From: Marek Szyprowski <m.szyprowski@samsung.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Tomasz Figa <tomasz.figa@gmail.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
linux-samsung-soc@vger.kernel.org,
Russell King - ARM Linux <linux@arm.linux.org.uk>,
lauraa@codeaurora.org, linux-omap@vger.kernel.org,
linus.walleij@linaro.org, tony@atomide.com, drake@endlessm.com,
loeliger@gmail.com, Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs
Date: Fri, 14 Nov 2014 15:11:58 +0100 [thread overview]
Message-ID: <54660DAE.9090601@samsung.com> (raw)
In-Reply-To: <1415884694-5868-1-git-send-email-m.szyprowski@samsung.com>
Hello,
On 2014-11-13 14:18, Marek Szyprowski wrote:
> This is an updated patchset, which intends to add support for L2 cache
> on Exynos4 SoCs on boards running under secure firmware, which requires
> certain initialization steps to be done with help of firmware, as
> selected registers are writable only from secure mode.
>
> First four patches extend existing support for secure write in L2C driver
> to account for design of secure firmware running on Exynos. Namely:
> 1) direct read access to certain registers is needed on Exynos, because
> secure firmware calls set several registers at once,
> 2) not all boards are running secure firmware, so .write_sec callback
> needs to be installed in Exynos firmware ops initialization code,
> 3) write access to {DATA,TAG}_LATENCY_CTRL registers fron non-secure world
> is not allowed and so must use l2c_write_sec as well,
> 4) on certain boards, default value of prefetch register is incorrect
> and must be overridden at L2C initialization.
> For boards running with firmware that provides access to individual
> L2C registers this series should introduce no functional changes. However
> since the driver is widely used on other platforms I'd like to kindly ask
> any interested people for testing.
>
> Further three patches add implementation of .write_sec and .configure
> callbacks for Exynos secure firmware and necessary DT nodes to enable
> L2 cache.
>
> Changes in this version tested on Exynos4412-based TRATS2 and OdroidU3+
> boards (both with secure firmware). There should be no functional change
> for Exynos boards running without secure firmware. I do not have access
> to affected non-Exynos boards, so I could not test on them.
>
>
> Depends on:
> - [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
> (https://lkml.org/lkml/2014/8/26/445)
> available in samsung/pm2 branch in
> git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
> - L2C patches merged to v3.18-rc3
I assume that after all comments from previous versions, no more changes
are needed
to this patchset and I would really like to have it queued to v3.19.
Arnd, Olof: could you take this patchset thought arm-soc tree? It already
contains all dependencies.
Kukjin: could you ack this patchset?
> Changelog:
> Changes since v7:
> (https://lkml.org/lkml/2014/10/29/158)
> - rebased onto arm-soc/for-next kernel tree (depends on patches merged to
> v3.18-rc3 and arm-soc/samsung/pm2 branch)
> - removed 'ARM: l2c: unify L2C-310 OF initialization error messages' patch
> (no longer needed)
>
> Changes since v6:
> (https://lkml.org/lkml/2014/10/27/233)
> - changed PL310 to L2C-310 prefix in error messages
> - added patch shortening the error message about incorrect associativity
>
> Changes since v5:
> (https://lkml.org/lkml/2014/9/24/364)
> - rebased onto v3.18-rc2
> - added error message about missing properties values
>
> Changes since v4:
> (https://lkml.org/lkml/2014/8/26/461)
> - rewrote the code accessing l2x0_saved_regs from assembly code
> - added comment and reworked unconditional call to SMC_CMD_L2X0INVALL
>
>
> Patch summary:
>
> Tomasz Figa (7):
> ARM: l2c: Refactor the driver to use commit-like interface
> ARM: l2c: Add interface to ask hypervisor to configure L2C
> ARM: l2c: Get outer cache .write_sec callback from mach_desc only if
> not NULL
> ARM: l2c: Add support for overriding prefetch settings
> ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310
> ARM: EXYNOS: Add support for non-secure L2X0 resume
> ARM: dts: exynos4: Add nodes for L2 cache controller
>
> Documentation/devicetree/bindings/arm/l2cc.txt | 10 +
> arch/arm/boot/dts/exynos4210.dtsi | 9 +
> arch/arm/boot/dts/exynos4x12.dtsi | 14 ++
> arch/arm/include/asm/outercache.h | 3 +
> arch/arm/kernel/irq.c | 3 +-
> arch/arm/mach-exynos/firmware.c | 50 +++++
> arch/arm/mach-exynos/sleep.S | 46 +++++
> arch/arm/mm/cache-l2x0.c | 270 ++++++++++++++++---------
> 8 files changed, 309 insertions(+), 96 deletions(-)
>
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
next prev parent reply other threads:[~2014-11-14 14:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-13 13:18 [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs Marek Szyprowski
2014-11-13 13:18 ` [PATCH v8 1/7] ARM: l2c: Refactor the driver to use commit-like interface Marek Szyprowski
2014-11-13 13:18 ` [PATCH v8 2/7] ARM: l2c: Add interface to ask hypervisor to configure L2C Marek Szyprowski
2014-11-13 13:18 ` [PATCH v8 3/7] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL Marek Szyprowski
2014-11-13 13:18 ` [PATCH v8 4/7] ARM: l2c: Add support for overriding prefetch settings Marek Szyprowski
2014-11-13 13:18 ` [PATCH v8 5/7] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310 Marek Szyprowski
2014-11-13 13:18 ` [PATCH v8 6/7] ARM: EXYNOS: Add support for non-secure L2X0 resume Marek Szyprowski
2014-11-13 13:18 ` [PATCH v8 7/7] ARM: dts: exynos4: Add nodes for L2 cache controller Marek Szyprowski
2014-11-14 14:11 ` Marek Szyprowski [this message]
2014-11-14 14:51 ` [PATCH v8 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs Arnd Bergmann
2014-11-16 1:20 ` Kukjin Kim
2014-11-18 7:46 ` Marek Szyprowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54660DAE.9090601@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=arnd@arndb.de \
--cc=drake@endlessm.com \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=lauraa@codeaurora.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=loeliger@gmail.com \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=tomasz.figa@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox