From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752828AbbAMPqW (ORCPT ); Tue, 13 Jan 2015 10:46:22 -0500 Received: from rhcavspool01.kulnet.kuleuven.be ([134.58.240.193]:36544 "EHLO cavspool01.kulnet.kuleuven.be" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752208AbbAMPqU (ORCPT ); Tue, 13 Jan 2015 10:46:20 -0500 X-Greylist: delayed 316 seconds by postgrey-1.27 at vger.kernel.org; Tue, 13 Jan 2015 10:46:20 EST X-KULeuven-Envelope-From: bart.tanghe@thomasmore.be X-KULeuven-Scanned: Found to be clean X-KULeuven-ID: E09CA12833B.A5355 X-KULeuven-Information: Katholieke Universiteit Leuven Message-ID: <54B53C86.4030903@thomasmore.be> Date: Tue, 13 Jan 2015 16:40:54 +0100 X-Kuleuven: This mail passed the K.U.Leuven mailcluster From: Bart Tanghe User-Agent: Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 MIME-Version: 1.0 To: Stephen Warren , lee@kernel.org, devicetree@vger.kernel.org CC: thierry.reding@gmail.com, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH]dts: add bcm2835-pwm bindings References: <1420471983-29945-1-git-send-email-bart.tanghe@thomasmore.be> <54B1556C.7070401@wwwdotorg.org> In-Reply-To: <54B1556C.7070401@wwwdotorg.org> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 01/10/2015 05:38 PM, Stephen Warren wrote: > On 01/05/2015 08:33 AM, Bart Tanghe wrote: >> To probe the bcm2835-pwm driver properly, this dts bindings has to be added >> to the bcm2835 dtsi file. >> In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding. >> To change the status of the gpio pins into pwm output pins, some additional >> bindings has to be added but this has not to be done automatically. >> Is it possible to document this bindings somewhere? > > The pinctrl bindings allow you to do this. They're documented in: > > Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt > Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt > > pinctrl setup would typically be added to the board file (i.e. > arch/arm/boot/dts/bcm2835-rpi-b.dts) rather than the SoC file. I think > on the RPi, the pins that can generate PWM aren't dedicated to PWM by > the RPi board design (they could be GPIOs and probably other functions > too) so we probably need to leave it up to individual users to add PWM > configuration to their DT, if/when they use the PWM feature. > Indeed, the pins aren't dedicated to pwm and can be used for other functions. Is it usefull to add the pwm pinctrl description to Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt or is this useless? Regards, Bart