Re: [PATCH] pinctrl-baytrail: fix for irq descriptor conflict on ASUS T100TA

["Jin, Yao" <yao.jin@linux.intel.com>]

Thanks Mika, I will fix this warning.

On 2014/4/22 19:51, Mika Westerberg wrote:
> On Wed, Apr 16, 2014 at 08:05:59PM +0800, Jin Yao wrote:
>> A crash is triggered on the ASUS T100TA Baytrail-T because of a irq 
>> descriptor conflict. There are two gpio triggered acpi events in this
>> device, GPIO 6 and 18. These gpios are translated to irqs by calling
>> gpio_to_irq which in turn will call irq_create_mapping(vg->domain, offset).
>> irq_create_mapping will take care of allocating the irq descriptor, taking
>> the first available number starting from the given value (6 in our case).
>> The 0-15 are already reserved by legacy ISA code, so it gets the first
>> free irq descriptor which is number 16. The i915 driver also uses irq 16,
>> it loads later than gpio and crashes in probe.
>>
>> The bug is reported here:
>> https://bugzilla.kernel.org/show_bug.cgi?id=68291
>>
>> The rootcause we know now is a low level irq issue. It needs a long term
>> solution to fix the issue in irq system.
>>
>> This patch changes the Baytrail GPIO driver to avoid the irq descriptor
>> conflict. It still uses the irq domain to allocate irq descriptor but start
>> from a predefined irq base number (256) to avoid the conflict.
>>
>> Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
> 
> I'm getting following warnings when compiling this:
> 
> drivers/pinctrl/pinctrl-baytrail.c: In function ‘byt_gpio_probe’:
> drivers/pinctrl/pinctrl-baytrail.c:512:4: warning: passing argument 3 of
> ‘kstrtol’ from incompatible pointer type [enabled by default]
>     ret = kstrtol(range->name, 10, &i);
>     ^
> In file included from drivers/pinctrl/pinctrl-baytrail.c:22:0:
> include/linux/kernel.h:301:32: note: expected ‘long int *’ but argument is
> of type ‘int *’
>  static inline int __must_check kstrtol(const char *s, unsigned int base, long *res)
>