From: Guenter Roeck <linux@roeck-us.net>
To: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Benoit Cousson <bcousson@baylibre.com>,
Patrick Titiano <ptitiano@baylibre.com>,
LM Sensors <lm-sensors@lm-sensors.org>
Subject: Re: [PATCH 1/2] hwmon: tmp401: add support for TI TMP435
Date: Thu, 04 Dec 2014 06:19:24 -0800 [thread overview]
Message-ID: <54806D6C.7060009@roeck-us.net> (raw)
In-Reply-To: <1417687048-21455-2-git-send-email-bgolaszewski@baylibre.com>
On 12/04/2014 01:57 AM, Bartosz Golaszewski wrote:
> From: Patrick Titiano <ptitiano@baylibre.com>
>
> Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/hwmon/tmp401.c | 16 ++++++++++++++--
Please also update Kconfig and Documentation/hwmon/tmp401.
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
> index 7fa6e7d..5a72d7f 100644
> --- a/drivers/hwmon/tmp401.c
> +++ b/drivers/hwmon/tmp401.c
> @@ -8,6 +8,9 @@
> * Cleanup and support for TMP431 and TMP432 by Guenter Roeck
> * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
> *
> + * Support for TMP435 by Patrick Titiano
> + * Copyright (c) 2014 Patrick Titiano <ptitiano@baylibre.com>
> + *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> * the Free Software Foundation; either version 2 of the License, or
> @@ -46,7 +49,7 @@
> /* Addresses to scan */
> static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
>
> -enum chips { tmp401, tmp411, tmp431, tmp432 };
> +enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
>
> /*
> * The TMP401 registers, note some registers have different addresses for
> @@ -136,6 +139,7 @@ static const u8 TMP432_STATUS_REG[] = {
> #define TMP411C_DEVICE_ID 0x10
> #define TMP431_DEVICE_ID 0x31
> #define TMP432_DEVICE_ID 0x32
> +#define TMP435_DEVICE_ID 0x35
The datasheet claims otherwise (0x31, specifically).
Is this based on real chip information ?
Can you send me the output from i2cdump for the chip ?
Thanks,
Guenter
>
> /*
> * Driver data (common to all clients)
> @@ -146,6 +150,7 @@ static const struct i2c_device_id tmp401_id[] = {
> { "tmp411", tmp411 },
> { "tmp431", tmp431 },
> { "tmp432", tmp432 },
> + { "tmp435", tmp435 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, tmp401_id);
> @@ -684,6 +689,11 @@ static int tmp401_detect(struct i2c_client *client,
> return -ENODEV;
> kind = tmp432;
> break;
> + case TMP435_DEVICE_ID:
> + if (client->addr != 0x4c)
> + return -ENODEV;
> + kind = tmp435;
> + break;
> default:
> return -ENODEV;
> }
> @@ -705,7 +715,9 @@ static int tmp401_detect(struct i2c_client *client,
> static int tmp401_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> - const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
> + static const char *names[] = {
> + "TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
> + };
> struct device *dev = &client->dev;
> struct device *hwmon_dev;
> struct tmp401_data *data;
>
next prev parent reply other threads:[~2014-12-04 14:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 9:57 [PATCH 0/2] hwmon: tmp401: support for TMP435 and fix for a probe issue Bartosz Golaszewski
2014-12-04 9:57 ` [PATCH 1/2] hwmon: tmp401: add support for TI TMP435 Bartosz Golaszewski
2014-12-04 14:19 ` Guenter Roeck [this message]
2014-12-04 14:33 ` Bartosz Golaszewski
2014-12-04 17:32 ` [lm-sensors] " Jean Delvare
2014-12-04 18:42 ` Guenter Roeck
2014-12-04 9:57 ` [PATCH 2/2] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors Bartosz Golaszewski
2014-12-04 14:20 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54806D6C.7060009@roeck-us.net \
--to=linux@roeck-us.net \
--cc=bcousson@baylibre.com \
--cc=bgolaszewski@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=ptitiano@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox