From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>, <tony@atomide.com>, <sfr@canb.auug.org.au>
Cc: <linux-kernel@vger.kernel.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Vivek Gautam <gautam.vivek@samsung.com>,
<linux-usb@vger.kernel.org>, <andrew.kim@intel.com>
Subject: Re: [PATCH] arm: omap3: twl: remove usb phy init data
Date: Wed, 3 Dec 2014 11:11:09 +0530 [thread overview]
Message-ID: <547EA275.8050208@ti.com> (raw)
In-Reply-To: <1416410903-162369-5-git-send-email-heikki.krogerus@linux.intel.com>
Hi Greg,
On Monday 01 December 2014 02:14 PM, Kishon Vijay Abraham I wrote:
> From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
>
> The driver does no use it any more.
>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patch is required to get rid of the error that Stephen Rothwell reported.
Thanks
Kishon
> ---
> While this patch was part of the original series sent by Heikki, I couldn't
> get Ack from Tony to be merged this in my tree and I failed to catch the
> build error during my testing :-(
>
> This patch should fix the error pointed out by Stephen Rothwell.
> arch/arm/mach-omap2/twl-common.c:94:21: error: array type has incomplete element type
> struct phy_consumer consumers[] = {
> ^
> arch/arm/mach-omap2/twl-common.c | 12 +-----------
> include/linux/i2c/twl.h | 2 --
> 2 files changed, 1 insertion(+), 13 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
> index b0d54da..4457e73 100644
> --- a/arch/arm/mach-omap2/twl-common.c
> +++ b/arch/arm/mach-omap2/twl-common.c
> @@ -91,18 +91,8 @@ void __init omap_pmic_late_init(void)
> }
>
> #if defined(CONFIG_ARCH_OMAP3)
> -struct phy_consumer consumers[] = {
> - PHY_CONSUMER("musb-hdrc.0", "usb"),
> -};
> -
> -struct phy_init_data init_data = {
> - .consumers = consumers,
> - .num_consumers = ARRAY_SIZE(consumers),
> -};
> -
> static struct twl4030_usb_data omap3_usb_pdata = {
> - .usb_mode = T2_USB_MODE_ULPI,
> - .init_data = &init_data,
> + .usb_mode = T2_USB_MODE_ULPI,
> };
>
> static int omap3_batt_table[] = {
> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> index 8cfb50f..0bc03f1 100644
> --- a/include/linux/i2c/twl.h
> +++ b/include/linux/i2c/twl.h
> @@ -26,7 +26,6 @@
> #define __TWL_H_
>
> #include <linux/types.h>
> -#include <linux/phy/phy.h>
> #include <linux/input/matrix_keypad.h>
>
> /*
> @@ -634,7 +633,6 @@ enum twl4030_usb_mode {
> struct twl4030_usb_data {
> enum twl4030_usb_mode usb_mode;
> unsigned long features;
> - struct phy_init_data *init_data;
>
> int (*phy_init)(struct device *dev);
> int (*phy_exit)(struct device *dev);
>
next prev parent reply other threads:[~2014-12-03 5:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-19 15:28 [PATCHv5 0/7] phy: simplified phy lookup Heikki Krogerus
2014-11-19 15:28 ` [PATCHv5 1/7] phy: safer to_phy() macro Heikki Krogerus
2014-11-19 15:28 ` [PATCHv5 2/7] phy: improved lookup method Heikki Krogerus
2014-11-19 15:28 ` [PATCHv5 3/7] phy: twl4030: use the new " Heikki Krogerus
2014-11-19 15:28 ` [PATCHv5 4/7] arm: omap3: twl: remove usb phy init data Heikki Krogerus
2014-11-20 9:15 ` Kishon Vijay Abraham I
2014-12-03 5:41 ` Kishon Vijay Abraham I [this message]
2014-12-03 16:17 ` [PATCH] " Greg KH
2014-11-19 15:28 ` [PATCHv5 5/7] phy: remove the old lookup method Heikki Krogerus
2014-11-19 15:28 ` [PATCHv5 6/7] base: platform: name the device already during allocation Heikki Krogerus
2014-11-20 9:21 ` Kishon Vijay Abraham I
2015-02-02 12:12 ` Vivek Gautam
2014-11-19 15:28 ` [PATCHv5 7/7] usb: dwc3: host: convey the PHYs to xhci Heikki Krogerus
2014-11-20 11:29 ` [PATCHv5 0/7] phy: simplified phy lookup Vivek Gautam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=547EA275.8050208@ti.com \
--to=kishon@ti.com \
--cc=andrew.kim@intel.com \
--cc=gautam.vivek@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox