From: Chen Gang <gang.chen.5i5j@gmail.com>
To: JBottomley@parallels.com,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: linux-scsi@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause"
Date: Fri, 09 May 2014 07:45:20 +0800 [thread overview]
Message-ID: <536C1710.1010108@gmail.com> (raw)
The direct cause is IRQ_SPI is already defined as a macro in unicore32
architecture (also, blackfin and mips architectures define it). The
related error (unicore32 with allmodconfig)
CC [M] drivers/scsi/mvsas/mv_94xx.o
In file included from drivers/scsi/mvsas/mv_94xx.c:27:
drivers/scsi/mvsas/mv_94xx.h:176: error: expected identifier before numeric constant
And "enum pci_interrupt_cause" may will be useful for kernel drivers,
although at present, it is not used in kernel. So add 'MVS_' for it.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
---
drivers/scsi/mvsas/mv_94xx.h | 58 ++++++++++++++++++++++----------------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 487aa6f..14e1974 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -150,35 +150,35 @@ enum chip_register_bits {
enum pci_interrupt_cause {
/* MAIN_IRQ_CAUSE (R10200) Bits*/
- IRQ_COM_IN_I2O_IOP0 = (1 << 0),
- IRQ_COM_IN_I2O_IOP1 = (1 << 1),
- IRQ_COM_IN_I2O_IOP2 = (1 << 2),
- IRQ_COM_IN_I2O_IOP3 = (1 << 3),
- IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
- IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
- IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
- IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
- IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
- IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
- IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
- IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
- IRQ_PCIF_DRBL0 = (1 << 12),
- IRQ_PCIF_DRBL1 = (1 << 13),
- IRQ_PCIF_DRBL2 = (1 << 14),
- IRQ_PCIF_DRBL3 = (1 << 15),
- IRQ_XOR_A = (1 << 16),
- IRQ_XOR_B = (1 << 17),
- IRQ_SAS_A = (1 << 18),
- IRQ_SAS_B = (1 << 19),
- IRQ_CPU_CNTRL = (1 << 20),
- IRQ_GPIO = (1 << 21),
- IRQ_UART = (1 << 22),
- IRQ_SPI = (1 << 23),
- IRQ_I2C = (1 << 24),
- IRQ_SGPIO = (1 << 25),
- IRQ_COM_ERR = (1 << 29),
- IRQ_I2O_ERR = (1 << 30),
- IRQ_PCIE_ERR = (1 << 31),
+ MVS_IRQ_COM_IN_I2O_IOP0 = (1 << 0),
+ MVS_IRQ_COM_IN_I2O_IOP1 = (1 << 1),
+ MVS_IRQ_COM_IN_I2O_IOP2 = (1 << 2),
+ MVS_IRQ_COM_IN_I2O_IOP3 = (1 << 3),
+ MVS_IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
+ MVS_IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
+ MVS_IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
+ MVS_IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
+ MVS_IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
+ MVS_IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
+ MVS_IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
+ MVS_IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
+ MVS_IRQ_PCIF_DRBL0 = (1 << 12),
+ MVS_IRQ_PCIF_DRBL1 = (1 << 13),
+ MVS_IRQ_PCIF_DRBL2 = (1 << 14),
+ MVS_IRQ_PCIF_DRBL3 = (1 << 15),
+ MVS_IRQ_XOR_A = (1 << 16),
+ MVS_IRQ_XOR_B = (1 << 17),
+ MVS_IRQ_SAS_A = (1 << 18),
+ MVS_IRQ_SAS_B = (1 << 19),
+ MVS_IRQ_CPU_CNTRL = (1 << 20),
+ MVS_IRQ_GPIO = (1 << 21),
+ MVS_IRQ_UART = (1 << 22),
+ MVS_IRQ_SPI = (1 << 23),
+ MVS_IRQ_I2C = (1 << 24),
+ MVS_IRQ_SGPIO = (1 << 25),
+ MVS_IRQ_COM_ERR = (1 << 29),
+ MVS_IRQ_I2O_ERR = (1 << 30),
+ MVS_IRQ_PCIE_ERR = (1 << 31),
};
union reg_phy_cfg {
--
1.9.2.459.g68773ac
next reply other threads:[~2014-05-08 23:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 23:45 Chen Gang [this message]
2014-05-09 1:09 ` [PATCH] drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause" Chen Gang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536C1710.1010108@gmail.com \
--to=gang.chen.5i5j@gmail.com \
--cc=JBottomley@parallels.com \
--cc=gregkh@linuxfoundation.org \
--cc=gxt@mprc.pku.edu.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox