public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andreas Larsson <andreas@gaisler.com>
To: Himangi Saraogi <himangi774@gmail.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jan Andersson <jan@gaisler.com>
Cc: julia.lawall@lip6.fr
Subject: Re: [PATCH v3] usb: host: uhci-grlib.c : use devm_ functions
Date: Thu, 12 Jun 2014 07:49:21 +0200	[thread overview]
Message-ID: <53993F61.10209@gaisler.com> (raw)
In-Reply-To: <20140611183823.GA10519@himangi-Dell>

On 2014-06-11 20:38, Himangi Saraogi wrote:
> The various devm_ functions allocate memory that is released when a
> driver detaches. This patch uses devm_ioremap_resource for data
> that is allocated in the probe function of a platform device and
> is only freed in the remove function. The corresponding free functions
> are removed and two labels are done away with. Also, linux/device.h
> is added to make sure the devm_*() routine declarations are
> unambiguously available.
>
> Signed-off-by: Himangi Saraogi <himangi774@gmail.com>

Looks and works fine now!

Acked-by: Andreas Larsson <andreas@gaisler.com>

Best regards,
Andreas Larsson

> ---
> Not compile tested due to incompatible architecture.
> v3: pass correct arguments to devm_ioremap_resource
>
>   drivers/usb/host/uhci-grlib.c | 31 +++++++++----------------------
>   1 file changed, 9 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
> index ab25dc3..05f57ff 100644
> --- a/drivers/usb/host/uhci-grlib.c
> +++ b/drivers/usb/host/uhci-grlib.c
> @@ -17,6 +17,7 @@
>    * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
>    */
>
> +#include <linux/device.h>
>   #include <linux/of_irq.h>
>   #include <linux/of_address.h>
>   #include <linux/of_platform.h>
> @@ -113,24 +114,17 @@ static int uhci_hcd_grlib_probe(struct platform_device *op)
>   	hcd->rsrc_start = res.start;
>   	hcd->rsrc_len = resource_size(&res);
>
> -	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
> -		printk(KERN_ERR "%s: request_mem_region failed\n", __FILE__);
> -		rv = -EBUSY;
> -		goto err_rmr;
> -	}
> -
>   	irq = irq_of_parse_and_map(dn, 0);
>   	if (irq == NO_IRQ) {
>   		printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
>   		rv = -EBUSY;
> -		goto err_irq;
> +		goto err_usb;
>   	}
>
> -	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
> -	if (!hcd->regs) {
> -		printk(KERN_ERR "%s: ioremap failed\n", __FILE__);
> -		rv = -ENOMEM;
> -		goto err_ioremap;
> +	hcd->regs = devm_ioremap_resource(&op->dev, &res);
> +	if (IS_ERR(hcd->regs)) {
> +		rv = PTR_ERR(hcd->regs);
> +		goto err_irq;
>   	}
>
>   	uhci = hcd_to_uhci(hcd);
> @@ -139,18 +133,14 @@ static int uhci_hcd_grlib_probe(struct platform_device *op)
>
>   	rv = usb_add_hcd(hcd, irq, 0);
>   	if (rv)
> -		goto err_uhci;
> +		goto err_irq;
>
>   	device_wakeup_enable(hcd->self.controller);
>   	return 0;
>
> -err_uhci:
> -	iounmap(hcd->regs);
> -err_ioremap:
> -	irq_dispose_mapping(irq);
>   err_irq:
> -	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> -err_rmr:
> +	irq_dispose_mapping(irq);
> +err_usb:
>   	usb_put_hcd(hcd);
>
>   	return rv;
> @@ -164,10 +154,7 @@ static int uhci_hcd_grlib_remove(struct platform_device *op)
>
>   	usb_remove_hcd(hcd);
>
> -	iounmap(hcd->regs);
>   	irq_dispose_mapping(hcd->irq);
> -	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> -
>   	usb_put_hcd(hcd);
>
>   	return 0;
>

      parent reply	other threads:[~2014-06-12  5:50 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-11 18:38 [PATCH v3] usb: host: uhci-grlib.c : use devm_ functions Himangi Saraogi
2014-06-11 18:54 ` Alan Stern
2014-06-12  5:49 ` Andreas Larsson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53993F61.10209@gaisler.com \
    --to=andreas@gaisler.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=himangi774@gmail.com \
    --cc=jan@gaisler.com \
    --cc=julia.lawall@lip6.fr \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox