From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751794AbaLCG3H (ORCPT ); Wed, 3 Dec 2014 01:29:07 -0500 Received: from mailout3.samsung.com ([203.254.224.33]:38837 "EHLO mailout3.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751685AbaLCG3F convert rfc822-to-8bit (ORCPT ); Wed, 3 Dec 2014 01:29:05 -0500 X-AuditID: cbfee68d-f79296d000004278-11-547eadaed5a0 MIME-version: 1.0 Content-type: text/plain; charset=UTF-8; format=flowed Content-transfer-encoding: 8BIT Message-id: <547EADAD.9060100@samsung.com> Date: Wed, 03 Dec 2014 15:29:01 +0900 From: Jaewon Kim User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 To: Dmitry Torokhov Cc: Kukjin Kim , linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-input@vger.kernel.org, Hyunhee Kim Subject: Re: [PATCH v4 1/2] Input: add regulator haptic driver References: <1417399873-19575-1-git-send-email-jaewon02.kim@samsung.com> <1417399873-19575-2-git-send-email-jaewon02.kim@samsung.com> <20141203060247.GE7411@dtor-glaptop> In-reply-to: <20141203060247.GE7411@dtor-glaptop> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFlrLIsWRmVeSWpSXmKPExsWyRsSkWHfd2roQg7U3RCwOL3rBaPH5Qwu7 Re+Cq2wWNz99Y7W4vGsOm8WM8/uYHNg8ds66y+7Rt2UVo8fnTXIBzFFcNimpOZllqUX6dglc GeeXnWUruJReMWv+JMYGxi8hXYycHBICJhKnzs9ghrDFJC7cW8/WxcjFISSwlFFi6elDjF2M HGBFEyc6QMSnM0o8+P6QFaSBV0BQ4sfkeywgNrOAmcSjlnXMELaoxKJVp9ghbG2JZQtfM0M0 v2aUOLn7FBvIUF4BLYmrF0RAalgEVCUm9x8Em8kGVP99/WIwW1QgQuLKmjmMILaIgL7E9tm/ GEHmMAusZ5RoeHYVbIGwgJ3E7S9PWSEWrGOUuHZgBRtIglPAUKJx/WywzRICh9glZjRMY4RY JyDxbfIhFojXZCU2HYB6X1Li4IobLBMYxWcheW4WkudmIXluFpLnFjCyrGIUTS1ILihOSi8y 1CtOzC0uzUvXS87P3cQIjMXT/5717mC8fcD6EKMAB6MSD69FXF2IEGtiWXFl7iFGU6CLJjJL iSbnAyM+ryTe0NjMyMLUxNTYyNzSTEmcV1HqZ7CQQHpiSWp2ampBalF8UWlOavEhRiYOTqkG xmsNDMd/lXf2CH8Vq7y8dKVEsZRg9IXJ4TyJ9p29m5wD7mYIzeFhWlHh+O/ukaDvTVdKfjyb zDHRao/Q1/DrAZLNryYaiJU/qUiS5Bf8eLr4uMONhR/9S743Hb56vP3QJzWP/9vS1vukmlkp nlKRcmk8ZPzZgiUyweOyuLGkvvv27gURd40mK7EUZyQaajEXFScCABx5/J3AAgAA X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFrrLIsWRmVeSWpSXmKPExsVy+t9jQd11a+tCDK4s47I4vOgFo8XnDy3s Fr0LrrJZ3Pz0jdXi8q45bBYzzu9jcmDz2DnrLrtH35ZVjB6fN8kFMEc1MNpkpCampBYppOYl 56dk5qXbKnkHxzvHm5oZGOoaWlqYKynkJeam2iq5+AToumXmAC1WUihLzCkFCgUkFhcr6dth mhAa4qZrAdMYoesbEgTXY2SABhLWMGas+b+EpWBNWsXP/d3sDYzngrsYOTgkBEwkJk506GLk BDLFJC7cW8/WxcjFISQwnVHiwfeHrCAJXgFBiR+T77GA1DMLyEscuZQNEmYWMJN41LKOGaL+ NaPEyd2n2EBqeAW0JK5eEAGpYRFQlZjcfxBsDJuAtsT39YvBbFGBCIkra+YwgtgiAvoS22f/ YgSZwyywnlGi4dlVdpCEsICdxO0vT1khFqxjlLh2YAUbSIJTwFCicf1s5gmMArOQ3DcL4b5Z SO5bwMi8ilE0tSC5oDgpPddQrzgxt7g0L10vOT93EyM4ap9J7WBc2WBxiFGAg1GJh9ciri5E iDWxrLgy9xCjBAezkgjvjxagEG9KYmVValF+fFFpTmrxIUZToPcmMkuJJucDE0peSbyhsYmZ kaWRuaGFkbG5kjjvjZu5IUIC6YklqdmpqQWpRTB9TBycUg2MmzPtst6nlDh5/hDcG1vkvdA6 8xGzqmShabpEb/Q82ZeB63wmW5t47nRw4jrH+jwttePDxqdvWyuap9r+mrTg+uaqiq49SbYv A286h8nUhVwJ5JCMSxI/cPXzvlqp/QtiJ7Jt7c0r2hR73J3nc4bZpp+BKfs2LkudEqz15Edh xKQTglkuxseUWIozEg21mIuKEwHF42X58AIAAA== DLP-Filter: Pass X-MTR: 20000000000000000@CPGS X-CFilter-Loop: Reflected Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Dmitry, 2014년 12월 03일 15:02에 Dmitry Torokhov 이(가) 쓴 글: > Hi Jaewon, > > On Mon, Dec 01, 2014 at 11:11:12AM +0900, Jaewon Kim wrote: >> This patch adds support for haptic driver controlled by >> voltage of regulator. And this driver support for >> Force Feedback interface from input framework >> >> Signed-off-by: Jaewon Kim >> Signed-off-by: Hyunhee Kim >> Acked-by: Kyungmin Park >> Tested-by: Chanwoo Choi >> Reviewed-by: Chanwoo Choi >> Reviewed-by: Pankaj Dubey >> --- >> .../devicetree/bindings/input/regulator-haptic.txt | 21 ++ >> drivers/input/misc/Kconfig | 11 + >> drivers/input/misc/Makefile | 1 + >> drivers/input/misc/regulator-haptic.c | 247 ++++++++++++++++++++ >> include/linux/input/regulator-haptic.h | 31 +++ >> 5 files changed, 311 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/regulator-haptic.txt >> create mode 100644 drivers/input/misc/regulator-haptic.c >> create mode 100644 include/linux/input/regulator-haptic.h >> >> diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.txt b/Documentation/devicetree/bindings/input/regulator-haptic.txt >> new file mode 100644 >> index 0000000..3ed1c7e >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/regulator-haptic.txt >> @@ -0,0 +1,21 @@ >> +* Regulator Haptic Device Tree Bindings >> + >> +Required Properties: >> + - compatible : Should be "regulator-haptic" >> + - haptic-supply : Power supply to the haptic motor. >> + [*] refer Documentation/devicetree/bindings/regulator/regulator.txt >> + >> + - max-microvolt : The maximum voltage value supplied to the haptic motor. >> + [The unit of the voltage is a micro] >> + >> + - min-microvolt : The minimum voltage value supplied to the haptic motor. >> + [The unit of the voltage is a micro] >> + >> +Example: >> + >> + haptics { >> + compatible = "regulator-haptic"; >> + haptic-supply = <&motor_regulator>; >> + max-microvolt = <2700000>; >> + min-microvolt = <1100000>; >> + }; >> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig >> index 23297ab..e5e556d 100644 >> --- a/drivers/input/misc/Kconfig >> +++ b/drivers/input/misc/Kconfig >> @@ -394,6 +394,17 @@ config INPUT_CM109 >> To compile this driver as a module, choose M here: the module will be >> called cm109. >> >> +config INPUT_REGULATOR_HAPTIC >> + tristate "regulator haptics support" >> + select INPUT_FF_MEMLESS >> + help >> + This option enables device driver support for the haptic controlled >> + by regulator. This driver supports ff-memless interface >> + from input framework. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called regulator-haptic. >> + >> config INPUT_RETU_PWRBUTTON >> tristate "Retu Power button Driver" >> depends on MFD_RETU >> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile >> index 19c7603..1f135af 100644 >> --- a/drivers/input/misc/Makefile >> +++ b/drivers/input/misc/Makefile >> @@ -53,6 +53,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o >> obj-$(CONFIG_INPUT_POWERMATE) += powermate.o >> obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o >> obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o >> +obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o >> obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o >> obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o >> obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o >> diff --git a/drivers/input/misc/regulator-haptic.c b/drivers/input/misc/regulator-haptic.c >> new file mode 100644 >> index 0000000..6bc8e45 >> --- /dev/null >> +++ b/drivers/input/misc/regulator-haptic.c >> @@ -0,0 +1,247 @@ >> +/* >> + * Regulator haptic driver >> + * >> + * Copyright (c) 2014 Samsung Electronics Co., Ltd. >> + * Author: Jaewon Kim >> + * Author: Hyunhee Kim >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#define MAX_MAGNITUDE_SHIFT 16 >> + >> +struct regulator_haptic { >> + struct device *dev; >> + struct input_dev *input_dev; >> + struct regulator *regulator; >> + struct work_struct work; >> + >> + bool enabled; >> + bool suspend_state; >> + unsigned int max_volt; >> + unsigned int min_volt; >> + unsigned int intensity; >> + unsigned int magnitude; >> +}; >> + >> +static void regulator_haptic_enable(struct regulator_haptic *haptic, bool state) >> +{ >> + int error; >> + >> + if (haptic->enabled == state) >> + return; >> + >> + if (state) >> + error = regulator_enable(haptic->regulator); >> + else >> + error = regulator_disable(haptic->regulator); >> + if (error) { >> + dev_err(haptic->dev, "cannot enable regulator\n"); >> + return; >> + } >> + >> + haptic->enabled = state; >> +} >> + >> +static void regulator_haptic_work(struct work_struct *work) >> +{ >> + struct regulator_haptic *haptic = container_of(work, >> + struct regulator_haptic, work); >> + int error; >> + >> + error = regulator_set_voltage(haptic->regulator, >> + haptic->intensity + haptic->min_volt, haptic->max_volt); >> + if (error) { >> + dev_err(haptic->dev, "cannot set regulator voltage\n"); >> + return; >> + } >> + >> + if (haptic->magnitude) >> + regulator_haptic_enable(haptic, true); >> + else >> + regulator_haptic_enable(haptic, false); >> +} >> + >> +static int regulator_haptic_play_effect(struct input_dev *input, void *data, >> + struct ff_effect *effect) >> +{ >> + struct regulator_haptic *haptic = input_get_drvdata(input); >> + u64 volt_mag_multi; >> + >> + haptic->magnitude = effect->u.rumble.strong_magnitude; >> + if (!haptic->magnitude) >> + haptic->magnitude = effect->u.rumble.weak_magnitude; >> + >> + >> + volt_mag_multi = (u64)(haptic->max_volt - haptic->min_volt) * >> + haptic->magnitude; >> + haptic->intensity = (unsigned int)(volt_mag_multi >> >> + MAX_MAGNITUDE_SHIFT); >> + >> + schedule_work(&haptic->work); >> + >> + return 0; >> +} >> + >> +static void regulator_haptic_close(struct input_dev *input) >> +{ >> + struct regulator_haptic *haptic = input_get_drvdata(input); >> + >> + cancel_work_sync(&haptic->work); >> + regulator_haptic_enable(haptic, false); >> +} >> + >> +#ifdef CONFIG_OF >> +static int regulator_haptic_parse_dt(struct regulator_haptic *haptic) >> +{ >> + struct device_node *node = haptic->dev->of_node; >> + int error; >> + >> + error = of_property_read_u32(node, "max-microvolt", &haptic->max_volt); >> + if (error) { >> + dev_err(haptic->dev, "cannot parse max-microvolt\n"); >> + return error; >> + } >> + >> + error = of_property_read_u32(node, "min-microvolt", &haptic->min_volt); >> + if (error) { >> + dev_err(haptic->dev, "cannot parse min-microvolt\n"); >> + return error; >> + } >> + >> + return 0; >> +} >> +#else >> +static int regulator_haptic_parse_dt(struct regulator_haptic *haptic) >> +{ >> + return 0; >> +} >> +#endif /* CONFIG_OF */ >> + >> +static int regulator_haptic_probe(struct platform_device *pdev) >> +{ >> + struct regulator_haptic *haptic; >> + struct regulator_haptic_data *data; >> + struct input_dev *input_dev; >> + int error; >> + >> + haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL); >> + if (!haptic) >> + return -ENOMEM; >> + >> + haptic->dev = &pdev->dev; >> + haptic->enabled = false; >> + haptic->suspend_state = false; >> + INIT_WORK(&haptic->work, regulator_haptic_work); >> + >> + if (pdev->dev.of_node) { >> + error = regulator_haptic_parse_dt(haptic); >> + if (error) { >> + dev_err(&pdev->dev, "failed to parse device tree\n"); >> + return error; >> + } >> + } else { >> + data = dev_get_platdata(&pdev->dev); >> + if (data) { >> + dev_err(&pdev->dev, "failed to get platdata\n"); >> + return -EINVAL; >> + } >> + >> + haptic->regulator = data->regulator; >> + haptic->max_volt = data->max_volt; >> + haptic->min_volt = data->min_volt; > Please give preference to platform data if supplied, and if not then try > fetching settings from device tree. Ok. i will give prefrence to platform data in next version. > >> + } >> + >> + haptic->regulator = devm_regulator_get_exclusive(&pdev->dev, "haptic"); >> + if (IS_ERR(haptic->regulator)) { >> + dev_err(&pdev->dev, "failed to get regulator\n"); >> + return PTR_ERR(haptic->regulator); >> + } >> + >> + input_dev = devm_input_allocate_device(&pdev->dev); >> + if (!input_dev) >> + return -ENOMEM; >> + >> + haptic->input_dev = input_dev; >> + haptic->input_dev->name = "regulator-haptic"; >> + haptic->input_dev->dev.parent = &pdev->dev; >> + haptic->input_dev->close = regulator_haptic_close; >> + input_set_drvdata(haptic->input_dev, haptic); >> + input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE); >> + >> + error = input_ff_create_memless(input_dev, NULL, >> + regulator_haptic_play_effect); >> + if (error) { >> + dev_err(&pdev->dev, "failed to create force-feedback\n"); >> + return error; >> + } >> + >> + error = input_register_device(haptic->input_dev); >> + if (error) { >> + dev_err(&pdev->dev, "failed to register input device\n"); >> + return error; >> + } >> + >> + platform_set_drvdata(pdev, haptic); >> + >> + return 0; >> +} >> + >> +static int __maybe_unused regulator_haptic_suspend(struct device *dev) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + struct regulator_haptic *haptic = platform_get_drvdata(pdev); >> + >> + if (haptic->enabled) { > You need to protect this code from racing with the work item. > >> + regulator_haptic_enable(haptic, false); >> + haptic->suspend_state = true; >> + } >> + >> + return 0; >> +} >> + >> +static int __maybe_unused regulator_haptic_resume(struct device *dev) >> +{ >> + struct platform_device *pdev = to_platform_device(dev); >> + struct regulator_haptic *haptic = platform_get_drvdata(pdev); >> + >> + if (haptic->suspend_state) { >> + regulator_haptic_enable(haptic, true); >> + haptic->suspend_state = false; >> + } >> + >> + return 0; >> +} >> + >> +static SIMPLE_DEV_PM_OPS(regulator_haptic_pm_ops, >> + regulator_haptic_suspend, regulator_haptic_resume); >> + >> +static struct of_device_id regulator_haptic_dt_match[] = { >> + { .compatible = "regulator-haptic" }, >> + { /* sentinel */ }, >> +}; >> + >> +static struct platform_driver regulator_haptic_driver = { >> + .probe = regulator_haptic_probe, >> + .driver = { >> + .name = "regulator-haptic", >> + .of_match_table = regulator_haptic_dt_match, >> + .pm = ®ulator_haptic_pm_ops, >> + }, >> +}; >> +module_platform_driver(regulator_haptic_driver); >> + >> +MODULE_AUTHOR("Jaewon Kim "); >> +MODULE_AUTHOR("Hyunhee Kim "); >> +MODULE_DESCRIPTION("Regulator haptic driver"); >> +MODULE_LICENSE("GPL"); >> diff --git a/include/linux/input/regulator-haptic.h b/include/linux/input/regulator-haptic.h >> new file mode 100644 >> index 0000000..05ae038 >> --- /dev/null >> +++ b/include/linux/input/regulator-haptic.h >> @@ -0,0 +1,31 @@ >> +/* >> + * Regulator Haptic Platform Data >> + * >> + * Copyright (c) 2014 Samsung Electronics Co., Ltd. >> + * Author: Jaewon Kim >> + * Author: Hyunhee Kim >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#ifndef _REGULATOR_HAPTIC_H >> +#define _REGULATOR_HAPTIC_H >> + >> +/* >> + * struct regulator_haptic_data - Platform device data >> + * >> + * @regulator: Power supply to the haptic motor >> + * @max_volt: maximum voltage value supplied to the haptic motor. >> + * >> + * @min_volt: minimum voltage value supplied to the haptic motor. >> + * >> + */ >> +struct regulator_haptic_data { >> + struct regulator *regulator; >> + unsigned int max_volt; >> + unsigned int min_volt; >> +}; >> + >> +#endif /* _REGULATOR_HAPTIC_H */ >> -- >> 1.7.9.5 >> > Thanks. > Thanks. Jaewon Kim.