* [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device @ 2014-11-23 12:15 Dmitry Tunin 2014-11-23 14:56 ` Marcel Holtmann 0 siblings, 1 reply; 5+ messages in thread From: Dmitry Tunin @ 2014-11-23 12:15 UTC (permalink / raw) To: linux-bluetooth, linux-kernel Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver. /sys/kernel/debug/usb/devices T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3408 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin<hanipouspilot@gmail.com> --- diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index d85ced2..086240c 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x13d3, 0x3402) }, + { USB_DEVICE(0x13d3, 0x3408) }, { USB_DEVICE(0x13d3, 0x3432) }, /* Atheros AR5BBU12 with sflash firmware */ @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index edfc17b..091c813 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ -- Sry for confusing with wrong patches. Regards, Dmitry. ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device 2014-11-23 12:15 [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin @ 2014-11-23 14:56 ` Marcel Holtmann 2014-11-23 15:28 ` Dmitry Tunin 0 siblings, 1 reply; 5+ messages in thread From: Marcel Holtmann @ 2014-11-23 14:56 UTC (permalink / raw) To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel Hi Dmitry, > Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. > This bluetooth module requires loading patch and sysconfig by ath3k driver. > > /sys/kernel/debug/usb/devices > > T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=13d3 ProdID=3408 Rev= 0.02 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > Signed-off-by: Dmitry Tunin<hanipouspilot@gmail.com> space between the name and the email address. > > --- > > diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c > index d85ced2..086240c 100644 > --- a/drivers/bluetooth/ath3k.c > +++ b/drivers/bluetooth/ath3k.c > @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = { > { USB_DEVICE(0x13d3, 0x3375) }, > { USB_DEVICE(0x13d3, 0x3393) }, > { USB_DEVICE(0x13d3, 0x3402) }, > + { USB_DEVICE(0x13d3, 0x3408) }, > { USB_DEVICE(0x13d3, 0x3432) }, And your mail client messes up spaces vs tabs here. > > /* Atheros AR5BBU12 with sflash firmware */ > @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { > { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, > + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, > > /* Atheros AR5BBU22 with sflash firmware */ > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index edfc17b..091c813 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = { > { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, > + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, > > /* Atheros AR5BBU12 with sflash firmware */ Regards Marcel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device 2014-11-23 14:56 ` Marcel Holtmann @ 2014-11-23 15:28 ` Dmitry Tunin 2014-11-24 16:14 ` Dmitry Tunin 0 siblings, 1 reply; 5+ messages in thread From: Dmitry Tunin @ 2014-11-23 15:28 UTC (permalink / raw) To: Marcel Holtmann; +Cc: linux-bluetooth, linux-kernel Finally I figured out how to set up the mailer not to spoil everything. Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> --- diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index d85ced2..086240c 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x13d3, 0x3402) }, + { USB_DEVICE(0x13d3, 0x3408) }, { USB_DEVICE(0x13d3, 0x3432) }, /* Atheros AR5BBU12 with sflash firmware */ @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index edfc17b..091c813 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ -- 23.11.2014 17:56, Marcel Holtmann wrote: > Hi Dmitry, > >> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. >> This bluetooth module requires loading patch and sysconfig by ath3k driver. >> >> /sys/kernel/debug/usb/devices >> >> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0 >> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 >> P: Vendor=13d3 ProdID=3408 Rev= 0.02 >> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA >> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 >> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb >> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms >> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms >> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms >> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms >> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms >> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms >> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms >> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms >> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb >> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms >> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms >> >> Signed-off-by: Dmitry Tunin<hanipouspilot@gmail.com> > > space between the name and the email address. > >> >> --- >> >> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c >> index d85ced2..086240c 100644 >> --- a/drivers/bluetooth/ath3k.c >> +++ b/drivers/bluetooth/ath3k.c >> @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = { >> { USB_DEVICE(0x13d3, 0x3375) }, >> { USB_DEVICE(0x13d3, 0x3393) }, >> { USB_DEVICE(0x13d3, 0x3402) }, >> + { USB_DEVICE(0x13d3, 0x3408) }, >> { USB_DEVICE(0x13d3, 0x3432) }, > > And your mail client messes up spaces vs tabs here. > >> >> /* Atheros AR5BBU12 with sflash firmware */ >> @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { >> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, >> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, >> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, >> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, >> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, >> >> /* Atheros AR5BBU22 with sflash firmware */ >> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c >> index edfc17b..091c813 100644 >> --- a/drivers/bluetooth/btusb.c >> +++ b/drivers/bluetooth/btusb.c >> @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = { >> { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, >> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, >> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, >> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, >> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, >> >> /* Atheros AR5BBU12 with sflash firmware */ > > Regards > > Marcel > ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device 2014-11-23 15:28 ` Dmitry Tunin @ 2014-11-24 16:14 ` Dmitry Tunin 2014-11-25 1:40 ` Marcel Holtmann 0 siblings, 1 reply; 5+ messages in thread From: Dmitry Tunin @ 2014-11-24 16:14 UTC (permalink / raw) To: Marcel Holtmann; +Cc: linux-bluetooth, linux-kernel, stable Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver. CC: stable@vger.kernel.org Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> --- diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index d85ced2..086240c 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x13d3, 0x3402) }, + { USB_DEVICE(0x13d3, 0x3408) }, { USB_DEVICE(0x13d3, 0x3432) }, /* Atheros AR5BBU12 with sflash firmware */ @@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index edfc17b..091c813 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ -- Canonical people asked to CC: stable@vger.kernel.org Regards, Dmitry. ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device 2014-11-24 16:14 ` Dmitry Tunin @ 2014-11-25 1:40 ` Marcel Holtmann 0 siblings, 0 replies; 5+ messages in thread From: Marcel Holtmann @ 2014-11-25 1:40 UTC (permalink / raw) To: Dmitry Tunin; +Cc: linux-bluetooth, linux-kernel, stable Hi Dmitry, > Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. > This bluetooth module requires loading patch and sysconfig by ath3k driver. > > CC: stable@vger.kernel.org > Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> > > --- > > diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c > index d85ced2..086240c 100644 > --- a/drivers/bluetooth/ath3k.c > +++ b/drivers/bluetooth/ath3k.c > @@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = { > { USB_DEVICE(0x13d3, 0x3375) }, > { USB_DEVICE(0x13d3, 0x3393) }, > { USB_DEVICE(0x13d3, 0x3402) }, > + { USB_DEVICE(0x13d3, 0x3408) }, > { USB_DEVICE(0x13d3, 0x3432) }, please just send a clean v5 that I could apply. I have two v4 in my inbox now. Regards Marcel ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-11-25 1:40 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-11-23 12:15 [PATCH v4] ath3k: Add support of MCI 13d3:3408 bt device Dmitry Tunin 2014-11-23 14:56 ` Marcel Holtmann 2014-11-23 15:28 ` Dmitry Tunin 2014-11-24 16:14 ` Dmitry Tunin 2014-11-25 1:40 ` Marcel Holtmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox