linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Keerthy <a0393675@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>, Keerthy <j-keerthy@ti.com>,
	<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<t-kristo@ti.com>
Subject: Re: [PATCH] regulator: tps65917: Fix SMPS enable/disable/is_enable
Date: Mon, 30 Jun 2014 10:41:04 +0530	[thread overview]
Message-ID: <53B0F168.7050709@ti.com> (raw)
In-Reply-To: <20140627171503.GA26734@kahuna>

Hi Nishanth,

On Friday 27 June 2014 10:45 PM, Nishanth Menon wrote:
> On 14:48-20140627, Keerthy wrote:
>> Hello Nishanth,
>>
>> On Friday 27 June 2014 12:01 AM, Nishanth Menon wrote:
>>> We use regmap regulator ops to enable/disable and check if regulator
>>> is enabled for various SMPS. However, these depend on valid
>>> enable_reg, enable_mask and enable_value in regulator descriptor.
>>>
>>> So, similar to fix we did in commit 318dbb02b50c
>>> ("regulator: palmas: Fix SMPS enable/disable/is_enabled"), populate the
>>> same for TPS65917 SMPS registration. LDO definitions are already in place.
>>>
>>> Fixes: d6f83370ed97 ("regulator: palmas: Add tps65917 PMIC support")
>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>> ---
>>>
>>> Applies on:
>>> 	git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
>>> branch: topic/palmas (4c0c9ca Merge remote-tracking branch 'regulator/fix/palmas' into regulator-palmas)
>>>
>>> Note: Ignored the minor style check from checkpatch --strict as fixing
>>> it would create an 80 char warning
>>>
>>>   drivers/regulator/palmas-regulator.c |    8 ++++++++
>>>   1 file changed, 8 insertions(+)
>>>
>>> diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
>>> index 7c8b441..c7aa1b1 100644
>>> --- a/drivers/regulator/palmas-regulator.c
>>> +++ b/drivers/regulator/palmas-regulator.c
>>> @@ -1333,6 +1333,14 @@ static int tps65917_smps_registration(struct palmas_pmic *pmic,
>>>   		pmic->current_reg_mode[id] = reg &
>>>   				PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
>>> +		pmic->desc[id].enable_reg =
>>> +				PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
>>> +					palmas_regs_info[id].ctrl_addr);
>> This is wrong. Please change palmas_regs_info[id].ctrl_addr to
>> ddata->palmas_regs_info[id].ctrl_addr. The palmas_regs_info
>> should come from the driver data for specific instances as the regmap
>> is different for the different PMICs we support.
>>
>> Once you make the above changes please feel free to add
> Uggh.. just realized... since I was testing CPUFREQ with SMPS1 never
> realized it. and searched elsewhere on topic/palmas branch as well..
> Looks like we should make the following changes? since the register data
> is now a parameter and it so happened that palmas_reg_info was mapping
> back to a valid variable and the error is easily missed - so rename the
> variable as well - I can break this up as proper series of patches for
> topic/palmas - let me know what you think..
>
>
> diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
> index 7c8b441..86fefdfb 100644
> --- a/drivers/regulator/palmas-regulator.c
> +++ b/drivers/regulator/palmas-regulator.c
> @@ -41,7 +41,7 @@ static const struct regulator_linear_range smps_high_ranges[] = {
>   	REGULATOR_LINEAR_RANGE(3300000, 0x7A, 0x7f, 0),
>   };
>   
> -static struct regs_info palmas_regs_info[] = {
> +static struct regs_info palmas_generic_regs_info[] = {


Good renaming but You need to make one more change i guess. Otherwise
there is a compilation break.

@@ -643,7 +643,8 @@
static int palmas_regulator_config_external(struct palmas *palmas, int id,
          struct palmas_reg_init *reg_init)
{
-    int sleep_id = palmas_regs_info[id].sleep_id;
+    struct palmas_pmic_driver_data *ddata = palmas->pmic_ddata;
+    int sleep_id = ddata->palmas_regs_info[id].sleep_id;
      int ret;

Including the above change.
Tested-by: Keerthy <j-keerthy@ti.com>.

>   	{
>   		.name		= "SMPS12",
>   		.sname		= "smps1-in",
> @@ -1165,18 +1165,18 @@ static int palmas_smps_registration(struct palmas_pmic *pmic,
>   			pmic->desc[id].ops = &palmas_ops_smps10;
>   			pmic->desc[id].vsel_reg =
>   					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
> -							PALMAS_SMPS10_CTRL);
> +					        ddata->palmas_regs_info[id].ctrl_addr);
>   			pmic->desc[id].vsel_mask = SMPS10_VSEL;
>   			pmic->desc[id].enable_reg =
>   					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
> -							PALMAS_SMPS10_CTRL);
> +					        ddata->palmas_regs_info[id].ctrl_addr);
>   			if (id == PALMAS_REG_SMPS10_OUT1)
>   				pmic->desc[id].enable_mask = SMPS10_SWITCH_EN;
>   			else
>   				pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
>   			pmic->desc[id].bypass_reg =
>   					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
> -							PALMAS_SMPS10_CTRL);
> +					        ddata->palmas_regs_info[id].ctrl_addr);
>   			pmic->desc[id].bypass_mask = SMPS10_BYPASS_EN;
>   			pmic->desc[id].min_uV = 3750000;
>   			pmic->desc[id].uV_step = 1250000;
> @@ -1188,7 +1188,7 @@ static int palmas_smps_registration(struct palmas_pmic *pmic,
>   			 * otherwise we error in probe with unsupportable
>   			 * ranges. Read the current smps mode for later use.
>   			 */
> -			addr = palmas_regs_info[id].vsel_addr;
> +			addr = ddata->palmas_regs_info[id].vsel_addr;
>   			pmic->desc[id].n_linear_ranges = 3;
>   
>   			ret = palmas_smps_read(pmic->palmas, addr, &reg);
> @@ -1209,12 +1209,12 @@ static int palmas_smps_registration(struct palmas_pmic *pmic,
>   			pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
>   			pmic->desc[id].vsel_reg =
>   					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
> -						palmas_regs_info[id].vsel_addr);
> +						ddata->palmas_regs_info[id].vsel_addr);
>   			pmic->desc[id].vsel_mask =
>   					PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
>   
>   			/* Read the smps mode for later use. */
> -			addr = palmas_regs_info[id].ctrl_addr;
> +			addr = ddata->palmas_regs_info[id].ctrl_addr;
>   			ret = palmas_smps_read(pmic->palmas, addr, &reg);
>   			if (ret)
>   				return ret;
> @@ -1223,7 +1223,7 @@ static int palmas_smps_registration(struct palmas_pmic *pmic,
>   
>   			pmic->desc[id].enable_reg =
>   					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
> -						palmas_regs_info[id].ctrl_addr);
> +						ddata->palmas_regs_info[id].ctrl_addr);
>   			pmic->desc[id].enable_mask =
>   					PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
>   			/* set_mode overrides this value */
> @@ -1319,7 +1319,7 @@ static int tps65917_smps_registration(struct palmas_pmic *pmic,
>   		pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
>   		pmic->desc[id].vsel_reg =
>   				PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
> -						   tps65917_regs_info[id].vsel_addr);
> +					        ddata->palmas_regs_info[id].vsel_addr);
>   		pmic->desc[id].vsel_mask =
>   				PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
>   
> @@ -1414,7 +1414,7 @@ struct palmas_pmic_driver_data palmas_ddata = {
>   	.ldo_begin = PALMAS_REG_LDO1,
>   	.ldo_end = PALMAS_REG_LDOUSB,
>   	.max_reg = PALMAS_NUM_REGS,
> -	.palmas_regs_info = palmas_regs_info,
> +	.palmas_regs_info = palmas_generic_regs_info,
>   	.palmas_matches = palmas_matches,
>   	.sleep_req_info = palma_sleep_req_info,
>   	.smps_register = palmas_smps_registration,

Regards,
Keerthy

      reply	other threads:[~2014-06-30  5:12 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-26 18:31 [PATCH] regulator: tps65917: Fix SMPS enable/disable/is_enable Nishanth Menon
2014-06-27  9:18 ` Keerthy
2014-06-27 17:15   ` Nishanth Menon
2014-06-30  5:11     ` Keerthy [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53B0F168.7050709@ti.com \
    --to=a0393675@ti.com \
    --cc=broonie@kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).