From: Chai Wen <chaiw.fnst@cn.fujitsu.com>
To: <mingo@redhat.com>, Don Zickus <dzickus@redhat.com>
Cc: chai wen <chaiw.fnst@cn.fujitsu.com>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] softlockup: make detector be aware of task switch of processes hogging cpu
Date: Fri, 22 Aug 2014 09:12:29 +0800 [thread overview]
Message-ID: <53F698FD.6030409@cn.fujitsu.com> (raw)
In-Reply-To: <1408599742-21674-1-git-send-email-chaiw.fnst@cn.fujitsu.com>
On 08/21/2014 01:42 PM, chai wen wrote:
> For now, soft lockup detector warns once for each case of process softlockup.
> But the thread 'watchdog/n' may not always get the cpu at the time slot between
> the task switch of two processes hogging that cpu to reset soft_watchdog_warn.
>
> An example would be two processes hogging the cpu. Process A causes the
> softlockup warning and is killed manually by a user. Process B immediately
> becomes the new process hogging the cpu preventing the softlockup code from
> resetting the soft_watchdog_warn variable.
>
> This case is a false negative of "warn only once for a process", as there may
> be a different process that is going to hog the cpu. Resolve this by
> saving/checking the task pointer of the hogging process and use that to reset
> soft_watchdog_warn too.
>
> Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
> Signed-off-by: Don Zickus <dzickus@redhat.com>
Hi Ingo & Don
Ping...
This patch is using the task pointer to check cases that softlockup can
not reset itself, and has been tested.
thanks
chai wen
> ---
> kernel/watchdog.c | 16 +++++++++++++++-
> 1 files changed, 15 insertions(+), 1 deletions(-)
>
> diff --git a/kernel/watchdog.c b/kernel/watchdog.c
> index 0037db6..2e55620 100644
> --- a/kernel/watchdog.c
> +++ b/kernel/watchdog.c
> @@ -42,6 +42,7 @@ static DEFINE_PER_CPU(bool, softlockup_touch_sync);
> static DEFINE_PER_CPU(bool, soft_watchdog_warn);
> static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
> static DEFINE_PER_CPU(unsigned long, soft_lockup_hrtimer_cnt);
> +static DEFINE_PER_CPU(struct task_struct *, softlockup_task_ptr_saved);
> #ifdef CONFIG_HARDLOCKUP_DETECTOR
> static DEFINE_PER_CPU(bool, hard_watchdog_warn);
> static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
> @@ -328,8 +329,20 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
> return HRTIMER_RESTART;
>
> /* only warn once */
> - if (__this_cpu_read(soft_watchdog_warn) == true)
> + if (__this_cpu_read(soft_watchdog_warn) == true) {
> + /*
> + * Handle the case where multiple processes are
> + * causing softlockups but the duration is small
> + * enough, the softlockup detector can not reset
> + * itself in time. Use task pointers to detect this.
> + */
> + if (__this_cpu_read(softlockup_task_ptr_saved) !=
> + current) {
> + __this_cpu_write(soft_watchdog_warn, false);
> + __touch_watchdog();
> + }
> return HRTIMER_RESTART;
> + }
>
> if (softlockup_all_cpu_backtrace) {
> /* Prevent multiple soft-lockup reports if one cpu is already
> @@ -345,6 +358,7 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
> pr_emerg("BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
> smp_processor_id(), duration,
> current->comm, task_pid_nr(current));
> + __this_cpu_write(softlockup_task_ptr_saved, current);
> print_modules();
> print_irqtrace_events(current);
> if (regs)
--
Regards
Chai Wen
next prev parent reply other threads:[~2014-08-22 1:15 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 14:49 [PATCH 0/5] watchdog: various fixes Don Zickus
2014-08-11 14:49 ` [PATCH 1/5] watchdog: remove unnecessary head files Don Zickus
2014-08-18 18:03 ` [tip:perf/watchdog] watchdog: Remove unnecessary header files tip-bot for chai wen
2014-08-11 14:49 ` [PATCH 2/5] softlockup: make detector be aware of task switch of processes hogging cpu Don Zickus
2014-08-18 9:03 ` Ingo Molnar
2014-08-18 15:06 ` Don Zickus
2014-08-18 18:01 ` Ingo Molnar
2014-08-18 18:43 ` Don Zickus
2014-08-18 19:02 ` Ingo Molnar
2014-08-18 20:38 ` Don Zickus
2014-08-19 1:36 ` Chai Wen
2014-08-21 1:37 ` Chai Wen
2014-08-21 2:30 ` Don Zickus
2014-08-21 5:42 ` [PATCH] " chai wen
2014-08-22 1:12 ` Chai Wen [this message]
2014-08-22 1:58 ` Don Zickus
2014-08-26 12:51 ` Chai Wen
2014-08-26 14:22 ` Don Zickus
2014-08-27 1:33 ` Chai Wen
2014-08-11 14:49 ` [PATCH 3/5] watchdog: fix print-once on enable Don Zickus
2014-08-18 9:05 ` Ingo Molnar
2014-08-18 9:07 ` Ingo Molnar
2014-08-18 15:07 ` Don Zickus
2014-08-18 18:03 ` [tip:perf/watchdog] watchdog: Fix " tip-bot for Ulrich Obergfell
2014-08-11 14:49 ` [PATCH 4/5] watchdog: control hard lockup detection default Don Zickus
2014-08-18 9:12 ` Ingo Molnar
2014-08-18 15:07 ` Don Zickus
2014-08-18 9:16 ` Ingo Molnar
2014-08-18 10:44 ` Ulrich Obergfell
2014-08-18 15:17 ` Don Zickus
2014-08-18 18:07 ` Ingo Molnar
2014-08-18 18:53 ` Don Zickus
2014-08-18 19:00 ` Ingo Molnar
2014-08-11 14:49 ` [PATCH 5/5] kvm: ensure hard lockup detection is disabled by default Don Zickus
-- strict thread matches above, loose matches on Subject: below --
2014-08-28 4:52 [PATCH] softlockup: Make detector be aware of task switch of processes hogging cpu Don Zickus
2014-08-28 23:07 ` Andrew Morton
2014-08-29 1:27 ` Don Zickus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F698FD.6030409@cn.fujitsu.com \
--to=chaiw.fnst@cn.fujitsu.com \
--cc=dzickus@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).