* [PATCH v7] iio: Add Dyna-Image AL3320A ambient light sensor driver
@ 2014-09-10 6:57 Daniel Baluta
2014-09-10 17:57 ` Hartmut Knaack
0 siblings, 1 reply; 4+ messages in thread
From: Daniel Baluta @ 2014-09-10 6:57 UTC (permalink / raw)
To: jic23; +Cc: daniel.baluta, knaack.h, linux-iio, pmeerw, linux-kernel,
Tsechih_Lin
Minimal implementation. This driver provides raw illuminance readings.
This is based on drivers/hwmon/al3320.c (*) driver from msm tree written
by Tsechih Lin <Tsechih_Lin@asus.com>
* https://android.googlesource.com/kernel/msm.git
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
---
Changes since v6: (reported by Hartmut)
* drop variable i and reuse ret
Changes since v5: (reported by Hartmut)
* fix comments for al3320a_range
* make sure we always use a valid index in al3320a_scales
Changes since v4: (reported by Peter)
* no need to fix endianess when reading raw value
Changes since v3: (reported by Hartmut and Jonathan)
* dropped the local store for the range, instead read it when necessary
* removed wrapper functions
* added in_illuminance_scale_available attribute
* fix bug when reading raw value, use i2c_smbus_read_word instead of
i2c_smbus_read_word_swapped and fix the endianess after read.
* small coding style fixes
Changes since v2: (reported by Peter Meerwald)
* removed definition of DATA_HIGH and SW_RESET as they are not used
* added a comment to al3320a_get_adc_value() function
* added thresholds on TODO list
* small style fixes
Changes since v1: (reported by Peter Meerwald)
* used u8 instead of int for passing gain and mean_time
* used i2c_smbus_read_word_swapped instead of 2 x i2c_smbus_read_byte_data
* used devm_iio_device_register instead of iio_device_register
* small style fixes
drivers/iio/light/Kconfig | 10 ++
drivers/iio/light/Makefile | 1 +
drivers/iio/light/al3320a.c | 232 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 243 insertions(+)
create mode 100644 drivers/iio/light/al3320a.c
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index bf05ca5..5bea821 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -17,6 +17,16 @@ config ADJD_S311
This driver can also be built as a module. If so, the module
will be called adjd_s311.
+config AL3320A
+ tristate "AL3320A ambient light sensor"
+ depends on I2C
+ help
+ Say Y here if you want to build a driver for the Dyna Image AL3320A
+ ambient light sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called al3320a.
+
config APDS9300
tristate "APDS9300 ambient light sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 8b8c09f..47877a3 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -4,6 +4,7 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_ADJD_S311) += adjd_s311.o
+obj-$(CONFIG_AL3320A) += al3320a.o
obj-$(CONFIG_APDS9300) += apds9300.o
obj-$(CONFIG_CM32181) += cm32181.o
obj-$(CONFIG_CM36651) += cm36651.o
diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
new file mode 100644
index 0000000..6aac651
--- /dev/null
+++ b/drivers/iio/light/al3320a.c
@@ -0,0 +1,232 @@
+/*
+ * AL3320A - Dyna Image Ambient Light Sensor
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
+ *
+ * TODO: interrupt support, thresholds
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define AL3320A_DRV_NAME "al3320a"
+
+#define AL3320A_REG_CONFIG 0x00
+#define AL3320A_REG_STATUS 0x01
+#define AL3320A_REG_INT 0x02
+#define AL3320A_REG_WAIT 0x06
+#define AL3320A_REG_CONFIG_RANGE 0x07
+#define AL3320A_REG_PERSIST 0x08
+#define AL3320A_REG_MEAN_TIME 0x09
+#define AL3320A_REG_ADUMMY 0x0A
+#define AL3320A_REG_DATA_LOW 0x22
+
+#define AL3320A_REG_LOW_THRESH_LOW 0x30
+#define AL3320A_REG_LOW_THRESH_HIGH 0x31
+#define AL3320A_REG_HIGH_THRESH_LOW 0x32
+#define AL3320A_REG_HIGH_THRESH_HIGH 0x33
+
+#define AL3320A_CONFIG_DISABLE 0x00
+#define AL3320A_CONFIG_ENABLE 0x01
+
+#define AL3320A_GAIN_SHIFT 1
+#define AL3320A_GAIN_MASK (BIT(2) | BIT(1))
+
+/* chip params default values */
+#define AL3320A_DEFAULT_MEAN_TIME 4
+#define AL3320A_DEFAULT_WAIT_TIME 0 /* no waiting */
+
+#define AL3320A_SCALE_AVAILABLE "0.512 0.128 0.032 0.01"
+
+enum al3320a_range {
+ AL3320A_RANGE_1, /* 33.28 Klx */
+ AL3320A_RANGE_2, /* 8.32 Klx */
+ AL3320A_RANGE_3, /* 2.08 Klx */
+ AL3320A_RANGE_4 /* 0.65 Klx */
+};
+
+static const int al3320a_scales[][2] = {
+ {0, 512000}, {0, 128000}, {0, 32000}, {0, 10000}
+};
+
+struct al3320a_data {
+ struct i2c_client *client;
+};
+
+static const struct iio_chan_spec al3320a_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ }
+};
+
+static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE);
+
+static struct attribute *al3320a_attributes[] = {
+ &iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group al3320a_attribute_group = {
+ .attrs = al3320a_attributes,
+};
+
+static int al3320a_init(struct al3320a_data *data)
+{
+ int ret;
+
+ /* power on */
+ ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG,
+ AL3320A_CONFIG_ENABLE);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE,
+ AL3320A_RANGE_3 << AL3320A_GAIN_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME,
+ AL3320A_DEFAULT_MEAN_TIME);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT,
+ AL3320A_DEFAULT_WAIT_TIME);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int al3320a_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct al3320a_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ /*
+ * ALS ADC value is stored in two adjacent registers:
+ * - low byte of output is stored at AL3320A_REG_DATA_LOW
+ * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
+ */
+ ret = i2c_smbus_read_word_data(data->client,
+ AL3320A_REG_DATA_LOW);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ ret = i2c_smbus_read_byte_data(data->client,
+ AL3320A_REG_CONFIG_RANGE);
+ if (ret < 0)
+ return ret;
+
+ ret = (ret & AL3320A_GAIN_MASK) >> AL3320A_GAIN_SHIFT;
+ *val = al3320a_scales[ret][0];
+ *val2 = al3320a_scales[ret][1];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+ return -EINVAL;
+}
+
+static int al3320a_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct al3320a_data *data = iio_priv(indio_dev);
+ int i;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
+ if (val == al3320a_scales[i][0] &&
+ val2 == al3320a_scales[i][1])
+ return i2c_smbus_write_byte_data(data->client,
+ AL3320A_REG_CONFIG_RANGE,
+ i << AL3320A_GAIN_SHIFT);
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
+static const struct iio_info al3320a_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = al3320a_read_raw,
+ .write_raw = al3320a_write_raw,
+ .attrs = &al3320a_attribute_group,
+};
+
+static int al3320a_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct al3320a_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &al3320a_info;
+ indio_dev->name = AL3320A_DRV_NAME;
+ indio_dev->channels = al3320a_channels;
+ indio_dev->num_channels = ARRAY_SIZE(al3320a_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = al3320a_init(data);
+ if (ret < 0) {
+ dev_err(&client->dev, "al3320a chip init failed\n");
+ return ret;
+ }
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int al3320a_remove(struct i2c_client *client)
+{
+ return i2c_smbus_write_byte_data(client, AL3320A_REG_CONFIG,
+ AL3320A_CONFIG_DISABLE);
+}
+
+static const struct i2c_device_id al3320a_id[] = {
+ {"al3320a", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, al3320a_id);
+
+static struct i2c_driver al3320a_driver = {
+ .driver = {
+ .name = AL3320A_DRV_NAME,
+ },
+ .probe = al3320a_probe,
+ .remove = al3320a_remove,
+ .id_table = al3320a_id,
+};
+
+module_i2c_driver(al3320a_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v7] iio: Add Dyna-Image AL3320A ambient light sensor driver
2014-09-10 6:57 [PATCH v7] iio: Add Dyna-Image AL3320A ambient light sensor driver Daniel Baluta
@ 2014-09-10 17:57 ` Hartmut Knaack
2014-09-10 19:28 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Hartmut Knaack @ 2014-09-10 17:57 UTC (permalink / raw)
To: Daniel Baluta, jic23; +Cc: linux-iio, pmeerw, linux-kernel, Tsechih_Lin
Daniel Baluta schrieb, Am 10.09.2014 08:57:
> Minimal implementation. This driver provides raw illuminance readings.
>
> This is based on drivers/hwmon/al3320.c (*) driver from msm tree written
> by Tsechih Lin <Tsechih_Lin@asus.com>
>
> * https://android.googlesource.com/kernel/msm.git
>
> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
> ---
> Changes since v6: (reported by Hartmut)
> * drop variable i and reuse ret
>
> Changes since v5: (reported by Hartmut)
> * fix comments for al3320a_range
> * make sure we always use a valid index in al3320a_scales
>
> Changes since v4: (reported by Peter)
> * no need to fix endianess when reading raw value
>
> Changes since v3: (reported by Hartmut and Jonathan)
> * dropped the local store for the range, instead read it when necessary
> * removed wrapper functions
> * added in_illuminance_scale_available attribute
> * fix bug when reading raw value, use i2c_smbus_read_word instead of
> i2c_smbus_read_word_swapped and fix the endianess after read.
> * small coding style fixes
>
> Changes since v2: (reported by Peter Meerwald)
> * removed definition of DATA_HIGH and SW_RESET as they are not used
> * added a comment to al3320a_get_adc_value() function
> * added thresholds on TODO list
> * small style fixes
>
> Changes since v1: (reported by Peter Meerwald)
> * used u8 instead of int for passing gain and mean_time
> * used i2c_smbus_read_word_swapped instead of 2 x i2c_smbus_read_byte_data
> * used devm_iio_device_register instead of iio_device_register
> * small style fixes
> drivers/iio/light/Kconfig | 10 ++
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/al3320a.c | 232 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 243 insertions(+)
> create mode 100644 drivers/iio/light/al3320a.c
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index bf05ca5..5bea821 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -17,6 +17,16 @@ config ADJD_S311
> This driver can also be built as a module. If so, the module
> will be called adjd_s311.
>
> +config AL3320A
> + tristate "AL3320A ambient light sensor"
> + depends on I2C
> + help
> + Say Y here if you want to build a driver for the Dyna Image AL3320A
> + ambient light sensor.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called al3320a.
> +
> config APDS9300
> tristate "APDS9300 ambient light sensor"
> depends on I2C
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 8b8c09f..47877a3 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -4,6 +4,7 @@
>
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_ADJD_S311) += adjd_s311.o
> +obj-$(CONFIG_AL3320A) += al3320a.o
> obj-$(CONFIG_APDS9300) += apds9300.o
> obj-$(CONFIG_CM32181) += cm32181.o
> obj-$(CONFIG_CM36651) += cm36651.o
> diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
> new file mode 100644
> index 0000000..6aac651
> --- /dev/null
> +++ b/drivers/iio/light/al3320a.c
> @@ -0,0 +1,232 @@
> +/*
> + * AL3320A - Dyna Image Ambient Light Sensor
> + *
> + * Copyright (c) 2014, Intel Corporation.
> + *
> + * This file is subject to the terms and conditions of version 2 of
> + * the GNU General Public License. See the file COPYING in the main
> + * directory of this archive for more details.
> + *
> + * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
> + *
> + * TODO: interrupt support, thresholds
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define AL3320A_DRV_NAME "al3320a"
> +
> +#define AL3320A_REG_CONFIG 0x00
> +#define AL3320A_REG_STATUS 0x01
> +#define AL3320A_REG_INT 0x02
> +#define AL3320A_REG_WAIT 0x06
> +#define AL3320A_REG_CONFIG_RANGE 0x07
> +#define AL3320A_REG_PERSIST 0x08
> +#define AL3320A_REG_MEAN_TIME 0x09
> +#define AL3320A_REG_ADUMMY 0x0A
> +#define AL3320A_REG_DATA_LOW 0x22
> +
> +#define AL3320A_REG_LOW_THRESH_LOW 0x30
> +#define AL3320A_REG_LOW_THRESH_HIGH 0x31
> +#define AL3320A_REG_HIGH_THRESH_LOW 0x32
> +#define AL3320A_REG_HIGH_THRESH_HIGH 0x33
> +
> +#define AL3320A_CONFIG_DISABLE 0x00
> +#define AL3320A_CONFIG_ENABLE 0x01
> +
> +#define AL3320A_GAIN_SHIFT 1
> +#define AL3320A_GAIN_MASK (BIT(2) | BIT(1))
> +
> +/* chip params default values */
> +#define AL3320A_DEFAULT_MEAN_TIME 4
> +#define AL3320A_DEFAULT_WAIT_TIME 0 /* no waiting */
> +
> +#define AL3320A_SCALE_AVAILABLE "0.512 0.128 0.032 0.01"
> +
> +enum al3320a_range {
> + AL3320A_RANGE_1, /* 33.28 Klx */
> + AL3320A_RANGE_2, /* 8.32 Klx */
> + AL3320A_RANGE_3, /* 2.08 Klx */
> + AL3320A_RANGE_4 /* 0.65 Klx */
> +};
> +
> +static const int al3320a_scales[][2] = {
> + {0, 512000}, {0, 128000}, {0, 32000}, {0, 10000}
> +};
> +
> +struct al3320a_data {
> + struct i2c_client *client;
> +};
> +
> +static const struct iio_chan_spec al3320a_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE),
> + }
> +};
> +
> +static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE);
> +
> +static struct attribute *al3320a_attributes[] = {
> + &iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group al3320a_attribute_group = {
> + .attrs = al3320a_attributes,
> +};
> +
> +static int al3320a_init(struct al3320a_data *data)
> +{
> + int ret;
> +
> + /* power on */
> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG,
> + AL3320A_CONFIG_ENABLE);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE,
> + AL3320A_RANGE_3 << AL3320A_GAIN_SHIFT);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME,
> + AL3320A_DEFAULT_MEAN_TIME);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT,
> + AL3320A_DEFAULT_WAIT_TIME);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int al3320a_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + struct al3320a_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + /*
> + * ALS ADC value is stored in two adjacent registers:
> + * - low byte of output is stored at AL3320A_REG_DATA_LOW
> + * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
> + */
> + ret = i2c_smbus_read_word_data(data->client,
> + AL3320A_REG_DATA_LOW);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + ret = i2c_smbus_read_byte_data(data->client,
> + AL3320A_REG_CONFIG_RANGE);
> + if (ret < 0)
> + return ret;
> +
> + ret = (ret & AL3320A_GAIN_MASK) >> AL3320A_GAIN_SHIFT;
> + *val = al3320a_scales[ret][0];
> + *val2 = al3320a_scales[ret][1];
> +
> + return IIO_VAL_INT_PLUS_MICRO;
> + }
> + return -EINVAL;
> +}
> +
> +static int al3320a_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val,
> + int val2, long mask)
> +{
> + struct al3320a_data *data = iio_priv(indio_dev);
> + int i;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SCALE:
> + for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
> + if (val == al3320a_scales[i][0] &&
> + val2 == al3320a_scales[i][1])
> + return i2c_smbus_write_byte_data(data->client,
> + AL3320A_REG_CONFIG_RANGE,
> + i << AL3320A_GAIN_SHIFT);
> + }
> + break;
> + }
> + return -EINVAL;
> +}
> +
> +static const struct iio_info al3320a_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = al3320a_read_raw,
> + .write_raw = al3320a_write_raw,
> + .attrs = &al3320a_attribute_group,
> +};
> +
> +static int al3320a_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct al3320a_data *data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->info = &al3320a_info;
> + indio_dev->name = AL3320A_DRV_NAME;
> + indio_dev->channels = al3320a_channels;
> + indio_dev->num_channels = ARRAY_SIZE(al3320a_channels);
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = al3320a_init(data);
> + if (ret < 0) {
> + dev_err(&client->dev, "al3320a chip init failed\n");
> + return ret;
> + }
> + return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static int al3320a_remove(struct i2c_client *client)
> +{
> + return i2c_smbus_write_byte_data(client, AL3320A_REG_CONFIG,
> + AL3320A_CONFIG_DISABLE);
> +}
> +
> +static const struct i2c_device_id al3320a_id[] = {
> + {"al3320a", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, al3320a_id);
> +
> +static struct i2c_driver al3320a_driver = {
> + .driver = {
> + .name = AL3320A_DRV_NAME,
> + },
> + .probe = al3320a_probe,
> + .remove = al3320a_remove,
> + .id_table = al3320a_id,
> +};
> +
> +module_i2c_driver(al3320a_driver);
> +
> +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
> +MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
> +MODULE_LICENSE("GPL v2");
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v7] iio: Add Dyna-Image AL3320A ambient light sensor driver
2014-09-10 17:57 ` Hartmut Knaack
@ 2014-09-10 19:28 ` Jonathan Cameron
2014-09-10 19:36 ` Daniel Baluta
0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Cameron @ 2014-09-10 19:28 UTC (permalink / raw)
To: Hartmut Knaack, Daniel Baluta
Cc: linux-iio, pmeerw, linux-kernel, Tsechih_Lin
On 10/09/14 18:57, Hartmut Knaack wrote:
> Daniel Baluta schrieb, Am 10.09.2014 08:57:
>> Minimal implementation. This driver provides raw illuminance readings.
>>
>> This is based on drivers/hwmon/al3320.c (*) driver from msm tree written
>> by Tsechih Lin <Tsechih_Lin@asus.com>
>>
>> * https://android.googlesource.com/kernel/msm.git
>>
>> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Thanks Daniel.
Also thanks to Hartmut for reviewing stamina.
I've been effectively offline for a 10 days (some of it spent in a fridge)
so am even more grateful to those who help with reviewing than normal.
Applied to the togreg branch of iio.git which I will push out as testing
for the autobuilders to play when not in an airport departure lounge on the
30 mins of free airport wifi. What fun.
I wonder if this will send?
>> ---
>> Changes since v6: (reported by Hartmut)
>> * drop variable i and reuse ret
>>
>> Changes since v5: (reported by Hartmut)
>> * fix comments for al3320a_range
>> * make sure we always use a valid index in al3320a_scales
>>
>> Changes since v4: (reported by Peter)
>> * no need to fix endianess when reading raw value
>>
>> Changes since v3: (reported by Hartmut and Jonathan)
>> * dropped the local store for the range, instead read it when necessary
>> * removed wrapper functions
>> * added in_illuminance_scale_available attribute
>> * fix bug when reading raw value, use i2c_smbus_read_word instead of
>> i2c_smbus_read_word_swapped and fix the endianess after read.
>> * small coding style fixes
>>
>> Changes since v2: (reported by Peter Meerwald)
>> * removed definition of DATA_HIGH and SW_RESET as they are not used
>> * added a comment to al3320a_get_adc_value() function
>> * added thresholds on TODO list
>> * small style fixes
>>
>> Changes since v1: (reported by Peter Meerwald)
>> * used u8 instead of int for passing gain and mean_time
>> * used i2c_smbus_read_word_swapped instead of 2 x i2c_smbus_read_byte_data
>> * used devm_iio_device_register instead of iio_device_register
>> * small style fixes
>> drivers/iio/light/Kconfig | 10 ++
>> drivers/iio/light/Makefile | 1 +
>> drivers/iio/light/al3320a.c | 232 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 243 insertions(+)
>> create mode 100644 drivers/iio/light/al3320a.c
>>
>> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
>> index bf05ca5..5bea821 100644
>> --- a/drivers/iio/light/Kconfig
>> +++ b/drivers/iio/light/Kconfig
>> @@ -17,6 +17,16 @@ config ADJD_S311
>> This driver can also be built as a module. If so, the module
>> will be called adjd_s311.
>>
>> +config AL3320A
>> + tristate "AL3320A ambient light sensor"
>> + depends on I2C
>> + help
>> + Say Y here if you want to build a driver for the Dyna Image AL3320A
>> + ambient light sensor.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called al3320a.
>> +
>> config APDS9300
>> tristate "APDS9300 ambient light sensor"
>> depends on I2C
>> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
>> index 8b8c09f..47877a3 100644
>> --- a/drivers/iio/light/Makefile
>> +++ b/drivers/iio/light/Makefile
>> @@ -4,6 +4,7 @@
>>
>> # When adding new entries keep the list in alphabetical order
>> obj-$(CONFIG_ADJD_S311) += adjd_s311.o
>> +obj-$(CONFIG_AL3320A) += al3320a.o
>> obj-$(CONFIG_APDS9300) += apds9300.o
>> obj-$(CONFIG_CM32181) += cm32181.o
>> obj-$(CONFIG_CM36651) += cm36651.o
>> diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
>> new file mode 100644
>> index 0000000..6aac651
>> --- /dev/null
>> +++ b/drivers/iio/light/al3320a.c
>> @@ -0,0 +1,232 @@
>> +/*
>> + * AL3320A - Dyna Image Ambient Light Sensor
>> + *
>> + * Copyright (c) 2014, Intel Corporation.
>> + *
>> + * This file is subject to the terms and conditions of version 2 of
>> + * the GNU General Public License. See the file COPYING in the main
>> + * directory of this archive for more details.
>> + *
>> + * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
>> + *
>> + * TODO: interrupt support, thresholds
>> + *
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/i2c.h>
>> +
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/sysfs.h>
>> +
>> +#define AL3320A_DRV_NAME "al3320a"
>> +
>> +#define AL3320A_REG_CONFIG 0x00
>> +#define AL3320A_REG_STATUS 0x01
>> +#define AL3320A_REG_INT 0x02
>> +#define AL3320A_REG_WAIT 0x06
>> +#define AL3320A_REG_CONFIG_RANGE 0x07
>> +#define AL3320A_REG_PERSIST 0x08
>> +#define AL3320A_REG_MEAN_TIME 0x09
>> +#define AL3320A_REG_ADUMMY 0x0A
>> +#define AL3320A_REG_DATA_LOW 0x22
>> +
>> +#define AL3320A_REG_LOW_THRESH_LOW 0x30
>> +#define AL3320A_REG_LOW_THRESH_HIGH 0x31
>> +#define AL3320A_REG_HIGH_THRESH_LOW 0x32
>> +#define AL3320A_REG_HIGH_THRESH_HIGH 0x33
>> +
>> +#define AL3320A_CONFIG_DISABLE 0x00
>> +#define AL3320A_CONFIG_ENABLE 0x01
>> +
>> +#define AL3320A_GAIN_SHIFT 1
>> +#define AL3320A_GAIN_MASK (BIT(2) | BIT(1))
>> +
>> +/* chip params default values */
>> +#define AL3320A_DEFAULT_MEAN_TIME 4
>> +#define AL3320A_DEFAULT_WAIT_TIME 0 /* no waiting */
>> +
>> +#define AL3320A_SCALE_AVAILABLE "0.512 0.128 0.032 0.01"
>> +
>> +enum al3320a_range {
>> + AL3320A_RANGE_1, /* 33.28 Klx */
>> + AL3320A_RANGE_2, /* 8.32 Klx */
>> + AL3320A_RANGE_3, /* 2.08 Klx */
>> + AL3320A_RANGE_4 /* 0.65 Klx */
>> +};
>> +
>> +static const int al3320a_scales[][2] = {
>> + {0, 512000}, {0, 128000}, {0, 32000}, {0, 10000}
>> +};
>> +
>> +struct al3320a_data {
>> + struct i2c_client *client;
>> +};
>> +
>> +static const struct iio_chan_spec al3320a_channels[] = {
>> + {
>> + .type = IIO_LIGHT,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + }
>> +};
>> +
>> +static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE);
>> +
>> +static struct attribute *al3320a_attributes[] = {
>> + &iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
>> + NULL,
>> +};
>> +
>> +static const struct attribute_group al3320a_attribute_group = {
>> + .attrs = al3320a_attributes,
>> +};
>> +
>> +static int al3320a_init(struct al3320a_data *data)
>> +{
>> + int ret;
>> +
>> + /* power on */
>> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG,
>> + AL3320A_CONFIG_ENABLE);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE,
>> + AL3320A_RANGE_3 << AL3320A_GAIN_SHIFT);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME,
>> + AL3320A_DEFAULT_MEAN_TIME);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT,
>> + AL3320A_DEFAULT_WAIT_TIME);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int al3320a_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int *val,
>> + int *val2, long mask)
>> +{
>> + struct al3320a_data *data = iio_priv(indio_dev);
>> + int ret;
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_RAW:
>> + /*
>> + * ALS ADC value is stored in two adjacent registers:
>> + * - low byte of output is stored at AL3320A_REG_DATA_LOW
>> + * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
>> + */
>> + ret = i2c_smbus_read_word_data(data->client,
>> + AL3320A_REG_DATA_LOW);
>> + if (ret < 0)
>> + return ret;
>> + *val = ret;
>> + return IIO_VAL_INT;
>> + case IIO_CHAN_INFO_SCALE:
>> + ret = i2c_smbus_read_byte_data(data->client,
>> + AL3320A_REG_CONFIG_RANGE);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = (ret & AL3320A_GAIN_MASK) >> AL3320A_GAIN_SHIFT;
>> + *val = al3320a_scales[ret][0];
>> + *val2 = al3320a_scales[ret][1];
>> +
>> + return IIO_VAL_INT_PLUS_MICRO;
>> + }
>> + return -EINVAL;
>> +}
>> +
>> +static int al3320a_write_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int val,
>> + int val2, long mask)
>> +{
>> + struct al3320a_data *data = iio_priv(indio_dev);
>> + int i;
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_SCALE:
>> + for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
>> + if (val == al3320a_scales[i][0] &&
>> + val2 == al3320a_scales[i][1])
>> + return i2c_smbus_write_byte_data(data->client,
>> + AL3320A_REG_CONFIG_RANGE,
>> + i << AL3320A_GAIN_SHIFT);
>> + }
>> + break;
>> + }
>> + return -EINVAL;
>> +}
>> +
>> +static const struct iio_info al3320a_info = {
>> + .driver_module = THIS_MODULE,
>> + .read_raw = al3320a_read_raw,
>> + .write_raw = al3320a_write_raw,
>> + .attrs = &al3320a_attribute_group,
>> +};
>> +
>> +static int al3320a_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct al3320a_data *data;
>> + struct iio_dev *indio_dev;
>> + int ret;
>> +
>> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + data = iio_priv(indio_dev);
>> + i2c_set_clientdata(client, indio_dev);
>> + data->client = client;
>> +
>> + indio_dev->dev.parent = &client->dev;
>> + indio_dev->info = &al3320a_info;
>> + indio_dev->name = AL3320A_DRV_NAME;
>> + indio_dev->channels = al3320a_channels;
>> + indio_dev->num_channels = ARRAY_SIZE(al3320a_channels);
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> +
>> + ret = al3320a_init(data);
>> + if (ret < 0) {
>> + dev_err(&client->dev, "al3320a chip init failed\n");
>> + return ret;
>> + }
>> + return devm_iio_device_register(&client->dev, indio_dev);
>> +}
>> +
>> +static int al3320a_remove(struct i2c_client *client)
>> +{
>> + return i2c_smbus_write_byte_data(client, AL3320A_REG_CONFIG,
>> + AL3320A_CONFIG_DISABLE);
>> +}
>> +
>> +static const struct i2c_device_id al3320a_id[] = {
>> + {"al3320a", 0},
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(i2c, al3320a_id);
>> +
>> +static struct i2c_driver al3320a_driver = {
>> + .driver = {
>> + .name = AL3320A_DRV_NAME,
>> + },
>> + .probe = al3320a_probe,
>> + .remove = al3320a_remove,
>> + .id_table = al3320a_id,
>> +};
>> +
>> +module_i2c_driver(al3320a_driver);
>> +
>> +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
>> +MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
>> +MODULE_LICENSE("GPL v2");
>>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v7] iio: Add Dyna-Image AL3320A ambient light sensor driver
2014-09-10 19:28 ` Jonathan Cameron
@ 2014-09-10 19:36 ` Daniel Baluta
0 siblings, 0 replies; 4+ messages in thread
From: Daniel Baluta @ 2014-09-10 19:36 UTC (permalink / raw)
To: Jonathan Cameron
Cc: Hartmut Knaack, Daniel Baluta, linux-iio, Peter Meerwald,
Linux Kernel Mailing List, Tsechih_Lin
On Wed, Sep 10, 2014 at 10:28 PM, Jonathan Cameron <jic23@kernel.org> wrote:
> On 10/09/14 18:57, Hartmut Knaack wrote:
>> Daniel Baluta schrieb, Am 10.09.2014 08:57:
>>> Minimal implementation. This driver provides raw illuminance readings.
>>>
>>> This is based on drivers/hwmon/al3320.c (*) driver from msm tree written
>>> by Tsechih Lin <Tsechih_Lin@asus.com>
>>>
>>> * https://android.googlesource.com/kernel/msm.git
>>>
>>> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
>> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
> Thanks Daniel.
> Also thanks to Hartmut for reviewing stamina.
>
> I've been effectively offline for a 10 days (some of it spent in a fridge)
> so am even more grateful to those who help with reviewing than normal.
>
> Applied to the togreg branch of iio.git which I will push out as testing
> for the autobuilders to play when not in an airport departure lounge on the
> 30 mins of free airport wifi. What fun.
>
> I wonder if this will send?
Well, it's here ;). Have a nice flight!
thanks,
Daniel.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-09-10 19:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-10 6:57 [PATCH v7] iio: Add Dyna-Image AL3320A ambient light sensor driver Daniel Baluta
2014-09-10 17:57 ` Hartmut Knaack
2014-09-10 19:28 ` Jonathan Cameron
2014-09-10 19:36 ` Daniel Baluta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox