From: Guenter Roeck <linux@roeck-us.net>
To: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Benoit Cousson <bcousson@baylibre.com>,
Patrick Titiano <ptitiano@baylibre.com>,
LM Sensors <lm-sensors@lm-sensors.org>
Subject: Re: [PATCH 2/2] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors
Date: Thu, 04 Dec 2014 06:20:57 -0800 [thread overview]
Message-ID: <54806DC9.9040704@roeck-us.net> (raw)
In-Reply-To: <1417687048-21455-3-git-send-email-bgolaszewski@baylibre.com>
On 12/04/2014 01:57 AM, Bartosz Golaszewski wrote:
> The return value of i2c_smbus_read_byte_data() is checked in
> tmp401_init_client(), but only a warning is printed and the device is
> registered anyway. This leads to devices being registered even if they
> cannot be physically detected.
>
> Bail-out from probe in case of write errors and notify the user.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/hwmon/tmp401.c | 16 ++++++++++------
> 1 file changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
> index 5a72d7f..75b3210 100644
> --- a/drivers/hwmon/tmp401.c
> +++ b/drivers/hwmon/tmp401.c
> @@ -618,8 +618,8 @@ static const struct attribute_group tmp432_group = {
> * Begin non sysfs callback code (aka Real code)
> */
>
> -static void tmp401_init_client(struct tmp401_data *data,
> - struct i2c_client *client)
> +static int tmp401_init_client(struct tmp401_data *data,
> + struct i2c_client *client)
> {
> int config, config_orig;
>
> @@ -630,8 +630,8 @@ static void tmp401_init_client(struct tmp401_data *data,
> /* Start conversions (disable shutdown if necessary) */
> config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
> if (config < 0) {
> - dev_warn(&client->dev, "Initialization failed!\n");
> - return;
> + dev_err(&client->dev, "Initialization failed!");
> + return config;
> }
>
> config_orig = config;
> @@ -639,6 +639,8 @@ static void tmp401_init_client(struct tmp401_data *data,
>
> if (config != config_orig)
> i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
No error check and return here ?
Guenter
> +
> + return 0;
> }
>
> static int tmp401_detect(struct i2c_client *client,
> @@ -721,7 +723,7 @@ static int tmp401_probe(struct i2c_client *client,
> struct device *dev = &client->dev;
> struct device *hwmon_dev;
> struct tmp401_data *data;
> - int groups = 0;
> + int groups = 0, status;
>
> data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
> if (!data)
> @@ -732,7 +734,9 @@ static int tmp401_probe(struct i2c_client *client,
> data->kind = id->driver_data;
>
> /* Initialize the TMP401 chip */
> - tmp401_init_client(data, client);
> + status = tmp401_init_client(data, client);
> + if (status < 0)
> + return status;
>
> /* Register sysfs hooks */
> data->groups[groups++] = &tmp401_group;
>
prev parent reply other threads:[~2014-12-04 14:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 9:57 [PATCH 0/2] hwmon: tmp401: support for TMP435 and fix for a probe issue Bartosz Golaszewski
2014-12-04 9:57 ` [PATCH 1/2] hwmon: tmp401: add support for TI TMP435 Bartosz Golaszewski
2014-12-04 14:19 ` Guenter Roeck
2014-12-04 14:33 ` Bartosz Golaszewski
2014-12-04 17:32 ` [lm-sensors] " Jean Delvare
2014-12-04 18:42 ` Guenter Roeck
2014-12-04 9:57 ` [PATCH 2/2] hwmon: tmp401: bail-out from tmp401_probe() in case of write errors Bartosz Golaszewski
2014-12-04 14:20 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54806DC9.9040704@roeck-us.net \
--to=linux@roeck-us.net \
--cc=bcousson@baylibre.com \
--cc=bgolaszewski@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=ptitiano@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox