From: Helge Deller <deller@gmx.de>
To: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Eric Paris <eparis@redhat.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
linux-parisc@vger.kernel.org,
James Bottomley <James.Bottomley@HansenPartnership.com>
Subject: Re: [PATCH] fix fanotify_mark() breakage on big endian 32bit kernel
Date: Fri, 04 Jul 2014 19:03:32 +0200 [thread overview]
Message-ID: <53B6DE64.4000706@gmx.de> (raw)
In-Reply-To: <53B6DAE1.1040709@gmx.de>
Hi Heinrich,
On 07/04/2014 06:48 PM, Heinrich Schuchardt wrote:
> On 04.07.2014 17:12, Helge Deller wrote:
>> This patch affects big endian architectures only.
>>
>> On those with 32bit userspace and 64bit kernel (CONFIG_COMPAT=y) the
>> 64bit mask parameter is correctly constructed out of two 32bit values in
>> the compat_fanotify_mark() function and then passed as 64bit parameter
>> to the fanotify_mark() syscall.
>>
>> But for the CONFIG_COMPAT=n case (32bit kernel & userspace),
>> compat_fanotify_mark() isn't used and the fanotify_mark syscall implementation
>
> I was not able to find a symbol compat_fanotify_mark. Could you, please, indicate were this coding is.
fs/notify/fanotify/fanotify_user.c around line 892:
#ifdef CONFIG_COMPAT
COMPAT_SYSCALL_DEFINE6(fanotify_mark,
int, fanotify_fd, unsigned int, flags,
__u32, mask0, __u32, mask1, int, dfd,
const char __user *, pathname)
>> is used directly. In that case the upper and lower 32 bits of the 64bit mask
>> parameter is still swapped on big endian machines and thus leads to
>> fanotify_mark failing with -EINVAL.
>>
>> Here is a strace of the same 32bit executable (fanotify01 testcase from LTP):
>
> https://github.com/linux-test-project/ltp
> testcases/kernel/syscalls/fanotify/fanotify01.c
> I guess.
Yes.
>> On a 64bit kernel it suceeds:
>> syscall_322(0, 0, 0x3, 0x3, 0x266c8, 0x1) = 0x3
>> syscall_323(0x3, 0x1, 0, 0x3b, 0xffffff9c, 0x266c8) = 0
>>
>> On a 32bit kernel it fails:
>> syscall_322(0, 0, 0x3, 0x3, 0x266c8, 0x1) = 0x3
>> syscall_323(0x3, 0x1, 0, 0x3b, 0xffffff9c, 0x266c8) = -1 (errno 22)
>
> The syscall numbers are architecture specific.
> Which architecture did you test on?
Yes, the numbers are architecture specifc.
I tested on HP-PARISC (parisc arch) with 32- and 64bit kernel.
>> Below is the easiest fix for this problem by simply swapping the upper and
>> lower 32bit of the 64 bit mask parameter when building a pure 32bit kernel.
>
> The problem you report is architecture specific.
It affects all *big endian* architectures (parisc, s390, ppc, ...)
So, if people could test it with a 32bit kernel on those other architectures
it would be nice.
> Is fanotify_user.c really the right place for the correction?
> Or should the fix be in the "arch" directory?
I don't think the fix should go in the arch architectures, because
then you have to modify it for each big endian arch.
>> But on the other side, using __u64 in a syscall API is IMHO wrong. This may
>> easily break 32bit kernel builds, esp. on big endian machines.
>>
>> The clean solution would probably be to use SYSCALL_DEFINE5() when
>> building a 64bit-kernel, and SYSCALL_DEFINE6() for fanotify_mark() when
>> building a pure 32bit kernel, something like this:
Again, I think using __u64 as type for a generic syscall is wrong, esp.
if the same code is compiled for 32- and 64bit.
This is my (uncomplete!) suggestion, but it would add many more lines and
makes reading the code more complicated.
>> #ifdef CONFIG_64BIT
>> SYSCALL_DEFINE5(fanotify_mark, int, fanotify_fd, unsigned int, flags,
>> __u64, mask, int, dfd,
>> const char __user *, pathname)
>> #else
>> SYSCALL_DEFINE6(fanotify_mark, int, fanotify_fd, unsigned int, flags,
>> __u32, mask0, __u32, mask1, int, dfd,
>> const char __user *, pathname)
>> #endif
>>
>>
>> Signed-off-by: Helge Deller <deller@gmx.de>
>> To: Eric Paris <eparis@redhat.com>
>> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
>> Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
>>
>>
>> diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
>> index 3fdc8a3..374261c 100644
>> --- a/fs/notify/fanotify/fanotify_user.c
>> +++ b/fs/notify/fanotify/fanotify_user.c
>> @@ -787,6 +787,10 @@ SYSCALL_DEFINE5(fanotify_mark, int, fanotify_fd, unsigned int, flags,
>> struct path path;
>> int ret;
>>
>> +#if defined(__BIG_ENDIAN) && !defined(CONFIG_64BIT)
>> + mask = (mask << 32) | (mask >> 32);
>> +#endif
>> +
>> pr_debug("%s: fanotify_fd=%d flags=%x dfd=%d pathname=%p mask=%llx\n",
>> __func__, fanotify_fd, flags, dfd, pathname, mask);
>>
next prev parent reply other threads:[~2014-07-04 17:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 15:12 [PATCH] fix fanotify_mark() breakage on big endian 32bit kernel Helge Deller
2014-07-04 16:48 ` Heinrich Schuchardt
2014-07-04 17:03 ` Helge Deller [this message]
2014-07-06 9:15 ` Heiko Carstens
2014-07-06 15:08 ` John David Anglin
2014-07-07 13:54 ` Aw: " Helge Deller
2014-07-07 15:28 ` Heiko Carstens
2014-07-11 8:00 ` [PATCH] fix fanotify_mark() breakage on big endian 32bit kernel [SOLVED] Helge Deller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53B6DE64.4000706@gmx.de \
--to=deller@gmx.de \
--cc=James.Bottomley@HansenPartnership.com \
--cc=eparis@redhat.com \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-parisc@vger.kernel.org \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox