Re: [PATCH] regulator: Proofread documentation

[Randy Dunlap <rdunlap@infradead.org>]

On 08/25/14 01:47, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/power/regulator/consumer.txt  | 7 ++++---
>  Documentation/power/regulator/design.txt    | 8 ++++----
>  Documentation/power/regulator/machine.txt   | 4 ++--
>  Documentation/power/regulator/overview.txt  | 6 +++---
>  Documentation/power/regulator/regulator.txt | 6 +++---
>  5 files changed, 16 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
> index 81c0e2b49cd8..8afb236ca765 100644
> --- a/Documentation/power/regulator/consumer.txt
> +++ b/Documentation/power/regulator/consumer.txt
> @@ -143,8 +143,9 @@ This will cause the core to recalculate the total load on the regulator (based
>  on all its consumers) and change operating mode (if necessary and permitted)
>  to best match the current operating load.
>  
> -The load_uA value can be determined from the consumers datasheet. e.g.most
> -datasheets have tables showing the max current consumed in certain situations.
> +The load_uA value can be determined from the consumer's datasheet. e.g. most

Prefer:                                                               E.g.

otherwise,
Acked-by: Randy Dunlap <rdunlap@infradead.org>

Thanks.

> +datasheets have tables showing the maximum current consumed in certain
> +situations.
>  
>  Most consumers will use indirect operating mode control since they have no
>  knowledge of the regulator or whether the regulator is shared with other


-- 
~Randy