Re: [PATCH v7 7/7] dt-bindings: add document for dw-hdmi

[Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>]

Hi Andy,

Some minor comments inline.

On 11/11/14 12:54, Andy Yan wrote:
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  .../devicetree/bindings/drm/bridge/dw-hdmi.txt     | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
> 
> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
> new file mode 100644
> index 0000000..aa7ed17
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
> @@ -0,0 +1,38 @@
> +DesignWare HDMI bridge bindings
> +
> +Required properities:
	
	    ^properties

> +- compatibel: platform specific such as "fsl,imx6q-hdmi","fsl,imx6dl-hdmi"

     ^compatible

> +	      "rockchip,rk3288-dw-hdmi"

This will need to come in a separate series which adds rk3288 hdmi support..

> +- reg: physical base address of the controller and length
> +- ddc-i2c-bus: the ddc i2c bus
> +- interrupts: The interrupt number to the cpu
> +
> +Optional properties
> +- reg-io-width: the width of the reg:1,4, default set to 1 if not present
> +
> +Example:
> +	hdmi: hdmi@0120000 {
> +		compatible = "fsl,imx6q-hdmi";
> +		reg = <0x00120000 0x9000>;
> +		interrupts = <0 115 0x04>;
> +		gpr = <&gpr>;
> +		clocks = <&clks 123>, <&clks 124>;
> +		clock-names = "iahb", "isfr";
> +		ddc-i2c-bus = <&i2c2>;
> +
> +		port@0 {
> +			reg = <0>;
> +
> +			hdmi_mux_0: endpoint {
> +				remote-endpoint = <&ipu1_di0_hdmi>;
> +			};
> +		};
> +
> +		port@1 {
> +			reg = <1>;
> +
> +			hdmi_mux_1: endpoint {
> +				remote-endpoint = <&ipu1_di1_hdmi>;
> +			};
> +		};
> +	};
> 

Thanks
ZubairLK