From: Chanwoo Choi <cw00.choi@samsung.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>,
broonie@kernel.org, a.zummo@towertech.it, lgirdwood@gmail.com,
sbkim73@samsung.com, sameo@linux.intel.com,
geunsik.lim@samsung.com, inki.dae@samsung.com,
kyungmin.park@samsung.com, k.kozlowski@samsung.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCHv2 3/5] clk: s2mps11: Add the support for S2MPS13 PMIC clock
Date: Mon, 24 Nov 2014 18:00:50 +0900 [thread overview]
Message-ID: <5472F3C2.4030907@samsung.com> (raw)
In-Reply-To: <20141119164310.GH1875@x1>
Dear Lee,
Could you please apply this patchset on your tree
or Do we wait the Ack from RTC mainatiner for patch 4?
Best Regards,
Chanwoo Choi
On 11/20/2014 01:43 AM, Lee Jones wrote:
> On Tue, 18 Nov 2014, Mike Turquette wrote:
>
>> Quoting Chanwoo Choi (2014-11-18 00:59:41)
>>> This patch adds the support for S2MPS13 PMIC clock which is same with existing
>>> S2MPS14 RTC IP. But, S2MPS13 uses all of clocks (32khz_{ap|bt|cp}).
>>>
>>> Cc: Mike Turquette <mturquette@linaro.org>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>>> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>>
>> Applied to clk-next.
>
> I'm pretty sure you can't do that. You have a dependency on
> linux/mfd/samsung/s2mps13.h, which is satisfied in one of the earlier
> patches in the set. If you'd care to just provide an Ack for this
> patch, I can send you a pull-request with the decencies met.
>
>>> ---
>>> drivers/clk/clk-s2mps11.c | 24 ++++++++++++++++++++++++
>>> 1 file changed, 24 insertions(+)
>>>
>>> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
>>> index b7797fb..7bb13af 100644
>>> --- a/drivers/clk/clk-s2mps11.c
>>> +++ b/drivers/clk/clk-s2mps11.c
>>> @@ -23,6 +23,7 @@
>>> #include <linux/clk-provider.h>
>>> #include <linux/platform_device.h>
>>> #include <linux/mfd/samsung/s2mps11.h>
>>> +#include <linux/mfd/samsung/s2mps13.h>
>>> #include <linux/mfd/samsung/s2mps14.h>
>>> #include <linux/mfd/samsung/s5m8767.h>
>>> #include <linux/mfd/samsung/core.h>
>>> @@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
>>> },
>>> };
>>>
>>> +static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
>>> + [S2MPS11_CLK_AP] = {
>>> + .name = "s2mps13_ap",
>>> + .ops = &s2mps11_clk_ops,
>>> + .flags = CLK_IS_ROOT,
>>> + },
>>> + [S2MPS11_CLK_CP] = {
>>> + .name = "s2mps13_cp",
>>> + .ops = &s2mps11_clk_ops,
>>> + .flags = CLK_IS_ROOT,
>>> + },
>>> + [S2MPS11_CLK_BT] = {
>>> + .name = "s2mps13_bt",
>>> + .ops = &s2mps11_clk_ops,
>>> + .flags = CLK_IS_ROOT,
>>> + },
>>> +};
>>> +
>>> static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
>>> [S2MPS11_CLK_AP] = {
>>> .name = "s2mps14_ap",
>>> @@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>>> s2mps11_reg = S2MPS11_REG_RTC_CTRL;
>>> clks_init = s2mps11_clks_init;
>>> break;
>>> + case S2MPS13X:
>>> + s2mps11_reg = S2MPS13_REG_RTCCTRL;
>>> + clks_init = s2mps13_clks_init;
>>> + break;
>>> case S2MPS14X:
>>> s2mps11_reg = S2MPS14_REG_RTCCTRL;
>>> clks_init = s2mps14_clks_init;
>>> @@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
>>>
>>> static const struct platform_device_id s2mps11_clk_id[] = {
>>> { "s2mps11-clk", S2MPS11X},
>>> + { "s2mps13-clk", S2MPS13X},
>>> { "s2mps14-clk", S2MPS14X},
>>> { "s5m8767-clk", S5M8767X},
>>> { },
>
next prev parent reply other threads:[~2014-11-24 9:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-18 8:59 [PATCHv2 0/5] mfd: sec-core: Add support S2MPS13 PMIC device Chanwoo Choi
2014-11-18 8:59 ` [PATCHv2 1/5] mfd: sec-core: Add support for S2MPS13 device Chanwoo Choi
2014-11-25 15:50 ` Lee Jones
2014-11-18 8:59 ` [PATCHv2 2/5] regulator: s2mps11: Add support S2MPS13 regulator device Chanwoo Choi
2014-11-25 15:51 ` Lee Jones
2014-11-18 8:59 ` [PATCHv2 3/5] clk: s2mps11: Add the support for S2MPS13 PMIC clock Chanwoo Choi
2014-11-18 21:59 ` Mike Turquette
2014-11-19 16:43 ` Lee Jones
2014-11-24 9:00 ` Chanwoo Choi [this message]
2014-11-24 10:04 ` Lee Jones
2014-11-25 15:06 ` Chanwoo Choi
2014-11-25 15:51 ` Lee Jones
2014-11-18 8:59 ` [PATCHv2 4/5] rtc: s5m: Add the support for S2MPS13 RTC Chanwoo Choi
2014-11-24 10:46 ` Chanwoo Choi
2014-11-18 8:59 ` [PATCHv2 5/5] mfd: s2mps11: Add binding documentation for Samsung S2MPS13 PMIC Chanwoo Choi
2014-11-25 15:51 ` Lee Jones
2014-11-25 15:59 ` [GIT PULL] Immutable branch between MFD, Regulator and Clk, due for v3.19 Lee Jones
2014-11-29 5:13 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5472F3C2.4030907@samsung.com \
--to=cw00.choi@samsung.com \
--cc=a.zummo@towertech.it \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geunsik.lim@samsung.com \
--cc=inki.dae@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=sameo@linux.intel.com \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).