdd4f2d020306035dbe # 07:29 248- 105 Linux 3.0
Thanks,
Fengguang
[-- Attachment #2: dmesg-yocto-roam-17:20140222002312:i386-randconfig-x4-02212316:3.14.0-rc3-next-20140221-04488-gfaa2e6f:1 --]
[-- Type: text/plain, Size: 81493 bytes --]
early console in setup code
Probing EDD (edd=off to disable)... ok
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.14.0-rc3-next-20140221-04488-gfaa2e6f (kbuild@xian) (gcc version 4.8.1 (Debian 4.8.1-8) ) #1 SMP Sat Feb 22 00:12:46 CST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0affffff]
[ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x13800000-0x13bfffff]
[ 0.000000] [mem 0x13800000-0x13bfffff] page 4k
[ 0.000000] BRK [0x0ab21000, 0x0ab21fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x10000000-0x137fffff]
[ 0.000000] [mem 0x10000000-0x137fffff] page 4k
[ 0.000000] BRK [0x0ab22000, 0x0ab22fff] PGTABLE
[ 0.000000] BRK [0x0ab23000, 0x0ab23fff] PGTABLE
[ 0.000000] BRK [0x0ab24000, 0x0ab24fff] PGTABLE
[ 0.000000] BRK [0x0ab25000, 0x0ab25fff] PGTABLE
[ 0.000000] BRK [0x0ab26000, 0x0ab26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[ 0.000000] [mem 0x00100000-0x0fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff]
[ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k
[ 0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff]
[ 0.000000] ACPI: RSDP 0x000FD930 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0x13FFFF40 000040
[ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 319MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 13ffe000
[ 0.000000] low ram: 0 - 13ffe000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00001000-0x13ffdfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x13ffdfff]
[ 0.000000] On node 0 totalpages: 81820
[ 0.000000] Normal zone: 720 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 81820 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffb000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0x14000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 331 pages/cpu @936dc000 s1339400 r0 d16376 u1355776
[ 0.000000] pcpu-alloc: s1339400 r0 d16376 u1355776 alloc=331*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81100
[ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-x4-02212316/next:master/.vmlinuz-faa2e6fb0a98c9caa8995acf3222db9f7f029395-20140222001515-4-roam branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-x4-02212316/faa2e6fb0a98c9caa8995acf3222db9f7f029395/vmlinuz-3.14.0-rc3-next-20140221-04488-gfaa2e6f
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 302168K/327280K available (5944K kernel code, 555K rwdata, 2340K rodata, 1740K init, 4704K bss, 25112K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0x947fe000 - 0xff7fe000 (1712 MB)
[ 0.000000] lowmem : 0x80000000 - 0x93ffe000 ( 319 MB)
[ 0.000000] .init : 0x8a4a4000 - 0x8a657000 (1740 kB)
[ 0.000000] .data : 0x8a1ce579 - 0x8a4a3e40 (2902 kB)
[ 0.000000] .text : 0x89c00000 - 0x8a1ce579 (5945 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]
[ 0.000000]
[ 0.000000]
[ 0.000000]
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=80090000 soft=80092000
[ 0.000000] ACPI: Core revision 20140114
[ 0.000000] ACPI: All ACPI Tables successfully acquired
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3807 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2892.909 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.018000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5785.81 BogoMIPS (lpj=2892909)
[ 0.020283] pid_max: default: 32768 minimum: 301
[ 0.025233] Mount-cache hash table entries: 512
[ 0.047707] Initializing cgroup subsys debug
[ 0.048567] Initializing cgroup subsys devices
[ 0.049360] Initializing cgroup subsys perf_event
[ 0.061000] mce: CPU supports 10 MCE banks
[ 0.071932] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.071932] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.071932] tlb_flushall_shift: -1
[ 0.076482] debug: unmapping init [mem 0x8a657000-0x8a65cfff]
[ 0.123306] Getting VERSION: 50011
[ 0.123680] Getting VERSION: 50011
[ 0.124218] Getting ID: 0
[ 0.124383] Getting ID: f000000
[ 0.124565] Getting LVT0: 8700
[ 0.124722] Getting LVT1: 8400
[ 0.125268] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.127137] enabled ExtINT on CPU#0
[ 0.131724] ENABLING IO-APIC IRQs
[ 0.132377] init IO_APIC IRQs
[ 0.133237] apic 0 pin 0 not connected
[ 0.136265] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.139130] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.139662] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.140319] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.141000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.141183] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.141560] apic 0 pin 16 not connected
[ 0.141708] apic 0 pin 17 not connected
[ 0.141858] apic 0 pin 18 not connected
[ 0.142000] apic 0 pin 19 not connected
[ 0.142000] apic 0 pin 20 not connected
[ 0.142000] apic 0 pin 21 not connected
[ 0.142000] apic 0 pin 22 not connected
[ 0.142000] apic 0 pin 23 not connected
[ 0.142000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152749] smpboot: CPU0: AMD QEMU Virtual CPU version 1.6.0 (fam: 06, model: 02, stepping: 03)
[ 0.155199] Using local APIC timer interrupts.
[ 0.155199] calibrating APIC timer ...
[ 0.157000] ... lapic delta = 8396380
[ 0.157000] ... PM-Timer delta = 480883
[ 0.157000] APIC calibration not consistent with PM-Timer: 134ms instead of 100ms
[ 0.157000] APIC delta adjusted to PM-Timer: 6249998 (8396380)
[ 0.157000] TSC delta adjusted to PM-Timer: 289295649 (388645915)
[ 0.157000] ..... delta 6249998
[ 0.157000] ..... mult: 268435370
[ 0.157000] ..... calibration result: 999999
[ 0.157000] ..... CPU clock speed is 2892.0956 MHz.
[ 0.157000] ..... host bus clock speed is 999.0999 MHz.
[ 0.159344] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.160763] Failed to access perfctr msr (MSR c0010004 is 0)
[ 0.231401] CPU 1 irqstacks, hard=80062000 soft=80064000
[ 0.231736] x86: Booting SMP configuration:
[ 0.232214] .... node #0, CPUs: #1
[ 0.018000] Initializing CPU#1
[ 0.018000] masked ExtINT on CPU#1
[ 0.018000] ------------[ cut here ]------------
[ 0.018000] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd+0x752/0x780()
[ 0.018000] WARNING: This combination of AMD processors is not suitable for SMP.
[ 0.018000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc3-next-20140221-04488-gfaa2e6f #1
[ 0.018000] 00000000 00000000 80047ec0 8a1c529a 80047f00 80047ef0 89c44b6f 8a38b9f4
[ 0.018000] 80047f1c 00000000 8a38ba3c 000000dc 89c124a2 89c124a2 9396cfc0 9396d010
[ 0.018000] 9396d03c 80047f08 89c44bee 00000009 80047f00 8a38b9f4 80047f1c 80047f44
[ 0.018000] Call Trace:
[ 0.018000] [<8a1c529a>] dump_stack+0x48/0x60
[ 0.018000] [<89c44b6f>] warn_slowpath_common+0x6f/0x90
[ 0.018000] [<89c124a2>] ? init_amd+0x752/0x780
[ 0.018000] [<89c124a2>] ? init_amd+0x752/0x780
[ 0.018000] [<89c44bee>] warn_slowpath_fmt+0x2e/0x30
[ 0.018000] [<89c124a2>] init_amd+0x752/0x780
[ 0.018000] [<89c104a7>] identify_cpu+0x117/0x4d0
[ 0.018000] [<89c1086f>] identify_secondary_cpu+0xf/0x20
[ 0.018000] [<89c289ed>] smp_store_cpu_info+0x2d/0x40
[ 0.018000] [<89c290ac>] start_secondary+0xec/0x270
[ 0.018000] ---[ end trace 129d9276306a64a7 ]---
[ 0.018000] Disabling lock debugging due to kernel taint
[ 0.018000] calibrate_delay_direct() dropping max bogoMips estimate 3 = 10501652
[ 0.338445] x86: Booted up 1 node, 2 CPUs
[ 0.338730] ----------------
[ 0.339058] | NMI testsuite:
[ 0.339188] --------------------
[ 0.339438] remote IPI: ok |
[ 0.349143] local IPI: ok |
[ 0.353753] --------------------
[ 0.353913] Good, all 2 testcases passed! |
[ 0.354058] ---------------------------------
[ 0.354467] smpboot: Total of 2 processors activated (22886.04 BogoMIPS)
[ 0.434640] regulator-dummy: no parameters
[ 0.441180] NET: Registered protocol family 16
[ 0.465460] EISA bus registered
[ 0.465950] cpuidle: using governor ladder
[ 0.472080] ACPI: bus type PCI registered
[ 0.477661] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0
[ 0.478128] PCI: Using configuration type 1 for base access
[ 0.805894] gpio-f7188x: Not a Fintek device at 0x0000002e
[ 0.806503] gpio-f7188x: Not a Fintek device at 0x0000004e
[ 0.816192] ACPI: Added _OSI(Module Device)
[ 0.816423] ACPI: Added _OSI(Processor Device)
[ 0.818051] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.818241] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.077062] ACPI: Interpreter enabled
[ 1.078315] ACPI: (supports S0 S5)
[ 1.078668] ACPI: Using IOAPIC for interrupt routing
[ 1.080816] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.394000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.396207] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 1.397224] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.414075] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 1.417123] PCI host bridge to bus 0000:00
[ 1.417718] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.418150] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.418492] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.418720] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.419068] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 1.420894] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 1.432085] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 1.441546] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 1.448641] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf]
[ 1.458472] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 1.459877] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 1.460116] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 1.468841] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 1.471101] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 1.474056] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 1.484085] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 1.491571] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 1.495000] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
[ 1.497075] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 1.506221] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 1.514174] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 1.516202] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
[ 1.518067] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[ 1.535572] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 1.537070] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf]
[ 1.539076] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[ 1.556564] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[ 1.558073] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff]
[ 1.560070] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff]
[ 1.578249] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[ 1.580073] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f]
[ 1.583080] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff]
[ 1.601486] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[ 1.603075] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f]
[ 1.605072] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff]
[ 1.622148] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[ 1.624203] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf]
[ 1.626070] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff]
[ 1.644262] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000
[ 1.645639] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f]
[ 1.660810] pci_bus 0000:00: on NUMA node 0
[ 1.685845] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 1.695459] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.703861] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.712598] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 1.715786] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 1.739000] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 1.769000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.769182] vgaarb: loaded
[ 1.769334] vgaarb: bridge control possible 0000:00:02.0
[ 1.805436] pps_core: LinuxPPS API ver. 1 registered
[ 1.806057] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.807239] PTP clock support registered
[ 1.815053] PCI: Using ACPI for IRQ routing
[ 1.815538] PCI: pci_cache_line_size set to 64 bytes
[ 1.817052] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.817539] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff]
[ 1.836243] irda_init()
[ 1.840559] NET: Registered protocol family 23
[ 1.842732] NET: Registered protocol family 8
[ 1.843089] NET: Registered protocol family 20
[ 1.846138] nfc: nfc_init: NFC Core ver 0.1
[ 1.848761] NET: Registered protocol family 39
[ 1.856702] Switched to clocksource hpet
[ 1.860499] pnp: PnP ACPI init
[ 1.861633] ACPI: bus type PNP registered
[ 1.866344] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[ 1.869159] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.870508] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[ 1.871931] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.874367] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[ 1.875899] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.878973] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[ 1.879640] pnp 00:03: [dma 2]
[ 1.881520] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.896050] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[ 1.897562] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.899466] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[ 1.900854] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.915030] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.920780] pnp: PnP ACPI: found 7 devices
[ 1.921029] ACPI: bus type PNP unregistered
[ 1.985435] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.985711] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.985964] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.986164] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 1.987459] NET: Registered protocol family 2
[ 2.008626] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.010532] TCP bind hash table entries: 4096 (order: 5, 180224 bytes)
[ 2.014214] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.015706] TCP: reno registered
[ 2.016218] UDP hash table entries: 256 (order: 2, 24576 bytes)
[ 2.017198] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[ 2.021829] NET: Registered protocol family 1
[ 2.035955] RPC: Registered named UNIX socket transport module.
[ 2.036226] RPC: Registered udp transport module.
[ 2.036524] RPC: Registered tcp transport module.
[ 2.036807] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.037150] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 2.037560] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 2.038164] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.038871] pci 0000:00:02.0: Boot video device
[ 2.039467] PCI: CLS 0 bytes, default 64
[ 2.063151] Unpacking initramfs...
[ 4.906171] debug: unmapping init [mem 0x93cbd000-0x93feffff]
[ 21.185976] DMA-API: preallocated 65536 debug entries
[ 21.186219] DMA-API: debugging enabled by kernel config
[ 21.280370] Machine check injector initialized
[ 21.998552] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[ 22.000060] NatSemi SCx200 Driver
[ 22.005141] spin_lock-torture:--- Start of test: nwriters_stress=4 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[ 22.007213] spin_lock-torture: Creating torture_shuffle task
[ 22.014054] spin_lock-torture: torture_shuffle task started
[ 22.015096] spin_lock-torture: Creating torture_stutter task
[ 22.030138] spin_lock-torture: Creating lock_torture_writer task
[ 22.031083] spin_lock-torture: torture_stutter task started
[ 22.053128] spin_lock-torture: Creating lock_torture_writer task
[ 22.053978] spin_lock-torture: lock_torture_writer task started
[ 22.063181] spin_lock-torture: Creating lock_torture_writer task
[ 22.063368] spin_lock-torture: lock_torture_writer task started
[ 22.081202] spin_lock-torture: Creating lock_torture_writer task
[ 22.082898] spin_lock-torture: lock_torture_writer task started
[ 22.089413] spin_lock-torture: lock_torture_writer task started
[ 22.090180] spin_lock-torture: Creating lock_torture_stats task
[ 22.126163] spin_lock-torture: lock_torture_stats task started
[ 22.229920] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 22.285469] NFS: Registering the id_resolver key type
[ 22.288182] Key type id_resolver registered
[ 22.288585] Key type id_legacy registered
[ 22.289041] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 22.289606] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.301213] Key type cifs.idmap registered
[ 22.328482] fuse init (API version 7.22)
[ 22.333558] 9p: Installing v9fs 9p2000 file system support
[ 22.334453] msgmni has been set to 590
[ 23.353572] alg: No test for crc32 (crc32-table)
[ 23.387552] alg: No test for lz4 (lz4-generic)
[ 23.401393] alg: No test for stdrng (krng)
[ 23.671095] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 23.695917] NET: Registered protocol family 38
[ 23.696847] Key type asymmetric registered
[ 23.697082] Asymmetric key parser 'x509' registered
[ 23.697806] test_string_helpers: Running tests...
[ 23.766287] no IO addresses supplied
[ 23.786802] hgafb: HGA card not detected.
[ 23.787559] hgafb: probe of hgafb.0 failed with error -22
[ 24.120000] uvesafb: VGABIOS Cirrus extension, VGABIOS Cirrus extension, 1.0, OEM: VGABIOS Cirrus extension, VBE v2.0
[ 24.250402] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 24.254864] uvesafb: VBE state buffer size cannot be determined (eax=0x14f, err=0)
[ 24.258097] uvesafb: scrolling: redraw
[ 24.309467] uvesafb: framebuffer at 0xfc000000, mapped to 0x94900000, using 4096k, total 4096k
[ 24.309874] fb0: VESA VGA frame buffer device
[ 24.325838] ipmi message handler version 39.2
[ 24.326203] ipmi device interface
[ 24.335549] IPMI System Interface driver.
[ 24.338031] ipmi_si: Adding default-specified kcs state machine
[ 24.338578] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 24.340208] ipmi_si: Interface detection failed
[ 24.356310] ipmi_si: Adding default-specified smic state machine
[ 24.356310] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[ 24.356310] ipmi_si: Interface detection failed
[ 24.359711] ipmi_si: Adding default-specified bt state machine
[ 24.359968] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[ 24.360301] ipmi_si: Interface detection failed
[ 24.366143] ipmi_si: Unable to find any System Interface(s)
[ 24.366599] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 24.418821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 24.419400] ACPI: Power Button [PWRF]
[ 27.452883] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 27.529203] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 27.643938] DoubleTalk PC - not found
[ 27.664226] ppdev: user-space parallel port driver
[ 27.668400] scx200_gpio: no SCx200 gpio present
[ 27.670227] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 27.670925] platform pc8736x_gpio.0: no device found
[ 27.682061] nsc_gpio initializing
[ 27.682580] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 27.719003] [drm] Initialized drm 1.1.0 20060810
[ 27.728999] parport_pc 00:04: reported by Plug and Play ACPI
[ 27.734024] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[ 27.924136] dummy-irq: no IRQ given. Use irq=N
[ 27.970107] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 28.049511] LocalTalk card not found; 220 = ff, 240 = ff.
[ 28.052416] AX.25: Z8530 SCC driver version 3.0.dl1bke
[ 28.093063] YAM driver version 0.8 by F1OAT/F6FBB
[ 28.231226] AX.25: bpqether driver version 004
[ 28.232039] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 28.232039] baycom_ser_fdx: version 0.10
[ 28.486193] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[ 28.488979] hdlcdrv: version 0.8
[ 28.489152] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 28.489152] baycom_ser_hdx: version 0.10
[ 28.707954] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 28.707954] baycom_par: version 0.9
[ 28.901223] w83977af_init()
[ 28.902471] w83977af_open()
[ 28.903154] w83977af_probe()
[ 28.903571] w83977af_probe(), Wrong chip version
[ 28.904042] w83977af_probe()
[ 28.904172] w83977af_probe(), Wrong chip version
[ 28.960113] fb1: cfag12864b frame buffer device
[ 28.985104] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 28.999213] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.000524] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.022636] mousedev: PS/2 mouse device common for all mice
[ 29.073969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 29.141142] i2c-parport-light: adapter type unspecified
[ 29.149132] isa i2c-pca-isa.0: Please specify I/O base
[ 29.156157] scx200_i2c: no SCx200 gpio pins available
[ 29.157182] pps_parport: parallel port PPS client
[ 29.159136] parport0: no more devices allowed
[ 29.160158] pps_parport: couldn't register with parport0
[ 29.167187] Driver for 1-wire Dallas network protocol.
[ 29.208159] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 29.217970] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 29.226171] w83781d: Detection failed at step 2
[ 29.438146] pc87360: PC8736x not detected, module not inserted
[ 29.439142] sch56xx_common: Unsupported device id: 0xff
[ 29.439572] sch56xx_common: Unsupported device id: 0xff
[ 29.461215] mixcomwd: No card detected, or port not available
[ 29.463039] acquirewdt: WDT driver for Acquire single board computer initialising
[ 29.467084] acquirewdt: I/O address 0x0043 already in use
[ 29.468502] acquirewdt: probe of acquirewdt failed with error -5
[ 29.469130] advantechwdt: WDT driver for Advantech single board computer initialising
[ 29.487061] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[ 29.488570] sc520_wdt: cannot register miscdev on minor=130 (err=-16)
[ 29.492894] ib700wdt: WDT driver for IB700 single board computer initialising
[ 29.497282] ib700wdt: START method I/O 443 is not available
[ 29.498057] ib700wdt: probe of ib700wdt failed with error -5
[ 29.499158] pc87413_wdt: Version 1.1 at io 0x2E
[ 29.499599] pc87413_wdt: cannot register miscdev on minor=130 (err=-16)
[ 29.501028] sbc60xxwdt: I/O address 0x0443 already in use
[ 29.501563] sbc8360: failed to register misc device
[ 29.502074] sbc7240_wdt: I/O address 0x0443 already in use
[ 29.502570] w83697hf_wdt: WDT driver for W83697HF/HG initializing
[ 29.503125] w83697hf_wdt: watchdog not found at address 0x2e
[ 29.503557] w83697hf_wdt: No W83697HF/HG could be found
[ 29.504010] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising
[ 29.504576] w83697ug_wdt: No W83697UG/UF could be found
[ 29.506041] w83877f_wdt: I/O address 0x0443 already in use
[ 29.506275] machzwd: MachZ ZF-Logic Watchdog driver initializing
[ 29.506637] machzwd: no ZF-Logic found
[ 29.507114] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16)
[ 29.523188] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[ 29.524515] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[ 29.529145] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[ 29.532281] platform eisa.0: Probing EISA bus 0
[ 29.533082] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 29.537132] cpufreq-nforce2: No nForce2 chipset.
[ 29.581210] parport0: no more devices allowed
[ 29.582184] panel: panel_attach: port->number=0 parport=0, parport_register_device() failed
[ 29.583225] panel: driver version 0.9.5 not yet registered
[ 29.685187] FPGA DOWNLOAD --->
[ 29.686122] built at Sat Feb 22 00:06:27 2014 UTC
[ 29.687033] FPGA image file name: xlinx_fpga_firmware.bit
[ 29.723179] GPIO INIT FAIL!!
[ 29.758167] goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO.
[ 29.760135] goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16
[ 30.040217] GACT probability NOT on
[ 30.042137] Mirror/redirect action on
[ 30.043165] Simple TC action Loaded
[ 30.117002] netem: version 1.3
[ 30.119141] u32 classifier
[ 30.120076] Performance counters on
[ 30.120194] input device check on
[ 30.121120] Actions configured
[ 30.123073] gre: GRE over IPv4 demultiplexor driver
[ 30.125056] ip_gre: GRE over IPv4 tunneling driver
[ 30.272190] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 30.312209] IPv4 over IPSec tunneling driver
[ 30.336194] TCP: bic registered
[ 30.336576] TCP: highspeed registered
[ 30.336931] TCP: htcp registered
[ 30.337058] TCP: vegas registered
[ 30.337177] TCP: veno registered
[ 30.337927] TCP: scalable registered
[ 30.338086] TCP: lp registered
[ 30.338223] TCP: yeah registered
[ 30.338960] Initializing XFRM netlink socket
[ 30.340630] NET: Registered protocol family 10
[ 30.384454] mip6: Mobile IPv6
[ 30.384960] sit: IPv6 over IPv4 tunneling driver
[ 30.446036] NET: Registered protocol family 17
[ 30.457096] NET: Registered protocol family 15
[ 30.461066] NET: Registered protocol family 4
[ 30.464086] NET: Registered protocol family 5
[ 30.987562] NET: Registered protocol family 11
[ 30.989054] NET: Registered protocol family 3
[ 31.040621] NET: Registered protocol family 33
[ 31.042191] Key type rxrpc registered
[ 31.043228] Key type rxrpc_s registered
[ 31.067979] RxRPC: Registered security type 2 'rxkad'
[ 31.069697] lec:lane_module_init: lec.c: initialized
[ 31.070203] mpoa:atm_mpoa_init: mpc.c: initialized
[ 31.071932] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 31.076574] DECnet: Routing cache hash table of 256 buckets, 11Kbytes
[ 31.078004] NET: Registered protocol family 12
[ 31.095975] rds_page_remainder_cpu_notify(): cpu 0 action 0x7
[ 31.096684] rds_page_remainder_cpu_notify(): cpu 1 action 0x7
[ 31.097083] tipc: Activated (version 2.0.0)
[ 31.110076] NET: Registered protocol family 30
[ 31.136188] tipc: Started in single node mode
[ 31.142128] 9pnet: Installing 9P2000 support
[ 31.144890] Key type dns_resolver registered
[ 31.145548] Key type ceph registered
[ 31.147203] libceph: loaded (mon/osd proto 15/24)
[ 31.190543] batman_adv: B.A.T.M.A.N. advanced 2014.1.0 (compatibility version 15) loaded
[ 31.191217] openvswitch: Open vSwitch switching datapath
[ 31.200033] mpls_gso: MPLS GSO support
[ 31.248045]
[ 31.248045] printing PIC contents
[ 31.248514] ... PIC IMR: ffff
[ 31.248639] ... PIC IRR: 1013
[ 31.249515] ... PIC ISR: 0000
[ 31.249653] ... PIC ELCR: 0c00
[ 31.250139] printing local APIC contents on CPU#0/0:
[ 31.250465] ... APIC ID: 00000000 (0)
[ 31.250465] ... APIC VERSION: 00050011
[ 31.250465] ... APIC TASKPRI: 00000000 (00)
[ 31.250465] ... APIC ARBPRI: 00000000 (00)
[ 31.250465] ... APIC PROCPRI: 00000000
[ 31.250465] ... APIC LDR: 01000000
[ 31.250465] ... APIC DFR: f0000000
[ 31.250465] ... APIC SPIV: 000001ff
[ 31.250465] ... APIC ISR field:
[ 31.250465] 0000000000000000000000000000000000000000000000000000000000000000
[ 31.250465] ... APIC TMR field:
[ 31.250465] 0000000000000000000000000000000000000000000000000000000000000000
[ 31.250465] ... APIC IRR field:
[ 31.250465] 0000000000000000000000000000000000000000000000000000000000008000
[ 31.250465] ... APIC ESR: 00000000
[ 31.250465] ... APIC ICR: 000008fd
[ 31.250465] ... APIC ICR2: 02000000
[ 31.250465] ... APIC LVTT: 000200ef
[ 31.250465] ... APIC LVTPC: 00010000
[ 31.250465] ... APIC LVT0: 00010700
[ 31.250465] ... APIC LVT1: 00000400
[ 31.250465] ... APIC LVTERR: 000000fe
[ 31.250465] ... APIC TMICT: 0000f423
[ 31.250465] ... APIC TMCCT: 000009c5
[ 31.250465] ... APIC TDCR: 00000003
[ 31.250465]
[ 31.259215] number of MP IRQ sources: 15.
[ 31.260482] number of IO-APIC #0 registers: 24.
[ 31.260619] testing the IO APIC.......................
[ 31.264628] IO APIC #0......
[ 31.265048] .... register #00: 00000000
[ 31.265170] ....... : physical APIC id: 00
[ 31.265556] ....... : Delivery Type: 0
[ 31.266542] ....... : LTS : 0
[ 31.267037] .... register #01: 00170011
[ 31.267162] ....... : max redirection entries: 17
[ 31.267523] ....... : PRQ implemented: 0
[ 31.267986] ....... : IO APIC version: 11
[ 31.268173] .... register #02: 00000000
[ 31.268520] ....... : arbitration: 00
[ 31.269440] .... IRQ redirection table:
[ 31.269639] 1 0 0 0 0 0 0 00
[ 31.270110] 0 0 0 0 0 1 1 31
[ 31.270282] 0 0 0 0 0 1 1 30
[ 31.270588] 0 0 0 0 0 1 1 33
[ 31.271048] 1 0 0 0 0 1 1 34
[ 31.271177] 1 1 0 0 0 1 1 35
[ 31.272310] 0 0 0 0 0 1 1 36
[ 31.272667] 0 0 0 0 0 1 1 37
[ 31.273552] 0 0 0 0 0 1 1 38
[ 31.274509] 0 1 0 0 0 1 1 39
[ 31.275177] 1 1 0 0 0 1 1 3A
[ 31.275536] 1 1 0 0 0 1 1 3B
[ 31.276530] 0 0 0 0 0 1 1 3C
[ 31.277127] 0 0 0 0 0 1 1 3D
[ 31.277468] 0 0 0 0 0 1 1 3E
[ 31.277612] 0 0 0 0 0 1 1 3F
[ 31.278072] 1 0 0 0 0 0 0 00
[ 31.278228] 1 0 0 0 0 0 0 00
[ 31.278672] 1 0 0 0 0 0 0 00
[ 31.279567] 1 0 0 0 0 0 0 00
[ 31.280508] 1 0 0 0 0 0 0 00
[ 31.280894] 1 0 0 0 0 0 0 00
[ 31.281045] 1 0 0 0 0 0 0 00
[ 31.281171] 1 0 0 0 0 0 0 00
[ 31.281593] IRQ to pin mappings:
[ 31.282049] IRQ0 -> 0:2
[ 31.282274] IRQ1 -> 0:1
[ 31.282562] IRQ3 -> 0:3
[ 31.283466] IRQ4 -> 0:4
[ 31.283575] IRQ5 -> 0:5
[ 31.283956] IRQ6 -> 0:6
[ 31.284071] IRQ7 -> 0:7
[ 31.284172] IRQ8 -> 0:8
[ 31.284504] IRQ9 -> 0:9
[ 31.284635] IRQ10 -> 0:10
[ 31.284998] IRQ11 -> 0:11
[ 31.285115] IRQ12 -> 0:12
[ 31.285219] IRQ13 -> 0:13
[ 31.285552] IRQ14 -> 0:14
[ 31.286191] IRQ15 -> 0:15
[ 31.286527] .................................... done.
[ 31.287284] Using IPI No-Shortcut mode
[ 31.296902] registered taskstats version 1
[ 31.297093] kAFS: Red Hat AFS client v0.1 registering.
[ 31.307126] kAFS: failed to register: -12
[ 31.442710] Key type trusted registered
[ 31.549391] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 31.713400] debug: unmapping init [mem 0x8a4a4000-0x8a656fff]
[ 31.732690] Write protecting the kernel text: 5948k
[ 31.738630] Write protecting the kernel read-only data: 2344k
mount: mounting proc on /proc failed: No such device
/etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: No such file or directory
Please wait: booting...
mount: mounting proc on /proc failed: No such device
grep: /proc/filesystems: No such file or directory
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
bootlogd.
mount: can't read '/proc/mounts': No such file or directory
/etc/rcS.d/S37populate-volatile.sh: line 172: /proc/cmdline: No such file or directory
grep: /proc/filesystems: No such file or directory
Configuring network interfaces... ifup: can't open '/var/run/ifstate': No such file or directory
done.
hwclock: can't open '/dev/misc/rtc': No such file or directory
Running postinst /etc/rpm-postinsts/100...
mount: no /proc/mounts
wfg: skip syslogd
Kernel tests: Boot OK!
Kernel tests: Boot OK!
mount: mounting proc on /proc failed: No such device
/etc/rc5.d/S99-rc.local: line 19: /proc/189/oom_score_adj: No such file or directory
sed: /lib/modules/3.14.0-rc3-next-20140221-04488-gfaa2e6f/modules.dep: No such file or directory
xargs: modprobe: No such file or directory
run-parts: /etc/kernel-tests/01-modprobe exited with code 127
grep: /proc/cmdline: No such file or directory
grep: /proc/cmdline: No such file or directory
Trinity v1.4pre Dave Jones <davej@redhat.com>
Trinity v1.4pre Dave Jones <davej@redhat.com>
Trinity v1.4pre Dave Jones <davej@redhat.com>
[ 55.109084] random: trinity urandom read with 17 bits of entropy available
Done parsing arguments.
## couldn't open logfile trinity.log
Done parsing arguments.
[init] Marking syscall get_robust_list (312) as to be disabled.
Done parsing arguments.
Marking all syscalls as enabled.
[init] Enabled 351 syscalls. Disabled 0 syscalls.
Marking all syscalls as enabled.
[init] Disabling syscalls marked as disabled by command line options
[init] Marked syscall get_robust_list (312) as deactivated.
[init] Enabled 350 syscalls. Disabled 1 syscalls.
DANGER: RUNNING AS ROOT.
Unless you are running in a virtual machine, this could cause serious problems such as overwriting CMOS
or similar which could potentially make this machine unbootable without a firmware reset.
ctrl-c now unless you really know what you are doing.
Continuing in 10 seconds.
Unless you are running in a virtual machine, this could cause serious problems such as overwriting CMOS
or similar which could potentially make this machine unbootable without a firmware reset.
ctrl-c now unless you really know what you are doing.
Continuing in 10 seconds.
[init] Marking syscall get_robust_list (312) as to be disabled.
Done parsing arguments.
## couldn't open logfile trinity.log
Continuing in 9 seconds.
Couldn't read pid_max from proc
[init] Using pid_max = 32768
[init] Kernel was tainted on startup. Will ignore flags that are already set.
[init] Started watchdog process, PID is 207
[main] Main thread is alive.
[main] Couldn't find socket cachefile. Regenerating.
[main] Setsockopt(1 12 80d1000 4) on fd 7 [2:3:38]
[main] Setsockopt(1 20 80d1000 4) on fd 8 [3:2:0]
[main] Setsockopt(100 1 80d1000 4) on fd 9 [4:2:82]
[main] Setsockopt(1 23 80d1000 4) on fd 12 [10:3:46]
[main] Setsockopt(105 b 80d1000 4) on fd 13 [12:5:2]
[main] Setsockopt(10e 4 80d1000 bb) on fd 14 [16:3:0]
fopen: No such file or directory
Couldn't read pid_max from proc
[init] Using pid_max = 32768
[main] Setsockopt(1 2 80d1000 4) on fd 16 [20:10:69]
[main] Setsockopt(10a 4 80d1000 ec) on fd 17 [23:1:173]
[ 66.773867] irttp_open_tsap(), invalid tsap!
[ 66.774135] irda_open_tsap(), Unable to allocate TSAP!
[ 66.775065] irias_delete_object(), object already removed!
[init] Kernel was tainted on startup. Will ignore flags that are already set.
[main] Setsockopt(1 2d 80d1000 4) on fd 20 [1:5:1]
[main] Setsockopt(88 1 80d1000 4) on fd 21 [2:2:17]
[main] Setsockopt(1 b 80d1000 8b) on fd 22 [3:5:202]
[init] Started watchdog process, PID is 209
[main] Setsockopt(1 2f 80d1000 4) on fd 23 [4:2:186]
[main] Setsockopt(1 12 80d1000 4) on fd 25 [8:5:62]
[main] Setsockopt(11 1 80d1000 4) on fd 26 [10:2:0]
[main] Setsockopt(1 29 80d1000 d6) on fd 27 [12:1:177]
[main] Main thread is alive.
[main] Setsockopt(1 1d 80d1000 47) on fd 28 [17:2:768]
[main] Setsockopt(1 20 80d1000 c8) on fd 29 [23:1:125]
[main] Setsockopt(1 f 80d1000 4) on fd 31 [39:5:0]
[main] Setsockopt(6 3 80d1000 4) on fd 33 [2:1:6]
[main] Setsockopt(1 23 80d1000 4) on fd 34 [3:2:0]
[main] Setsockopt(1 1d 80d1000 18) on fd 36 [5:3:165]
[main] Setsockopt(1 1d 80d1000 23) on fd 37 [10:1:0]
[main] Setsockopt(10d b 80d1000 4) on fd 38 [12:1:2]
[main] Setsockopt(1 2e 80d1000 4) on fd 39 [16:3:10]
[ 67.339702] sock: process `trinity-main' is using obsolete setsockopt SO_BSDCOMPAT
[main] Setsockopt(1 e 80d1000 4) on fd 41 [20:2:173]
[main] Setsockopt(1 2 80d1000 d6) on fd 42 [23:1:173]
[main] Setsockopt(6 e 0 cc) on fd 43 [30:1:0]
[main] Setsockopt(1 28 80d1000 69) on fd 46 [2:3:51]
[main] Setsockopt(1 2 80d1000 98) on fd 47 [3:2:0]
[main] Setsockopt(1 8 80d1000 88) on fd 48 [4:2:228]
[main] Setsockopt(1 2e 80d1000 4) on fd 49 [5:2:0]
[main] Setsockopt(1 e 80d1000 ab) on fd 50 [8:2:132]
[main] Setsockopt(1 2f 80d1000 4) on fd 51 [10:1:0]
[main] Setsockopt(1 a 80d1000 c0) on fd 53 [16:2:2]
[main] Setsockopt(1 2f 80d1000 4) on fd 55 [20:10:11]
[main] Setsockopt(1 b 80d1000 29) on fd 56 [23:5:17]
[main] Setsockopt(1 2f 80d1000 4) on fd 57 [30:2:0]
[main] Setsockopt(0 20 80cab80 c) on fd 60 [2:3:248]
[main] Setsockopt(101 c 80d1000 19) on fd 61 [3:2:0]
[main] Setsockopt(1 28 80d1000 4) on fd 63 [5:3:138]
[main] Setsockopt(29 18 0 9b) on fd 65 [10:3:65]
[main] Setsockopt(109 c 80d1000 4) on fd 66 [12:1:251]
[main] Setsockopt(1 2b 80d1000 4) on fd 67 [16:2:10]
[main] Setsockopt(1 1 80d1000 f1) on fd 69 [20:4:175]
[main] Setsockopt(1 22 80d1000 bc) on fd 72 [1:2:1]
[main] Setsockopt(1 d 80d1000 8) on fd 74 [3:3:156]
[main] Setsockopt(1 2d 80d1000 4) on fd 75 [4:2:137]
[main] Setsockopt(1 b 80d1000 4) on fd 76 [5:3:216]
[main] Setsockopt(1 2d 80d1000 4) on fd 77 [8:3:180]
[main] Setsockopt(1 a 80d1000 4) on fd 78 [10:1:0]
[main] Setsockopt(1 2b 80d1000 4) on fd 80 [17:2:768]
[main] Setsockopt(1 12 80d1000 4) on fd 81 [20:5:49]
[main] Setsockopt(1 2e 80d1000 65) on fd 82 [23:1:148]
[main] Setsockopt(1 2e 80d1000 4) on fd 84 [39:2:1]
[main] Setsockopt(1 22 80d1000 4) on fd 85 [1:1:1]
[main] Setsockopt(11 1 80d1000 c1) on fd 86 [2:2:17]
[main] Setsockopt(1 1d 80d1000 4) on fd 89 [5:2:0]
[main] Setsockopt(1 28 80d1000 8c) on fd 90 [8:4:21]
[main] Setsockopt(0 1 80d1000 1) on fd 91 [10:2:0]
[main] Setsockopt(1 2b 80d1000 9e) on fd 93 [17:10:768]
[main] Setsockopt(1 2b 80d1000 c3) on fd 95 [23:1:148]
[main] Setsockopt(1 2f 80d1000 9b) on fd 97 [39:2:1]
[main] Setsockopt(1 2 80d1000 5e) on fd 98 [1:2:1]
[main] Setsockopt(1 28 80d1000 1a) on fd 99 [2:3:95]
[main] Setsockopt(101 8 80d1000 7e) on fd 100 [3:3:95]
[main] Setsockopt(100 1 80d1000 4) on fd 101 [4:2:237]
[main] Setsockopt(1 2b 80d1000 ee) on fd 104 [12:1:54]
[main] Setsockopt(107 7 80d1000 4) on fd 106 [17:3:768]
[main] Setsockopt(1 10 80d1000 4) on fd 110 [1:5:1]
[main] Setsockopt(1 2e 80d1000 4) on fd 111 [2:1:6]
[main] Setsockopt(1 2b 80d1000 4) on fd 112 [3:3:6]
[main] Setsockopt(100 1 80d1000 4) on fd 113 [4:2:215]
[main] Setsockopt(1 5 80d1000 4) on fd 114 [5:3:110]
[main] Setsockopt(29 b 80d1000 4) on fd 116 [10:2:0]
[main] Setsockopt(1 2d 80d1000 4) on fd 117 [12:1:14]
[main] Setsockopt(1 d 80d1000 8) on fd 118 [17:10:768]
[main] Setsockopt(1 29 80d1000 4) on fd 119 [20:2:45]
[main] Setsockopt(1 21 80d1000 4) on fd 122 [39:5:0]
[main] Setsockopt(1 8 80d1000 4) on fd 125 [3:5:206]
[main] Setsockopt(1 f 80d1000 4) on fd 126 [4:2:7]
[main] Setsockopt(1 1 80d1000 86) on fd 128 [10:3:15]
[main] Setsockopt(1 2d 80d1000 4) on fd 130 [16:3:2]
[main] Setsockopt(1 24 80d1000 4) on fd 131 [17:2:768]
[main] Setsockopt(1 a 80d1000 4) on fd 132 [20:4:73]
[ 68.440572] irttp_open_tsap(), invalid tsap!
[ 68.442397] irda_open_tsap(), Unable to allocate TSAP!
[ 68.442589] irias_delete_object(), object already removed!
[main] Setsockopt(6 f 80d1000 d1) on fd 134 [30:1:0]
[main] Setsockopt(1 d 80d1000 8) on fd 136 [1:1:1]
[main] Setsockopt(0 7 80d1000 1) on fd 137 [2:1:0]
[main] Setsockopt(1 b 80d1000 69) on fd 139 [4:2:7]
[main] Setsockopt(1 2b 80d1000 53) on fd 140 [5:2:0]
[main] Setsockopt(108 42000004 80d1000 4) on fd 141 [8:5:128]
[main] Setsockopt(11 1 80d1000 9) on fd 142 [10:2:0]
[main] Setsockopt(1 8 80d1000 a2) on fd 143 [12:1:77]
[main] Setsockopt(1 22 80d1000 4) on fd 144 [17:3:768]
[main] Setsockopt(1 c 80d1000 e7) on fd 145 [20:4:199]
[main] Setsockopt(10a a 80d1000 5d) on fd 146 [23:1:59]
[main] Setsockopt(6 1 0 4) on fd 147 [30:1:0]
[main] Setsockopt(1 21 80d1000 19) on fd 149 [1:2:1]
[main] Setsockopt(1 a 80d1000 4) on fd 150 [2:3:252]
[main] Setsockopt(100 1 80d1000 4) on fd 152 [4:2:153]
[main] Setsockopt(1 f 80d1000 4) on fd 153 [5:3:122]
[main] Setsockopt(108 42000004 80d1000 4) on fd 154 [8:10:216]
[main] Setsockopt(29 18 0 e5) on fd 155 [10:2:17]
[main] Setsockopt(105 d 80d1000 4) on fd 156 [12:1:162]
[main] Setsockopt(10e 5 80d1000 5f) on fd 157 [16:2:2]
[main] Setsockopt(1 8 80d1000 4) on fd 158 [17:2:768]
[main] Setsockopt(1 d 80d1000 8) on fd 160 [23:5:123]
[main] Setsockopt(6 14 0 73) on fd 161 [30:1:0]
[main] Setsockopt(1 22 80d1000 4) on fd 162 [39:2:1]
[main] Setsockopt(1 2f 80d1000 5d) on fd 163 [1:1:1]
[main] Setsockopt(1 20 80d1000 4) on fd 164 [2:3:119]
[main] Setsockopt(101 7 80d1000 4) on fd 165 [3:2:0]
[main] Setsockopt(1 9 80d1000 4) on fd 166 [4:2:81]
[main] Setsockopt(1 24 80d1000 4) on fd 168 [8:4:221]
[main] Setsockopt(1 12 80d1000 62) on fd 169 [10:3:122]
[main] Setsockopt(88 b 80d1000 4) on fd 170 [12:1:177]
[main] Setsockopt(1 9 80d1000 4) on fd 173 [23:5:36]
[main] Setsockopt(6 14 0 4) on fd 174 [30:1:0]
[main] Setsockopt(1 8 80d1000 48) on fd 175 [39:1:1]
[main] Setsockopt(1 2 80d1000 4) on fd 176 [1:1:1]
[main] Setsockopt(1 b 80d1000 3a) on fd 177 [2:1:6]
[main] Setsockopt(1 20 80d1000 72) on fd 179 [4:2:242]
[main] Setsockopt(29 13 0 57) on fd 182 [10:3:230]
[main] Setsockopt(1 d 80d1000 8) on fd 183 [12:5:2]
[main] Setsockopt(1 2 80d1000 4) on fd 184 [16:2:6]
[main] Setsockopt(1 24 80d1000 6a) on fd 185 [17:2:768]
[main] Setsockopt(108 42000004 80d1000 4) on fd 186 [20:10:188]
[main] Setsockopt(1 22 80d1000 4) on fd 187 [23:2:0]
[main] Setsockopt(6 1 80d1000 4) on fd 188 [30:1:0]
[main] Setsockopt(1 1 80d1000 d) on fd 189 [39:5:0]
[main] Setsockopt(6 8 80d1000 4) on fd 191 [2:1:6]
[main] Setsockopt(1 e 80d1000 29) on fd 192 [3:3:6]
[main] Setsockopt(1 1 80d1000 4) on fd 193 [4:2:87]
[main] Setsockopt(29 8 0 4) on fd 196 [10:2:0]
[main] Setsockopt(109 b 80d1000 4) on fd 197 [12:5:2]
[main] Setsockopt(10a a 80d1000 4) on fd 200 [23:5:72]
[main] Setsockopt(1 21 80d1000 a1) on fd 201 [30:5:0]
[main] Setsockopt(0 1 80d1000 4) on fd 204 [2:1:0]
[main] Setsockopt(101 c 80d1000 7) on fd 205 [3:2:0]
[main] Setsockopt(100 1 80d1000 4) on fd 206 [4:2:205]
[main] Setsockopt(1 d 80d1000 8) on fd 207 [5:2:0]
[main] Setsockopt(1 22 80d1000 8) on fd 208 [8:5:31]
[main] Setsockopt(1 2e 80d1000 4) on fd 209 [10:1:0]
[main] Setsockopt(6 c 80d1000 4) on fd 210 [12:5:2]
[main] Setsockopt(1 a 80d1000 dd) on fd 211 [17:2:768]
[main] Setsockopt(1 a 80d1000 4) on fd 213 [23:5:203]
[main] Setsockopt(1 2f 80d1000 4) on fd 214 [30:5:0]
[main] Setsockopt(1 2e 80d1000 d3) on fd 215 [39:5:0]
[main] Setsockopt(0 3 80d1000 4) on fd 217 [2:3:160]
[main] Setsockopt(1 7 80d1000 4) on fd 218 [3:3:160]
[main] Setsockopt(1 f 80d1000 4) on fd 221 [8:2:229]
[main] Setsockopt(29 17 0 61) on fd 222 [10:1:0]
[main] Setsockopt(1 9 80d1000 f7) on fd 223 [12:1:178]
[main] Setsockopt(107 9 80d1000 c9) on fd 225 [17:2:768]
[main] Setsockopt(108 42000004 80d1000 4) on fd 226 [20:5:38]
[main] Setsockopt(10a 7 80d1000 4) on fd 227 [23:1:177]
[ 69.369817] irttp_open_tsap(), invalid tsap!
[ 69.370023] irda_open_tsap(), Unable to allocate TSAP!
[ 69.370206] irias_delete_object(), object already removed!
[main] Setsockopt(1 e 80d1000 33) on fd 228 [30:1:0]
[main] Setsockopt(1 2f 80d1000 1f) on fd 229 [39:5:0]
[main] Setsockopt(1 2f 80d1000 4) on fd 230 [1:1:1]
[main] Setsockopt(11 1 80d1000 19) on fd 231 [2:2:0]
[main] Setsockopt(1 6 80d1000 8d) on fd 234 [5:2:0]
[main] Setsockopt(11 1 80d1000 b4) on fd 236 [10:2:0]
[main] Setsockopt(107 b 80d1000 4) on fd 237 [12:5:2]
[main] Setsockopt(1 a 80d1000 dc) on fd 238 [17:2:768]
[main] Setsockopt(1 12 80d1000 4) on fd 240 [23:5:39]
[ 69.520550] irttp_open_tsap(), invalid tsap!
[ 69.520953] irda_open_tsap(), Unable to allocate TSAP!
[ 69.521148] irias_delete_object(), object already removed!
[main] Setsockopt(1 b 80d1000 4) on fd 242 [39:1:1]
[main] Setsockopt(1 2b 80d1000 4) on fd 243 [1:5:1]
[main] Setsockopt(1 f 80d1000 5d) on fd 246 [4:2:207]
[main] Setsockopt(1 2b 80d1000 4) on fd 247 [5:3:12]
[main] Setsockopt(108 42000004 80d1000 4) on fd 248 [8:5:183]
[main] Setsockopt(29 b 80d1000 4) on fd 249 [10:2:17]
[main] Setsockopt(105 b 80d1000 4) on fd 250 [12:1:194]
[main] Setsockopt(107 8 80d1000 4) on fd 251 [17:2:768]
[main] Setsockopt(10a 7 80d1000 35) on fd 252 [23:2:0]
[main] Setsockopt(1 d 80d1000 8) on fd 253 [30:2:0]
[main] Setsockopt(1 f 80d1000 4) on fd 254 [39:1:1]
[main] Setsockopt(1 2e 80d1000 af) on fd 255 [1:5:1]
[main] Setsockopt(1 9 80d1000 58) on fd 257 [3:3:60]
[main] Setsockopt(1 1 80d1000 fb) on fd 258 [4:2:175]
[main] Setsockopt(1 2e 80d1000 12) on fd 259 [5:2:0]
[main] Setsockopt(1 24 80d1000 1c) on fd 260 [8:2:199]
[main] Setsockopt(0 22 80d1000 4) on fd 261 [10:2:17]
[main] Setsockopt(1 2f 80d1000 7b) on fd 262 [12:5:2]
[main] Setsockopt(1 d 80d1000 8) on fd 263 [16:3:0]
[main] Setsockopt(107 11 80d1000 4) on fd 264 [17:3:768]
[main] Setsockopt(1 6 80d1000 4) on fd 265 [23:1:140]
[main] Setsockopt(6 b 0 4) on fd 266 [30:1:0]
[main] Setsockopt(1 a 80d1000 17) on fd 268 [1:2:1]
[main] Setsockopt(1 c 80d1000 4) on fd 269 [2:3:196]
[main] Setsockopt(1 9 80d1000 4) on fd 270 [3:3:196]
[main] Setsockopt(100 1 80d1000 4) on fd 271 [4:2:184]
[main] Setsockopt(1 20 80d1000 4) on fd 273 [8:3:147]
[main] Setsockopt(10a b 80d1000 4) on fd 275 [12:1:224]
[main] Setsockopt(1 b 80d1000 4) on fd 277 [20:5:84]
[main] Setsockopt(1 a 80d1000 55) on fd 278 [23:1:42]
[main] Setsockopt(1 20 80d1000 e2) on fd 280 [39:5:0]
[main] Setsockopt(1 d 80d1000 8) on fd 281 [1:2:1]
[main] Setsockopt(6 8 80d1000 83) on fd 282 [2:1:6]
[main] Setsockopt(1 21 80d1000 91) on fd 283 [3:3:6]
[main] Setsockopt(1 b 80d1000 57) on fd 284 [4:2:35]
[main] Setsockopt(1 1d 80d1000 4) on fd 285 [5:2:0]
[main] Setsockopt(11 1 80d1000 4) on fd 287 [10:2:17]
[main] Setsockopt(84 b 80d1000 4) on fd 288 [12:1:85]
[main] Setsockopt(1 28 80d1000 f1) on fd 290 [20:10:107]
[main] Setsockopt(6 101 0 2d) on fd 292 [30:1:0]
[main] Setsockopt(1 6 80d1000 4) on fd 293 [39:5:0]
[main] Setsockopt(1 2d 80d1000 23) on fd 294 [1:5:1]
[main] Setsockopt(88 1 80d1000 4) on fd 295 [2:2:17]
[main] Setsockopt(1 b 80d1000 4) on fd 297 [4:2:87]
[main] Setsockopt(1 8 80d1000 8f) on fd 298 [5:3:190]
[main] Setsockopt(1 22 80d1000 4) on fd 299 [8:2:67]
[main] Setsockopt(0 13 80d1000 4) on fd 300 [10:1:0]
[main] Setsockopt(10d d 80d1000 4) on fd 301 [12:1:218]
[main] Setsockopt(1 c 80d1000 67) on fd 302 [17:10:768]
[main] Setsockopt(1 1 80d1000 4) on fd 303 [20:5:23]
[main] Setsockopt(1 2f 80d1000 4) on fd 304 [23:5:118]
[main] Setsockopt(6 f 0 4) on fd 305 [30:1:0]
[main] Setsockopt(1 f 80d1000 1a) on fd 306 [39:1:1]
[main] Setsockopt(6 a 80d1000 4) on fd 308 [2:1:6]
[main] Setsockopt(1 2f 80d1000 92) on fd 309 [3:5:206]
[main] Setsockopt(1 2d 80d1000 9) on fd 311 [5:2:0]
[main] Setsockopt(1 21 80d1000 4) on fd 312 [8:4:111]
[main] Setsockopt(11 1 80d1000 4) on fd 313 [10:2:17]
[main] Setsockopt(105 c 80d1000 4) on fd 314 [12:1:19]
[main] Setsockopt(1 5 80d1000 2d) on fd 317 [30:2:0]
[main] Setsockopt(1 1 80d1000 4) on fd 319 [1:1:1]
[main] Setsockopt(1 2e 80d1000 4) on fd 320 [2:1:6]
[main] Setsockopt(101 8 80d1000 4) on fd 321 [3:3:6]
[main] Setsockopt(1 1 80d1000 ac) on fd 322 [4:2:13]
[main] Setsockopt(1 2 80d1000 4) on fd 323 [5:3:196]
[main] Setsockopt(29 18 80d1000 d5) on fd 325 [10:3:118]
[main] Setsockopt(1 23 80d1000 55) on fd 326 [12:5:2]
[main] Setsockopt(1 d 80d1000 8) on fd 327 [17:3:768]
[main] Setsockopt(1 a 80d1000 83) on fd 328 [20:3:51]
[main] Setsockopt(1 f 80d1000 b2) on fd 329 [23:2:0]
[main] Setsockopt(1 d 80d1000 8) on fd 331 [39:5:0]
[main] Setsockopt(1 d 80d1000 8) on fd 332 [1:2:1]
[main] Setsockopt(1 7 80d1000 4) on fd 333 [2:1:0]
[main] Setsockopt(101 8 80d1000 1c) on fd 334 [3:5:195]
[main] Setsockopt(1 1 80d1000 4) on fd 335 [4:2:175]
[main] Setsockopt(1 2e 80d1000 b3) on fd 337 [8:3:146]
[main] Setsockopt(1 b 80d1000 dd) on fd 338 [10:3:247]
[main] Setsockopt(1 2d 80d1000 4) on fd 340 [16:3:0]
[main] Setsockopt(1 7 80d1000 32) on fd 342 [20:5:65]
[main] Setsockopt(6 10 0 4) on fd 343 [30:1:0]
[main] Setsockopt(0 13 80d1000 4) on fd 346 [2:1:0]
[main] Setsockopt(100 1 80d1000 4) on fd 348 [4:2:95]
[main] Setsockopt(1 22 80d1000 6c) on fd 349 [5:3:7]
[main] Setsockopt(1 2e 80d1000 be) on fd 351 [12:5:2]
[main] Setsockopt(108 42000004 80d1000 4) on fd 353 [20:10:192]
[main] Setsockopt(1 2e 80d1000 e) on fd 354 [23:5:70]
[ 70.833924] irttp_open_tsap(), invalid tsap!
[ 70.834120] irda_open_tsap(), Unable to allocate TSAP!
[ 70.836077] irias_delete_object(), object already removed!
[main] Setsockopt(6 7 80d1000 4e) on fd 355 [30:1:0]
[main] Setsockopt(1 d 80d1000 8) on fd 356 [39:2:1]
[main] Setsockopt(1 5 80d1000 4) on fd 357 [1:5:1]
[main] Setsockopt(88 1 80d1000 4d) on fd 358 [2:2:0]
[main] Setsockopt(101 7 80d1000 f3) on fd 359 [3:2:0]
[main] Setsockopt(100 1 80d1000 4) on fd 360 [4:2:244]
[main] Setsockopt(1 23 80d1000 7) on fd 361 [5:3:61]
[main] Setsockopt(29 3 80d1000 f3) on fd 363 [10:2:0]
[main] Setsockopt(1 2 80d1000 4) on fd 365 [17:3:768]
[main] Setsockopt(1 1d 80d1000 4) on fd 366 [23:5:136]
[main] Setsockopt(0 14 80d1000 4) on fd 370 [2:3:243]
[main] Setsockopt(100 1 80d1000 4) on fd 372 [4:2:126]
[main] Setsockopt(1 2f 80d1000 4) on fd 373 [5:3:186]
[main] Setsockopt(1 c 80d1000 4) on fd 374 [10:3:159]
[main] Setsockopt(10e 4 80d1000 4) on fd 376 [16:3:4]
[main] Setsockopt(1 7 80d1000 f8) on fd 378 [23:5:206]
[main] Setsockopt(1 b 80d1000 4) on fd 379 [30:2:0]
[main] created 375 sockets
[main] Setsockopt(1 2e 80d1000 4) on fd 7 [2:3:38]
[main] Setsockopt(101 a 80d1000 c6) on fd 8 [3:2:0]
[main] Setsockopt(100 1 80d1000 4) on fd 9 [4:2:82]
[main] Setsockopt(1 5 80d1000 4) on fd 10 [5:2:0]
[main] Setsockopt(29 4 80d1000 4) on fd 12 [10:3:46]
[main] Setsockopt(1 6 80d1000 8d) on fd 13 [12:5:2]
[main] Setsockopt(1 28 80d1000 4) on fd 14 [16:3:0]
[main] Setsockopt(1 6 80d1000 2e) on fd 18 [30:5:0]
[main] Setsockopt(1 1d 80d1000 28) on fd 19 [39:5:0]
[main] Setsockopt(11 1 80d1000 4) on fd 21 [2:2:17]
[main] Setsockopt(101 c 80d1000 46) on fd 22 [3:5:202]
[main] Setsockopt(1 29 80d1000 4) on fd 23 [4:2:186]
[main] Setsockopt(88 1 80d1000 4) on fd 26 [10:2:0]
[main] Setsockopt(0 c 80d1000 4) on fd 27 [12:1:177]
[main] Setsockopt(1 b 80d1000 4) on fd 28 [17:2:768]
[main] Setsockopt(1 b 80d1000 42) on fd 29 [23:1:125]
[main] Setsockopt(1 23 80d1000 4) on fd 30 [30:2:0]
[main] Setsockopt(1 23 80d1000 f5) on fd 31 [39:5:0]
[main] Setsockopt(1 8 80d1000 4) on fd 32 [1:2:1]
[main] Setsockopt(1 24 80d1000 8d) on fd 33 [2:1:6]
[main] Setsockopt(100 1 80d1000 4) on fd 35 [4:2:48]
[main] Setsockopt(6 3 80d1000 4c) on fd 37 [10:1:0]
[main] Setsockopt(1 2 80d1000 69) on fd 38 [12:1:2]
[main] Setsockopt(10e 3 80d1000 37) on fd 39 [16:3:10]
[main] Setsockopt(1 e 80d1000 4) on fd 42 [23:1:173]
[ 71.732163] irttp_open_tsap(), invalid tsap!
[ 71.732933] irda_open_tsap(), Unable to allocate TSAP!
[ 71.733125] irias_delete_object(), object already removed!
[main] Setsockopt(6 1 0 4) on fd 43 [30:1:0]
[main] Setsockopt(1 2e 80d1000 d) on fd 44 [39:2:1]
[main] Setsockopt(1 10 80d1000 4) on fd 45 [1:5:1]
[main] Setsockopt(0 3 80d1000 bf) on fd 46 [2:3:51]
[main] Setsockopt(101 a 80d1000 4) on fd 47 [3:2:0]
[main] Setsockopt(1 1 80d1000 78) on fd 48 [4:2:228]
[main] Setsockopt(1 28 80d1000 4) on fd 49 [5:2:0]
[main] Setsockopt(1 10 80d1000 4) on fd 50 [8:2:132]
[main] Setsockopt(1 6 80d1000 4) on fd 51 [10:1:0]
[main] Setsockopt(641fa9bb d 80d1000 4) on fd 52 [12:5:2]
[main] Setsockopt(10e 4 80d1000 28) on fd 53 [16:2:2]
[main] Setsockopt(1 1 80d1000 80) on fd 54 [17:10:32821]
[main] Setsockopt(1 a 80d1000 4) on fd 55 [20:10:11]
[main] Setsockopt(10a 4 80d1000 3c) on fd 56 [23:5:17]
[main] Setsockopt(1 12 80d1000 f5) on fd 57 [30:2:0]
[main] Setsockopt(1 2a 80d1000 30) on fd 59 [1:5:1]
[main] Setsockopt(1 1 80d1000 a9) on fd 60 [2:3:248]
[main] Setsockopt(1 2b 80d1000 cd) on fd 61 [3:2:0]
[main] Setsockopt(1 c 80d1000 67) on fd 62 [4:2:124]
[main] Setsockopt(1 8 80d1000 4) on fd 65 [10:3:65]
[main] Setsockopt(1 9 80d1000 75) on fd 66 [12:1:251]
[main] Setsockopt(1 28 80d1000 4) on fd 67 [16:2:10]
[main] Setsockopt(1 2d 80d1000 bd) on fd 68 [17:3:768]
[main] Setsockopt(1 7 80d1000 52) on fd 69 [20:4:175]
[main] Setsockopt(1 8 80d1000 69) on fd 70 [30:2:0]
[main] Setsockopt(1 10 80d1000 d8) on fd 71 [39:2:1]
[main] Setsockopt(1 8 80d1000 b8) on fd 72 [1:2:1]
[main] Setsockopt(1 b 80d1000 86) on fd 73 [2:3:156]
[main] Setsockopt(1 e 80d1000 88) on fd 74 [3:3:156]
[main] Setsockopt(1 b 80d1000 4) on fd 75 [4:2:137]
[main] Setsockopt(1 29 80d1000 4) on fd 76 [5:3:216]
[main] Setsockopt(1 5 80d1000 4) on fd 77 [8:3:180]
[main] Setsockopt(29 4 80d1000 48) on fd 78 [10:1:0]
[main] Setsockopt(1 2c 80d1000 cc) on fd 79 [12:1:247]
[main] Setsockopt(1 5 80d1000 f5) on fd 81 [20:5:49]
[main] Setsockopt(1 c 80d1000 4) on fd 82 [23:1:148]
[main] Setsockopt(1 a 80d1000 b2) on fd 85 [1:1:1]
[main] Setsockopt(1 b 80d1000 4) on fd 87 [3:3:17]
[main] Setsockopt(1 29 80d1000 44) on fd 90 [8:4:21]
[main] Setsockopt(0 f 80d1000 1) on fd 91 [10:2:0]
[main] Setsockopt(101 c 80d1000 4) on fd 92 [12:5:2]
[main] Setsockopt(1 d 80d1000 8) on fd 95 [23:1:148]
[main] Setsockopt(1 21 80d1000 41) on fd 97 [39:2:1]
[main] Setsockopt(1 23 80d1000 a5) on fd 98 [1:2:1]
[main] Setsockopt(1 29 80d1000 a5) on fd 100 [3:3:95]
[main] Setsockopt(1 2b 80d1000 45) on fd 102 [5:2:0]
[main] Setsockopt(6 1 80d1000 35) on fd 103 [10:1:0]
[main] Setsockopt(0 d 80d1000 4) on fd 104 [12:1:54]
[main] Setsockopt(10e 3 80d1000 1f) on fd 105 [16:3:4]
[main] Setsockopt(107 f 80d1000 37) on fd 106 [17:3:768]
[main] Setsockopt(1 7 80d1000 26) on fd 112 [3:3:6]
[main] Setsockopt(1 2 80d1000 4) on fd 115 [8:3:222]
[main] Setsockopt(29 b 0 aa) on fd 116 [10:2:0]
[main] Setsockopt(107 c 80d1000 4) on fd 117 [12:1:14]
[main] Setsockopt(1 1 80d1000 4) on fd 120 [23:2:0]
[ 73.153228] irttp_open_tsap(), invalid tsap!
[ 73.155186] irda_open_tsap(), Unable to allocate TSAP!
[ 73.157039] irias_delete_object(), object already removed!
[main] Setsockopt(1 8 80d1000 4) on fd 121 [30:2:0]
[main] Setsockopt(11 1 80d1000 56) on fd 124 [2:2:0]
[main] Setsockopt(101 9 80d1000 4b) on fd 125 [3:5:206]
[main] Setsockopt(1 c 80d1000 4) on fd 126 [4:2:7]
[main] Setsockopt(1 29 80d1000 ab) on fd 128 [10:3:15]
[main] Setsockopt(1 21 80d1000 4) on fd 129 [12:5:2]
[main] Setsockopt(1 2c 80d1000 d2) on fd 130 [16:3:2]
[main] Setsockopt(1 2f 80d1000 29) on fd 131 [17:2:768]
[main] Setsockopt(1 23 80d1000 4) on fd 133 [23:1:220]
[main] Setsockopt(6 e 0 4) on fd 134 [30:1:0]
[main] Setsockopt(1 8 80d1000 4) on fd 141 [8:5:128]
[main] Setsockopt(1 2f 80d1000 4) on fd 142 [10:2:0]
[main] Setsockopt(1 e 80d1000 67) on fd 143 [12:1:77]
[main] Setsockopt(1 f 80d1000 4) on fd 146 [23:1:59]
[main] Setsockopt(6 7 80d1000 0) on fd 147 [30:1:0]
[main] Setsockopt(0 7 80d1000 4) on fd 150 [2:3:252]
[main] Setsockopt(1 2b 80d1000 4) on fd 152 [4:2:153]
[main] Setsockopt(1 d 80d1000 8) on fd 154 [8:10:216]
[main] Setsockopt(11 1 80d1000 4) on fd 155 [10:2:17]
[main] Setsockopt(1 10 80d1000 39) on fd 156 [12:1:162]
[main] Setsockopt(1 c 80d1000 4) on fd 157 [16:2:2]
[main] Setsockopt(1 2c 80d1000 7e) on fd 158 [17:2:768]
[main] Setsockopt(1 1d 80d1000 4) on fd 159 [20:2:247]
[ 74.133191] irda_setsockopt: not allowed to set MAXSDUSIZE for this socket type!
[main] Setsockopt(10a a 80d1000 4) on fd 160 [23:5:123]
[main] Setsockopt(1 10 80d1000 a4) on fd 161 [30:1:0]
[main] Setsockopt(1 8 80d1000 4) on fd 164 [2:3:119]
[main] Setsockopt(1 12 80d1000 c0) on fd 166 [4:2:81]
[main] Setsockopt(1 d 80d1000 8) on fd 167 [5:2:0]
[main] Setsockopt(108 42000004 80d1000 4) on fd 168 [8:4:221]
[main] Setsockopt(1 2b 80d1000 a0) on fd 169 [10:3:122]
[main] Setsockopt(1 d 80d1000 8) on fd 172 [20:4:181]
[main] Setsockopt(6 1 0 4) on fd 174 [30:1:0]
[main] Setsockopt(1 2 80d1000 4) on fd 175 [39:1:1]
[main] Setsockopt(1 9 80d1000 b8) on fd 176 [1:1:1]
[main] Setsockopt(6 a 80d1000 4) on fd 177 [2:1:6]
[main] Setsockopt(101 5 80d1000 4) on fd 178 [3:3:6]
[main] Generating file descriptors
[main] Setsockopt(100 1 80d1000 4) on fd 179 [4:2:242]
[main] Setsockopt(1 9 80d1000 4) on fd 181 [8:2:60]
[main] Setsockopt(1 20 80d1000 4) on fd 182 [10:3:230]
[main] Setsockopt(1 2 80d1000 4) on fd 183 [12:5:2]
[main] Setsockopt(1 1 80d1000 4) on fd 184 [16:2:6]
[main] Setsockopt(1 24 80d1000 2e) on fd 185 [17:2:768]
[main] Added 50 filenames from /dev
[main] Added 1 filenames from /proc
[main] Added 1 filenames from /sys
[main] Setsockopt(1 22 80d1000 4) on fd 186 [20:10:188]
[main] Setsockopt(1 d 80d1000 8) on fd 187 [23:2:0]
[ 74.589962] irttp_open_tsap(), invalid tsap!
[ 74.590880] irda_open_tsap(), Unable to allocate TSAP!
[ 74.591172] irias_delete_object(), object already removed!
[main] Setsockopt(6 13 80d1000 d) on fd 188 [30:1:0]
[main] Setsockopt(1 1 80d1000 4) on fd 189 [39:5:0]
[main] Setsockopt(1 c 80d1000 be) on fd 190 [1:2:1]
[main] Setsockopt(1 e 80d1000 4) on fd 191 [2:1:6]
[main] Setsockopt(101 8 80d1000 4) on fd 192 [3:3:6]
[main] Setsockopt(1 c 80d1000 ac) on fd 193 [4:2:87]
[main] Setsockopt(1 2b 80d1000 4) on fd 194 [5:2:0]
[main] Setsockopt(1 28 80d1000 ac) on fd 195 [8:2:216]
[main] Setsockopt(1 1 80d1000 4) on fd 196 [10:2:0]
[main] Setsockopt(88 b 80d1000 4) on fd 197 [12:5:2]
[main] Setsockopt(1 6 80d1000 4) on fd 198 [17:10:24582]
[main] Setsockopt(1 2e 80d1000 4) on fd 199 [20:10:242]
[main] Setsockopt(1 a 80d1000 4) on fd 200 [23:5:72]
[ 74.775868] irttp_open_tsap(), invalid tsap!
[ 74.776184] irda_open_tsap(), Unable to allocate TSAP!
[ 74.778914] irias_delete_object(), object already removed!
[main] Setsockopt(1 1 80d1000 84) on fd 201 [30:5:0]
[main] Setsockopt(1 21 80d1000 4) on fd 202 [39:5:0]
[main] Setsockopt(1 8 80d1000 34) on fd 203 [1:2:1]
[main] Setsockopt(1 2b 80d1000 db) on fd 204 [2:1:0]
[main] Setsockopt(1 5 80d1000 9e) on fd 205 [3:2:0]
[main] Setsockopt(1 5 80d1000 4) on fd 208 [8:5:31]
[main] Setsockopt(1 28 80d1000 b) on fd 209 [10:1:0]
[main] Setsockopt(105 d 80d1000 4) on fd 210 [12:5:2]
[main] Setsockopt(1 10 80d1000 4) on fd 211 [17:2:768]
[main] Setsockopt(108 42000004 80d1000 4) on fd 212 [20:4:116]
[main] Setsockopt(1 5 80d1000 4) on fd 213 [23:5:203]
[main] Setsockopt(1 21 80d1000 15) on fd 214 [30:5:0]
[main] Setsockopt(1 2b 80d1000 4) on fd 215 [39:5:0]
[main] Setsockopt(1 28 80d1000 99) on fd 216 [1:1:1]
[main] Setsockopt(1 2 80d1000 4) on fd 217 [2:3:160]
[main] Setsockopt(1 23 80d1000 4) on fd 218 [3:3:160]
[ 75.182026] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[main] Setsockopt(100 1 80d1000 4) on fd 219 [4:2:141]
[main] Setsockopt(1 a 80d1000 77) on fd 220 [5:3:168]
[main] Setsockopt(1 f 80d1000 8) on fd 222 [10:1:0]
[main] Setsockopt(1 b 80d1000 3e) on fd 223 [12:1:178]
[main] Setsockopt(10e 3 80d1000 4) on fd 224 [16:3:10]
[main] Setsockopt(107 7 80d1000 4) on fd 225 [17:2:768]
[main] Setsockopt(1 8 80d1000 bf) on fd 226 [20:5:38]
[main] Setsockopt(6 16 0 4) on fd 228 [30:1:0]
[main] Setsockopt(1 9 80d1000 c4) on fd 229 [39:5:0]
[main] Setsockopt(11 1 80d1000 13) on fd 231 [2:2:0]
[child0:211] signalfd (321) returned ENOSYS, marking as inactive.
[main] Setsockopt(1 6 80d1000 30) on fd 232 [3:2:0]
[main] Setsockopt(100 1 80d1000 4) on fd 233 [4:2:16]
[child0:211] delete_module (129) returned ENOSYS, marking as inactive.
[watchdog] Watchdog is alive. (pid:207)
[main] Setsockopt(88 1 80d1000 4) on fd 236 [10:2:0]
[main] Setsockopt(10d d 80d1000 4) on fd 237 [12:5:2]
[child0:211] timerfd_settime (325) returned ENOSYS, marking as inactive.
[main] Setsockopt(107 9 80d1000 4) on fd 238 [17:2:768]
[main] Setsockopt(1 b 80d1000 c) on fd 239 [20:2:94]
[child0:211] bdflush (134) returned ENOSYS, marking as inactive.
[ 75.582218] irda_setsockopt: not allowed to set MAXSDUSIZE for this socket type!
[ 75.589182] irttp_open_tsap: unable to allocate LSAP!!
[ 75.591628] irda_open_tsap(), Unable to allocate TSAP!
[ 75.595702] irias_delete_object(), object already removed!
[main] Setsockopt(1 2f 80d1000 70) on fd 241 [30:5:0]
[main] Setsockopt(1 f 80d1000 86) on fd 242 [39:1:1]
[main] Setsockopt(1 2d 80d1000 4) on fd 244 [2:2:17]
[main] Setsockopt(101 4 80d1000 dc) on fd 245 [3:5:206]
[main] Setsockopt(1 28 80d1000 4b) on fd 246 [4:2:207]
[child0:211] finit_module (350) returned ENOSYS, marking as inactive.
[main] Setsockopt(1 8 80d1000 36) on fd 247 [5:3:12]
[main] Setsockopt(1 6 80d1000 4) on fd 248 [8:5:183]
[main] Setsockopt(11 1 80d1000 4) on fd 249 [10:2:17]
[main] Setsockopt(1 d 80d1000 8) on fd 250 [12:1:194]
[main] Setsockopt(107 9 80d1000 49) on fd 251 [17:2:768]
[ 75.744042] irttp_open_tsap(), invalid tsap!
[ 75.744388] irda_open_tsap(), Unable to allocate TSAP!
[ 75.744571] irias_delete_object(), object already removed!
[main] Setsockopt(1 a 80d1000 6b) on fd 254 [39:1:1]
[main] Setsockopt(1 28 80d1000 22) on fd 255 [1:5:1]
[main] Setsockopt(0 1 80d1000 57) on fd 256 [2:3:60]
[main] Setsockopt(1 21 80d1000 51) on fd 257 [3:3:60]
[main] Setsockopt(100 1 80d1000 4) on fd 258 [4:2:175]
[main] Setsockopt(108 42000004 80d1000 4) on fd 260 [8:2:199]
[main] Setsockopt(1 29 80d1000 4) on fd 261 [10:2:17]
[main] Setsockopt(10d d 80d1000 4) on fd 262 [12:5:2]
[main] Setsockopt(1 c 80d1000 4) on fd 263 [16:3:0]
[main] Setsockopt(1 6 80d1000 2e) on fd 264 [17:3:768]
[main] Setsockopt(6 f 0 4) on fd 266 [30:1:0]
[main] Setsockopt(1 2 80d1000 4) on fd 269 [2:3:196]
[main] Setsockopt(1 5 80d1000 aa) on fd 270 [3:3:196]
[main] Setsockopt(100 1 80d1000 4) on fd 271 [4:2:184]
[main] Setsockopt(1 21 80d1000 4) on fd 272 [5:2:0]
[main] Setsockopt(88 b 80d1000 4) on fd 275 [12:1:224]
[main] Setsockopt(1 8 80d1000 4) on fd 278 [23:1:42]
[main] Setsockopt(1 2f 80d1000 4) on fd 279 [30:2:0]
[main] Setsockopt(1 29 80d1000 4) on fd 281 [1:2:1]
[main] Setsockopt(6 5 80d1000 58) on fd 282 [2:1:6]
[main] Setsockopt(1 21 80d1000 1c) on fd 283 [3:3:6]
[main] Setsockopt(1 2d 80d1000 4) on fd 285 [5:2:0]
[main] Setsockopt(29 4 80d1000 4) on fd 287 [10:2:17]
[main] Setsockopt(1 d 80d1000 8) on fd 288 [12:1:85]
[main] Setsockopt(10a a 80d1000 16) on fd 291 [23:1:84]
[ 76.089190] irttp_open_tsap(), invalid tsap!
[ 76.089938] irda_open_tsap(), Unable to allocate TSAP!
[ 76.090133] irias_delete_object(), object already removed!
[main] Setsockopt(6 b 0 32) on fd 292 [30:1:0]
[main] Setsockopt(1 12 80d1000 7c) on fd 294 [1:5:1]
[main] Setsockopt(1 2f 80d1000 4) on fd 295 [2:2:17]
[main] Setsockopt(101 7 80d1000 4) on fd 296 [3:5:240]
[main] Setsockopt(1 10 80d1000 f9) on fd 297 [4:2:87]
[main] Setsockopt(1 6 80d1000 4) on fd 299 [8:2:67]
[main] Setsockopt(1 2f 80d1000 d3) on fd 300 [10:1:0]
[main] Setsockopt(1 a 80d1000 4) on fd 301 [12:1:218]
[main] Setsockopt(1 1 80d1000 4) on fd 304 [23:5:118]
[main] Setsockopt(1 1d 80d1000 ec) on fd 305 [30:1:0]
[main] Setsockopt(6 1 80d1000 75) on fd 308 [2:1:6]
[main] Setsockopt(101 5 80d1000 4) on fd 309 [3:5:206]
[main] Setsockopt(100 1 80d1000 4) on fd 310 [4:2:53]
[main] Setsockopt(1 24 80d1000 41) on fd 312 [8:4:111]
[main] Setsockopt(0 12 80d1000 4) on fd 313 [10:2:17]
[main] Setsockopt(1 2d 80d1000 1b) on fd 314 [12:1:19]
[main] Setsockopt(1 29 80d1000 42) on fd 315 [17:2:768]
[main] Setsockopt(1 b 80d1000 3d) on fd 316 [23:5:74]
[ 76.321851] irttp_open_tsap(), invalid tsap!
[ 76.322042] irda_open_tsap(), Unable to allocate TSAP!
[ 76.322221] irias_delete_object(), object already removed!
[main] Setsockopt(1 29 80d1000 4) on fd 318 [39:5:0]
[main] Setsockopt(1 a 80d1000 6b) on fd 320 [2:1:6]
[main] Setsockopt(101 5 80d1000 26) on fd 321 [3:3:6]
[main] Setsockopt(1 8 80d1000 c2) on fd 323 [5:3:196]
[main] Setsockopt(1 1d 80d1000 a4) on fd 324 [8:3:130]
[main] Setsockopt(1 23 80d1000 e) on fd 325 [10:3:118]
[main] Setsockopt(88 b 80d1000 4) on fd 326 [12:5:2]
[main] Setsockopt(1 f 80d1000 b) on fd 327 [17:3:768]
[main] Setsockopt(1 20 80d1000 d7) on fd 328 [20:3:51]
[ 76.472914] irttp_open_tsap(), invalid tsap!
[ 76.473138] irda_open_tsap(), Unable to allocate TSAP!
[ 76.473459] irias_delete_object(), object already removed!
[main] Setsockopt(1 22 80d1000 38) on fd 332 [1:2:1]
[main] Setsockopt(1 e 80d1000 65) on fd 333 [2:1:0]
[main] Setsockopt(100 1 80d1000 4) on fd 335 [4:2:175]
[main] Setsockopt(1 6 80d1000 4) on fd 336 [5:3:250]
[main] Setsockopt(1 8 80d1000 4) on fd 338 [10:3:247]
[main] Setsockopt(1 10 80d1000 c6) on fd 339 [12:1:184]
[main] Setsockopt(1 5 80d1000 63) on fd 340 [16:3:0]
[main] Setsockopt(1 2 80d1000 e4) on fd 342 [20:5:65]
[main] Setsockopt(1 2 80d1000 4) on fd 343 [30:1:0]
[main] Setsockopt(1 29 80d1000 28) on fd 344 [39:5:0]
[main] Setsockopt(1 1d 80d1000 bd) on fd 345 [1:5:1]
[main] Setsockopt(6 1 80d1000 4) on fd 346 [2:1:0]
[main] Setsockopt(1 e 80d1000 4) on fd 347 [3:3:0]
[main] Setsockopt(1 a 80d1000 4) on fd 348 [4:2:95]
[main] Setsockopt(1 2c 80d1000 4) on fd 350 [10:1:0]
[main] Setsockopt(1 10 80d1000 4) on fd 352 [17:2:768]
[main] Setsockopt(1 d 80d1000 8) on fd 353 [20:10:192]
[child0:211] set_mempolicy (276) returned ENOSYS, marking as inactive.
[main] Setsockopt(6 5 0 70) on fd 355 [30:1:0]
[main] Setsockopt(1 6 80d1000 4) on fd 357 [1:5:1]
[main] Setsockopt(11 1 80d1000 ac) on fd 358 [2:2:0]
[main] Setsockopt(1 24 80d1000 4) on fd 359 [3:2:0]
[main] Setsockopt(100 1 80d1000 4) on fd 360 [4:2:244]
[main] Setsockopt(1 23 80d1000 d5) on fd 361 [5:3:61]
[child0:211] mq_notify (281) returned ENOSYS, marking as inactive.
[main] Setsockopt(1 7 80d1000 99) on fd 362 [8:3:240]
[main] Setsockopt(88 1 80d1000 38) on fd 363 [10:2:0]
[main] Setsockopt(113 b 80d1000 4) on fd 364 [12:5:2]
[main] Setsockopt(1 10 80d1000 4) on fd 365 [17:3:768]
[ 76.858995] irttp_open_tsap(), invalid tsap!
[ 76.859169] irda_open_tsap(), Unable to allocate TSAP!
[ 76.861491] irias_delete_object(), object already removed!
[main] Setsockopt(1 2f 80d1000 98) on fd 366 [23:5:136]
[main] Setsockopt(1 22 80d1000 4) on fd 369 [1:1:1]
[main] Setsockopt(1 22 80d1000 4e) on fd 370 [2:3:243]
[main] Setsockopt(1 28 80d1000 4) on fd 371 [3:2:0]
[main] Setsockopt(100 1 80d1000 4) on fd 372 [4:2:126]
[main] Setsockopt(29 17 0 52) on fd 374 [10:3:159]
[main] Setsockopt(105 b 80d1000 4) on fd 375 [12:5:2]
[main] Setsockopt(10e 3 80d1000 4) on fd 376 [16:3:4]
[main] Setsockopt(1 c 80d1000 4) on fd 377 [17:3:768]
[ 76.943120] irttp_open_tsap(), invalid tsap!
[main] Setsockopt(1 2b 80d1000 4) on fd 378 [23:5:206]
[ 76.948606] irda_open_tsap(), Unable to allocate TSAP!
[ 76.949573] irias_delete_object(), object already removed!
[main] Setsockopt(1 6 80d1000 2a) on fd 379 [30:2:0]
[main] 375 sockets created based on info from socket cachefile.
[child0:211] process_vm_writev (348) returned ENOSYS, marking as inactive.
[child0:211] io_getevents (247) returned ENOSYS, marking as inactive.
[child0:211] lookup_dcookie (253) returned ENOSYS, marking as inactive.
[child0:211] process_vm_readv (347) returned ENOSYS, marking as inactive.
[child0:211] move_pages (317) returned ENOSYS, marking as inactive.
*** glibc detected *** /trinity: free(): invalid pointer: 0x08666000 ***
[main] Random reseed: 891785912
[child0:212] uid changed! Was: 0, now 6051057
Bailing main loop. Exit reason: UID changed.
[main] Generating file descriptors
[main] Added 47 filenames from /dev
[main] Added 1 filenames from /proc
[main] Added 1 filenames from /sys
[child0:213] kexec_load (283) returned ENOSYS, marking as inactive.
[child0:213] timerfd_gettime (326) returned ENOSYS, marking as inactive.
[child0:213] mq_open (277) returned ENOSYS, marking as inactive.
[child0:213] uid changed! Was: 0, now 229
Bailing main loop. Exit reason: UID changed.
[watchdog] [209] Watchdog exiting
[init]
Ran 16 syscalls. Successes: 4 Failures: 12
[watchdog] [207] Watchdog exiting
[init]
Ran 100 syscalls. Successes: 31 Failures: 68
[ 100.781324] spin_lock-torture: Writes: Total: 4 Max/Min: 0/0 Fail: 0
lsmod: can't open '/proc/modules': No such file or directory
BusyBox v1.19.4 (2012-04-22 09:22:10 PDT) multi-call binary.
Usage: rmmod [-wfa] [MODULE]...
lsmod: can't open '/proc/modules': No such file or directory
BusyBox v1.19.4 (2012-04-22 09:22:10 PDT) multi-call binary.
Usage: rmmod [-wfa] [MODULE]...
lsmod: can't open '/proc/modules': No such file or directory
BusyBox v1.19.4 (2012-04-22 09:22:10 PDT) multi-call binary.
Usage: rmmod [-wfa] [MODULE]...
run-parts: /etc/kernel-tests/99-rmmod exited with code 123
shutdown: warning: cannot open /var/run/shutdown.pid
mount: no /proc/mounts
wfg: skip syslogd
sed: /proc/mounts: No such file or directory
sed: /proc/mounts: No such file or directory
sed: /proc/mounts: No such file or directory
Deconfiguring network interfaces... ifdown: interface lo not configured
done.
Sending all processes the TERM signal...
mount: mounting proc on /proc failed: No such device
killall5[245]: mount returned non-zero exit status
killall5[245]: /proc not mounted, failed to mount.
Sending all processes the KILL signal...
mount: mounting proc on /proc failed: No such device
killall5[248]: mount returned non-zero exit status
killall5[248]: /proc not mounted, failed to mount.
Unmounting remote filesystems...
Deactivating swap...
Unmounting local filesystems...
grep: /proc/mounts: No such file or directory
mount: can't read '/proc/mounts': No such file or directory
Rebooting...
[ 130.836575] spin_lock-torture: Unscheduled system shutdown detected
[ 130.841573] torture thread torture_shuffle parking due to system shutdown
[ 130.863209] reboot: Restarting system
[ 130.864054] reboot: machine restart
Elapsed time: 140
qemu-system-x86_64 -cpu qemu64,+smep,+smap -kernel /kernel/i386-randconfig-x4-02212316/faa2e6fb0a98c9caa8995acf3222db9f7f029395/vmlinuz-3.14.0-rc3-next-20140221-04488-gfaa2e6f -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-x4-02212316/next:master/.vmlinuz-faa2e6fb0a98c9caa8995acf3222db9f7f029395-20140222001515-4-roam branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-x4-02212316/faa2e6fb0a98c9caa8995acf3222db9f7f029395/vmlinuz-3.14.0-rc3-next-20140221-04488-gfaa2e6f' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::36096-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/LABEL=KVM/disk0-yocto-roam-17,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk1-yocto-roam-17,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk2-yocto-roam-17,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk3-yocto-roam-17,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk4-yocto-roam-17,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk5-yocto-roam-17,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-yocto-roam-17 -serial file:/dev/shm/kboot/serial-yocto-roam-17 -daemonize -display none -monitor null
[-- Attachment #3: i386-randconfig-x4-02212316-faa2e6fb0a98c9caa8995acf3222db9f7f029395-WARNING:---at----init_amd+-x-79798.log --]
[-- Type: application/octet-stream, Size: 70716 bytes --]
[-- Attachment #4: config-3.14.0-rc3-next-20140221-04488-gfaa2e6f --]
[-- Type: text/plain, Size: 66786 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.14.0-rc3 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_NONE is not set
CONFIG_RCU_NOCB_CPU_ZERO=y
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set
CONFIG_X86_BIGSMP=y
CONFIG_GOLDFISH=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_GOLDFISH=y
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_X86_RDC321X=y
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_X86_32_IRIS=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_MICROCODE_EARLY=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VMSPLIT_2G=y
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_HIGHMEM=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_CLEANCACHE=y
# CONFIG_CMA is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_BASE_MAX_OFFSET=0x20000000
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_EXTLOG is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
# CONFIG_OLPC is not set
CONFIG_ALIX=y
# CONFIG_NET5501 is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
# CONFIG_IPV6_PIMSM_V2 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
CONFIG_RDS=y
# CONFIG_RDS_TCP is not set
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
# CONFIG_ATM_BR2684 is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_LTPC=y
# CONFIG_COPS is not set
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_NAT=y
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BLA=y
# CONFIG_BATMAN_ADV_DAT is not set
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
CONFIG_SCC=y
CONFIG_SCC_DELAY=y
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
# CONFIG_BAYCOM_EPP is not set
CONFIG_YAM=y
# CONFIG_CAN is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=y
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=y
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
CONFIG_NFC_NCI=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_SIM=y
# CONFIG_NFC_PN544 is not set
# CONFIG_NFC_MICROREAD is not set
# CONFIG_NFC_MRVL is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_SRAM=y
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_GOLDFISH_TTY is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_TPM=y
# CONFIG_NVRAM is not set
CONFIG_DTLK=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
CONFIG_SCx200_GPIO=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_ST33_I2C=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_KEMPLD=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=y
CONFIG_SCx200_I2C=y
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
CONFIG_SPMI=y
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
CONFIG_NTP_PPS=y
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_SX150X=y
# CONFIG_GPIO_STMPE is not set
CONFIG_GPIO_TWL6040=y
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5520=y
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_INTEL_MID is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=y
#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_TPS6586X=y
#
# USB GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_MAX8997 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_MAX16065=y
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_HTU21=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=y
# CONFIG_ACPI_INT3403_THERMAL is not set
#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_F71808E_WDT=y
# CONFIG_SP5100_TCO is not set
CONFIG_SC520_WDT=y
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_KEMPLD_WDT=y
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
CONFIG_PC87413_WDT=y
# CONFIG_NV_TCO is not set
CONFIG_RDC321X_WDT=y
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
CONFIG_SBC7240_WDT=y
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=y
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
CONFIG_W83697HF_WDT=y
CONFIG_W83697UG_WDT=y
CONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
CONFIG_MEN_A21_WDT=y
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9063=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=y
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_RETU is not set
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
# CONFIG_PCF50633_GPIO is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AS3711=y
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_MAX14577 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65217 is not set
# CONFIG_REGULATOR_TPS6586X is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8994=y
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_HDMI=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
# CONFIG_FB_SM501 is not set
CONFIG_FB_GOLDFISH=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
CONFIG_FB_AUO_K1901=y
CONFIG_FB_SIMPLE=y
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_PCF50633 is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_TPS65217 is not set
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_SAMSUNG_USB2PHY is not set
# CONFIG_SAMSUNG_USB3PHY is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=y
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_MF624 is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_ECHO is not set
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_DX_SEP is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
#
# Analog to digital converters
#
CONFIG_AD7291=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD799X=y
CONFIG_AD799X_RING_BUFFER=y
#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7152=y
# CONFIG_AD7746 is not set
#
# Direct Digital Synthesis
#
#
# Digital gyroscope sensors
#
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
#
# Light sensors
#
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_TSL2583=y
CONFIG_TSL2x7x=y
#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set
#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
#
# Resolver to digital converters
#
#
# Triggers - standalone
#
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_FT1000=y
#
# Speakup console speech
#
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_DGRP is not set
CONFIG_GOLDFISH_AUDIO=y
# CONFIG_XILLYBUS is not set
# CONFIG_DGNC is not set
# CONFIG_DGAP is not set
CONFIG_GS_FPGABOOT=y
# CONFIG_X86_PLATFORM_DEVICES is not set
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y
#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX8997=y
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
#
# Analog to digital converters
#
CONFIG_MAX1363=y
CONFIG_MCP3422=y
# CONFIG_NAU7802 is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_AM335X_ADC=y
#
# Amplifiers
#
#
# Hid Sensor IIO Common
#
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
# CONFIG_AD5446 is not set
CONFIG_MAX517=y
CONFIG_MCP4725=y
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
#
# Digital gyroscope sensors
#
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=y
#
# Humidity sensors
#
# CONFIG_DHT11 is not set
CONFIG_SI7005=y
#
# Inertial measurement units
#
# CONFIG_INV_MPU6050_IIO is not set
#
# Light sensors
#
CONFIG_ADJD_S311=y
# CONFIG_APDS9300 is not set
# CONFIG_CM32181 is not set
CONFIG_CM36651=y
CONFIG_GP2AP020A00F=y
# CONFIG_LTR501 is not set
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
# CONFIG_TSL4531 is not set
CONFIG_VCNL4000=y
#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
CONFIG_MAG3110=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
#
# Inclinometer sensors
#
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
#
# Pressure sensors
#
CONFIG_MPL3115=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
#
# Temperature sensors
#
CONFIG_TMP006=y
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LP3943 is not set
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_PSTORE is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not set
CONFIG_CIFS_ACL=y
# CONFIG_CIFS_DEBUG is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SMB2 is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
CONFIG_9P_FS=y
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_TRUSTED_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_586=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_CRC64_ECMA=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
[-- Attachment #5: Type: text/plain, Size: 85 bytes --]
_______________________________________________
LKP mailing list
LKP@linux.intel.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 1:58 [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd() Fengguang Wu
@ 2014-03-07 5:03 ` H. Peter Anvin
2014-03-07 5:50 ` Fengguang Wu
0 siblings, 1 reply; 18+ messages in thread
From: H. Peter Anvin @ 2014-03-07 5:03 UTC (permalink / raw)
To: Fengguang Wu, Andreas Herrmann
Cc: Ingo Molnar, Borislav Petkov, Yinghai Lu, LKML
On 03/06/2014 05:58 PM, Fengguang Wu wrote:
> Hi all,
>
> I find the below WARNING shows up only in
>
> qemu-system-x86_64 -cpu qemu64,+smep,+smap
>
Yes, it is because Qemu doesn't show the AMD-specific SMP CPUID bit.
It's harmless in that sense.
Unfortunately these things are hard to fix in Qemu.
-hpa
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 5:03 ` H. Peter Anvin
@ 2014-03-07 5:50 ` Fengguang Wu
2014-03-07 18:56 ` H. Peter Anvin
0 siblings, 1 reply; 18+ messages in thread
From: Fengguang Wu @ 2014-03-07 5:50 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Andreas Herrmann, Ingo Molnar, Borislav Petkov, Yinghai Lu, LKML
On Thu, Mar 06, 2014 at 09:03:50PM -0800, H. Peter Anvin wrote:
> On 03/06/2014 05:58 PM, Fengguang Wu wrote:
> > Hi all,
> >
> > I find the below WARNING shows up only in
> >
> > qemu-system-x86_64 -cpu qemu64,+smep,+smap
> >
>
> Yes, it is because Qemu doesn't show the AMD-specific SMP CPUID bit.
> It's harmless in that sense.
>
> Unfortunately these things are hard to fix in Qemu.
OK. As an alternative, is it possible to pass one of the below CPUID flags in
the Qemu command line, so as to quiet the warning?
% qemu-system-x86_64 -cpu help
x86 qemu64 QEMU Virtual CPU version 1.6.1
x86 phenom AMD Phenom(tm) 9550 Quad-Core Processor
x86 core2duo Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz
x86 kvm64 Common KVM processor
x86 qemu32 QEMU Virtual CPU version 1.6.1
x86 kvm32 Common 32-bit KVM processor
x86 coreduo Genuine Intel(R) CPU T2600 @ 2.16GHz
x86 486
x86 pentium
x86 pentium2
x86 pentium3
x86 athlon QEMU Virtual CPU version 1.6.1
x86 n270 Intel(R) Atom(TM) CPU N270 @ 1.60GHz
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Westmere Westmere E56xx/L56xx/X56xx (Nehalem-C)
x86 SandyBridge Intel Xeon E312xx (Sandy Bridge)
x86 Haswell Intel Core Processor (Haswell)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G4 AMD Opteron 62xx class CPU
x86 Opteron_G5 AMD Opteron 63xx class CPU
x86 host KVM processor with all supported host features (only available in KVM mode)
Recognized CPUID flags:
pbe ia64 tm ht ss sse2 sse fxsr mmx acpi ds clflush pn pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de vme fpu
hypervisor rdrand f16c avx osxsave xsave aes tsc-deadline popcnt movbe x2apic sse4.2|sse4_2 sse4.1|sse4_1 dca pcid pdcm xtpr cx16 fma cid ssse3 tm2 est smx vmx ds_cpl monitor dtes64 pclmulqdq|pclmuldq pni|sse3
smap adx rdseed rtm invpcid erms bmi2 smep avx2 hle bmi1 fsgsbase
3dnow 3dnowext lm|i64 rdtscp pdpe1gb fxsr_opt|ffxsr mmxext nx|xd syscall
perfctr_nb perfctr_core topoext tbm nodeid_msr tce fma4 lwp wdt skinit xop ibs osvw 3dnowprefetch misalignsse sse4a abm cr8legacy extapic svm cmp_legacy lahf_lm
pmm-en pmm phe-en phe ace2-en ace2 xcrypt-en xcrypt xstore-en xstore
kvm_pv_eoi kvm_steal_time kvm_asyncpf kvmclock kvm_mmu kvm_nopiodelay kvmclock
pfthreshold pause_filter decodeassists flushbyasid vmcb_clean tsc_scale nrip_save svm_lock lbrv npt
Thanks,
Fengguang
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 5:50 ` Fengguang Wu
@ 2014-03-07 18:56 ` H. Peter Anvin
2014-03-07 19:10 ` Dave Jones
0 siblings, 1 reply; 18+ messages in thread
From: H. Peter Anvin @ 2014-03-07 18:56 UTC (permalink / raw)
To: Fengguang Wu
Cc: Andreas Herrmann, Ingo Molnar, Borislav Petkov, Yinghai Lu, LKML
On 03/06/2014 09:50 PM, Fengguang Wu wrote:
>>
>> Unfortunately these things are hard to fix in Qemu.
>
> OK. As an alternative, is it possible to pass one of the below CPUID flags in
> the Qemu command line, so as to quiet the warning?
>
I don't see the AMD SMP CPUID flag in there.
Boris, could you help? The problem is that "qemu -cpu
qemu64,+smep,+smap" identifies as an AMD CPU which triggers a
warning/taint because the SMP flag isn't set.
>
> Recognized CPUID flags:
> pbe ia64 tm ht ss sse2 sse fxsr mmx acpi ds clflush pn pse36 pat cmov mca pge mtrr sep apic cx8 mce pae msr tsc pse de vme fpu
> hypervisor rdrand f16c avx osxsave xsave aes tsc-deadline popcnt movbe x2apic sse4.2|sse4_2 sse4.1|sse4_1 dca pcid pdcm xtpr cx16 fma cid ssse3 tm2 est smx vmx ds_cpl monitor dtes64 pclmulqdq|pclmuldq pni|sse3
> smap adx rdseed rtm invpcid erms bmi2 smep avx2 hle bmi1 fsgsbase
> 3dnow 3dnowext lm|i64 rdtscp pdpe1gb fxsr_opt|ffxsr mmxext nx|xd syscall
> perfctr_nb perfctr_core topoext tbm nodeid_msr tce fma4 lwp wdt skinit xop ibs osvw 3dnowprefetch misalignsse sse4a abm cr8legacy extapic svm cmp_legacy lahf_lm
> pmm-en pmm phe-en phe ace2-en ace2 xcrypt-en xcrypt xstore-en xstore
> kvm_pv_eoi kvm_steal_time kvm_asyncpf kvmclock kvm_mmu kvm_nopiodelay kvmclock
> pfthreshold pause_filter decodeassists flushbyasid vmcb_clean tsc_scale nrip_save svm_lock lbrv npt
>
-hpa
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 18:56 ` H. Peter Anvin
@ 2014-03-07 19:10 ` Dave Jones
2014-03-07 21:01 ` H. Peter Anvin
0 siblings, 1 reply; 18+ messages in thread
From: Dave Jones @ 2014-03-07 19:10 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Fengguang Wu, Andreas Herrmann, Ingo Molnar, Borislav Petkov,
Yinghai Lu, LKML
On Fri, Mar 07, 2014 at 10:56:11AM -0800, H. Peter Anvin wrote:
> On 03/06/2014 09:50 PM, Fengguang Wu wrote:
> >>
> >> Unfortunately these things are hard to fix in Qemu.
> >
> > OK. As an alternative, is it possible to pass one of the below CPUID flags in
> > the Qemu command line, so as to quiet the warning?
> >
>
> I don't see the AMD SMP CPUID flag in there.
>
> Boris, could you help? The problem is that "qemu -cpu
> qemu64,+smep,+smap" identifies as an AMD CPU which triggers a
> warning/taint because the SMP flag isn't set.
qemu64 triggers this ? That spew comes from amd_k7_smp_check()
which should only run on family 6, which was all 32bit.
Dave
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 19:10 ` Dave Jones
@ 2014-03-07 21:01 ` H. Peter Anvin
2014-03-07 21:38 ` Borislav Petkov
0 siblings, 1 reply; 18+ messages in thread
From: H. Peter Anvin @ 2014-03-07 21:01 UTC (permalink / raw)
To: Dave Jones, Fengguang Wu, Andreas Herrmann, Ingo Molnar,
Borislav Petkov, Yinghai Lu, LKML
On 03/07/2014 11:10 AM, Dave Jones wrote:
> On Fri, Mar 07, 2014 at 10:56:11AM -0800, H. Peter Anvin wrote:
> > On 03/06/2014 09:50 PM, Fengguang Wu wrote:
> > >>
> > >> Unfortunately these things are hard to fix in Qemu.
> > >
> > > OK. As an alternative, is it possible to pass one of the below CPUID flags in
> > > the Qemu command line, so as to quiet the warning?
> > >
> >
> > I don't see the AMD SMP CPUID flag in there.
> >
> > Boris, could you help? The problem is that "qemu -cpu
> > qemu64,+smep,+smap" identifies as an AMD CPU which triggers a
> > warning/taint because the SMP flag isn't set.
>
> qemu64 triggers this ? That spew comes from amd_k7_smp_check()
> which should only run on family 6, which was all 32bit.
>
[ 0.152749] smpboot: CPU0: AMD QEMU Virtual CPU version 1.6.0 (fam:
06, model: 02, stepping: 03)
Seems they are using a really odd CPUID combination, then.
-hpa
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 21:01 ` H. Peter Anvin
@ 2014-03-07 21:38 ` Borislav Petkov
2014-03-07 22:06 ` Dave Jones
2014-03-09 18:07 ` Paolo Bonzini
0 siblings, 2 replies; 18+ messages in thread
From: Borislav Petkov @ 2014-03-07 21:38 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Dave Jones, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
+ Paolo.
(drop Andreas' old, invalid now email).
On Fri, Mar 07, 2014 at 01:01:22PM -0800, H. Peter Anvin wrote:
> > qemu64 triggers this ? That spew comes from amd_k7_smp_check()
> > which should only run on family 6, which was all 32bit.
>
> [ 0.152749] smpboot: CPU0: AMD QEMU Virtual CPU version 1.6.0 (fam:
> 06, model: 02, stepping: 03)
>
> Seems they are using a really odd CPUID combination, then.
qemu64 is (family, model, stepping) (6/6/3) and it runs into the
amd_k7_smp_check() when booting a 32-bit kernel:
[ 0.022004] smpboot: CPU0: AMD QEMU Virtual CPU version 1.7.50 (fam: 06, model: 06, stepping: 03)
[ 0.028000] APIC calibration not consistent with PM-Timer: 98ms instead of 100ms
[ 0.028000] APIC delta adjusted to PM-Timer: 6288351 (6193101)
[ 0.028160] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.031003] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
[ 0.033821] CPU 1 irqstacks, hard=80064000 soft=80066000
[ 0.034004] x86: Booting SMP configuration:
[ 0.035003] .... node #0, CPUs: #1
[ 0.003000] Initializing CPU#1
[ 0.004000] kvm-clock: cpu 1, msr 0:777fd041, secondary cpu clock
[ 0.004000] ------------[ cut here ]------------
[ 0.004000] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd+0x752/0x780()
[ 0.004000] WARNING: This combination of AMD processors is not suitable for SMP.
[ 0.004000] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc5-01789-g014abf290f3f #5
[ 0.004000] 00000000 00000000 80059ec0 95bc1c08 80059f00 80059ef0 9564571f 95d867cc
[ 0.004000] 80059f1c 00000000 95d823e0 000000dc 956125c2 956125c2 f540ef80 f540efd0
[ 0.004000] f540effc 80059f08 9564579e 00000009 80059f00 95d867cc 80059f1c 80059f44
[ 0.004000] Call Trace:
[ 0.004000] [<95bc1c08>] dump_stack+0x48/0x60
[ 0.004000] [<9564571f>] warn_slowpath_common+0x6f/0x90
[ 0.004000] [<956125c2>] ? init_amd+0x752/0x780
[ 0.004000] [<956125c2>] ? init_amd+0x752/0x780
[ 0.004000] [<9564579e>] warn_slowpath_fmt+0x2e/0x30
[ 0.004000] [<956125c2>] init_amd+0x752/0x780
[ 0.004000] [<95610497>] identify_cpu+0x117/0x4d0
[ 0.004000] [<9561085f>] identify_secondary_cpu+0xf/0x20
[ 0.004000] [<95628f9d>] smp_store_cpu_info+0x2d/0x40
[ 0.004000] [<9562965c>] start_secondary+0xec/0x270
[ 0.004000] ---[ end trace 3e723b7fa3855706 ]---
[ 0.004000] Disabling lock debugging due to kernel taint
So, even if we enable X86_FEATURE_MP in qemu for the "qemu64" model
(diff below), which is, or rather used to be CPUID_80000001[19] for K7,
qemu goes and asks the host which CPUID bits it supports and filters
those bits out from the requested features.
Now, on both modern AMDs and Intels, bit 19 in CPUID_80000001 is
reserved, which means 0, which means it gets filtered out.
So, long story short and unless I'm missing something else, there should
be a cmdline option for qemu which says:
--I-know-what-im-doing-enable-these-features +mp
which doesn't get filtered out.
* Another option would be if we change the f/m/s of "qemu64" so that
the test doesn't fire.
What also makes me wonder is why is this thing even called qemu64?? AMD
family 6 was 32-bit only CPUs so 64 is kinda wrong IMO. I mean, the
kernel code is in "ifdef CONFIG_X86_32" block so "qemu64" is patently
wrong naming.
Oh, and the thing has CPUID_EXT2_LM which is also a WTH moment for me.
Paolo, what's going on here?
Anyway, this is how it looks from here.
diff --git a/target-i386/cpu.c b/target-i386/cpu.c
index 0e8812a11d1e..981ce9ea992b 100644
--- a/target-i386/cpu.c
+++ b/target-i386/cpu.c
@@ -565,7 +565,8 @@ static x86_def_t builtin_x86_defs[] = {
CPUID_EXT_SSE3 | CPUID_EXT_CX16 | CPUID_EXT_POPCNT,
.features[FEAT_8000_0001_EDX] =
(PPRO_FEATURES & CPUID_EXT2_AMD_ALIASES) |
- CPUID_EXT2_LM | CPUID_EXT2_SYSCALL | CPUID_EXT2_NX,
+ CPUID_EXT2_LM | CPUID_EXT2_SYSCALL | CPUID_EXT2_NX |
+ CPUID_EXT2_MP,
.features[FEAT_8000_0001_ECX] =
CPUID_EXT3_LAHF_LM | CPUID_EXT3_SVM |
CPUID_EXT3_ABM | CPUID_EXT3_SSE4A,
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 21:38 ` Borislav Petkov
@ 2014-03-07 22:06 ` Dave Jones
2014-03-07 22:11 ` H. Peter Anvin
2014-03-07 22:20 ` Borislav Petkov
2014-03-09 18:07 ` Paolo Bonzini
1 sibling, 2 replies; 18+ messages in thread
From: Dave Jones @ 2014-03-07 22:06 UTC (permalink / raw)
To: Borislav Petkov
Cc: H. Peter Anvin, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
On Fri, Mar 07, 2014 at 10:38:56PM +0100, Borislav Petkov wrote:
> * Another option would be if we change the f/m/s of "qemu64" so that
> the test doesn't fire.
>
> What also makes me wonder is why is this thing even called qemu64?? AMD
> family 6 was 32-bit only CPUs so 64 is kinda wrong IMO. I mean, the
> kernel code is in "ifdef CONFIG_X86_32" block so "qemu64" is patently
> wrong naming.
Additionally, fam:6 model:6 stepping 3 never existed in the real world afaict.
I used to keep x86info's stepping db pretty up to date, and that only has knowledge
of stepping 1 & 2.[*] Modelling qemu on something from the real world might be
a better idea than inventing new special cases.
> Oh, and the thing has CPUID_EXT2_LM which is also a WTH moment for me.
> Paolo, what's going on here?
Yeah, this is a mess, there should be no family < 0xf with LM set.
Dave
[*] It's possible I somehow missed it, or the AMD rev docs never mentioned it
for some reason, but it seems unlikely.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 22:06 ` Dave Jones
@ 2014-03-07 22:11 ` H. Peter Anvin
2014-03-07 22:22 ` Dave Jones
2014-03-07 22:27 ` Fengguang Wu
2014-03-07 22:20 ` Borislav Petkov
1 sibling, 2 replies; 18+ messages in thread
From: H. Peter Anvin @ 2014-03-07 22:11 UTC (permalink / raw)
To: Dave Jones, Borislav Petkov, Fengguang Wu, Ingo Molnar,
Yinghai Lu, LKML, Paolo Bonzini
On 03/07/2014 02:06 PM, Dave Jones wrote:
> On Fri, Mar 07, 2014 at 10:38:56PM +0100, Borislav Petkov wrote:
>
> > * Another option would be if we change the f/m/s of "qemu64" so that
> > the test doesn't fire.
> >
> > What also makes me wonder is why is this thing even called qemu64?? AMD
> > family 6 was 32-bit only CPUs so 64 is kinda wrong IMO. I mean, the
> > kernel code is in "ifdef CONFIG_X86_32" block so "qemu64" is patently
> > wrong naming.
>
> Additionally, fam:6 model:6 stepping 3 never existed in the real world afaict.
> I used to keep x86info's stepping db pretty up to date, and that only has knowledge
> of stepping 1 & 2.[*] Modelling qemu on something from the real world might be
> a better idea than inventing new special cases.
>
> > Oh, and the thing has CPUID_EXT2_LM which is also a WTH moment for me.
> > Paolo, what's going on here?
>
> Yeah, this is a mess, there should be no family < 0xf with LM set.
>
> Dave
For AMD, at least. Intel obviously have a bunch of chips with family ==
6 and LM.
Perhaps Fengguang should switch from "qemu64,+smep,+smap" to something
like "Haswell,+smep,+smap" instead for the time being at least?
-hpa
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 22:06 ` Dave Jones
2014-03-07 22:11 ` H. Peter Anvin
@ 2014-03-07 22:20 ` Borislav Petkov
2014-03-07 22:27 ` Dave Jones
1 sibling, 1 reply; 18+ messages in thread
From: Borislav Petkov @ 2014-03-07 22:20 UTC (permalink / raw)
To: Dave Jones
Cc: H. Peter Anvin, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
On Fri, Mar 07, 2014 at 05:06:55PM -0500, Dave Jones wrote:
> Additionally, fam:6 model:6 stepping 3 never existed in the real
> world afaict. I used to keep x86info's stepping db pretty up to date,
> and that only has knowledge of stepping 1 & 2.[*] Modelling qemu on
> something from the real world might be a better idea than inventing
> new special cases.
Yep.
I'm afraid this qemu64 is some migration/machine snapshot model which
they're using by defining a minimal set of feature bits so that
cross-vendor migration can work. WTH do I know - virt. people are crazy
anyway - that's a given. :-P
> > Oh, and the thing has CPUID_EXT2_LM which is also a WTH moment for me.
> > Paolo, what's going on here?
>
> Yeah, this is a mess, there should be no family < 0xf with LM set.
Right.
> [*] It's possible I somehow missed it, or the AMD rev docs never mentioned it
> for some reason, but it seems unlikely.
Yeah, I think the test in the kernel is open above as a precaution in
case newer models appeared:
if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
I hardly can imagine, though, if anyone is actually booting recent
kernels on a K7. We might just as well kill this code and not even miss
it.
Btw, and sometimes when digging around, one can get lucky:
http://support.amd.com/TechDocs/23542a.pdf
K6. Ancient history stuff - I feel like I'm in a museum :-P
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 22:11 ` H. Peter Anvin
@ 2014-03-07 22:22 ` Dave Jones
2014-03-07 22:27 ` Fengguang Wu
1 sibling, 0 replies; 18+ messages in thread
From: Dave Jones @ 2014-03-07 22:22 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Borislav Petkov, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
On Fri, Mar 07, 2014 at 02:11:50PM -0800, H. Peter Anvin wrote:
> > > * Another option would be if we change the f/m/s of "qemu64" so that
> > > the test doesn't fire.
> > >
> > > What also makes me wonder is why is this thing even called qemu64?? AMD
> > > family 6 was 32-bit only CPUs so 64 is kinda wrong IMO. I mean, the
> > > kernel code is in "ifdef CONFIG_X86_32" block so "qemu64" is patently
> > > wrong naming.
> >
> > Additionally, fam:6 model:6 stepping 3 never existed in the real world afaict.
> > I used to keep x86info's stepping db pretty up to date, and that only has knowledge
> > of stepping 1 & 2.[*] Modelling qemu on something from the real world might be
> > a better idea than inventing new special cases.
> >
> > > Oh, and the thing has CPUID_EXT2_LM which is also a WTH moment for me.
> > > Paolo, what's going on here?
> >
> > Yeah, this is a mess, there should be no family < 0xf with LM set.
> >
> For AMD, at least. Intel obviously have a bunch of chips with family ==
> 6 and LM.
Yeah, speaking solely about AMD here.
Dave
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 22:20 ` Borislav Petkov
@ 2014-03-07 22:27 ` Dave Jones
2014-03-07 22:39 ` Borislav Petkov
0 siblings, 1 reply; 18+ messages in thread
From: Dave Jones @ 2014-03-07 22:27 UTC (permalink / raw)
To: Borislav Petkov
Cc: H. Peter Anvin, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
On Fri, Mar 07, 2014 at 11:20:18PM +0100, Borislav Petkov wrote:
> Yeah, I think the test in the kernel is open above as a precaution in
> case newer models appeared:
>
> if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
>
> I hardly can imagine, though, if anyone is actually booting recent
> kernels on a K7. We might just as well kill this code and not even miss
> it.
When I wrote it 10 years or so back it made more sense than it probably
does now, so I'd be ok with just dropping it all too tbh.
Machines of that vintage probably have bigger problems now anyway.
I don't recall seeing a report of the taint flag being set ever in
a Red Hat bug report, but we've seen countless problems from machines
of that era with dying ram or motherboard capacitors or..
> Btw, and sometimes when digging around, one can get lucky:
> http://support.amd.com/TechDocs/23542a.pdf
>
> K6. Ancient history stuff - I feel like I'm in a museum :-P
I still have NexGen docs somewhere ;)
Dave
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 22:11 ` H. Peter Anvin
2014-03-07 22:22 ` Dave Jones
@ 2014-03-07 22:27 ` Fengguang Wu
2014-03-07 22:34 ` Borislav Petkov
1 sibling, 1 reply; 18+ messages in thread
From: Fengguang Wu @ 2014-03-07 22:27 UTC (permalink / raw)
To: H. Peter Anvin
Cc: Dave Jones, Borislav Petkov, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
On Fri, Mar 07, 2014 at 02:11:50PM -0800, H. Peter Anvin wrote:
> On 03/07/2014 02:06 PM, Dave Jones wrote:
> > On Fri, Mar 07, 2014 at 10:38:56PM +0100, Borislav Petkov wrote:
> >
> > > * Another option would be if we change the f/m/s of "qemu64" so that
> > > the test doesn't fire.
> > >
> > > What also makes me wonder is why is this thing even called qemu64?? AMD
> > > family 6 was 32-bit only CPUs so 64 is kinda wrong IMO. I mean, the
> > > kernel code is in "ifdef CONFIG_X86_32" block so "qemu64" is patently
> > > wrong naming.
> >
> > Additionally, fam:6 model:6 stepping 3 never existed in the real world afaict.
> > I used to keep x86info's stepping db pretty up to date, and that only has knowledge
> > of stepping 1 & 2.[*] Modelling qemu on something from the real world might be
> > a better idea than inventing new special cases.
> >
> > > Oh, and the thing has CPUID_EXT2_LM which is also a WTH moment for me.
> > > Paolo, what's going on here?
> >
> > Yeah, this is a mess, there should be no family < 0xf with LM set.
> >
> > Dave
>
> For AMD, at least. Intel obviously have a bunch of chips with family ==
> 6 and LM.
>
> Perhaps Fengguang should switch from "qemu64,+smep,+smap" to something
> like "Haswell,+smep,+smap" instead for the time being at least?
Yeah I confirmed that it works w/o the warning!
[ 0.575854] smpboot: CPU0: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01)
Thanks!
Fengguang
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 22:27 ` Fengguang Wu
@ 2014-03-07 22:34 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2014-03-07 22:34 UTC (permalink / raw)
To: Fengguang Wu
Cc: H. Peter Anvin, Dave Jones, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
On Sat, Mar 08, 2014 at 06:27:50AM +0800, Fengguang Wu wrote:
> Yeah I confirmed that it works w/o the warning!
>
> [ 0.575854] smpboot: CPU0: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01)
Hahah, Haswell is just a couple models away from K7: model 6 vs
model 3c, same family 6 though. So shouldn't be a big difference
performance-wise.
Wohahahahha... :-))))))
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 22:27 ` Dave Jones
@ 2014-03-07 22:39 ` Borislav Petkov
0 siblings, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2014-03-07 22:39 UTC (permalink / raw)
To: Dave Jones
Cc: H. Peter Anvin, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML,
Paolo Bonzini
On Fri, Mar 07, 2014 at 05:27:43PM -0500, Dave Jones wrote:
> When I wrote it 10 years or so back it made more sense than it
> probably does now, so I'd be ok with just dropping it all too tbh.
> Machines of that vintage probably have bigger problems now anyway.
Yeah.
> I don't recall seeing a report of the taint flag being set ever in
> a Red Hat bug report, but we've seen countless problems from machines
> of that era with dying ram or motherboard capacitors or..
Right, this should be a sufficient indicator that those machines won't
be running modern kernels anymore :-)
Oh, and besides, this really frees up that taint bit TAINT_UNSAFE_SMP
for the forcepae thing. Let me cook up a patch - it looks like 3.14
will be the release where we're getting rid of old platforms - look at
tip/x86/nuke-platforms. :-)
> I still have NexGen docs somewhere ;)
Uuuh, more than ancient, make sure to hold on to those :-)
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-07 21:38 ` Borislav Petkov
2014-03-07 22:06 ` Dave Jones
@ 2014-03-09 18:07 ` Paolo Bonzini
2014-03-09 18:50 ` Borislav Petkov
2014-03-10 0:01 ` H. Peter Anvin
1 sibling, 2 replies; 18+ messages in thread
From: Paolo Bonzini @ 2014-03-09 18:07 UTC (permalink / raw)
To: Borislav Petkov, H. Peter Anvin
Cc: Dave Jones, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML
Il 07/03/2014 22:38, Borislav Petkov ha scritto:
> + Paolo.
>
> (drop Andreas' old, invalid now email).
>
> On Fri, Mar 07, 2014 at 01:01:22PM -0800, H. Peter Anvin wrote:
>>> qemu64 triggers this ? That spew comes from amd_k7_smp_check()
>>> which should only run on family 6, which was all 32bit.
>>
>> [ 0.152749] smpboot: CPU0: AMD QEMU Virtual CPU version 1.6.0 (fam:
>> 06, model: 02, stepping: 03)
>>
>> Seems they are using a really odd CPUID combination, then.
>
> qemu64 is (family, model, stepping) (6/6/3) and it runs into the
> amd_k7_smp_check() when booting a 32-bit kernel:
tl;dr: do not use qemu64, especially in system emulation mode. In user
mode it should work, user mode programs are less susceptible to bogus
family/member/stepping. When using dynamic translation in system
emulation mode, use Haswell,+smap or Opteron_G3,+smep,+smap. When using
KVM, use whatever CPU model you're running on (or a least common
denominator if doing migration).
qemu64's family/member/stepping makes no sense at all. It is a really
odd combination that means "enable all features that the QEMU dynamic
translator supported at some time where people cared about -cpu qemu64".
So it has SVM and at the same time it misses SMEP/SMAP. It also lacks
some instruction set extensions such as BMI and ADX that QEMU does
implement (I don't know if the kernel has any hand-optimized assembly
that uses them).
*** If the above already worsened your opinion of virt people, skip
*** the next three paragraphs. I don't want to give you a bad day.
On KVM we always make the vendor the same as the host because of the
sysenter/syscall mess in 32-bit mode (AMD supports one and Intel
supports the other). But even if you're using Intel the
family/member/stepping remains AMD!
We really should give a loud warning if qemu64 is used with KVM. It
makes no sense with KVM, even less than it does with dynamic translation.
On TCG it does make some sense that vendor is AMD, because QEMU can
emulate SVM. So perhaps we could change the family/member/stepping to
e.g. an Opteron G3 (the last AMD chip without xsave/xrstor), but then
with KVM you would have family=15 on Intel and I don't want to go there.
Perhaps we could give a loud warning with qemu64+KVM, and then do the
above.
> So, even if we enable X86_FEATURE_MP in qemu for the "qemu64" model
> (diff below), which is, or rather used to be CPUID_80000001[19] for K7,
> qemu goes and asks the host which CPUID bits it supports and filters
> those bits out from the requested features.
You're not adding the bit to TCG_EXT2_FEATURES, so it's masked out.
The patch has also some backwards-compatibility gunk missing, and we're
in hard-freeze now, but if you remind me at the end of April (I'm on
vacation until April 23) I'll try to fix all this mess for QEMU 2.1.
> Oh, and the thing has CPUID_EXT2_LM which is also a WTH moment for me.
Well, it's "64" for a reason. LM in qemu64 is perhaps the only thing
that makes sense. :)
Paolo
> Paolo, what's going on here?
>
> Anyway, this is how it looks from here.
>
> diff --git a/target-i386/cpu.c b/target-i386/cpu.c
> index 0e8812a11d1e..981ce9ea992b 100644
> --- a/target-i386/cpu.c
> +++ b/target-i386/cpu.c
> @@ -565,7 +565,8 @@ static x86_def_t builtin_x86_defs[] = {
> CPUID_EXT_SSE3 | CPUID_EXT_CX16 | CPUID_EXT_POPCNT,
> .features[FEAT_8000_0001_EDX] =
> (PPRO_FEATURES & CPUID_EXT2_AMD_ALIASES) |
> - CPUID_EXT2_LM | CPUID_EXT2_SYSCALL | CPUID_EXT2_NX,
> + CPUID_EXT2_LM | CPUID_EXT2_SYSCALL | CPUID_EXT2_NX |
> + CPUID_EXT2_MP,
> .features[FEAT_8000_0001_ECX] =
> CPUID_EXT3_LAHF_LM | CPUID_EXT3_SVM |
> CPUID_EXT3_ABM | CPUID_EXT3_SSE4A,
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-09 18:07 ` Paolo Bonzini
@ 2014-03-09 18:50 ` Borislav Petkov
2014-03-10 0:01 ` H. Peter Anvin
1 sibling, 0 replies; 18+ messages in thread
From: Borislav Petkov @ 2014-03-09 18:50 UTC (permalink / raw)
To: Paolo Bonzini
Cc: H. Peter Anvin, Dave Jones, Fengguang Wu, Ingo Molnar, Yinghai Lu,
LKML
On Sun, Mar 09, 2014 at 07:07:02PM +0100, Paolo Bonzini wrote:
> tl;dr: do not use qemu64, especially in system emulation mode. In
> user mode it should work, user mode programs are less susceptible to
> bogus family/member/stepping. When using dynamic translation in
> system emulation mode, use Haswell,+smap or Opteron_G3,+smep,+smap.
> When using KVM, use whatever CPU model you're running on (or a least
> common denominator if doing migration).
>
> qemu64's family/member/stepping makes no sense at all. It is a
> really odd combination that means "enable all features that the QEMU
> dynamic translator supported at some time where people cared about
> -cpu qemu64". So it has SVM and at the same time it misses
> SMEP/SMAP. It also lacks some instruction set extensions such as
> BMI and ADX that QEMU does implement (I don't know if the kernel has
> any hand-optimized assembly that uses them).
Nope, not yet. It would definitely be worth to check to see whether they
bring anything performance-wise and if so, alternative-lize them in :-)
> *** If the above already worsened your opinion of virt people, skip
> *** the next three paragraphs. I don't want to give you a bad day.
qemu+kvm can never worsen my opinion - it is my favourite virt solution!
:-)
> On KVM we always make the vendor the same as the host because of the
> sysenter/syscall mess in 32-bit mode (AMD supports one and Intel
> supports the other).
Oh yeah, there was that.
> But even if you're using Intel the family/member/stepping remains AMD!
Right.
> We really should give a loud warning if qemu64 is used with KVM. It
> makes no sense with KVM, even less than it does with dynamic
> translation.
Right, yes, so Fengguang did switch to the Haswell model now so the
issue at hand is addressed.
> On TCG it does make some sense that vendor is AMD, because QEMU can
> emulate SVM. So perhaps we could change the family/member/stepping
> to e.g. an Opteron G3 (the last AMD chip without xsave/xrstor),
I'm looking at target-i386/cpu.c and Opteron_G3 is family 15 decimal.
However, the last AMD Opteron which *didn't* have XSAVE (CPUID
Fn0000_0001_ECX[26]) is family 0x10 AFAIR, i.e. 16 decimal. I dunno
though, whether correcting that would cause other grief. It might be
worth a try to start cleaning up that mess though. :-P
> but then with KVM you would have family=15 on Intel and I don't want
> to go there. Perhaps we could give a loud warning with qemu64+KVM, and
> then do the above.
Yeah, if this warning saves people some time when having to look into
it, it might be worth it.
> You're not adding the bit to TCG_EXT2_FEATURES, so it's masked out.
Ah, there was that too.
But filter_features_for_kvm() clears it too because that bit is reserved
in CPUID on newer AMD and Intel hosts.
> The patch has also some backwards-compatibility gunk missing, and
> we're in hard-freeze now, but if you remind me at the end of April
> (I'm on vacation until April 23) I'll try to fix all this mess for
> QEMU 2.1.
That's some serious vacation - kinda like month and a half. :-)
But I'll probably forget so put it on your TODO list :-) I'm willing to
help out reviewing, should the need arise.
> Well, it's "64" for a reason. LM in qemu64 is perhaps the only
> thing that makes sense. :)
Hahaa.
Thanks for the info!
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd()
2014-03-09 18:07 ` Paolo Bonzini
2014-03-09 18:50 ` Borislav Petkov
@ 2014-03-10 0:01 ` H. Peter Anvin
1 sibling, 0 replies; 18+ messages in thread
From: H. Peter Anvin @ 2014-03-10 0:01 UTC (permalink / raw)
To: Paolo Bonzini, Borislav Petkov
Cc: Dave Jones, Fengguang Wu, Ingo Molnar, Yinghai Lu, LKML
On 03/09/2014 11:07 AM, Paolo Bonzini wrote:
>
> We really should give a loud warning if qemu64 is used with KVM. It
> makes no sense with KVM, even less than it does with dynamic translation.
>
Well, this is dynamic translation.
-hpa
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2014-03-10 0:01 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-03-07 1:58 [qemu64,+smep,+smap] WARNING: CPU: 1 PID: 0 at arch/x86/kernel/cpu/amd.c:220 init_amd() Fengguang Wu
2014-03-07 5:03 ` H. Peter Anvin
2014-03-07 5:50 ` Fengguang Wu
2014-03-07 18:56 ` H. Peter Anvin
2014-03-07 19:10 ` Dave Jones
2014-03-07 21:01 ` H. Peter Anvin
2014-03-07 21:38 ` Borislav Petkov
2014-03-07 22:06 ` Dave Jones
2014-03-07 22:11 ` H. Peter Anvin
2014-03-07 22:22 ` Dave Jones
2014-03-07 22:27 ` Fengguang Wu
2014-03-07 22:34 ` Borislav Petkov
2014-03-07 22:20 ` Borislav Petkov
2014-03-07 22:27 ` Dave Jones
2014-03-07 22:39 ` Borislav Petkov
2014-03-09 18:07 ` Paolo Bonzini
2014-03-09 18:50 ` Borislav Petkov
2014-03-10 0:01 ` H. Peter Anvin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).