public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* Re: 2.2.19+ide: corrupts ide tape output
@ 2001-05-21 21:49 Mikael Pettersson
  2001-05-24 21:27 ` Camm Maguire
  0 siblings, 1 reply; 3+ messages in thread
From: Mikael Pettersson @ 2001-05-21 21:49 UTC (permalink / raw)
  To: camm, linux-kernel

On 21 May 2001 14:49:55 -0400, Camm Maguire <camm@enhanced.com> wrote:

>Greetings!  2.2.19+ide, applied the patch because this box has a new
>Promise PDC20267 ide controller.  14GB HP Colorado tape drive.  Before
>we installed the new ide controller and patched the kernel, i.e. with
>unpatched 2.2.19 running on a different ide controller, this setup
>works just fine.  Now I get the following occasionally, which results
>in corrupted dumps to tape:
>
>May 21 10:27:47 intech9 kernel: hdh: status error: status=0x40 { DriveReady }
>May 21 10:27:47 intech9 kernel: ide-scsi: Strange, packet command initiated yet DRQ isn't asserted

You added a Promise Ultra100 PCI card, right?
>From what I hear, it doesn't support ATAPI devices well, only disks.
So if you moved the HP tape drive to the PDC, move it back to
the mainboard's IDE controller.
Also, don't disable the mainboard's controller thinking you can save
some interrupts that way. Andre Hedrick (Linux IDE guy) once wrote
that this could cause the PDC to grab IRQ 14, which had some nasty
side-effects.

(My main box runs with disks on a Promise Ultra100 card and
ATAPI CD-RW and tape on the mainboard's IDE (440BX) controller.
Both 2.2+ide and 2.4 work fine.)

/Mikael

^ permalink raw reply	[flat|nested] 3+ messages in thread
* 2.2.19+ide: corrupts ide tape output
@ 2001-05-21 18:49 Camm Maguire
  0 siblings, 0 replies; 3+ messages in thread
From: Camm Maguire @ 2001-05-21 18:49 UTC (permalink / raw)
  To: linux-kernel


Greetings!  2.2.19+ide, applied the patch because this box has a new
Promise PDC20267 ide controller.  14GB HP Colorado tape drive.  Before
we installed the new ide controller and patched the kernel, i.e. with
unpatched 2.2.19 running on a different ide controller, this setup
works just fine.  Now I get the following occasionally, which results
in corrupted dumps to tape:

May 21 10:27:47 intech9 kernel: hdh: status error: status=0x40 { DriveReady }
May 21 10:27:47 intech9 kernel: ide-scsi: Strange, packet command initiated yet DRQ isn't asserted

Any advice much appreciated!

-- 
Camm Maguire			     			camm@enhanced.com
==========================================================================
"The earth is but one country, and mankind its citizens."  --  Baha'u'llah

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2001-05-24 21:28 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-05-21 21:49 2.2.19+ide: corrupts ide tape output Mikael Pettersson
2001-05-24 21:27 ` Camm Maguire
  -- strict thread matches above, loose matches on Subject: below --
2001-05-21 18:49 Camm Maguire

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox