From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Matthias Brugger <matthias.bgg@gmail.com>, linux-kernel@vger.kernel.org
Cc: mark.rutland@arm.com, andrew@lunn.ch, linux-doc@vger.kernel.org,
thierry.reding@gmail.com, heiko.stuebner@bq.com,
linux@arm.linux.org.uk, daniel.lezcano@linaro.org,
florian.vaussard@epfl.ch, sebastian.hesselbarth@gmail.com,
devicetree@vger.kernel.org, jason@lakedaemon.net,
pawel.moll@arm.com, ijc+devicetree@hellion.org.uk,
robh+dt@kernel.org, tglx@linutronix.de,
linux-arm-kernel@lists.infradead.org, rdunlap@infradead.org,
silvio.fricke@gmail.com, galak@codeaurora.org, olof@lixom.net,
jic23@kernel.org
Subject: Re: [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards
Date: Wed, 09 Apr 2014 20:26:40 +0000 [thread overview]
Message-ID: <5345AD00.9020508@free-electrons.com> (raw)
In-Reply-To: <1397072736-10793-4-git-send-email-matthias.bgg@gmail.com>
Hi Matthias,
On 09/04/2014 19:45, Matthias Brugger wrote:
> This adds a generic devicetree board file and a dtsi for boards
> based on the MT6589 SoCs from Mediatek.
>
> Apart from the generic parts (gic, clocks) the only component
> currently supported are the timers.
>
> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm/Kconfig | 2 +
> arch/arm/Makefile | 1 +
> arch/arm/boot/dts/mtk6589.dtsi | 105 ++++++++++++++++++++
> arch/arm/mach-mediatek/Kconfig | 14 +++
> arch/arm/mach-mediatek/Makefile | 1 +
> arch/arm/mach-mediatek/mediatek.c | 40 ++++++++
> 7 files changed, 164 insertions(+)
> create mode 100644 arch/arm/boot/dts/mtk6589.dtsi
> create mode 100644 arch/arm/mach-mediatek/Kconfig
> create mode 100644 arch/arm/mach-mediatek/Makefile
> create mode 100644 arch/arm/mach-mediatek/mediatek.c
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 0f01c9b..af48801 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -67,6 +67,7 @@ linux Linux-specific binding
> lsi LSI Corp. (LSI Logic)
> marvell Marvell Technology Group Ltd.
> maxim Maxim Integrated Products
> +mediatek MediaTek Inc.
> microchip Microchip Technology Inc.
> mosaixtech Mosaix Technologies, Inc.
> moxa Moxa
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 5db05f6a..04d46ec 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -995,6 +995,8 @@ source "arch/arm/mach-mv78xx0/Kconfig"
>
> source "arch/arm/mach-imx/Kconfig"
>
> +source "arch/arm/mach-mediatek/Kconfig"
> +
> source "arch/arm/mach-mxs/Kconfig"
>
> source "arch/arm/mach-netx/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 41c1931..8ce9774 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -170,6 +170,7 @@ machine-$(CONFIG_ARCH_MSM) += msm
> machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
> machine-$(CONFIG_ARCH_MVEBU) += mvebu
> machine-$(CONFIG_ARCH_MXC) += imx
> +machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
> machine-$(CONFIG_ARCH_MXS) += mxs
> machine-$(CONFIG_ARCH_NETX) += netx
> machine-$(CONFIG_ARCH_NOMADIK) += nomadik
> diff --git a/arch/arm/boot/dts/mtk6589.dtsi b/arch/arm/boot/dts/mtk6589.dtsi
> new file mode 100644
> index 0000000..6dbb74f
> --- /dev/null
> +++ b/arch/arm/boot/dts/mtk6589.dtsi
> @@ -0,0 +1,105 @@
> +/*
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Matthias Brugger <matthias.bgg@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt6589";
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + next-level-cache = <&L2>;
> + reg = <0x0>;
> + };
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + next-level-cache = <&L2>;
> + reg = <0x1>;
> + };
> + cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + next-level-cache = <&L2>;
> + reg = <0x2>;
> + };
> + cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + next-level-cache = <&L2>;
> + reg = <0x3>;
> + };
> +
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + system_clk: system_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <13000000>;
> + #clock-cells = <0>;
> + clock-output-names = "system_clk";
> + };
Is it really a fixed clock without any parent, or do you
declare it as a fixed clock because you don't have any clock
common framework support yet?
> +
> + rtc_clk: rtc_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + clock-output-names = "rtc_clk";
> + };
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + clock-ranges;
> + ranges;
> +
> + gic: interrupt-controller@10212000 {
> + compatible = "arm,cortex-a9-gic";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0x10211000 0x1000>,
> + <0x10212000 0x1000>;
> + };
> +
> + L2: l2-cache-controller@1020e000 {
> + compatible = "arm,pl310-cache";
> + reg = <0x1020e000 0x1000>;
> + cache-unified;
> + cache-level = <2>;
> + };
> +
> + timer: timer@10008000 {
> + compatible = "mediatek,mtk6589-timer";
> + reg = <0x10008000 0x80>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&system_clk>, <&rtc_clk>;
> + clock-names = "sys_clk", "rtc_clk";
> + };
> + };
> +};
> diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
> new file mode 100644
> index 0000000..c0139ca
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/Kconfig
> @@ -0,0 +1,14 @@
> +config ARCH_MEDIATEK
> + bool "Mediatek MT6589 SoC" if ARCH_MULTI_V7
> + select ARCH_REQUIRE_GPIOLIB
> + select ARM_GIC
> + select CACHE_L2X0
> + select HAVE_ARM_TWD if LOCAL_TIMERS
LOCAL_TIMERS no longer exist
> + select HAVE_SMP
> + select LOCAL_TIMERS if SMP
ditto
so what about this instead:
select HAVE_ARM_TWD if SMP
The rest of this patch looks good.
Thanks,
Gregory
> + select COMMON_CLK
> + select GENERIC_CLOCKEVENTS
> + select MTK_TIMER
> + select CLKSRC_MMIO
> + help
> + Support for Mediatek Cortex-A7 Quad-Core-SoC MT6589.
> diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
> new file mode 100644
> index 0000000..43e619f
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
> diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
> new file mode 100644
> index 0000000..f630403
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/mediatek.c
> @@ -0,0 +1,40 @@
> +/*
> + * Device Tree support for Mediatek SoCs
> + *
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Matthias Brugger <matthias.bgg@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_platform.h>
> +#include <linux/irqchip.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <asm/hardware/cache-l2x0.h>
> +
> +static void __init mediatek_dt_init(void)
> +{
> + l2x0_of_init(0, ~0);
> + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +}
> +
> +static const char * const mediatek_board_dt_compat[] = {
> + "mediatek,mt6589",
> + NULL,
> +};
> +
> +DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)")
> + .init_machine = mediatek_dt_init,
> + .dt_compat = mediatek_board_dt_compat,
> +MACHINE_END
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2014-04-09 20:26 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-09 19:45 [PATCH 0/4] arm: Add basic support for Mediatek Cortex-A7 SoCs Matthias Brugger
2014-04-09 19:45 ` [PATCH 1/4] clocksource: Add support for the Mediatek SoCs Matthias Brugger
2014-04-09 20:58 ` Stephen Boyd
2014-04-09 21:08 ` Gregory CLEMENT
2014-04-09 21:52 ` Olof Johansson
2014-04-11 9:07 ` Matthias Brugger
2014-04-11 9:21 ` Arnd Bergmann
2014-04-09 19:45 ` [PATCH 2/4] dt-bindings: add mtk-timer bindings Matthias Brugger
2014-04-09 20:56 ` Gregory CLEMENT
2014-04-09 19:45 ` [PATCH 3/4] arm: add basic support for Mediatek MT6589 boards Matthias Brugger
2014-04-09 20:26 ` Gregory CLEMENT [this message]
2014-04-10 8:29 ` Matthias Brugger
2014-04-10 8:46 ` Gregory CLEMENT
2014-04-10 9:34 ` Heiko Stübner
2014-04-10 9:36 ` Arnd Bergmann
2014-04-09 21:50 ` Rob Herring
2014-04-10 9:01 ` Marc Zyngier
2014-04-10 7:36 ` Arnd Bergmann
2014-04-09 19:45 ` [PATCH 4/4] arm: mediatek: Add earlyprintk support for MT6589 Matthias Brugger
2014-04-09 20:54 ` Gregory CLEMENT
2014-04-09 21:39 ` Rob Herring
2014-04-10 8:22 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5345AD00.9020508@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.vaussard@epfl.ch \
--cc=galak@codeaurora.org \
--cc=heiko.stuebner@bq.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jason@lakedaemon.net \
--cc=jic23@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=silvio.fricke@gmail.com \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox