Re: [PATCH v7 5/7] drm: bridge/dw-hdmi: add support for multi byte register width access

[Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>]

Hi Andy,

This patch adds the reg-io-width binding.

Hence the binding patch should come before it.


On 11/11/14 12:53, Andy Yan wrote:
> On rockchip rk3288, only word(32-bit) accesses are
> permitted for hdmi registers.  Byte width accesses (writeb,
> readb) generate an imprecise external abort.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> 
> ---
> 
>  }
>  
>  static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
> @@ -1499,6 +1527,23 @@ static int dw_hdmi_bind(struct device *dev, struct device *master, void *data)
>  	struct device_node *ddc_node;
>  	struct resource *iores;
>  	int ret, irq;
> +	u32 val = 1;
> +
> +	of_property_read_u32(np, "reg-io-width", &val);
> +
> +	switch (val) {
> +	case 4:
> +		hdmi->write = dw_hdmi_writel;
> +		hdmi->read = dw_hdmi_readl;
> +		break;
> +	case 1:
> +		hdmi->write = dw_hdmi_writeb;
> +		hdmi->read = dw_hdmi_readb;
> +		break;
> +	default:
> +		dev_err(dev, "reg-io-width must be 1 or 4\n");
> +		return -EINVAL;
> +	}

The binding patch says this is an optional property.
But here if undefined it returns -EINVAL.

I would keep it optional and default it to byte access.

Regards,
ZubairLK