From: Jonathan Cameron <jic23@kernel.org>
To: Daniel Baluta <daniel.baluta@intel.com>,
pmeerw@pmeerw.net, srinivas.pandruvada@linux.intel.com,
knaack.h@gmx.de
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/6] iio: imu: kmx61: Add acpi support
Date: Fri, 12 Dec 2014 13:35:47 +0000 [thread overview]
Message-ID: <548AEF33.4060209@kernel.org> (raw)
In-Reply-To: <1417613513-28285-3-git-send-email-daniel.baluta@intel.com>
On 03/12/14 13:31, Daniel Baluta wrote:
> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Applied to the togreg branch of iio.git
Thanks,
Jonathan
> ---
> drivers/iio/imu/kmx61.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c
> index 5b44371..893f7c8 100644
> --- a/drivers/iio/imu/kmx61.c
> +++ b/drivers/iio/imu/kmx61.c
> @@ -13,10 +13,13 @@
>
> #include <linux/module.h>
> #include <linux/i2c.h>
> +#include <linux/acpi.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
>
> #define KMX61_DRV_NAME "kmx61"
> +#define KMX61_GPIO_NAME "kmx61_int"
>
> #define KMX61_REG_WHO_AM_I 0x00
>
> @@ -573,6 +576,44 @@ static const struct iio_info kmx61_mag_info = {
> .attrs = &kmx61_mag_attribute_group,
> };
>
> +static const char *kmx61_match_acpi_device(struct device *dev)
> +{
> + const struct acpi_device_id *id;
> +
> + id = acpi_match_device(dev->driver->acpi_match_table, dev);
> + if (!id)
> + return NULL;
> + return dev_name(dev);
> +}
> +
> +static int kmx61_gpio_probe(struct i2c_client *client, struct kmx61_data *data)
> +{
> + struct device *dev;
> + struct gpio_desc *gpio;
> + int ret;
> +
> + if (!client)
> + return -EINVAL;
> +
> + dev = &client->dev;
> +
> + /* data ready gpio interrupt pin */
> + gpio = devm_gpiod_get_index(dev, KMX61_GPIO_NAME, 0);
> + if (IS_ERR(gpio)) {
> + dev_err(dev, "acpi gpio get index failed\n");
> + return PTR_ERR(gpio);
> + }
> +
> + ret = gpiod_direction_input(gpio);
> + if (ret)
> + return ret;
> +
> + ret = gpiod_to_irq(gpio);
> +
> + dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
> + return ret;
> +}
> +
> static struct iio_dev *kmx61_indiodev_setup(struct kmx61_data *data,
> const struct iio_info *info,
> const struct iio_chan_spec *chan,
> @@ -613,6 +654,13 @@ static int kmx61_probe(struct i2c_client *client,
>
> mutex_init(&data->lock);
>
> + if (id)
> + name = id->name;
> + else if (ACPI_HANDLE(&client->dev))
> + name = kmx61_match_acpi_device(&client->dev);
> + else
> + return -ENODEV;
> +
> data->acc_indio_dev =
> kmx61_indiodev_setup(data, &kmx61_acc_info,
> kmx61_acc_channels,
> @@ -633,6 +681,9 @@ static int kmx61_probe(struct i2c_client *client,
> if (ret < 0)
> return ret;
>
> + if (client->irq < 0)
> + client->irq = kmx61_gpio_probe(client, data);
> +
> ret = iio_device_register(data->acc_indio_dev);
> if (ret < 0) {
> dev_err(&client->dev, "Failed to register acc iio device\n");
> @@ -668,6 +719,13 @@ static int kmx61_remove(struct i2c_client *client)
> return 0;
> }
>
> +static const struct acpi_device_id kmx61_acpi_match[] = {
> + {"KMX61021", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, kmx61_acpi_match);
> +
> static const struct i2c_device_id kmx61_id[] = {
> {"kmx611021", 0},
> {}
> @@ -678,6 +736,7 @@ MODULE_DEVICE_TABLE(i2c, kmx61_id);
> static struct i2c_driver kmx61_driver = {
> .driver = {
> .name = KMX61_DRV_NAME,
> + .acpi_match_table = ACPI_PTR(kmx61_acpi_match),
> },
> .probe = kmx61_probe,
> .remove = kmx61_remove,
>
next prev parent reply other threads:[~2014-12-12 13:35 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-03 13:31 [PATCH v4 0/6] Add support for KMX61 sensor Daniel Baluta
2014-12-03 13:31 ` [PATCH v4 1/6] iio: imu: Add support for Kionix " Daniel Baluta
2014-12-12 13:32 ` Jonathan Cameron
2014-12-14 22:43 ` Hartmut Knaack
2014-12-15 10:50 ` Daniel Baluta
2014-12-03 13:31 ` [PATCH v4 2/6] iio: imu: kmx61: Add acpi support Daniel Baluta
2014-12-12 13:35 ` Jonathan Cameron [this message]
2014-12-03 13:31 ` [PATCH v4 3/6] iio: imu: kmx61: Add PM runtime support Daniel Baluta
2014-12-12 13:37 ` Jonathan Cameron
2014-12-14 22:55 ` Hartmut Knaack
2014-12-15 16:11 ` Daniel Baluta
2014-12-03 13:31 ` [PATCH v4 4/6] iio: imu: kmx61: Add PM sleep support Daniel Baluta
2014-12-12 13:45 ` Jonathan Cameron
2014-12-03 13:31 ` [PATCH v4 5/6] iio: imu: kmx61: Add support for data ready triggers Daniel Baluta
2014-12-12 13:49 ` Jonathan Cameron
2014-12-14 23:04 ` Hartmut Knaack
2014-12-03 13:31 ` [PATCH v4 6/6] iio: imu: kmx61: Add support for any motion trigger Daniel Baluta
2014-12-12 13:54 ` Jonathan Cameron
2014-12-15 23:19 ` Hartmut Knaack
2014-12-16 11:08 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=548AEF33.4060209@kernel.org \
--to=jic23@kernel.org \
--cc=daniel.baluta@intel.com \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox