public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: Peter Hurley <peter@hurleysoftware.com>,
	Udo van den Heuvel <udovdh@xs4all.nl>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Mauro Carvalho Chehab <m.chehab@samsung.com>,
	linux-media@vger.kernel.org
Subject: Re: 3.17.2. issue?
Date: Fri, 31 Oct 2014 18:47:44 +0100	[thread overview]
Message-ID: <5453CB40.8040303@xs4all.nl> (raw)
In-Reply-To: <5453C91D.9060702@hurleysoftware.com>

On 10/31/2014 06:38 PM, Peter Hurley wrote:
> [ +cc Hans Verkuil, Mauro Carvalho Chehab, linux-media ]

Fixed by this patch: https://patchwork.linuxtv.org/patch/26302/

Which is queued for 3.18. I think this should be backported
to 3.17 as well.

Regards,

	Hans

> 
> On 10/31/2014 11:43 AM, Udo van den Heuvel wrote:
>> Hello,
>>
>> Booting into 3.17.2 on one box I saw:
>>
>> [   15.070260] microcode: CPU0: patch_level=0x010000b7
>> [   15.279454] Linux video capture interface: v2.00
>> [   15.315043] microcode: CPU0: new patch_level=0x010000c7
>> [   15.319519] microcode: CPU1: patch_level=0x010000b7
>> [   15.323966] microcode: CPU1: new patch_level=0x010000c7
>> [   15.328493] microcode: Microcode Update Driver: v2.00
>> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>> [   15.750724] saa7146: register extension 'budget_av'
>> [   15.757205] ------------[ cut here ]------------
>> [   15.763300] WARNING: CPU: 0 PID: 468 at fs/proc/generic.c:341
>> __proc_create+0x1a4/0x1c0()
>> [   15.769475] name len 0
>> [   15.774046] Modules linked in: budget_av(+) saa7146_vv
>> videobuf_dma_sg videobuf_core v4l2_common videodev budget_core microcode
>> ttpci_eeprom saa7146 dvb_core snd_hda_codec_realtek snd_hda_codec_hdmi
>> snd_hda_codec_generic cp210x snd_hda_intel usbserial k10temp
>> snd_hda_controller evdev snd_hda_codec snd_seq snd_seq_device snd_pcm
>> i2c_piix4 snd_timer snd acpi_cpufreq processor button nfsd auth_rpcgss
>> oid_registry exportfs nfs_acl lockd sunrpc hid_generic usbhid hid
>> ata_generic ehci_pci ehci_hcd ohci_pci ohci_hcd sr_mod cdrom radeon
>> fbcon bitblit softcursor font cfbfillrect cfbimgblt cfbcopyarea
>> backlight drm_kms_helper ttm autofs4
>> [   15.794125] CPU: 0 PID: 468 Comm: systemd-udevd Not tainted
>> 3.17.2test-dirty #7
>> [   15.799155] Hardware name: To Be Filled By O.E.M. To Be Filled By
>> O.E.M./To be filled by O.E.M., BIOS 080015  05/04/2010
>> [   15.804586]  0000000000000009 ffffffff81461238 ffff8800cf69ba60
>> ffffffff81056271
>> [   15.809771]  ffff8800cf69bb00 ffff8800cf69bab0 0000000000000002
>> 000000000000416d
>> [   15.814957]  0000000000000000 ffffffff810562e7 ffffffff8156510b
>> ffffffff00000020
>> [   15.820188] Call Trace:
>> [   15.825314]  [<ffffffff81461238>] ? dump_stack+0x49/0x6a
>> [   15.830457]  [<ffffffff81056271>] ? warn_slowpath_common+0x81/0xb0
>> [   15.835535]  [<ffffffff810562e7>] ? warn_slowpath_fmt+0x47/0x50
>> [   15.840565]  [<ffffffff81179c74>] ? __proc_create+0x1a4/0x1c0
>> [   15.845613]  [<ffffffff81179f5f>] ? proc_mkdir_data+0x2f/0x70
>> [   15.850605]  [<ffffffff81092b74>] ? register_handler_proc+0x114/0x130
>> [   15.855497]  [<ffffffff8108f87b>] ? __setup_irq+0x3cb/0x500
>> [   15.860273]  [<ffffffffa0362da0>] ? saa7146_remove_one+0x1c0/0x1c0
>> [saa7146]
>> [   15.865007]  [<ffffffff8108fb21>] ? request_threaded_irq+0xd1/0x170
>> [   15.869728]  [<ffffffffa03630f3>] ? saa7146_init_one+0x103/0x740
>> [saa7146]
>> [   15.874377]  [<ffffffff81271158>] ? pci_device_probe+0x98/0xf0
>> [   15.878911]  [<ffffffff81305356>] ? driver_probe_device+0x86/0x270
>> [   15.883317]  [<ffffffff81305633>] ? __driver_attach+0x93/0xa0
>> [   15.887659]  [<ffffffff813055a0>] ? __device_attach+0x60/0x60
>> [   15.891919]  [<ffffffff81303653>] ? bus_for_each_dev+0x53/0x90
>> [   15.896107]  [<ffffffff81304b68>] ? bus_add_driver+0x188/0x240
>> [   15.900246]  [<ffffffffa0400000>] ? 0xffffffffa0400000
>> [   15.904359]  [<ffffffff813059e6>] ? driver_register+0x56/0xd0
>> [   15.908454]  [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0
>> [   15.912567]  [<ffffffff810b0774>] ? load_module+0x1c34/0x2190
>> [   15.916648]  [<ffffffff810ad3c0>] ? store_uevent+0x50/0x50
>> [   15.920716]  [<ffffffff810b0e25>] ? SyS_finit_module+0x85/0x90
>> [   15.924768]  [<ffffffff81466092>] ? system_call_fastpath+0x16/0x1b
>> [   15.928925] ---[ end trace b6ff19cfd9b0c411 ]---
>> [   15.932953] saa7146: found saa7146 @ mem ffffc90000020c00 (revision
>> 1, irq 20) (0x153b,0x1157)
>> [   15.937071] saa7146 (0): dma buffer size 192512
>> [   15.937071] saa7146 (0): dma buffer size 192512
>> [   15.941161] DVB: registering new adapter (Terratec Cinergy 1200 DVB-T)
>> [   15.981742] adapter failed MAC signature check
>> [   15.987499] encoded MAC from EEPROM was
>> ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
>> [   16.256557] budget_av: KNC1-0: MAC addr = 00:0a:ac:01:d6:87
>> [   16.617698] budget_av 0000:03:05.0: DVB: registering adapter 0
>> frontend 0 (Philips TDA10046H DVB-T)...
>> [   16.624394] budget_av: ci interface initialised
>> [   17.053409] EXT4-fs (dm-3): mounted filesystem with ordered data
>> mode. Opts: (null)
>>
>> What happened?
>>
>> Kind regards,
>> Udo
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


  reply	other threads:[~2014-10-31 17:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-31 15:43 3.17.2. issue? Udo van den Heuvel
2014-10-31 17:38 ` Peter Hurley
2014-10-31 17:47   ` Hans Verkuil [this message]
2014-10-31 18:05     ` Peter Hurley
2014-11-01  4:51     ` Udo van den Heuvel
2014-11-01  4:59       ` Udo van den Heuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5453CB40.8040303@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=m.chehab@samsung.com \
    --cc=peter@hurleysoftware.com \
    --cc=udovdh@xs4all.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox