Re: [PATCH v2] extcon: max77693: Fix a bug occured at changing ADC debounce time.

[Chanwoo Choi <cw00.choi@samsung.com>]

Hi Jonghwa,

On 09/03/2014 03:47 PM, Jonghwa Lee wrote:
> When it writes some value other than 0 to BTLDset and JIGset, muic device
> will be reset automatically. And it happens during updating ADC debounce time,
> because it shares same register. To update ADC debounce time without reset,
> set value only to ADCDbset and 0 to BTLDset and JIGset.
> 
> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> ---
> Changes in v2
>  - Fix comments.
> 
>  drivers/extcon/extcon-max77693.c |   11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
> index 77460f2..171f35a 100644
> --- a/drivers/extcon/extcon-max77693.c
> +++ b/drivers/extcon/extcon-max77693.c
> @@ -255,10 +255,15 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
>  	case ADC_DEBOUNCE_TIME_10MS:
>  	case ADC_DEBOUNCE_TIME_25MS:
>  	case ADC_DEBOUNCE_TIME_38_62MS:
> -		ret = regmap_update_bits(info->max77693->regmap_muic,
> +		/*
> +		 * Don't touch BTLDset, JIGset when you want to change adc
> +		 * debounce time. If it writes other than 0 to BTLDset, JIGset
> +		 * muic device will be reset and loose current state.
> +		 */
> +		ret = regmap_write_bits(info->max77693->regmap_muic,

regmap_write_bits() is wrong. You have to use regmap_write().

>  					  MAX77693_MUIC_REG_CTRL3,
> -					  CONTROL3_ADCDBSET_MASK,
> -					  time << CONTROL3_ADCDBSET_SHIFT);
> +					  (CONTROL3_ADCDBSET_MASK &
> +					  time << CONTROL3_ADCDBSET_SHIFT));

I think you don't need to mask with CONTROL3_ADCDBSET_MASK.
You can just write following statement wihtout masking operation
because of using regmap_write() function.

		ret = regmap_write(info->max77693->regmap_muic,			
  				  MAX77693_MUIC_REG_CTRL3,
				  time << CONTROL3_ADCDBSET_SHIFT);

Thanks,
Chanwoo Choi